junior type orifice fitting - den holder type orifice fitting the den holder junior type orifice...

2
QUALITY CAN BE MEASURED JUNIOR TYPE ORIFICE FITTING The Den Holder Junior Type Orifice Fitting is a single chamber orifice fitting used with an interchangeable orifice plate and removable sealing O-rings.

Upload: vuongthien

Post on 17-Apr-2018

283 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: JUNIOR TYPE ORIFICE FITTING - DEN HOLDER TYPE ORIFICE FITTING The Den Holder Junior Type Orifice Fitting is a single chamber orifice fitting used with an interchangeable orifice plate

QUALITY CAN BE MEASURED

JUNIOR TYPE ORIFICE FITTINGThe Den Holder Junior Type Orifice Fitting is a single chamber orifice fitting used

with an interchangeable orifice plate and removable sealing O-rings.

Page 2: JUNIOR TYPE ORIFICE FITTING - DEN HOLDER TYPE ORIFICE FITTING The Den Holder Junior Type Orifice Fitting is a single chamber orifice fitting used with an interchangeable orifice plate

JUNIOR TYPE ORIFICE FITTINGThe Den Holder Junior Type Orifice Fitting is a single

chamber orifice fitting used with an interchangeable orifice

plate and removable sealing O-rings. It is designed for simple

and economical checking and replacement of an orifice plate

in orifice plate measurement installations. The few parts of the

fitting are: » the body » the sealing bar » the orifice plate

» the clamping bar with its sets of bolts » the drainplug

» the tapping plugs

The fitting may be installed in any position on either

horizontal or vertical pipelines. If the orifice plate is lifted

trough the top of the fitting, there is no spillage of liquid

service. Before changing plate, the pressure in the line or

meter tube must be relieved.

With the Den Holder Junior Type Orifice Fitting, checking and

replacement of the orifice plate has become a fast, one-man

job that only takes a few actions.

ORDERING DATADESIGN CODES » ISO 5167, ASME B31.3, Stoomwezen

Rules

LINE CONNECTIONS » BW » Flanged

CLASS »150 – 2500 #

FLANGE FACING » RF » RTJ

TYPE OF TAPPINGS » Flange tappings » Corner tappings

» Radius tappings » Pipe tappings

TAPPING SETS » Single » double

PROCESS CONNECTIONS » NPT threaded » Flanged

» Socket Weld » Butt Weld

MATERIAL » On request

OPTIONAL » Inspection by Lloyds, TüV or Stoomweze

» Strength and bore calculations » Gas calibration up to 50 bar

EUROPERivium Boulevard 1014817 ZJ BredaThe Netherlands

Phone +310)88 11 67 600Email: [email protected]

MIDDLE EASTP.O. Box 3949Abu Dhabi United Arab Emirates

Phone +971 24 493 841 Fax +971 24 493 824Email: [email protected]

PRECISION ENGINEERING FOR THE OIL AND GAS INDUSTRY

WWW.DENHOLDER.COM