Journal of

Microprocessor Engineering and Applications

(JoMEA) Jan - April 2014

STM JOURNALSScientific Technical Medical

www.stmjournals.com

STM Publication, a strong initiative by Consortium E-Learning Network Private ltd.(Estd. 2006) was

launched in the year 2010 under the support and guidance by our esteemed Editorial and Advisory board

members from renowned institutes.

Objectives of STM Publication(s):

?Scientific, Technical and Medical research promotions.

?Publication of genuine Research/Review, Short Articles and Case Studies through proper review

process.

?Publishing Special Issues on Conferences.

?Preparing online platform for other print Journals.

?Empowering the libraries with online and print Journals in Scientific, Technical and Medical

domains.

?Publishing and distribution of books on various subjects which mainly falls in the category of

Nanotechnology, Scientific and technical writing & Environment, Health and Safety.

Salient Features:

?A bouquet of 100+ Journals that fall under Science, Technical & Medical domains.

?Employs Open Journals System (OJS) A Journal Management & Publishing System.

?The first and one of the fastest growing publication website in India as well as in abroad for its quality

and coverage.

?Rapid online submission and publication of papers, soon after their formal acceptance/ finalization.

?Facilitates linking with the other authors or professionals.

?Worldwide circulation and visibility.

Focus and Scope Covers

is published (frequency: three times a year) in India by STM

Journals (division of Consortium e-Learning Network Private Ltd. Pvt.) The views expressed in the articles do not

necessarily reflect of the Publisher. The publisher does not endorse the quality or value of the advertised/sponsored

products described therein. Please consult full prescribing information before issuing a prescription for any products

mentioned in this publication.

No part of this publication may be reproduced, stored in retrieval system or transmitted in any from without written

permission of the publisher.

To cite any of the material contained in this Journal, in English or translation, please use the full English reference at the

beginning of each article. To reuse any of the material, please contact STM Journals (info@stmjournals.com)

Journal of Microprocessor Engineering and Applications

Journal of Microprocessor Engineering and Applications

?Digital Circuits

?Semiconductors

?Microcontrollers

?Digital Signal Processor,

?Programmable State Machines

? Graphics Processing Units

?Instruction Set Architecture

STM Publication(s)

STM Journals (division of Consortium e-Learning Network Private Ltd. ) having its Marketing office located at Office

No. 4, First Floor, CSC pocket E Market, Mayur Vihar Phase II, New Delhi-110091, India is the Publisher of Journal.

Statements and opinions expressed in the Journal reflect the views of the author(s) and are not the opinion of STM

Journals unless so stated.

Subscription Information and Order:

Cost of Journal:

? National Subscription: Rs. 3750/- per Journal (includes 3 print issues), Single Issue copy purchase Rs.1500/copy

? International Subscription:

? Online Only- $99, Print Only-$149 (includes 3 print issues)

? Online + Print-$199 (includes 3 print issues + online access of published back volumes )

To purchase print compilation of back issues please send your query at info@stmjournals.com

Subscription must be prepaid. Rates outside the India includes speed delivery charges. Prices subject to change

without notice.

Mode of Payment: At par cheque, Demand draft, and RTGS (payment to be made in favor of

Consortium E-Learning Network. Pvt. ltd., payable at Delhi/New Delhi.

Online Access Policy

A). For Authors:

In order to provide maximum citation and wide publicity to the authors work, STM Journals also have Open Access

Policy, authors who would like to get their work open access can opt for Optional Open Access publication at

nominal cost as follows

India, SARC and African Countries: INR 2500 or 100 USD including single hard copy of Author's Journal.

Other Countries: USD 200 including single hard copy of Author's Journal.

B.) For Subscribers:

? Online access will be activated within 72 hours of receipt of the payment (working days), subject to receipt of

correct information on user details/Static IP address of the subscriber.

? The access will be blocked:

? If the user requests for the same and furnishes valid reasons for blocking.

? Due to technical issue.

? Misuse of the access rights as per the access policy.

Advertising and Commercial Reprint Inquiries: STM Journals with wide circulation and visibility offer an excellent

media for showcasing/promotion of your products/services and the events-namely, Conferences, Symposia/Seminars

etc. These journals have very high potential to deliver the message across the targeted audience regularly with each

published issue. The advertisements on bulk subscriptions, gift subscriptions or reprint purchases for distribution etc. are

also very welcome.

Lost Issue Claims: Please note the following when applying for lost or missing issues:

? Claims for print copies lost will be honored only after 45 days of the dispatch date and before publication of the

next issue as per the frequency.

? Tracking id for the speed post will be provided to all our subscribers and the claims for the missing Journals will

be entertained only with the proofs which will be verified at both the ends.

? Claims filed due to insufficient (or no notice) of change of address will not be honored.

? Change of Address of Dispatch should be intimated to STM Journals at least 2 months prior to the dispatch

schedule as per the frequency by mentioning subscriber id and the subscription id.

? Refund requests will not be entertained.

Legal Disputes

All the legal disputes are subjected to Delhi Jurisdiction only.

If you have any questions, please contact the Publication Management Team:

info@stmjournals.com; Tel : +91 0120-4781211.

Chairman

Mr. Puneet Mehrotra

Managing Director STM Journals, Consortium eLearning Network Pvt. Ltd.(CELNET)

Noida ,India

Group Managing Editor Dr. Archana Mehrotra

DirectorCELNET, Delhi, India

Puneet Pandeya

ManagerMonika Malhotra

Assistant Manager

Assistant Editors

Aditya Sanyal

Himani Garg

Himani Pandey

Publication Management Team

Internal Members

External Members

Dr. Bimlesh Lochab

Industrial Tribology Machine Dynamics & Maintenance

Engineering Centre (ITMMEC)

Indian Institute of Technology Delhi, India.

Prof. S. Ramaprabhu

Alternative Energy Technology Laboratory,

Department of Physics,

Indian Institute of Technology, Chennai, India.

Dr. Rajiv Prakash

School of Materials Science and Technology,

Institute of Technology, Banaras Hindu University,

Varanasi, India.

Dr. Rakesh Kumar

Assistant Professor, Department of

Applied Chemistry, BIT Mesra,

Patna, India.

Associate Editors

Gargi Asha Jha

Nupur Anand

Priyanka Aswal

Sona Chahal

STM Journal (s) Advisory Board

Dr. Ashish RunthalaLecturer, Biological Sciences Group,

Birla Institute of Technology & Science, Pilani Rajasthan, India.

Dr. Baldev RajDistinguished Scientist & Director,

Indira Gandhi Centre for Atomic Research

(ICGAR)Kalpakkam, India.

Dr. Baskar KaliyamoorthyAssociate Professor, Department

of Civil Engineering National Institute of Technology Trichy, India.

Prof. Bankim Chandra RayProfessor and Head, Department of

Metallurgical and Materials Engineering National Institute of Technology,

Rourkela, India.

Prof.D. N. Rao Professor, Department of Biochemistry,

AIIMS, New Delhi, India.

Prof. Jugal KishoreProfessor, Department of Community

Medicine, Maulana Azad Medical College, New Delhi, India.

Dr. Pankaj PoddarScientist, Physical & Materials ChemistryDivision, National Chemical Laboratory,

Pune, India.

Dr. Hardev Singh VirkProfessor Emeritus, Eternal

University, Baru Sahib, India.

Dr. Nandini Chatterjee SinghAssociate Professor,

National Brain Research Centre, Manesar, India.

Dr. Shankargouda PatilAsst. Prof., Department of Oral

Pathology, KLE Society's Institute of Dental Sciences, Bangalore, India.

Prof. Subash Chandra MishraProfessor, Metallurgical & Materials

Engineering Department, NIT, Rourkela, India.

Prof. Yuwaraj Marotrao GhugalProfessor and Head Department, Govt.College of Engineering Station Road,

Osmanpura, Aurangabad, India.

Prof. Sundara RamaprabhuProfessor, Department of Physics

Indian Institute of Technology Madras, India.

Dr. Shrikant Balkisan DhootHead Research & Development,

Nurture Earth R&D Pvt LtdMIT Campus, Beed bypass road,

Aurangabad, India.

Dr. Rakesh KumarAssistant Professor,

Department of Applied Chemistry, BIT Mesra, Patna, India.

Dr. Priyavrat TharejaHead, Materials and Metallurgical

Engineering department, PEC University of Technology,

Chandigarh, India.

STM Journal (s) Advisory Board

Editorial Board

Angsuman SarkarAssistant Professor, Department of

Electronics & Communication Engineering, Kalyani Government

EngineeringCollege, Nadia, West Bengal, India.

Brajesh Kumar KaushikAssistant Professor, Department of

Electronics and Communication Engineering, Indian Institute of

Technology-Roorkee, India.

Kishor Sarawadekar Department of Electronics Engineering,

Defense Institute of Advanced Technology, Giri Nagar, Pune,

India.

Maheswari MuraliDepartment of Electronics and

Communication Engineering J.J College of Engineering and Technology Trichy,

India.

Gagan KhanduriResearch Associate, Centre for Applied Research in Electronics Indian Institute

of Technology, Delhi, India.

Anil Kumar GuptaDepartment of Electronics and

Communication Engineering, National Institute of Technology, Kurukshetra,

India.

Rupendra Kumar SharmaMicroelectronics Department, Faculty

of Electrical Engineering, Czech Technical University in Prague,

Czech Republic.

Servin RathiSchool of Electronics and Electrical

Engineering, Sungkyunkwan University, Republic Of Korea.

Thottappan MuthiahAssistant Professor, Department of

Electronics Engineering, Indian Institute of Technology, Banaras

Hindu University, India.

I take the privilege to present the print version for the Volume 1 Issue (1) of Journal of

Microprocessor Engineering and Applications. The intension of JoMEA is to create an atmosphere

that stimulates creativeness, research and growth in the area of Microprocessor Engineering and

Applications.

The development and growth of the mankind is the consequence of brilliant Research done by

eminent Scientists and Engineers in every field. JoMEA provides an outlet for Research findings and

reviews in areas of Microprocessor engineering and applications found to be relevant for National

and International recent developments & research initiative.

The aim and scope of the Journal is to provide an academic medium and an important reference for

the advancement and dissemination of Research results that support high level learning, teaching and

research in the domain of Microprocessor Engineering and Applications.

Finally,I would like to thank Authors for their continued support and invaluable contributions and

suggestions in the form of authoring. I express my sincere gratitude and thanks to our Editorial/

Reviewer board write ups/ reviewing and providing constructive comments for the advancement of

the journals. With regards to their due continuous support and co-operation, we have been able to

publish quality Research/Reviews findings for our customers base.

I hope you will enjoy reading this issue and we welcome your feedback on any aspect of the Journal.

Dr. Archana Mehrotra

Director

STM Journals

Director's Desk

STM JOURNALS

1. Mobile Operated Car Cooling System Vishal S. Vora, Savan D. Vyas, Mansi D. Shah 1

ContentsJournal of Microprocessor Engineering and Applications

JoMEA (2014) © STM Journals 2014. All Rights Reserved

Journal of Microprocessor Engineering and Applications

Volume 1, Issue 1

www.stmjournals.com

Mobile Operated Car Cooling System

Vishal S. Vora1*, Savan D. Vyas

2, Mansi D. Shah

2

1Electronics and Communication Department, A.I.T.S., Rajkot, Gujarat, India

2Gujarat Technological University, Gujarat, India

Abstract The field of invention is based on embedded system. This invention is used to correlate the

need and comfort zone of the individuals. It makes the use of basic microcontroller as the intellectual part of the whole circuitry. The invention constitutes the use of tools like

relays, microcontroller (8081), GSM module. Each component has its own significance.

The application of invention is that whenever you need to travel in car, before you get

down into your car one can easily start the cooling system of car (i.e. air conditioner) by

just sending SMS from your cell phone. The sim card used in GSM module can be any but the specified num for giving acknowledgement must be one only and can be stored in

program. Also, necessary programming is developed and loaded in microcontroller

which sends signal to actuate the car cooling system. Invention takes into consideration system entities required, costing and needs of costumer in growing market.

Keywords: Car cooling system, air conditioner operated via SMS, GSM module

interface for car cooling