june 2007 steel doorsets - acorn architectural ironmongery … doorsets contract series.pdf · (see...
TRANSCRIPT
Steel DoorsetsMartin Roberts Contract Series
June 2007
Uniclass EPIC
CI/SfB
L41122 D112
(31.5)
page 1
Steel DoorsetsFast Track
Our Fast Track Service simplifies doorset specification and speeds up delivery. By choosing from a pre-selected range of options this modular ordering system allows us to shorten the delivery time of our Martin Roberts Contract Series Steel Doorset and guarantees a high performance product at a competitive price. The service is targeted at customers who require fast turnaround, without compromising quality. Where lead times are critical, virtually any combination of doorset and pre-selected hardware set can normally be supplied and delivered on-site within 3 - 4 weeks of an order being placed. An extensive selection of quality steel doorsets is available to suit general purpose, fire, acoustic and thermal applications.
Ordering is made simple by faxing your requirements via the quotation request form to our dedicated Fast Track team on 01705 422463. We aim to provide a quotation within 24 hours.
The details provided on the following pages can be used as a simple menu from which you can select the options you require, from the structural opening size to the seals, louvre, vision panels and colours.
Select from a wide range of louvre and vision panel options and vision panel options and vi
To further simplify the specification process we offer a large number of pre-defined hardware sets to suit single or double fire resisting or non-fire doors. In all cases, we will supply the full hardware requirement for each doorset, including signage, to meet its application.
A detailed brochure on Contract Hardware sets is available.
Contract Series Steel Doorsets have been fire tested and certified by Bodycote Warringtonfire and acoustically tested at Salford University. Strength and durability testing was conducted at Chiltern Dynamics.
For further detailed technical information, please contact our sales team at Ingersoll Rand Security Technologies.
FM 27239
Stainless steel lever set from the Contract hardware series
4 Easy Steps to OrderingFast Track
page 2
1. Follow the steps outlined overleaf to complete the Fast Track quotation request form and fax to 01795 422463
2. We will price your requirements and advise delivery date.
3. Place your order.
4. Receive your doorsets within 3 weeks*.
* Lead times may vary upon volume and specification.
Our CSCS-Registered and Firas trained Site Managers have over 50 years' combined experience and are happy to provide a professional site survey, if required. We can also offer a full installation service.
Please contact our office for further information.
To simplify the process for you, we have pre-selected a number of standard hardware set functions suitable for the following door applications. Please refer to our separate Contract Hardware brochure for full information.
• Single doors, non-fire rated
• Single doors fire rated up to 2 hours
• Double doors, non-fire rated
• Double doors fire rated up to 2 hours
Ordering
Hardware Sets
Doors: • All door leaves are 50mm thick.
• Manufactured from 1.2mm thick zinc coated mild steel.
• True vertical lock seam joints.
• Top and bottom rails spot welded in position.
• Prepared for flush fitting hardware and suitably reinforced for surface mounted hardware supplied by Ingersoll Rand Security Technologies.
Frames: • Formed to standard profiles (see Step 5 overleaf).
• Manufactured from 1.6mm thick zinc coated mild steel.
• Supplied in knock-down form for ease of site assembly.
• Technical Data Sheets available on request.
Doors & Frames Technical Specification
2DFThe Contract Series hardware is a high quality range of Briton hardware selected for its high performance and durable finish.
Each item in the range is selected to satisfy the door sizes, weights and performance required. In all cases, we will supply the full hardware requirement for the door, pre-fixed in most cases, including the signs and symbols associated with the door and its application.
A detailed brochure on our Contract Hardware Sets is available on request.
Typical example of Contract Hardware set (for double fire rated panic exit door).
Contract Series DoorsetsFast TrackFollow the 14 steps below to select the door configuration required. Choose the required option and transfer the information into the quotation request form on the inside back cover of this catalogue
page 3
Please indicate your door reference numbers (if required). Each door reference is a unique doorset.
For non-identical doorsets, please use another door reference.
Please indicate the quantity of each identical doorset you require.
Choose one of the following options (if required): Choose one of the following options:
Please specify the standard polyester powder coat colour you require by indicating the appropriate colour reference letter. The standard top coat colour is 30% gloss (see page 5 for colour swatches)
450 x 270
2 x 450 x 450
Not available on fire rated doorsets.
450 x 270 450 x 450
C
2 x 450 x 270
450 x 450
450 x 1500
Threshold only Seals only
Threshold and Seals
Choose one of the following frame profiles:
Profile A2 Profile B3
Choose one of the following fixing types:
E F G
Single doorset
140m
m
100m
m
D
A
E
Double doorsetC
Choose one of the following door configurations for each doorset:
1. - Door Configuration 2. - Door Reference
Unequal double doorset
Inactive leaf width on unequal doorsets fixed at 400mm
5. - Frame Profile 6. - Fixing
Brick/Block Fixing
Steelwork Fixing
Studwork Fixing
9. - Louvres
A
10. - Threshold / Seals
Indicate ’O’ for clear threshold
14. - Quantity13. - Colour
RAL 9010 - White
RAL 9005 - Black
RAL 7035 - Light Grey
RAL 7042 - Mid Grey
RAL 7016 - Dark Grey
RAL 9006 - Silver
RAL 9007 - Dark Silver
RAL 5010 - Blue
BS 04E53 - Red
RAL 6005 - Green
B
Grey Primer only
Other colours are available on request but may incur additional cost.
A F
B G
C H
D J
E K
X
A
B
C
A B
C
LH
LH
LH
LH
RH
RH
RH
RH
RHACTIVE
RHACTIVE
LHACTIVE
LHACTIVE
Contract Series DoorsetsFast Track
page 4
Please indicate the actual structural opening width & height (dimensions in mm)
Choose one of the following functions for each doorset and indicate the required rating. Please see page 5 for further details.
• GD Range - General Purpose Doorsets
• FD Range - Fire Rated Doorsets - 1 or 2hrs
• AD Range - Acoustic Doorsets - 30dB
• TD1001 - Thermal Rated Doorsets* - U-Value >= 1.68W/m2K
Some size restrictions may apply.
* All external doorsets will be thermally insulated to comply with Part L of the Building Regulations.
Choose one of the following options (if required):
Single glazed options only.1 5
6
7
8
2
3
4 450 x 450 350 diameter 450 diameter250 x 1500250 x 700
A B C E
450 x 700
FD
1S Panic escape door with panic bolt for single doorsets
1D Panic escape door with panic bolt and panic latch combination for double doorsets
2S Panic escape door with panic bolt and external access device for single doorsets
2D Panic escape door with panic bolt and panic latch combination and external access for double doorsets
3 Panic escape door with rim panic latch*
4 Panic escape door with rim panic latch and external access device*
5 Store/Plant room door
6 General purpose door
7 Bathroom door**
8 N/A
9 Corridor door
10 Unlatched door
For each doorset, please indicate the hardware set you require. Please refer to our Contract Series Hardware brochure for more information.
H
W
In addition to the hardware sets you selected, the following accessories are also available:
Fire Escape Handings 1 - 4 only.
Out
war
d O
peni
ng
3. - Opening Size 4. - Door Function
7. - Handing (ISO) 8. - Vision Panels
Inw
ard
Ope
ning
11. - Hardware Sets 12. - Accessories
A Friction Stay
B Double Cylinder (for sashlock/deadlock only)
C1 Kickplate at 150mm height (1 No. for push side only)
C2 Kickplates at 150mm height (2 No. for push & pull side)
G1 Door Viewer at 1500mm FFL (angle of vision 17O˚)
G2 Second Door Viewer at 1000mm FFL
J1 Bottom Drip Rail only (for inward opening doorsets)
J2 Top & Bottom Drip Rail (for outward opening doorsets)
S Security Astragal for single doorset #
* Only available on single doorsets. Please indicate Set 1D or 2D for double doorsets
** Only available on single doorset
# Astragals supplied as standard on double doorsets.
For more details of our standard hardware sets, including line drawings of each product, please request a copy of our Contract Hardware Sets brochure.
Dimensions in mm
page 5
Contract Series DoorsetsFast Track
Steel Doorset Characteristics
• Strong durable and impact resistant. Tested to 1 million cycles
• Unaffected by moisture, will not warp, swell or rot
• Excellent surface finish, smooth and durable
• Prepared & reinforced to receive wide range of ironmongery
• Inherent hygienic properties
• Reduced maintenance and lower cost of ownership
• Enhanced fire, security, acoustic and thermal characteristics
• Environmentally friendly - 100% recyclable
Classifications
• BS 476 Part 22: 1987 (Fire integrity)• BS 5588-4: 1988 (Smoke passage)• Acoustically tested and certified with• BS EN ISO 140-3 : 1995 (BS 2750)
• BS EN ISO 717-1 : 1997 (BS 5821)
• BS EN ISO 9001: 2000 (Quality Management System)
• Severe Duty Strength & Durability Classification to BS EN 1192:2000 and BS EN 12400:2000.
• All hardware to relevant EN Standards
Options
• Single and double doorsets (equal and unequal leaves)
• Vision panels and louvre options• Full range of high contract quality hardware sets and accessories (see separate brochure)
Finishes
Range of RAL polyester powder coated top coat finishes (see below) or grey primer.
Note: due to printing limitations we recommend you check all colours against RAL or BS colour charts.
Contract Series Door FeaturesProduct Specification and Standard Options
Proprietary core materials
1.2mm thickzinc coated mild steel door skins
High quality contract ironmongery
Stainless steel ball bearing hinges
True verticallock seam joints
Hinge detail(open position)
Knock-down butt joint frame assembly
Frame infil to acoustic or thermally rated specification
1.6mm thick zinc coated mild steel
50 mmleaf thickness
Proprietary frame smoke, acoustic, draft seals
Threshold option
FD - Fire Door Range
AD - Acoustic Door Range
TD - Thermal Door Range
Note: Sound transmission through surrounding building elements needs consideration when specifying.RwdB: Weighted sound reduction index under laboratory conditions.
Door Ref:Fire Integrity Rating
(BS & EN)Sound Reduction
(Optional)Thermal Rating approx.
(Optional)
FD1001
FD1002
1 hour
2 hour
30RwdB
30RwdB
1.68 W/m2K-U value
1.68 W/m2K-U value
Door Ref:Max. Fire Rating
(Optional)Sound Reduction
(Optional)Thermal Rating
(approx.)
TD1001 Up to 2 hour 30RwdB1.68 W/m2K-U value
Door Ref:Max. Fire Rating
(Optional)Sound Reduction Thermal Rating approx.
(Optional)
AD1001 Up to 2 hour30RwdB 1.68 W/m2K-U value
Specification information available
CAD drawings - DFX, DWG or PDF versions
NBS Specification (Document L20-Doors/ Shutters/Hatches)
RRAL 9010AL 9010RAL 9010RRAL 9010R
RRAL AL RAL RRAL R 70357035
RRAL AL RAL RRAL R 70427042
RRAL AL RAL RRAL R 70167016
RRAL 90AL 90RAL 90RRAL 90R 0505
RRAL AL RAL RRAL R 50105010
RRAL AL RAL RRAL R 60056005
BS 04 E 53BS 04 E 53
RAL 9006RAL 9006
RAL 9007RAL 9007
Euro style lockcase with 72mm lock centres
Top and bottom rails spot-welded in position
A
B
C
D
E
F
G
H
J
K
Fast Track Quotation Request Form
Contact Name:
Your Company:
Tel Number:
Fax Number:
Email Address
Date:
Project Name:
Site Address:
Doo
r C
onfi
gura
tion
(A
, C, o
r E)
Photocopy and fax this order form to:
Contact Name:
Tel Number: 01795 477111
Fax Number: 01795 422463
You
r D
oor
Ref
eren
ce
1 2
Stru
ctur
al O
peni
ng S
ize
(mm
)
3
Width x Height GD
- (✓
)
4
FD -
Sta
te 1
hr o
r 2h
r
Door Functions
AD
- 3
0dB
(✓
)
TD -
(✓
)
Fram
e P
rofi
le (
A2
or B
3)
5
Fixi
ng (
A, B
or
C)
6
Han
ding
(1
- 8)
7
Vis
ion
Pan
els
(A -
F)
8
Louv
res
(A -
G)
9
Thre
shol
d/Se
als
(A, B
or
C)
10
Har
dwar
e Se
ts
11
Acc
esso
ries
12
Qua
ntit
y
14
Col
our
13
e.g.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
A D001 900 x 2100 1 - - A2 A 1 E - C 12S - E
Additional Comments or Requirements
page 6
-
Ingersoll Rand’s Security Technologies sector is a leading global provider of products and services that make environments safe, secure and productive. The sector’s market-leading products include electronic and biometric access control systems; time and attendance and personnel scheduling systems; mechanical locks and portable security; door closers and exit devices; steel doorsets and automated openings; architectural hardware and technologies and services for global security markets.
© 2007 Ingersoll Rand Company Limited
Millen Road Sittingbourne Kent ME10 2AA
Tel. 01795 476161 Fax. 01795 477111
Email [email protected] Web st.ingersollrand.co.uk
Ingersoll Rand Security Technologies
Whilst Ingersoll Rand Security Technologies has taken every care to ensure the accuracy of information, data or advice contained in this literature, no liability in respect of such information or advice, whether given negligently or not, can be accepted by the company. Ingersoll Rand retains the right to amend the technical specification of any range of equipment shown, without prior notice.