js5020ck - audioxtra

1

JS5020CK 5” Caravan Camera Kit

J A P A N Q U A L I T Y

2

CONTENTS Important Notes .................................................................................................................................................................................. 2 Keystroke Instructions ..................................................................................................................................................................... 3 Menu Operation Instruction ......................................................................................................................................................... 4 Wiring Diagram ................................................................................................................................................................................... 5 Bracket Installation ............................................................................................................................................................................ 6 Specifications ...................................................................................................................................................................................... 7 Warranty .................................................................................................................................................................................................. 8

IMPORTANT NOTES 1. Do not try to open the covers. 2. Please disconnect the power if anomolies occur. 3. Do not use organic solvents on the surfaces to avoid damage to the coating. 4. Do not apply force to the wiring leads to avoid internal damage.

5. Keep the product away from high dirt/dust enviroments, direct high temperature sun light and high humidity conditions. 6. Install the product so that it does not fall down. 7. Follow wiring diagram strictly or warranty will be voided and can result in damage to the vehicle’s electrical system.

8. Do not change functions while driving. 9. Comply with the operating temperature of this unit.

3

KEYSTROKE INSTRUCTION

Power

AV Input Select

- Volume & Menu DOWN Function

M MENU

+ Volume + Menu UP Function CH1 Camera Input 1

CH2 Camera Input 2

CH3 Camera Input 3

3

5�

3 way video inputs, 2 way trigger wires

With reverse polarity protection;Separately supply DC12V power to each camera;AV2/AV3 with trigger wires;

(5";7";9")Analog screen:320RGB(H)x234(V) (5.6")Digital screen:800RGB(H)x480(V)Digital screen:1024RGB(H)x600(V) (10.1")

Reversing image delay time 0~15s;Separately adjust camera mirror/ normal image;Multi-language

15# Remote control/Keystroke

Specifications

Audio; RCA/Aviation connector optional

Screen Size

Resolution

System

OSD MENU

Video Inputs

Brightness

Contrast

Voltage

Features

Operation Mode

Optional

PAL/NTSC/AUTO

450cd/㎡

450:1

DC10V~36V

Function Optional

1) Remove/Nonremove sun shade optional

2) With/without light sensor optional

3) Keystroke with/without blue LED light optional

4) Headrest Shroud/ U bracket/ Metal bracket optional

Butterfly Plastic Bracket U-Bracket Metal Bracket Headrest Shroud

4

V1/V2; AV; SEL

; Power

CH

L/R

M; MENU

-;

+;

; IR

Power On

Video Switch

Guide Lines

Image Normal/Mirror

MENU

Analog Decrease

Analog Increase

IR Receiver

Light Sensor

Earphone Jack(Decorate Only)

Inaction

Analog Increase

3 4

10

12

13

15

7 9

5 6

2

8

1

11 14

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

REMOTE CONTROL

MODE TIMER

GRID SEL

MENU

16:9 4:3

RESET

CH

CH

CH

Mute

Horizontal Mirror/Normal Image

Vertical Mirror/Normal Image

Volume Down

Volume Up

Menu

Analog Decrease

Remote Instruction

Keystroke Instruction1

2

3

4

5

6

7

8

9

10

11

1

2

3

4

5

6

7

8

9

10

11

Power On

Mode

Guide Lines

16:9/4:3

Timer (0~240mins)

AV Switchover

Reset

Analog Increase

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

3 4

10

12

13

15

7 9

5 6

2

8

1

11 14

REMOTE CONTROL

MODE TIMER

GRID SEL

MENU

16:9 4:3

RESET

CH

CH

Mute

Horizontal Mirror/Normal Image

Vertical Mirror/Normal Image

Volume Down

Volume Up

Menu

Analog DecreasePower On

Mode

Guide Lines

16:9/4:3

Timer (0~240mins)

AV Switchover

Reset

KEYSTROKE INSTRUCTION

Power

AV Input Select

- Volume & Menu Down Function

M Menu: Adjust Brightness, Contrast, Colour, Screen Orientation, Trigger,

Guidlines, Language, Reset.

+ Volume+ Menu UP Function

CH1 Camera Input 1

CH2 Camera Input 2

CH3 N/A

4

4

MENU OPERATION INSTRUCTION Press “MENU”, the screen will show “PICTURE” Press “- +” to select other feature. Press “- +” to adjust parameter. Press “MENU” over and over again, the screen will show pictures below.

Brightness 0~100 Contrast 0~100 Colour 0~100 Reset

Volume 0~100 Language OptionalRotate Normal/Flip/Mirror/Mirror Flip Zoom 4:3/16:9 VIV2 - 3s PlaybackBC2 - AV1 OptionalAuto Dim Optional

S - Color PAL/NTSC/AUTO Guidleines OptionalACC1 -Time Image Delay 0~15SACC2 - Time Image Delay 0~15SACC3 - Time Image Delay 0~15S

Sleep 0~240mins

5

WIRING DIAGRAM

GGNN

DD((BB

llaacckk

))PP

OOWW

EERR

((RReedd

))

TTRR

IIGG11

((YYeell

llooww

))TT

RRIIGG

22((BB

lluuee))

TTRR

IIGG33

((OOrraa

nngg

ee))

TTRR

IIGGGG

EERR

WWIIRR

EE

GGNN

DD((BB

llaacckk

))PP

OOWW

EERR

++((RR

eedd))

CCaamm

eerraa

BBrraa

cckkeett

BBrraa

cckkeett

CCaamm

eerraa

MMoo

nniittoo

rr

WIRING DIAGRAM

6

GR

OU

ND

AU

DIO

VID

EO

PO

WE

R

De

finit

ion

: Mo

nit

or c

on

ne

cto

r fro

nt v

iew

6

BRACKET INSTALLATION (Included) 1. U-Bracket Installation Fix the U-bracket into position. Insert and lock the monitor into the bracket using the mounting gymbal knobs.

2. Adjust the angle as required.

CAMERA INSTALLATION A. Hanging Installation: Please fix the camera on the top of boot back lid or the license plate. The offered screws are needed to fix the camera direction. B. Insert Installation: Please drill hole on the car. The hole size must be as same as the size of the camera.

For the sake of safety, please do not watch the video while driving, except driving assist video!

7

Bracket InstallationModel: 2;3;4;5;6;7;8;9;10 can choose the bracket:Headrest Frame; Plastic/Metal bracketModel: 1;11;12;13 can choose the bracket:Headrest Frame; Metal; U-Bracket

1. U-Bracket Installation1) Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.

2) Finished the installation. Adjust the angle forward 30°to backward 30°.User can adjust a suitable angle by oneself.

2. Plastic/Metal Bracket Installation1) Firstly fixed the bracket via the screws, the screws of the top need lock tonut of under.2) Secondly put the metal buckle piece on the top of the fan-shaped bracketinto the notch at the back of the monitor.3) Move the bracket to the properlocation.4) Screw down the nut of bracket,until the monitor fastening.


7






7






7





Mounting

Surface Installation

Mounting Mounting

7

SPECIFICATIONS

MONITOR TFT Panel: New Grade A LCDLCD Size: 5-Inch DiagonalDisplay Format: 16:9Resolution: 800 x 480Brightness: < 450 CD/M2Viewing Angles: 70° Left/Right/Up/DownVideo System: Auto PAL/NTSC SelectVideo Connect: 3 x 4-Pin (Female)Reverse Trigger: Yes, Each InputMonitor View: Normal/Mirror Image SelectButtons: IlluminatedGuidelines: Selectable On/Off (Camera 2 Only)Audio: On Board SpeakerMenu: OSD Operating Temp: -20°C to +70°CPower Input: 12-32V DC (Negative Ground)Brackets: U-Mount, Glass MountDimensions: 132W x 95H x 26D mm (excluding bracket)Finish: Matt Black Rubber

HEAVY DUTY CAMERA Image Sensor: 1/3” Sony CCDAuto Lens: f2.9mmElectronic Shutter: AutoVertical Viewing Angle: 120°Horizontal Viewing Angle: 90°Signal System: PALResolution: 700 TV LinesSync System: InternalOrientation: Mirror ImageNight Vision: Yes, 18 LEDIllumination: 0 Lux with IR onIngress Protection: IP69KOperating Temperature: -20°C ~ 70°CDimensions: 70W x 45H x 60D mm (Excl Bracket)Connection: Terminated 4-Pin MalePower Supply: 12V DC (From Monitor) DUAL MOUNT CAMERA - Image Device: 1/3” CMOS- Diagonal Viewing Angle: 165°- Horizontal Viewing Angle: 120°- Signal System: PAL- Effective Pixels: 640 x 480- Resolution: 480 TV Lines- Compatibility: All Monitors with RCA Input- Lens: Full Glass- Orientation: Mirror Image- Guidelines: Selectable On/Off- Night Vision: 0.2 Lux- Ingress Protection: IP67- Integrated Microphone: No- Operating Temp: -20 to 70°- Power Consumption: 90-300mA- Connection: Mini 4 Pin Terminated RCA (F), RCA (M) to 4 Pin Adaptor- Lead: 6M Mini 4 Pin to RCA (M)- Dimensions: 16.5W x 16.5H x 23D mm (Excluding Bracket)- Power Supply: 12V DC

TRAILER QUICK CONNECT Curly Cable Length: 0.5m (Original State) 4.0m (Elongated) Mounting Plate: 5-Pin (Male) Metal Plug with Weather CoverBrackets: 2 x Metal Plug Mounting BracketsCable (Monitor Side): 10m Terminated to 4-Pin (Male) (Trailer Plug to Monitor)Cable (Camera Side): 15m Terminated to 4-Pin (Female) (Camera to Trailer Plug)

INCLUDES U-Shape Mount Power Cable Assembly Sunshade Remote Control Glass Mount Bracket HEAVY DUTY CAMERA (White) 15m 4-Pin (Male) to 4-Pin (Female) Extension Cable Mounting Bracket Sunvisor

DUAL MOUNT CAMERA 15m 4-Pin (Male) to 4-Pin (Female) Extension Cable Installation Hardware Metal Hole Saw for Bumper Fit Installation 6m Video Cable (RCA M to RCA M)

TRAILER QUICK CONNECT Curly Cable (0.5m - Original State & 4.0m - Elongated) 2 x Metal Plug Mounting Brackets 10m Terminated to 4-pin male connector(to plug into monitor) 0.3m Terminated to 4-pin female connector(to plug into camera) RCA(M) to 4-pin(M) Adaptor cable

8

Congratulations on your purchase of a quality Mobile Safety System! You’re joining thousands of satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty. This warranty covers faults through component failure or failure of the product to operate in accordance with published specifications. Product failure as a result of unreasonable environmental conditions, accident, misuse, improper installation, unauthorised repair, vehicle electrical or wiring faults or neglect etc, will not be covered by this warranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of this product or any form of consequential loss.

CONSUMER WARRANTYThis product is warranted by AudioXtra Pty Ltd to be free from defects in materials and workmanship under NORMAL USE for a period of TWENTY FOUR MONTHS from the date of purchase.

WITHIN 30 DAYS OF PURCHASE DATE: Please return the unit for replacement to our National Service Centre or the Retailer from where you made the purchase. All accessories must be included. Proof of purchase date must accompany the products.

AFTER 30 DAYS OF PURCHASE DATE: Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorised centre concerned with this repair. This proof should take the form of either:a) The warranty card accompanying this product, stamped and dated by the dealer.b) A Tax Invoice or Receipt showing full details of original vendor, purchaser, model number and serial number.

COMMERCIAL WARRANTY A product used in or associated with a commercial application will carry a limited SIX MONTH warranty. An abnormal commercial application is one where usage, dust, vibration, heat/cold and other environmental conditions exist at anextreme level.Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please complete details below in the event of warranty service being required.

Purchaser’s Name:

Purchaser’s Address:

Model Number:

Dealer Name:

Dealer Address:

Invoice/Sales Docket no:

Serial Number:

Date of Purchase: / /

General Hints: To expedite service and prompt return of the equipment, please:

a) Clearly describe the fault in detail b) Safely and securely pack the unit for transport c) Include your return address d) Provide proof of purchase date as outlined above

National Service Centre: 10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 Australia Telephone: (02) 8841 9000 Fax: (02) 9636 1204 email: [email protected]

PTY LTD

audioxtra.com.au

WARRANTY

JS5020CK

js5020ck - audioxtra

Documents