JNTU Hyderabad : B.Tech. III Year I & II Semester Regular/Supplementary Examinations Time Table 2011-2012

Download JNTU Hyderabad : B.Tech. III Year I & II Semester Regular/Supplementary Examinations Time Table 2011-2012

Post on 28-Jul-2015

1.396 views

Category:

Documents

4 download

TRANSCRIPT

III YEAR B.TECH. I SEMESTER (R09)

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABADKUKATPALLY - HYDERABAD 500 085EXAMINATION BRANCHIII YEAR B.TECH - I SEMESTER R09 REGULATION (R09) REGULAR EXAMINATIONS, DEC., 2011 T I M E T A B L E

T I M E - 10-00 AM TO 01.00 PMBRANCH 13-12-11 TUESDAY 15-12-11 THURSDAY DATE, TIME & DAY 17-12-11 20-12-11 SATURDAY TUESDAY WASTE MANAGEMETN ENVIRONMENTAL IMPACT ASSESSMENT AND MANAGEMENT ADVANCED STRUCTURAL ANALYSIS CONTROL SYSTEMS COM. TO ECE,EEE, ETE DYNAMICS OF MACHINERY COM. TO ME, MECT, AME CONTROL SYSTEMS COM. TO ECE,EEE, ETE 22-12-11 THURSDAY 24-12-11 SATURDAY

CIVIL ENGINEERING (01-C E)

CONCRETE TECHNOLOGY

DESIGN OF REINFORCED CONCRETE STRUCTURES

WATER RESOURCES ENGINEERING-I

GEOTECHNICAL ENGINEERING-I

ENGINEERING GEOLOGY

ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E) MECHANICAL ENGINEERING (03-M E) ELECTRONICS AND COMMUNICATIONS ENGINEERING (04-E C E)

IC APPLICATIONS COM. TO ETM, ECE, EEE MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME IC APPLICATIONS COM. TO ETM, ECE, EEE

MANAGEMENT SCIENCE COM. TO EEE, AE METROLOGY & SURFACE ENGINEERING ELECTRONIC MEASUREMENTS & INSTRUMENTATION

POWER ELECTRONICS

ELECTRICAL MACHINES-III

POWER SYSTEMS-II

MACHINE TOOLS

DESIGN OF MACHINE MEMBERS-I

APPLIED THERMODYNAMICS-II COM. TO ME, AME

COMPUTER ORGANIZATION OPERATION RESEARCH

ANTENNAS AND WAVE PROPAGATION COM. TO ECE, ETM

ANALOG COMMUNICATIONS

COMPUTER SCIENCE AND ENGINEERING (05-C S E)

PRINCIPLES OF PROGRAMMING LANGUAGES

SOFTWARE ENGINEERING COM. TO CSE, ECOMP, IT

MICRO PROCESSORS & INTERFACING

INTELLECTUAL PROPERTY RIGTHS & CYBER LAWS COMPUTER FORENSICS

OPERATING SYSTEMS COM. TO CSE, IT

DATA COMMUNICATION AND COMPUTER NETWORKS

BIO PROCESS ENGINEERING CHEMICAL ENGINEERING (08-C H E M) CHEMICAL ENGINEERING THERMODYNAMICS-II CHEMICAL REACTION ENGINEERING-1 MASS TRANSFER OPERATIONS-I PROCESS HEAT TRANSFER NANO TECHNOLOGY INTELLECTUAL PROPERTY RIGHTS ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME ANALOG AND DIGITAL IC APPLICATIONS COM. TO EIE, BME, ICE PULSE AND DIGITAL CIRCUITS COM. TO EIE,ICE SIGNAL CONDITIONING CIRCUITS PRINCIPLES OF ELECTRONIC INSTRUMENTATION ENERGY ENGINEERING

---

CONTINUED ON PAGE 2

III YEAR B.TECH. I SEMESTER (R09)PAGE 2 DATE, TIME & DAY 17-12-11 20-12-11 SATURDAY TUESDAY

BRANCH

13-12-11 TUESDAY MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME IC APPLICATIONS COM. TO ETM, ECE, EEE

15-12-11 THURSDAY ANALOG AND DIGITAL IC APPLICATIONS COM. TO EIE, BME, ICE SOFTWARE EMGINEERING COM. TO CSE, ECOMP, IT

22-12-11 THURSDAY

24-12-11 SATURDAY

BIO-MEDICAL ENGINEERING (11-B M E)

PRINCIPLES OF COMMUNICATIONS

BASIC CLINICAL SCIENCES-II

BIOFLUIDS AND MECHANICS

DIGITAL SIGNAL PROCESSING COM. TO ECOMPE, ICE, BME, ETM

INFORMATION TECHNOLOGY (12- I T) MECHANICAL ENGINEERING (MECHATRONICS) (14-MCT) ELECTRONICS AND TELEMATICS ENGINEERING (17-E T M) METALLURGY AND MATERIAL TECHNLOGY (18-M M T) ELECTRONICS AND COMPUTER ENGINEERING (19-E C C) AERONAUTICAL ENGINEERING (21-A E) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E)

COMPUTER NETWORKS

LINUX PROGRAMMING

OPERATING SYSTEMS COM. TO CSE, IT

AUTOMATA & COMPILER DESIGN

FINITE ELEMENT TECHNIQUES

DYNAMICS OF MACHINERY COM. TO ME, MECT, AME CONTROL SYSTEMS COM. TO ECE,EEE, ETE MECHANICAL METALLURGY

SWITCHING THEORY AND LOGIC DESIGNCOMPUTER ORGANIZATION

MACHINE TOOLS

PRINCIPLES OF MACHINE DESIGN

ANALOG & DIGITAL COMMUNICATIONS

ANTENNAS AND WAVE PROPAGATION COM. TO ECE, ETM NON FERROUS EXTRACTIVE METALLURGY DESIGN & ANALYSIS OF ALGORITHMS AIR TRANSPORTATION SYSTEMS

DIGITAL SIGNAL PROCESSING COM. TO ECOMPE, ICE, BME, ETM

BASIC ELECTRONICS MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME

WELDING TECHNOLOGY SOFTWARE ENGINEERING COM. TO CSE, ECOMP, IT

HEAT TREATMENT TECHNOLOGY

IRON PRODUCTION

COMPILER DESIGN

DATA BASE MANAGEMENT SYSTEMS AEROSPACE VEHICLES STRUCTURES -II INSTRUMENTATION PRACTICES IN INDUSTRIES BASIC INDUSTRIAL AND ENVIRONMENTAL BIOTECHNOLOGY DESIGN OF MACHINE ELEMENTS

DIGITAL SIGNAL PROCESSING COM. TO ECOMPE, ICE, BME, ETM

FLIGHT MECHANICS-IIMANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME

MANAGEMENT SCIENCE COM. TO EEE, AEANALOG AND DIGITAL IC APPLICATIONS COM. TO EIE, BME, ICE TRANSPORT PHENOMENA IN BIOPROCESSES MACHANICS OF FLUIDS AND HYDRAULIC MACHINES

AEROSPACE PROPULSION-I PULSE AND DIGITAL CIRCUITS COM. TO EIE,ICE BIOCHEMICAL REACTION ENGINEERING DYNAMICS OF MACHINERY COM. TO ME, MECT, AME

AERODYNAMICS-II

---

DIGITAL SIGNAL PROCESSING COM. TO ECOMPE, ICE, BME, ETM

BIOTECHNOLOGY (23-B O T)

GENETIC ENGINEERING

FUNDAMENTALS OF ENZYME MECHANISMS & TECHNOLOGY APPLIED THERMODYNAMICSII COM. TO ME, AME

AUTOMOBILE ENGG. (24 AME)

VEHICLE DYNAMICS

III YEAR B.TECH. I SEMESTER (R09)

PAGE : 4

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R09 REGULATIONSDATE OF EXAMINATION: 17-12-11(SATURDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS Control Systems Control Systems Principles of Programming Language COMPUTER SCIENCE AND ENGINEERING (05-C S E) ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) INFORMATION TECHNOLOGY (12- I T) ELECTRONICS AND TELEMATICS ENGINEERING (17-E T M) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E) Principles of Programming Language Software Engineering Managerial economics & Financial Analysis Managerial economics & Financial Analysis Control Systems Pulse & Digital Circuits SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS Electronic Circuits (EEE R09 II/II) Software Engineering (CSE R09 III/I) Net work Programming (CSE R07 IV/I) Formal Languages & Automata Theory (CSE R09 II/II) Principles of Communication (EIE R09 II/II) E-Commerce(IT R07 III/II) Software Engineering (CSE R09 III/I) Transduction of physical Variables (ICE R09 II/I)

BRANCH ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E) ELECTRONICS AND COMMUNICATIONS ENGINEERING (04-E C E)

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R09 REGULATIONSDATE OF EXAMINATION: 20-12-11(TUESDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS Pulse & Digital Circuits SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS Control Systems (EIE R09 II/II) Transduction of Physical Variance (EIE R09 II/ I) Distributed Database (IT R07 III/I) Unix and Shell Programming (CSE R07 II/I) Control Systems (EIE R09 II/II)

BRANCH ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) INFORMATION TECHNOLOGY (12- I T) COMPUTER SCIENCE AND ENGINEERING (05-C S E) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E)

Operating Systems Microprocessor & Interfacing Pulse & Digital Circuits

III YEAR B.TECH. I SEMESTER (R09)TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R09 REGULATIONSDATE OF EXAMINATION: 22-12-11(THURSDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS IC Applications Analog Communications Signal Conditioning Circuits SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS Network Theory (EEE R09 II/II)II/II) Principles of Programming Languages (CSE R09 III/I) Transducers & Applications (EIE R09 II/II) Microprocessor & Interfacing (IT R07 III/I) Design and Analysis of Algorithms (CSE R09 II/II) Data Communication Systems (IT R07 III/ I) Principles of Programming Languages (CSE R09 III/I) Environmental Studies (ICE R09 II/II)

BRANCH ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E) ELECTRONICS AND COMMUNICATIONS ENGINEERING (04-E C E) ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) INFORMATION TECHNOLOGY (12- I T) ELECTRONICS AND TELEMATICS ENGINEERING (17-E T M) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E)

Software Engineering

Analog Communications Linear & Digital IC Applications

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R09 REGULATIONSDATE OF EXAMINATION: 24-12-11(SATURDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS Linear & Digital IC Applications Software Engineering Managerial Economics & Financial Analysis SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS Electrical Circuits Analysis (EIE R09 II/II) Design and Analysis of Algorithms (CSE R09 II/II) Design and Analysis of Algorithms (CSE R09 II/II)

BRANCH ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) COMPUTER SCIENCE AND ENGINEERING (05-C S E) INFORMATION TECHNOLOGY (12- I T) NOTE: i. ii. iii.

ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

DATE: 02-11-11

Sd/-xxxxx CONTROLLER OF EXAMINATIONS

III YEAR B.TECH. I SEMESTER (R07) JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD KUKATPALLY - HYDERABAD 500 085EXAMINATION BRANCHIII YEAR B.TECH - I SEMESTER R07 REGULATION (R07) SUPPLEMENTARY EXAMINATIONS, DEC., 2011 T I M E T A B L E

T I M E - 10-00 AM TO 01.00 PMBRANCH 13-12-11 TUESDAY MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME COMPUTER SYSTEM ORGANIZATION MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS COM. TO CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME 15-12-11 THURSDAY DESIGN OF REINFORCED CONCRETE STRUCTURES ELECTRICAL MEASUREMENTS DATE & DAY 17-12-11 20-12-11 SATURDAY TUESDAY 22-12-11 THURSDAY 24-12-11 SATURDAY

CIVIL ENGINEERING (01-C E) ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E) MECHANICAL ENGINEERING (03-M E) ELECTRONICS AND COMMUNICATIONS ENGINEERING (04-E C E) COMPUTER SCIENCE AND ENGINEERING (05-C S E) CHEMICAL ENGINEERING (08-C H E M) ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) BIO-MEDICAL ENGINEERING (11-B M E)

CONCRETE TECHNOLOGY

WATER RESOURCES ENGINEERING-I POWER ELECTRONICS COM TO EEE, E.CONT.E MACHINE TOOLS COM. TO ME, MECT COMPUTER ORGANIZATION COM TO ECE, EIE, ETM MICRO PROCESSORS AND INTERFACING COM TO CSE, IT, E.COMP.E ,ICE CHEMICAL REACTION ENGINEERING-1 COMPUTER ORGANIZATION COM TO ECE, EIE, ETM

STRUCTURAL ANALYSIS-II

ENGINEERING GEOLOGY

POWER SYSTEMS-II

ELECTRICAL MACHINES-III

LINEAR SYSTEMS ANALYSIS

AUTOMOBILE ENGINEERING

DYNAMICS OF MACHINERY COM TO ME, MEP, AME

DESIGN OF MACHINE MEMBERS-I COM TO ME, MEP

HEAT TRANSFER COM TO ME, MEP, AME

DIGITAL IC APPLICATIONS

LINEAR IC APPLICATIONS

ANTENNAS AND WAVE PROPAGATION COM. TO ECE, ETM

DIGITAL COMMUNICATIONS COM. TO ECE, ETM

FORMAL LANGUAGES AND AUTOMATA THEORY

SOFTWARE TESTING METHODOLOGIES COM TO CSE, IT MATERIAL SCIENCE FOR CHEMICAL ENGINEERS ELECTRONIC CIRCUIT ANALYSIS LINEAR AND DIGITAL IC APPLICATIONS COM. TO BME, E.CONT..E, ETM, E.COMP.E

COMPUTER GRAPHICS COM TO CSE, IT, CSSE, E.COMP.E CHEMICAL ENGINEERING THERMODYNAMICSII CONTROL SYSTEMS COM TO EIE, AE

DATA COMMUNICATION SYSTEMS COM TO CSE, IT

DESIGN AND ANALYSIS OF ALGORITHMS

DATA BASE MANAGEMENT SYSTEMS COM TO CHEM, MECT MANAGEMENT SCIENCE COM TO EIE, AE

MASS TRANSFER OPERATIONS-I

PROCESS INSTRUMENTATION

INDUSTRIAL INSTRUMENTATION

PROCESS CONTROL INSTRUMENTATION COM TO EIE, ICE

HOSPITAL SYSTEM MANAGEMENT

BIOMEDICAL EQUIPMENT

BASIC CLINICAL SCIENCES-II

BIOFLUIDS AND MECHANICS

DIGITAL SIGNAL PROCESSING COM. TO BME, E.COMP.E

CONTINUED ON PAGE 2

III YEAR B.TECH. I SEMESTER (R07)PAGE 2 DATE , TIME & DAY 17-12-11 20-12-11 SATURDAY TUESDAY

BRANCH

13-12-11 TUESDAY

15-12-11 THURSDAY

22-12-11 THURSDAY DATA COMMUNICATION SYSTEMS COM TO CSE, IT PRINCIPLES OF COMMUNICATIONS SWITCHING THEORY AND LOGIC DESIGN OPERATING SYSTEMS Com to CSSE, E.Comp.E ANTENNAS AND WAVE PROPAGATION Com. to ECE, ETM

24-12-11 SATURDAY

INFORMATION TECHNOLOGY (12- I T) ELECTRONICS & CONTROL ENGINEERING (13-E Con. E) MECHANICAL ENGINEERING (MECHATRONICS) (14-MCT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15-C S S) ELECTRONICS AND TELEMATICS ENGINEERING (17-E T M) METALLURGY AND MATERIAL TECHNLOGY (18-M M T) ELECTRONICS AND COMPUTER ENGINEERING (19-E C C) MECHANICAL ENGINEERING (PRODUCTION) (20-M E P) AERONAUTICAL ENGINEERING (21-A E) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E)

AUTOMATA & COMPILER DESIGN COM. TO IT, CSSE

SOFTWARE TESTING METHODOLOGIES COM TO CSE, IT LINEAR AND DIGITAL IC APPLICATIONS Com. to BME, E.CONT..E, ETM, E.COMP.E INDUSTRIAL MANAGEMENT

COMPUTER GRAPHICS COM TO CSE, IT, CSSE, E.COMP.E PRIME MOVERS AND MECHANICAL COMPONENTS FINITE ELEMENT METHODS COMPUTER GRAPHICS Com to CSE, IT, CSSE, E.Comp.E

COMPUTER ORGANIZATION

MICRO PROCESSORS AND INTERFACING COM TO CSE, IT, E.COMP.E ,ICE POWER ELECTRONICS Com to EEE, E.CONT.E MACHINE TOOLS Com. to ME, MECT

DISTRIBUTED DATABASES

PROCESS CONTROL

DATA BASE MANAGEMENT SYSTEMS Com to CHEM, MECT AUTOMATA & COMPILER DESIGN COM. TO IT, CSSE MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS Com. to CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS Com. to CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS Com. to CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS Com. to CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME MANAGEMENT SCIENCE Com to EIE, AE MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS Com. to CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME

KINEMATICS OF MACHINERY

OPTIMIZATION TECHNIQUES LINEAR AND DIGITAL IC APPLICATIONS COM. TO BME, E.CONT..E, ETM, E.COMP.E WELDING TECHNOLOGY COM TO MMT, MEP LINEAR AND DIGITAL IC APPLICATIONS COM. TO BME, E.CONT..E,ETM, E.COMP.E WELDING TECHNOLOGY COM TO MMT, MEP

SYSTEMS PROGRAMMING

UNIX PROGRAMMING

BASIC OF TELEMATICS

COMPUTER ORGANIZATION Com to ECE, EIE, ETM HEAT TREATMENT TECHNOLOGY MICRO PROCESSORS AND INTERFACING Com to CSE, IT, E.COMP.E ,ICE POWER PLANT AND TURBO MACHINERY AEROSPACE VEHICLES STRUCTURES -I MICRO PROCESSORS AND INTERFACING Com to CSE, IT, E.COMP.E ,ICE

DIGITAL COMMUNICATIONS Com. to ECE, ETM

MECHANICAL METALLURGY

PROBABILITY & STATISTICS

IRON PRODUCTION

COMPUTER GRAPHICS Com to CSE, IT, CSSE, E.Comp.E DYNAMICS OF MACHINERY Com to ME, MEP, AME CONTROL SYSTEMS COM TO EIE, AE INDUSTRIAL ELECTRONICS

OPERATING SYSTEMS Com to CSSE, E.Comp.E DESIGN OF MACHINE MEMBERS-I Com to ME, MEP AEROSPACE PROPULSION-I

DIGITAL SIGNAL PROCESSING COM. TO BME, E.COMP.E

HEAT TRANSFER Com to ME, MEP, AME

FLIGHT MECHANICS-I

AERODYNAMICS-II

ENVIRONMENTAL STUDIES

OBJECT ORIENTED PROGRAMMING

PROCESS CONTROL INSTRUMENTATION Com to EIE, ICE CONTINUED ON PAGE 3

III YEAR B.TECH. I SEMESTER (R07)PAGE 3 DATE , TIME & DAY 17-12-11 20-12-11 SATURDAY TUESDAY

BRANCH

13-12-11 TUESDAY MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS Com. to CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS Com. to CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME

15-12-11 THURSDAY

22-12-11 THURSDAY

24-12-11 SATURDAY

BIOTECHNOLOGY (23-B O T)

TRANSPORT PHENOMENA IN BIOPROCESSES

BIOCHEMICAL REACTION ENGINEERING-I

BASIC INDUSTRIAL AND ENVIRONMENTAL BIOTECHNOLOGY DESIGN OF MACHINE ELEMENTS

GENETIC ENGINEERING

PLANT BIOTECHNOLOGY

AUTOMOBILE ENGG. (24 AME)

FLUID MACHINES AND HYDRAULIC MACHINERY

DYNAMICS OF MACHINERY Com to ME, MEP, AME

THERMAL ENGINEERING - II

HEAT TRANSFER Com to ME, MEP, AME

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R07 REGULATIONSDATE OF EXAMINATION: 17-12-11 (TUESDAY) TIME OF EXAMIANTION:02.00 PM TO 05.00 PM THE SUBJECT(S) OF R07 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF R05 REGULATIONS Managerial Economics & Financial Analysis SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF R05 REGULATIONS Electrical & Electronics Engineering 07A3EC01 II YR. I SEM. R07 Environmental Studies 07A3EC11 II YR I SEM R07 Objective Oriented Programme 07A4EC08 II YR II SEM R07 Principles of Programming Languages 07A40501 II YR II SEM R07 Managerial Economics & Financial Analysis 07A3HS01 II YR I SEM R07 Mechanical Unit Operations 07A40803 II YR II SEM R07 Digital IC Applications 07A40401 II YR II SEM R07 Principles of Programming Languages 07A40501 II YR II SEM R07 Managerial Economics & Financial Analysis 07A3HS01 II YR I SEM R07 Basic Electronics 07A40405 II YR II SEM R07 Computer Organization 07A4EC13 II YR II SEM R07 CONTINUED ON PAGE 4

BRANCH

CIVIL ENGINEERING (01 CE) ELECTRONICS & COMMUNICATION ENGINEERING (04 ECE)

Managerial Economics & Financial Analysis

COMPUTER SCIENCE ENGINEERING (05 CSE)

Design Analysis of Algorithms

CHEMICAL ENGINEERING (08-CHEM) ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) INFORMATION TECHNOLOGY (12- I T) METALLURGY AND MATERIAL TECHNLOGY (18-M M T) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E)

Material Science for Chemical Engineers Control Systems

Computer Graphics

Managerial Economics & Financial Analysis Managerial Economics & Financial Analysis

III YEAR B.TECH. I SEMESTER (R07)PAGE 4

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R07 REGULATIONSDATE OF EXAMINATION: 20-12-11 (TUESDAY) TIME OF EXAMIANTION:02.00 PM TO 05.00 PM THE SUBJECT(S) OF R07 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF R05 REGULATIONS SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF R05 REGULATIONS

BRANCH

COMPUTER SCIENCE ENGINEERING (05 CSE) INFORMATION TECHNOLOGY (12- I T)NOTE: i. ii. iii.

Microprocessor & Interfacing Microprocessor & Interfacing

Unix & Shell Programming 07A3EC17 II YR I SEM R07 Unix & Shell Programming 07A3EC17 II YR I SEM R07

ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

DATE: 02-11-11

Sd/-xxxxx CONTROLLER OF EXAMINATIONS

III YEAR B.TECH. I SEMESTER (R05)

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABADKUKATPALLY - HYDERABAD 500 085 EXAMINATION BRANCH III YEAR B.TECH - I SEMESTER R05 REGULATION (R05)- SUPPLEMENTARY EXAMINATIONS, DEC., 2011 T I M E T A B L ET I M E - 10-00 AM TO 01.00 PM DATE AND DAY BRANCH 13-12-11 TUESDAY Electrical & Electronics Engineering Computer Organization Com. to EEE, ECE, EIE, E.CON.E, ETM Hydraulic Machinery & Systems Com. to ME, AME Computer Organization Com. to EEE, ECE, EIE, E.CON.E, ETM Formal Languages & Automata Theory 15-12-11 THURSDAY Basic Reinforced Concrete Design & Drawing Electrical Measurements 17-12-11 SATURDAY Concrete Technology 20-12-11 TUESDAY Water Resources Engineering Electrical Machines-III 22-12-11 THURSDAY Structural Analysis-II Linear & Discrete Systems Analysis Design of Machine Members I Com. to ME, MEP Digital IC Applications Com. to ECE, EIE 24-12-11 SATURDAY Engineering Geology

CIVIL ENGINEERING (01-C E) ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E) MECHANICAL ENGINEERING (03-M E) ELECTRONICS AND COMMUNICATIONS ENGINEERING (04-E C E) COMPUTER SCIENCE AND ENGINEERING (05-C S E) CHEMICAL ENGINEERING (08-C H E M) ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) BIO-MEDICAL ENGINEERING (11-B M E) INFORMATION TECHNOLOGY (12- I T)

Power Systems-II

Power Electronics

MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME Mechanical Unit Operations Management Science Com. to EIE, MMT

Production Technology Com. to ME, MCT, AME

Kinematics of Machinery Com. to ME, MEP, MCT, AME Antennas And Wave Propagation Com. to ECE, ETM Operating Systems Com. to CSE, IT, EIE, E.CON.E, CSS, ECC Mass Transfer Operations-I Operating Systems Com. to CSE, IT, EIE, E.CON.E, CSS, ECC

Thermal Engineering-II Com. to ME, AME

Linear IC Applications

Digital Communication Com. to ECE, ETM

Object Oriented Analysis And Design Com. to CSE, IT, CSS Chemical Engineering Thermodynamics-II

Computer Networks Com. to CSE, IT Chemical Reaction Engineering-I Digital IC Applications Com. to ECE, EIE

Principles of Programming Languages

Energy Engineering Computer Organization Com. to EEE, ECE, EIE, E.CON.E, ETM Digital Signal Processing Com. to BME, ECC Automata & Compiler Design Com. to IT, CSS

Process Instrumentation Process Control Instrumentation Com. to EIE, ICE

Industrial Instrumentation Linear And Digital IC Applications Com. to BME, E.CON.E ECC ETM Object Oriented Analysis And Design Com. to CSE, IT, CSS

Hospital System Management MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME

Basic Clinical SciencesII

Bio Fluids And Mechanics

Bio Medical Equipment

Operating Systems Com. to CSE, IT, EIE, E.CON.E, CSS, ECC

Computer Networks Com. to CSE, IT

Web Technologies

CONTINUED ON PAGE 2

III YEAR B.TECH. I SEMESTER (R05)PAGE 2 BRANCH

13-12-11 TUESDAY Computer Organization Com. to EEE, ECE, EIE, E.CON.E, ETM,

15-12-11 THURSDAY

DATE AND DAY 17-12-11 20-12-11 SATURDAY TUESDAY

22-12-11 THURSDAY

24-12-11 SATURDAY

ELECTRONICS & CONTROL ENGINEERING (13-E Con. E) MECHANICAL ENGINEERING (MECHATRONICS) (14-MCT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15-C S S) ELECTRONICS AND TELEMATICS ENGINEERING (17-E T M) METALLURGY AND MATERIAL TECHNLOGY (18-M M T) ELECTRONICS AND COMPUTER ENGINEERING (19-E C C) MECHANICAL ENGINEERING (PRODUCTION) (20-M E P) AERONAUTICAL ENGINEERING (21-A E) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E)

Principles of Communications

Linear And Digital IC Applications Com. to BME, E.CON.E ECC ETM Production Technology Com. to ME, MCT, AME Object Oriented Analysis And Design Com. to CSE, IT, CSS Linear And Digital IC Applications Com. to BME, E.CON.E ECC ETM

Operating Systems Com. to CSE, IT, EIE, E.CON.E, CSS, ECC Kinematics of Machinery Com. to ME, MEP, MCT, AME Operating Systems Com. to CSE, IT, EIE, E.CON.E, CSS, ECC Antennas And Wave Propagation Com. to ECE, ETM

Operations Research

Process Control

Industrial Management

Finite Element Methods MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME Management Science Com. to EIE, MMT MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME Flight Mechanics-I MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME

Switching Theory and Logic Design

Machine Tools

Automata & Compiler Design Com. to IT, CSS Computer Organization Com. to EEE, ECE, EIE, E.CON.E, ETM

Optimization Techniques

Unix Programming

Basics of Telematics

Digital Communication Com. to ECE, ETM

Electrical Engineering

Mechanical Metallurgy Linear And Digital IC Applications Com. to BME, E.CON.E ECC ETM Power Plant & Turbo Machinery

Heat Treatment Technology

Iron Making

Welding Metallurgy

Digital Signal Processing Com. to BME, ECC

Operating Systems Com. to CSE, IT, EIE, E.CON.E, CSS, ECC Kinematics of Machinery Com. to ME, MEP, MCT, AME Aerospace Vehicle Structures-I

Microprocessors & Interfacing Com. to E.CC, ICE Design of Machine Members I Com. to ME, MEP

Computer Graphics

Instrumentation & Control Systems

Metrology & Quality Control

Aircraft Production Technology

Aerodynamics-II

Aerospace Propulsion-I Microprocessors & Interfacing Com. to ECC, ICE

Control Systems Process Control Instrumentation Com. to EIE, ICE

Environmental Studies

Industrial Electronics

OOPs Through Java

CONTINUED ON PAGE 3

III YEAR B.TECH. I SEMESTER (R05)PAGE 3 BRANCH

13-12-11 TUESDAY Biochemical Reaction Engineering Hydraulic Machinery & Systems Com. to ME, AME

15-12-11 THURSDAY Basic Industrial Biotechnology MEFA Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP, ICE, AME

DATE AND DAY 17-12-11 20-12-11 SATURDAY TUESDAY

22-12-11 THURSDAY Mass Transfer & Separation Design of Machine Elements

24-12-11 SATURDAY Plant Biotechnology Thermal Engineering-II Com. to ME, AME

BIOTECHNOLOGY (23-B O T) AUTOMOBILE ENGG. (24 AME)

Environmental Biotechnology Production Technology Com. to ME, MCT, AME

Genetic Engineering Kinematics of Machinery Com. to ME, MEP, MCT, AME

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R05 REGULATIONSDATE OF EXAMINATION: 17-12-11 (SATURDAY) TIME OF EXAMIANTION:02.00 PM TO 05.00 PM THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS EE 05187 ELECTRICAL & ELCTRONICS ENGG. EE05343 LINEAR DISCRETE SYSTEMS ANALYSIS HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS EE 05192 ELCTRICAL ENGINEERING HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS EE 05323 INSTRUMENTATION & CONTROL SYSTEMS HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS BT 05071 BASIC INDUSTRIAL BITO TECHNOLOGY SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS ENVIRONMENTAL STUDIES CE 05239 II YEAR II SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR II SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR I SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR II SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR II SEM R05 COMPUTER ORGANIZATION IT2224 II YEAR II SEM RR ENVIRONMENTAL STUDIES CE 05239 II YEAR II SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR I SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR II SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR I SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR II SEM R05 INDUSTRI INSTRUMENTAION EI 05309 II YEAR II SEM R05 ENVIRONMENTAL STUDIES CE 05239 II YEAR II SEM R05 CONTINUED ON PAGE 4

BRANCH

CIVIL ENGINEERING (01 CE) ELECTRICAL AND ELECTRONICS ENGINEERING (02 - EEE) ELECTRONICS & COMMUNICATION ENGINEERING (04 ECE) COMPUTER SCIENCE ENGINEERING (05 CSE) INFORMATION TECHNOLOGY (12 IT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15 - CSS) ELECTRONICS AND TELEMATICS ENGINEERING (17 - ETM) METALLURGY AND MATERIAL TECHNOLOGY (18 - MMT) ELECTRONICS AND COMPUTER ENGINEERING (19 - ECC)

MECHANICAL (PRODUCTION) ENGINEERING (20 MEP)

III YEAR B.TECH. I SEMESTER (R05)

PAGE : 4

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R05 REGULATIONSDATE OF EXAMINATION: 20-12-11 (TUESDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS CS 3121 INTERFACING THROUGH MICROPROCESSORS III YEAR I SEM RR ADVANCED DATA STRUCTURES CS 05007 II YEAR I SEM R05 IT 3121 INTER FACING THROUGH MICROPROCESSORS III YEAR I SEM RR CSS 3122 INTERFACING THROUGH MICROPROCESSORS III YEAR I SEM RR CONTROL SYSTEMS EE 05149 II YEAR II SEM R05 PULSE AND DIGITAL CIRCUITS EC 05497 II YEAR II SEM R05

BRANCH

COMPUTER SCIENCE ENGINEERING (05 CSE)

CS 05435 OPERATING SYSTEM CS 05435 OPERATING SYSTEM CS 05435 OPERATING SYSTEM EC 05342 LINEAR AND DITITAL IC APPLICATIONS CS 05434 OOPS THROUGH JAVA

INFORMATION TECHNOLOGY (12 IT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15 - CSS) ELECTRONICS AND COMPUTER ENGINEERING (19 - ECC) INSTRUMENTATION AND CONTROL ENGINEERING (22 ICE)

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R05 REGULATIONSDATE OF EXAMINATION: 22-12-11 (THURSDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF NR REGULATIONS HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF NR REGULATIONS COMPUTER ORGANIZATION IT2224 II YEAR II SEM RR

BRANCH

INFORMATION TECHNOLOGY (12 IT) NOTE: i. ii. iii.

ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

DATE: 02-11-11

Sd/-xxxxx CONTROLLER OF EXAMINATIONS

III YEAR B.TECH. I SEMESTER (RR) JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABADKUKATPALLY - HYDERABAD 500 085 EXAMINATION BRANCH III YEAR B.TECH - I SEMESTER REVISED REGULATIONS (RR) - SUPPLEMENTARY EXAMINATIONS, DEC., 2011 T I M E T A B L ET I M E - 10-00 AM TO 01.00 PM DATE AND DAY BRANCH 13-12-11 TUESDAY STRUCTURAL ENGINEERING DESIGN AND DRAWING I (RCC) COMPUTER ORGANISATION (Common to EEE, EIE, ECE, ETM, ICE) 15-12-11 THURSDAY 17-12-11 SATURDAY CONCRETE TECHNOLOGY AND PRESTRESSED CONCRETE 20-12-11 TUESDAY 22-12-11 THURSDAY 24-12-11 SATURDAY MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS (Common to CE, BOT, ME, MEP, MMT) MANAGEMENT SCIENCE (Common to EEE, ECE, MCT, ICE, BME, CSS, EconE, EIE MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS (Common to CE, BOT, ME, MEP, MMT) MANAGEMENT SCIENCE (Common to EEE, ECE, MCT, ICE, BME, CSS, EconE, EIE OBJECT ORIENTED ANALYSIS AND DESIGN THROUGH U M L (Common to CSE, IT) ENERGY ENGINEERING

CIVIL ENGINEERING (01-C E)

ENVIRONMENTAL ENGINE ERING I

WATER RESOURCES ENGINEERING I

ENGINEERING GEOLOGY

ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E)

ELECTRICAL MEASUREMENTS

POWER SYSTEMS II

POWER ELECTRONICS

ELECTRO-MECHANICS III

MECHANICAL ENGINEERING (03-M E) ELECTRONICS AND COMMUNICATIONS ENGINEERING (04-E C E) COMPUTER SCIENCE AND ENGINEERING (05-C S E) CHEMICAL ENGINEERING (08-C H E M) ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E)

PRODUCTION TECHNOLOGY

KINEMATICS OF MACHINES (Common to ME, MEP, MCT) ANTENNAS AND WAVE PROPAGATION (Common to ECE, ETM) DATA COMMUNICATION (Common to CSE, IT, CSS) CHEMICAL ENGINEERING THERMODYNAMICS II PROCESS CONTROL INSTRUMENTATION (Common to EIE, ICE)

THERMAL ENGINEERING II

HYDRAULIC MACHINERY AND SYSTEMS

DESIGN OF MACHINE MEMBERS I (Common to ME, MEP)

COMPUTER ORGANISATION (Common to EEE, EIE, ECE, ETM, ICE) INTERFACING THROUGH MICROPROCESSORS (Common to CSE, IT, CSS) MECHANICAL UNIT OPERATIONS COMPUTER ORGANISATION (Common to EEE, EIE, ECE, ETM, ICE)

DIGITAL COMMUNICATION (Common to ECE, ETM) THEORY OF COMPUTATION (Common to CSE, CSS)

LINEAR I C APPLICATIONS

DIGITAL I C APPLICATIONS PRINCIPLES OF PROGRAMMING LANGUAGES (Common to CSE, CSS) MASS TRANSFER OPERATIONS I LINEAR AND DIGITAL IC APPLICATIONS (Common to EIE, ETM, BME, Econ.E, MCT)

ARTIFICIAL INTELLIGENCE

HEAT TRANSFER

PROCESS INSTRUMENTATION

ELECTRONIC EQUIPMENT DESIGN (Common to EIE, ICE)

INDUSTRIAL INSTRUMENTATION

MANAGEMENT SCIENCE (Common to EEE, ECE, MCT, ICE, BME, CSS, EconE, EIE CONTINUED ON PAGE 2

III YEAR B.TECH. I SEMESTER (RR)PAGE 2 BRANCH

13-12-11 TUESDAY

15-12-11 THURSDAY

DATE AND DAY 17-12-11 20-12-11 SATURDAY TUESDAY

22-12-11 THURSDAY LINEAR AND DIGITAL IC APPLICATIONS (Common to EIE, ETM, BME, Econ.E, MCT)

24-12-11 SATURDAY MANAGEMENT SCIENCE (Common to EEE, ECE, MCT, ICE, BME, CSS, EconE, EIE OBJECT ORIENTED ANALYSIS AND DESIGN THROUGH UML (Common to CSE, IT) MANAGEMENT SCIENCE (Common to EEE, ECE, MCT, ICE, BME, CSS, EconE, EIE) MANAGEMENT SCIENCE (Common to EEE, ECE, MCT, ICE, BME, CSS, EconE, EIE) MANAGEMENT SCIENCE (Common to EEE, ECE, MCT, ICE, BME, CSS, EconE, EIE) MICROWAVE ENGINEERING MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS (Common to CE, BOT, ME, MEP, MMT) EMBEDDED SYSTEMS DESIGN

BIO-MEDICAL ENGINEERING (11-B M E)

BIO-FLUIDS AND MECHANICS

DIGITAL SIGNAL PROCESSING (Common to BME, ECC)

BASIC CLINICAL SCIENCES II

BIO-MEDICAL EQUIPMENT

INFORMATION TECHNOLOGY (12- I T) ELECTRONICS & CONTROL ENGINEERING (13-E Con. E) MECHANICAL ENGINEERING (MECHATRONICS) (14-MCT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15-C S S) ELECTRONICS AND TELEMATICS ENGINEERING (17-E T M) METALLURGY AND MATERIAL TECHNLOGY (18-M M T) ELECTRONICS AND COMPUTER ENGINEERING (19-E C C)

INTERFACING THROUGH MICROPROCESSORS (Common to CSE, IT, CSS)

DATA COMMUNICATIONS (Common to CSE, IT, CSS)

SOFTWARE ENGINEERING

COMMUNICATION THEORY

COMPUTER GRAPHICS (Common to ECC, IT)

OPERATIONS RESEARCH

COMMUNICATION ENGINEERING

PROCESS CONTROL

COMPUTER OPERATING SYSTEMS

LINEAR AND DIGITAL IC APPLICATIONS (Common to EIE, ETM, BME, Econ.E, MCT) LINEAR AND DIGITAL IC APPLICATIONS (Common to EIE, ETM, BME, Econ.E, MCT) PRINCIPLES OF PROGRAMMING LANGUAGES (Common to CSE, CSS) LINEAR AND DIGITAL IC APPLICATIONS (Common to EIE, ETM, BME, Econ.E, MCT)

MANUFACTURING TECHNOLOGY

KINEMATICS OF MACHINES (Common to ME, MEP, MCT) DATA COMMUNICATIONS (Common to CSE, IT, CSS)

DIGITAL ELECTRONICS

FINITE ELEMENT METHOD

INTERFACING THROUGH MICROPROCESS-ORS (Common to CSE, IT, CSS) COMPUTER ORGANISATION (Common to EEE, EIE, ECE, ETM, ICE)

THEORY OF COMPUTATION (Common to CSE, CSS)

SYSTEMS PROGRAMMING

ANTENNA AND WAVE PROPAGATION (Common to ECE, ETM)

DIGITAL COMMUNICATION (Common to ECE, ETM)

BASICS OF TELEMATICS

PROBABILITY AND STATISTICS

MECHANICAL METALLURGY

HEAT TREATMENT TECHNOLOGY

METALLURGICAL THERMODYNAMICS

TECHNIQUES OF METAL JOINING

DIGITAL SYSTEM DESIGN

DIGITAL SIGNAL PROCESSING (Common to BME, ECC)

MICROPROCESSORS AND INTERFACING

OPERATING SYSTEMS AND SYSTEMS PROGRAMMING

COMPUTER GRAPHICS (Common to ECC, IT)

CONTINUED ON PAGE 3

III YEAR B.TECH. I SEMESTER (RR) PAGE-3BRANCH

13-12-11 TUESDAY

15-12-11 THURSDAY KINEMATICS OF MACHINES (Common to ME, MEP, MCT) AIRCRAFT STRUCTURES I PROCESS CONTROL INSTRUMENTATION (Common to EIE, ICE)

DATE AND DAY 17-12-11 20-12-11 SATURDAY TUESDAY

22-12-11 THURSDAY

24-12-11 SATURDAY MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS (Common to CE, BOT, ME, MEP, MMT) AIRCRAFT PRODUCTION TECHNOLOGY MANAGEMENT SCIENCE (Common to EEE, ECE, MCT, ICE, BME, CSS, EconE, EIE MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS (Common to CE, BOT, ME, MEP, MMT) DESIGN OF MACHINE ELEMENTS

MECHANICAL ENGINEERING (PRODUCTION) (20-M E P) AERONAUTICAL ENGINEERING (21-A E) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E)

MICROPROCESSORS AND INTERFCING

METROLOGY AND QUALITY CONTROL

TURBO MACHINERY

DESIGN OF MACHINE MEMBERS I (Common to ME, MEP) WIND TUNNEL TECHNIQUES

AIRCRAFT PERFORMANCE COMPUTER ORGANISATION (Common to EEE, EIE, ECE, ETM, ICE)

AEROSPACE PROPULSION I ELECTRONIC EQUIPMENT DESIGN (Common to EIE, ICE)

AERODYNAMICS II

ANALYTICAL INSTRUMENTATION

INDUSTRIAL ELECTRONICS

BIOTECHNOLOGY (23-B O T)

MASS TRANSFER AND SEPARATION MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS

GENETIC ENGINEERING

BIO-CHEMICAL ENGINEERING

PLANT BIO-TECHNOLOGY HYDRAULIC MACHINERY AND SYSTEMS

ENVIRONMENTAL BIOTECHNOLOGY

AUTOMOBILE ENGG. (24 AME)

PRODUCTION TECHNOLOGY

KINEMATICS OF MACHINERY

THERMAL ENGINEERING II

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF RR REGULATIONSDATE OF EXAMINATION: 17-12-11 (SATURDAY) TIME OF EXAMIANTION:02.00 PM TO 05.00 PM THE SUBJECT(S) OF RR REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF NR REGULATIONS SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF NR REGULATIONS

BRANCH

MECHANICAL ENGINEERING (03 ME) MECHANICAL ENGINEERING (PRODUCTION) (20 MEP)

PRODUCTION TECHNOLOGY

BASIC ELECTRONICS (COURSE NUMBER MP2124) OFFERED AT II B.TECH.M (P) E. I SEMESTER OF 2002-2003 REGULATIONS CONTINUED ON PAGE 4

III YEAR B.TECH. I SEMESTER (RR)PAGE - 4

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF RR REGULATIONSDATE OF EXAMINATION: 20-12-11(TUESDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM THE SUBJECT(S) OF RR REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF NR REGULATIONS SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF NR REGULATIONS STRUCTURAL ANALYSIS-I (COURSE NUMBER CE 3102 OFFERED AT III B.TECH (CE) I SEMESTER OF 1999-2000 RGULATIONS) INSTRUMENTATION & CONTROL SYSTEMS (COURSE NUMBER ME 3203 OFFERED AT III BTECH, (ME) IISEMESTER OF 1999-2000 REGULATIONS) COMPUTER GRAPHICS (COURSE NUMBER ECM 3126 OFFERED AT III B.TECH, (ECM) I-SEMESTER OF 2002-2003 REGULATIONS) PETROCHEMICAL ENGINEERING (COURSE NUMBER CH 3206 OFFERED AT III B.TECH, (CHE) II SEMESTER OF 1999-2000 REGULATIONS IN ELECTIVE-I) COMPUTERS IN MEDICINES (COURSE NUMBER BME 305 OFFERED AT III B.TECH, (BME) I SEMESTER OF 1999-2000 REGUATIONS) DATABASE MANAGEMENT SYSTEMS (COURSE NUMBER IT 3106 OFFERED AT III BTECH, (IT) I SEMESTER OF 1999-2000 REGULATIONS) THEORY OF COMPUTATION (COURSR NUMBER IT-3104 OFFERED AT III BTECH, (CSIT) I SEMSTER OF 1999-2000 REGULATONS) COMPUTER GRAPHICS (COURSE NUMBER OFFERED AT III BTECH, ME(MECH) ISEMESTER OF 1999-2000 REGULARIONS) DESIGN & ANALYSIS OF ALGORITHMS (COURSE NUMBER CSS 3105 OFFERED AT III B.TECH,(CSSE) I-SEMESTER OF 1999-2000 REGULATIONS) ENTREPRENEURSHIP AND MANAGEMENT (COURSE NUMBER OFFERED AT IV BTECH, ME(PROD) IISEMESTER OF 1999-2000 REGULATIONS)

BRANCH

CIVIL ENGNEERING (01-C E) MECHANICAL ENGINEERING (03 ME) MECHANICAL ENGINEERING (PRODUCTION) (20 MEP) ELECTRONICS & COMMUNICATION ENGINEERING (04 ECE) CHEMICAL ENGINEERING (08-C H E M) BIO-MEDICAL ENGINEERING (11-B M E)

CH 3122 STRUCTURAL ENGINEERING

ME 3124 KINEMATICS OF MACHINES

EC 3121 MANAGEMENT SCIENCE

CH 3121 ENERGY ENGINEERING

BM 3125 BIO-FLUIDS AND MECHANICS

INFORMATION TECHNOLOGY (12 IT)

IT 3124 COMMUNICATION THEORY

MECHANICAL ENGINEERING (MECHATRONICS) (14-MCT) COMPUTER SCIENCE & SYSTEMS ENGINEERING (15-C S S) MECHANICAL ENGINEERING (PRODUCTION) (20 MEP) NOTE: i. ii. iii.

MC 3125 KINEMATICS OF MACHINES

CSS 3121 PRINCIPLES OF PROGRAMMING LANGUAGES MP3121 MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

DATE: 02-11-11

Sd/-xxxxx CONTROLLER OF EXAMINATIONS

III YEAR B.TECH. II SEMESTER (R07)

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABADKUKATPALLY - HYDERABAD 500 085 EXAMINATION BRANCH

III YEAR B.TECH - II SEMESTER R07 REGULATION (R07) SUPPLEMENTARY EXAMINATIONS, DEC. JAN., 2011-2012T I M E T A B L E T I M E : 10-00 AM TO 01-00 PM DATE & DAY BRANCH

28-12-11 WEDENSDAY DESIGN OF STEEL STRUCTURES DIGITAL SIGNAL PROCESSING (Common to EEE, ECE, EIE, E.CON.E, ETM, ICE) CAD/CAM (Common to ME, MECT, MEP, AME) DIGITAL SIGNAL PROCESSING (Common to EEE, ECE, EIE, E.CON.E, ETM, ICE) ARTIFICIAL INTELLIGENCE AND NEURAL NETWORKS

30-12-11 FRIDAY

02-01-12 MONDAY

04-01-11 WEDENSDAY

06-01-12 FRIDAY

09-01-12 MONDAY

CIVIL ENGINEERING (01- CE) ELECTRICAL AND ELECTRONICS ENGINEERING (02 - EEE) MECHANICAL ENGINEERING (03 - ME) ELECTRONICS & COMMUNICATIONS ENGINEERING (04 - ECE) COMPUTER SCIENCE & ENGINEERING (05 - CSE) CHEMICAL ENGINEERING (08 - CHEM)

ENVIRONMENTAL ENGINEERING MANAGEMENT SCIENCE (Common to EEE, ECE, CHEM, E.CON.E, ETM, MMT, E.COMP.E, ICE.) DESIGN OF MACHINE MEMBERS-II (Common to ME, MEP) MANAGEMENT SCIENCE (Common to EEE, ECE, CHEM, E.CON.E, ETM, MMT, E.COMP.E, ICE.)

ESTIMATING AND COSTING MICRO PROCESSORS AND MICRO CONTROLLERS (Common to EEE, E.CON.E) INDUSTRIAL MANAGEMENT (Common to ME, MEP, AME) MICRO PROCESSORS AND INTERFACING (Common to ECE, EIE, BME, ETM)

GEOTECHNICAL ENGINEERING I VLSI DESIGN (Common to EEE, ECE, BME, E.CON.E, ETM)

TRANSPORTATION ENGINEERING

WATER RESOURCES ENGINEERING II

INSTRUMENTATION

SWITCH GEAR AND PROTECTION

THERMAL ENGINEERING-II

REFRIGERATION AND AIR CONDITIONING

METROLOGY AND SURFACE ENGINEERING

VLSI DESIGN (Common to EEE, ECE, BME, E.CON.E, ETM)

MICRO WAVE ENGINEERING (Common to ECE, ETM) OBJECT ORIENTED ANALYSIS AND DESIGN (Common to CSE, IT, CSSE,)

TELECOMMUNICATIONS SWITCHING SYSTEMS

INFORMATION SECURITY MANAGEMENT SCIENCE (Common to EEE, ECE, CHEM, E.CON.E, ETM, MMT, E.COMP.E, ICE.) AUTOMATION OF INDUSTRIAL PROCESSES

COMPUTER NETWORKS (Common to CSE,IT, CSSE, E.COMP.E,)

OPERATING SYSTEMS

COMPILER DESIGN

BIO CHEMICAL ENGINEERING

CHEMICAL REACTION ENGINEERING -II

CHEMICAL TECHNOLOGY

MASS TRANSFER OPERATIONS II

PROCESS DYNAMICS AND CONTROL

ELECTRONICS AND INSTRUMENTATION ENGINEERING (10 - EIE)

DIGITAL SIGNAL PROCESSING (Common to EEE, ECE, EIE, E.CON.E, ETM, ICE)

MICRO PROCESSORS AND INTERFACING (Common to ECE, EIE, BME, ETM)

PRINCIPLES OF COMMUNICATION (Common to EIE, ICE)

BIOMEDICAL INSTRUMENTATION

OPTOELECTONIC AND LASER INSTRUMENTATION

CONTINUED ON PAGE 2

III YEAR B.TECH. II SEMESTER (R07)PAGE 2 DATE & DAY BRANCH

28-12-11 WEDENSDAY

30-12-11 FRIDAY

02-01-12 MONDAY MICRO PROCESSORS AND INTERFACING (Common to ECE, EIE, BME, ETM) COMPUTER NETWORKS (Common to CSE, IT, CSSE, E.COMP.E, )MICRO PROCESSORS AND MICRO CONTROLLERS (Common to EEE, E.CON.E)

04-01-11 WEDENSDAY

06-01-12 FRIDAY

09-01-12 MONDAY

BIO -MEDICAL ENGINEERING (11 - BME) INFORMATION TECHNOLOGY (12 -IT)

BIOLOGICAL CONTROL SYSTEMS WEB TECHNOLOGIES (Common to IT, CSSE) DIGITAL SIGNAL PROCESSING (Common to EEE, ECE, EIE, E.CON.E, ETM, ICE) CAD/CAM (Common to ME, MECT, MEP, AME) WEB TECHNOLOGIES (Common to CSSE, IT) DIGITAL SIGNAL PROCESSING (Common to EEE, ECE, EIE, E.CON.E, ETM, ICE)

BIOMEDICAL SIGNAL PROCESSING

VLSI DESIGN (Common to EEE, ECE, BME, E.CON.E, ETM) DATA WARE HOURSING AND DATA MINING

LASER AND FIBER OPTICS IN MEDICINE OBJECT ORIENTED ANALYSIS AND DESIGN (Common to CSE, IT, CSSE,)ADVANCED CONTROL SYSTEMS

MEDICAL IMAGING TECHNIQUES

E-COMMERCE

MIDDLE WARE TECHNOLOGIES

ELECTRONICS AND CONTROL ENGINEERING (13 - E.CON.E) MECHATRONICS (14 - MECT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15 CSSE) ELECTRONICS AND TELEMATICS ENGINEERING (17 ETM)

MANAGEMENT SCIENCE (Common to EEE, ECE, CHEM, E.CON.E, ETM, MMT, E.COMP.E, ICE.)

VLSI DESIGN (Common to EEE, ECE, BME, E.CON.E, ETM)

POWER PLANT INSTURMENTATION AND CONTROL

COMPUTER ORGANIZATION

DYNAMICS OF MACHINERY COMPUTER NETWORKS (Common to CSE, IT, CSSE, E.COMP.E, ) MICRO PROCESSORS AND INTERFACING (Common to ECE, EIE, BME, ETM)

INSTRUMENTATION AND CONTROL SYSTEMS ADVANCED COMPUTER ARCHITECTURE

ARTIFICIAL INTELLIGENCE

LINEAR AND DIGITAL IC APPLICATIONS OBJECT ORIENTED ANALYSIS AND DESIGN (Common to CSE, IT, CSSE,) MICRO WAVE ENGINEERING (Common to ECE, ETM)

PRINCIPLES OF MACHINE DESIGN MATHEMATICAL MODELLING AND SIMMULATION

MANAGEMENT SCIENCE (Common to EEE, ECE, CHEM, E.CON.E, ETM, MMT, E.COMP.E, ICE.) MANAGEMENT SCIENCE (Common to EEE, ECE, CHEM, E.CON.E, ETM, MMT, E.COMP.E, ICE.) MANAGEMENT SCIENCE (Common to EEE, ECE, CHEM, E.CON.E, ETM, MMT, E.COMP.E, ICE.)

VLSI DESIGN (Common to EEE, ECE, BME, E.CON.E, ETM)

TELECOMMUNICATION SWITCHING SYSTEMS AND NETWORKS

METALLURGY AND MATERIAL TECHNOLOGY (18 - MMT)

FOUNDARY TECHNOLOGY

MECHANICAL WORKING OF METALS

NON FERROUS EXTRACTIVE METALLURGY

POWDER METALLURGY

STEEL MAKING

ELECTRONICS AND COMPUTER ENGINEERING (19 ECOMP.E)

DESIGN AND ALANYSIS OF ALGORITHMS

COMPUTER NETWORKS (Common to CSE, IT, CSSE, E.COMP.E, )

DIGITAL IMAGE PROCESSING

EMBIDED AND REAL TIME SYSTEMS

SOFTWARE ENGINEERING

CONTINUED ON PAGE 3

III YEAR B.TECH. II SEMESTER (R07)PAGE 3 DATE & DAY BRANCH

28-12-11 WEDENSDAY

30-12-11 FRIDAY

02-01-12 MONDAY INDUSTRIAL MANAGEMENT (Common to ME, MEP, AME) FINITE ELEMENT AND MODELLING METHODS

04-01-11 WEDENSDAY

06-01-12 FRIDAY

09-01-12 MONDAY

PRODUCTION ENGINEERING (MECHANICAL) (20 MEP) AERONUTICAL ENGINEERING (21 - AE) INSTRUMENTATION AND CONTROL ENGINEERING (22-ICE)

CAD/CAM (Common to ME, MECT, MEP, AME)

DESIGN OF MACHINE MEMBERS-II (Common to ME, MEP)

METAL FORMING

METROLOGY AND QUALITY CONTROL

TOOL DESIGN

AEROSPACE PROPULSION-II

AEROSPACE VEHICLE STRUCTURES-II MANAGEMENT SCIENCE (Common to EEE, ECE,M, E.CON.E, ETM, MMT, E.COMP.E, ICE.) COMPUTATIONAL MOLECULAR BIOLOGY

FLIGHT MECHANICSII

FLIGHT VEHICLE DESIGN

INTRODUCTION TO SPACE TECHNOLOGY

DIGITAL SIGNAL PROCESSING (Common to ECE, E.Con.E, EEE, EIE, ETM, ICE)

ANALYTICAL INSTRUMENTATION

PRINCIPLES OF COMMUNICATION (Common to EIE, ICE)

DIGITAL AND OPTIMAL CONTROL SYSTEMS

PC BASED INSTRUMENTATION

BIOTECHNOLOGY (23-BT)

BIOCHEMICAL REACTION ENGINEERING-II

HEAT TRANSFER IN BIOPROCESSES

IMMUNOLOGY

INSTRUMENTATION AND BIO PROCESS CONTROL

PROBABILITY AND STATISTICS

AUTOMOBILE ENGINEERING (24-AME)

CAD/CAM (Common to ME, MECT, MEP, AME)

AUTOMOTIVE ELECTRICAL AND AUTOTRONICS

INDUSTRIAL MANAGEMENT (Common to ME, MEP, AME)

MACHINE TOOLS AND METROLOGY

ROBOTICS

VEHICLE DYNAMICS

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R07 REGULATIONSDATE OF EXAMINATION: 02-01-12 (MONDAY) THE SUBJECT(S) OF R07 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF R05 REGULATIONS COMPUTER NETWORKS OBJECT ORIENT ANALYSIS & DESIGN OBJECTIVE ORIENTED ANALYSIS AND DESIGN TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF R05 REGULATIONS UNIX ANS SHELL PROGRAMMING DATA COMMUNICATION SYSTEMS CSE III YEAR I SEM R07 UNIX ANS SHELL PROGRAMMING CONTINUED ON PAGE 4

BRANCH

COMPUTER SCIENCE & ENGINEERING (05 CSE) INFORMATION TECHNOLOGY (12 -IT)

III YEAR B.TECH. II SEMESTER (R07)PAGE 4

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R07 REGULATIONSDATE OF EXAMINATION: 04-01-12 (WEDNESDAY) THE SUBJECT(S) OF R07 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF R05 REGULATIONS THERMAL ENGINEERING-IICHEMICAL TECHNOLOGY

TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF R05 REGULATIONS TOTAL QUALITY MANAGEMENT HEAT TRANSFERMOMENTUM TRANSFER

BRANCH

MECHANICAL ENGINEERING (03 - ME) CHEMICAL ENGINEERING (08 - CHEM) COMPUTER SCIENCE & ENGINEERING (05 - CSE) INFORMATION TECHNOLOGY (12 -IT)

OPERATING SYSTEMS (OR) COMPUTER NETWORKS COMPUTER NETWORKS

COMPUTER GRAPHICS DISTRUBUTED DATABASES

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R07 REGULATIONSDATE OF EXAMINATION: 10-01-12 (TUESDAY) THE SUBJECT(S) OF R07 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF R05 REGULATIONS OBJECTIVE ORIENTED ANALYSIS AND DESIGN (OR) OPERATING SYSTEMS WEB TECHNOLOGIES TIME OF EXAMIANTION: 10.00 AM TO 01.00 PM SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF R05 REGULATIONS

BRANCH

COMPUTER SCIENCE & ENGINEERING (05 - CSE) INFORMATION TECHNOLOGY (12 -IT)

SOFTWARE TESTING METHODLOGY SOFTWARE TESTING METHODOLOGIES

NOTE: i. ii. iii.

ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

DATE: 02-11-11

Sd/-xxxxx CONTROLLER OF EXAMINATIONS

III YEAR B.TECH. II SEMESTER (R05)

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABADKUKATPALLY - HYDERABAD 500 085 EXAMINATION BRANCH

III YEAR B.TECH - II SEMESTER R05 REGULATION (R05) SUPPLEMENTARY EXAMINATIONS, DEC. JAN., 2011-2012 T I M E T A B L ET I M E : 10-00 AM TO 01-00 PMDATE & DAY BRANCH

28-12-11 WEDENSDAY GEO TECHNICAL ENGINEERING DIGITAL SIGNAL PROCESSING (EEE, ECE, EIE, E.Con.E, ETM, ICE) INDUSTRIAL MANAGEMENT (ME, MEP, AME) DIGITAL SIGNAL PROCESSING (EEE, ECE, EIE, E.Con.E, ETM, ICE) COMPUTER GRAPHICS

30-12-11 FRIDAY ENVIRONMENTAL ENGINEERING I MICROPROCESSORS AND MICROCONTROLLERS METROLOGY AND SURFACE ENGINEERING TELECOMMUNICATION SWITCHING SYSTEMS AND NETWORKS (ECE, ETM) COMPILER DESIGN

02-01-12 MONDAY BASIC STRUCTURAL STEEL DESIGN AND DRAWING MANAGEMENT SCIENCE (EEE, ECE, CHEM, E.Con.E., ETM, ECC, ICE)

04-01-11 WEDENSDAY WATER RESOURCES ENGINEERING-II

06-01-12 FRIDAY ESTIMATING QUANTITY SURVEY AND VALUATION SWITCHGEAR AND PROTECTION DESIGN OF MACHINE MEMBERS II (ME, MEP) MICRO WAVE ENGINEERING (ECE, ETM)

09-01-12 MONDAY TRANSPORTATION ENGINEERING HIGH VOLTAGE ENGINEERING

CIVIL ENGINEERING (01-C E) ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E) MECHANICAL ENGINEERING (03-M E) ELECTRONICS AND COMMUNICATIONS ENGINEERING (04-E C E) COMPUTER SCIENCE AND ENGINEERING (05-C S E)

INSTRUMENTATION DYNAMICS OF MACHINERY (ME, MCT, MEP, AME) VLSI DESIGN (ECE, BME,ETM)

MACHINE TOOLS

HEAT TRANSFER (ME, AME) MICROPROCESSORS AND INTER FACING (ECE, EIE, BME, E.Con.E., ETM) SOFTWARE TESTING METHODOLOGIES (CSE, IT)

MANAGEMENT SCIENCE (EEE, ECE, CHEM, E.Con.E., ETM, ECC, ICE) UNIX PROGRAMMING (CSE, IT)

INFORMATION SECURITY

NEURAL NETWORKS

CHEMICAL ENGINEERING (08-C H E M)

MASS TRANSFER OPERATION II

CHEMICAL REACTION ENGINEERING II

MANAGEMENT SCIENCE (EEE, ECE, CHEM, E.Con.E., ETM, ECC, ICE)

PROCESS DYNAMICS CONTROL

ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E) BIO-MEDICAL ENGINEERING (11-B M E)

DIGITAL SIGNAL PROCESSING (EEE, ECE, EIE, E.Con.E, ETM, ICE) BIOLOGICAL CONTROL SYSTEMS

PRINCIPLES OF COMMUNICATION (EIE, ICE) LASER AND FIBER OPTICS IN MEDICINE

AUTOMATION OF INDUSTRIAL PROCESSES

OPTO ELECTRONIC AND LASER INSTRUMENTATION VLSI DESIGN (ECE, BME,ETM)

BIO MEDICAL SIGNAL PROCESSING

POLYMER TECHNOLOGY FERTILIZER TECHNOLOGY BIO CHEMICAL PETROLEUM AND ENGINEERING PETRO CHEMICAL TECHNOLOGY FLUIDIZATION ENGINEERING MICROPROCESSORS BIOMEDICAL AND INTER FACING INSTRUMENTATION (ECE, EIE, BME, E.Con.E., ETM) MICROPROCESSORS MEDICAL IMAGING AND INTER FACING TECHNIQUES (ECE, EIE, BME, E.Con.E., ETM) CONTINUED ON PAGE 2

III YEAR B.TECH. II SEMESTER (R05)PAGE 2 DATE & DAY BRANCH

28-12-11 WEDENSDAY

30-12-11 FRIDAY

02-01-12 MONDAY

04-01-11 WEDENSDAY

06-01-12 FRIDAY

09-01-12 MONDAY SOFTWARE TESTING METHODOLOGIES (CSE, IT) MICROPROCESSORS AND INTER FACING (ECE, EIE, BME, E.Con.E., ETM) COMPUTER ORGANIZATION

INFORMATION TECHNOLOGY (12- I T) ELECTRONICS & CONTROL ENGINEERING (13-E Con. E) MECHANICAL ENGINEERING (MECHATRONICS) (14-MCT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15-C S S) ELECTRONICS AND TELEMATICS ENGINEERING (17-E T M) METALLURGY AND MATERIAL TECHNLOGY (18-M M T) ELECTRONICS AND COMPUTER ENGINEERING (19-E C C) MECHANICAL ENGINEERING (PRODUCTION) (20-M E P) AERONAUTICAL ENGINEERING (21-A E) INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E) BIOTECHNOLOGY (23-B O T)

HUMAN COMPUTER INTERACTION DIGITAL SIGNAL PROCESSING (EEE, ECE, EIE, E.Con.E, ETM, ICE) CAD/CAM

DATAWAREHOUSING AND DATA MINING COMPUTER NETWORKS (E.Con.E, CSS, ECC)

UNIX PROGRAMMING (CSE, IT) MANAGEMENT SCIENCE (EEE, ECE, CHEM, E.Con.E., ETM, ECC, ICE) PRINCIPLES OF MACHINE DESIGN

E COMMERCE

MIDDLEWARE TECHNOLOGIES ADVANCED CONTROL SYSTEMS

ROBOTICS AND AUTOMATION DYNAMICS OF MACHINERY (ME, MCT, MEP, AME) ADVANCED COMPUTER ARCHITECTURE VLSI DESIGN (ECE, BME,ETM)

INSTRUMENTATION AND CONTROL SYSTEM

LINEAR & DIGITAL I.C. APPLICATIONS

MATHEMATICAL MODELING AND SIMULATION DIGITAL SIGNAL PROCESSING (EEE, ECE, EIE, E.Con.E, ETM, ICE) BASIC ELECTRONICS

COMPUTER NETWORKS (E.Con.E, CSS, ECC) TELECOMMUNICATION SWITCHING SYSTEMS AND NETWORKS (ECE, ETM) NON FERROUS EXTRACTIVE METALLURGY COMPUTER NETWORKS (E.Con.E, CSS, ECC)

SYSTEMS PROGRAMMING MANAGEMENT SCIENCE (EEE, ECE, CHEM, E.Con.E., ETM, ECC, ICE) MECHANICAL WORKING OF METALS MANAGEMENT SCIENCE (EEE, ECE, CHEM, E.Con.E., ETM, ECC, ICE) FOUNDRY AND WELDING AEROSPACE PROPULSION II MANAGEMENT SCIENCE (EEE, ECE, CHEM, E.Con.E., ETM, ECC, ICE) HEAT TRANSFER IN BIO PROCESSORS

WEB TECHNOLOGIES

ARTIFICIAL INTELLIGENCE MICROPROCESSORS AND INTER FACING (ECE, EIE, BME, E.Con.E., ETM) POLY MERIC MATERIALS

MICRO WAVE ENGINEERING (ECE, ETM)

FOUNDARY TECHNOLOGY

STEEL MAKING

EMBEDDED AND REAL TIME SYSTEMS INDUSTRIAL MANAGEMENT (ME, MEP, AME) FLIGHT MECHANICS II DIGITAL SIGNAL PROCESSING (EEE, ECE, EIE, E.Con.E, ETM, ICE) BIO INFORMATICS

DIGITAL IMAGE PROCESSING DYNAMICS OF MACHINERY (ME, MCT, MEP, AME) COMPUTATIONAL AERO DYNAMICS DIGITAL AND OPTIMAL CONTROL SYSTEMS INSTRUMENTATION AND PROCESS CONTROL

SOFTWARE ENGINEERING DESIGN OF MACHINE MEMBERS II (ME, MEP) FINITE ELEMENT AND MODELING METHODS PC BASED INSTREMENTATION

DESIGN AND ANALYSIS OF ALGORITHMS

TOOL DESIGN

METAL FORMING

AERO SPACE VECHILE STRUCTURES II PRINCIPLES OF COMMUNICATION (EIE, ICE) ENZYME ENGG.

INTRODUCTION TO SPACE TECHNOLOGY ANALYTICAL INSTRUMENTATION REGULATORY AFFAIRS AND CLINICAL TRIALS

IMMUNOLOGY

CONTINUED ON PAGE 3

III YEAR B.TECH. II SEMESTER (R05)PAGE 3 DATE & DAY BRANCH

28-12-11 WEDENSDAY INDUSTRIAL MANAGEMENT (ME, MEP, AME)

30-12-11 FRIDAY MACHINE TOOLS AND METROLOGY

02-01-12 MONDAY

04-01-11 WEDENSDAY DYNAMICS OF MACHINERY (ME, MCT, MEP, AME)

06-01-12 FRIDAY AUTOMATIVE ELECTRICAL AND AUTOTRONICS

09-01-12 MONDAY HEAT TRANSFER (ME, AME)

AUTOMOBILE ENGG. (24 AME)

ROBOTICS

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R05 REGULATIONS DATE OF EXAMINATION: 02-01-12 (MONDAY) THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS CE05235 ENVIRONMENTAL ENGINEERING I HS05352 MANAGEMENT SCIENCE HS05352 MANAGEMENT SCIENCE EC05342 LINEAR & DIGITAL IC APPLICATIONS CY05541 SYSTEM PROGRAMMING HS05352 MANAGEMENT SCIENCE EC05069 BASIC ELECTRONICS HS053502 MANAGEMENT SCIENCE BT05240 ENZYME ENGINEERINGTIME OF EXAMIANTION: 02.00 PM TO 05.00 PM

BRANCH

SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS CE3222 STRUCTURAL ANALYSIS II III YEAR II SEM RR EE3221 ANALYSIS OF LINEAR SYSTEMS III YEAR II SEM RR ECT3224 COMPUTER ORGANIZATION III YEAR II SEM RR CE05239 ENVIRONMENTAL STUDIES II YEAR II SEM R05 CSS3222 SOFTWARE ENGINEERING III YEAR II SEM RR ET3222 DATA & COMPUTER COMMUNICATIONS III YEAR II SEM RR MMT3221 MANAGEMENT SCIENCE III YEAR II SEM RR IC3224 MICROPROCESSORS & MICRO CONTROLLERS III YEAR II SEM RR BT3222 ANALYTICAL TECHNIQUES IN BIO TECHNOLOGY III YEAR II SEM RR

CIVIL ENGINEERING (01 CE) ELECTRICAL AND ELECTRONICS ENGINEERING (02 - EEE) ELECTRONICS CONTROL ENGINEERING (13-E Con. E) MECHANICAL ENGINEERING (MECHATRONICS) (14-MCT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15 - CSS) ELECTRONICS AND TELEMATICS ENGINEERING (17 - ETM) METALLURGY AND MATERIAL TECHNOLOGY (18 - MMT) INSTRUMENTATION AND CONTROL ENGINEERING (22 ICE) BIO-TECHNOLOGY (23 - BIO)

III YEAR B.TECH. II SEMESTER (R05)TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R05 REGULATIONS

DATE OF EXAMINATION: 04-01-12 (WEDNESDAY) THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS EC05407 MICROWAVE ENGINEERING EI05038 ANALYTICAL INSTRUMENTATION

TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM

BRANCH

SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS ET3224 ELECTRONIC MEASUREMENTS & INSTRUMENTATION III YEAR II SEM RR IC3226 COMMUNICATION SYSTEMS III YEAR II SEM RR

ELECTRONICS AND TELEMATICS ENGINEERING (17 - ETM) INSTRUMENTATION AND CONTROL ENGINEERING (22 ICE)

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R05 REGULATIONS DATE OF EXAMINATION: 10-01-12 (TUESDAY) THE SUBJECT(S) OF R05 REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF RR REGULATIONS HS05352 MANAGEMENT SCIENCE TIME OF EXAMIANTION: 10.00 AM TO 01.00 PM SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF RR REGULATIONS CS05434 OOPS THROUGH JAVA II YEAR II SEM R05 CS05434 OOPS THROUGH JAVA II YEAR II SEM R05 HS05002 ADVANCED COMMUNICAITON SKILLS IV YEAR II SEM R05

BRANCH

ELECTRICAL AND ELECTRONICS ENGINEERING (02 - EEE)

ELECTRONICS & COMMUNICATION ENGINEERING (04 ECE)

HS05352 MANAGEMENT SCIENCE

NOTE: i. ii. iii.

ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

DATE: 02-11-11

Sd/-xxxxx CONTROLLER OF EXAMINATIONS

III YEAR B.TECH. II SEMESTER (RR)

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERITY HYDERABADKUKATPALLY - HYDERABAD 500 085 EXAMINATION BRANCH

III YEAR B.TECH - II SEMESTER REVISED REGULATIONS (RR) - SUPPLEMENTARY EXAMINATIONS, DEC. JAN., 2011-2012

T I M E T A B L ETIME - 10.00 AM TO 01.00 PM DATE AND DAY BRANCH 28-12-11 WEDENSDAY 30-12-11 FRIDAY 02-01-12 MONDAY STRUCTURAL ENGINEERING, DESIGN & DRAWING-II (STEEL) 04-01-11 WEDENSDAY 06-01-12 FRIDAY ESTIMATING, QUANTITY, SURVEYING VALUATION 09-01-12 MONDAY

CIVIL ENGINEERING (01- CE)

GEOTECHNICAL ENGINEERING

STRUCTURAL ANALYSIS-II MICROPROCESSORS & INTERFACING (COMMON TO EEE, ECE, EIE, BME, E.CON.E, ETM

WATER RESOURCES ENGINEERING-II

TRANSPORT ENGINEERING

ELECTRICAL AND ELECTRONICS ENGINEERING (02 - EEE)

POWER SYSTEMS-III

ANALYSIS OF LINEAR SYSTEMS

UTILIZATION OF ELECTRICAL ENERGY

INSTRUMENTATION

MODELING OF POWER SYSTEM COMPONENTS

MECHANICAL ENGINEERING (03 - ME) ELECTRONICS & COMMUNICATIONS ENGINEERING (04 - ECE) COMPUTER SCIENCE & ENGINEERING (05 CSE)

MANAGEMENT SCIENCE (COMMON TO ME,CSE,CHEM, IT,MMT, ECC, MEP)

METROLOGY

MACHINE TOOLS

DYNAMICS OF MACHINES (COMMON TO ME, MCT, MEP, AME) DIGITAL SIGNAL PROCESSING (COMMON TO ECE, EIE, E.CON.E, ETM, ICE) ADVANCED COMPUTER ARCHITUCTURE (COMMON TO CSE, CSS, IT) MATHEMATICAL METHODS FOR CHEMICAL ENGINEERING

DESIGN OF MACHINE MEMBERS-II (COMMON TO ME, MEP)

HEAT TRANSFER (COMMON TO ME, AME)

COMUNICATION SYSTEMS

MICRO PROCESSORS & INTERFACING (COMMON TO EEE,ECE,EIE, BME,E.CON.E, ETM COMPUTER GRAPHICS

ELECTRONIC MEASUREMENTS & INSTRUMENTATION (COMMON TO ECE & ETM)

VLSI DESIGN (COMMON TO ECE & ETM) COMPUTER NETWORKS (COMMON TO CSE,CSS, IT,E.CON.E,AND ECC) PROCESS DYNAMICS & CONTROL

MICRO - WAVE ENGINEERING

MANAGEMENT SCIENCE (COMMON TO ME,CSE,CHEM, IT,MMT, ECC, MEP) MANAGEMENT SCIENCE (COMMON TO ME,CSE,CHEM, IT,MMT, ECC, MEP)

LANGUAGE PROCESSORS

ADVANCED UNIX PROGRAMMING (COMMON TO CSE,IT AND CSS)

CHEMICAL ENGINEERING (08 - CHEM)

MASS TRANSFERS OPERATION-II

CHEMICAL REACTION ENGINEERING-I

PETRO CHEMICAL ENGINEERING POLYMER ENGINEERING FERTILIZER TECHNOLOGY CONTINUED ON PAGE 2

III YEAR B.TECH. II SEMESTER (RR)PAGE-2 BRANCH

28-12-11 WEDENSDAY

30-12-11 FRIDAY MICROPROCESSORS & INTERFACING (COMMON TO EEE, ECE, EIE, BME, E.CON.E & ETM) MICROPROCESSORS & INTERFACING (COMMON TO EEE,ECE,EIE,BME,E. CON.E&ETM) VLSI SYSTEM DESIGN MICROPROCESSORS & INTERFACING (COMMON TO EEE, ECE, EIE, BME,E.CON.E, ETM MICROPROCESSORS

DATE AND DAY 02-01-12 04-01-11 MONDAY WEDENSDAY

06-01-12 FRIDAY

09-01-12 MONDAY

ELECTRONICS AND INSTRUMENTATION ENGINEERING (10 - EIE) BIO-MEDICAL ENGINEERING (11 - BME)

OPERATING SYSTEMS

BIOMEDICAL INSTRUMENTATION

DIGITAL SIGNAL PROCESSING (COMMON TO ECE, EIE, E.CON.E, ETM, ICE) BIOLOGICAL CONTROL SYSTEMS ADVANCED COMPUTER ARCHITUCTURE (COMMON TO CSE,CSS,IT) DIGITAL SIGNAL PROCESSING (COMMON TO ECE, EIE, E.CON.E, ETM,ICE) DYNAMICS OF MACHINES (COMMON TO ME, MCT, ME, AME) ADVANCED COMPUTER ARCHITUCTURE (COMMON TO CSE,CSS,IT) DIGITAL SIGNAL PROCESSING (COMMON TO ECE, EIE, E.CON.E, ETM, ICE)

COMMUNICATION ENGINEERING

OPTO - ELECTRONICS & LASER INSTRUMENTATION

BIO - MEDICAL SIGNAL PROCESSING MANAGEMENT SCIENCE (COMMON TO ME,CSE,CHEM, IT,MMT, ECC, MEP) ROBOTICS & AUTOMATION

ERGONOMICS

ADVANCED BIOMEDICAL EQUIPMENT COMPUTER NETWORKS (COMMON TO CSE,CSS, IT,E.CON.E,AND ECC) COMPUTER NETWORKS (COMMON TO CSE,CSS, IT,E.CON.E,AND ECC) ADVANCED MANUFACTURING TECHNOLOGY COMPUTER NETWORKS (COMMON TO CSE, CSS, IT, E.CON.E, AND ECC) VLSI DESIGN (COMMON TO ECE &ETM)

MEDICAL IMAGING TECHNQUES

INFORMATION TECHNOLOGY (12 - IT) ELECTRONICS AND CONTROL ENGINEERING (13 - E.CON.E) MECHATRONICS (14 - MCT) COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15 - CSS) ELECTRONICS AND TELEMATICS ENGINEERING (17 - ETM) METALLURGY AND MATERIAL TECHNOLOGY (18 - MMT)

MULTIMEDIA & WEB DESIGN

ADVANCE UNIX PROGRAMMING (COMMON TO CSE,IT AND CSS)

COMPUTER ORGANISATION

ADVANCED CONTROL SYSTEMS

INSTRUMENTATION &CONTROL SYSTEMS MATHEMATICAL MODELING & SIMULATION

PRINCIPLES OF MACHINE DESIGN SOFTWARE ENGINEERING (COMMON TO CSS & ECC) ELECTRONIC MEASUREMENTS & INSTRUMENTATION (COMMON TO ECE, ETM)

AUTOMOBILE ENGINEERING ADVANCED UNIX PROGRAMMING (COMMON TO CSE,IT AND CSS)

FAULT TOLERANT SYSTEMS MICRO PROCESSORS & INTERFACING (COMMON TO EEE,ECE,EIE, BME,E.CON.E, ETM NON FERROUS EXTRACITIVE METALURGY

TELE COMMUNICATION SWITCHING SYSTEMS & NETWORKS MANAGEMENT SCIENCE (COMMON TO ME,CSE,CHEM, IT,MMT, ECC, MEP)

DATA & COMPUTER COMMUNICATION

FOUNDARY TECHNOLOGY

IRON PRODUCTION

PLASTIC & POLYMERIC MATERIALS

MECHANICAL WORKING OF METALS

CONTINUED ON PAGE 3

III YEAR B.TECH. II SEMESTER (RR)PAGE-3 BRANCH

28-12-11 WEDENSDAY MANAGEMENT SCIENCE (COMMON TO ME,CSE,CHEM, IT,MMT, ECC, MEP) MANAGEMENT SCIENCE (COMMON TO ME,CSE,CHEM, IT,MMT, ECC, MEP) AIRCRAFT STABILITY & CONTROL

30-12-11 FRIDAY

DATE AND DAY 02-01-12 04-01-11 MONDAY WEDENSDAY

06-01-12 FRIDAY COMPUTER NETWORKS (COMMON TO CSE,CSS, IT,E.CON.E AND ECC) DESIGN OF MACHINE MEMBERS-II (COMMON TO ME AND MEP) HIGH SPEED AERO DYNAMICS MICROPRCESSORS & MICRO CONTROLLERS

09-01-12 MONDAY

ELECTRONICS AND COMPUTER ENGINEERING (19 - ECC) PRODUCTION ENGINEERING (MECHANICAL) (20 - MEP) AERONUTICAL ENGINEERING (21 - AE) INSTRUMENTATION AND CONTROL ENGINEERING (22 - ICE) BIO-TECHNOLOGY (23 - BIO) AUTOMOBILE ENGINEERING (24 - AME)

DATA BASE MANAGEMENT SYSTEMS

SOFTWARE ENGINEERING (COMMON TO CSS & ECC)

VISUAL PROGRAMMING TECHNIQUES DYNAMICS OF MACHINES (COMMON TO ME, MCT, MEP, AME) COMPUTATIONAL AERO DYNAMIC-I DIGITAL SIGNAL PROCESSING (COMMON TO ECE, EIE, E.CON.E, ETM, ICE) BIOPROCESS ENGINEERING-II DYNAMICS OF MACHINES (COMMON TO ME, MCT, MEP, AME)

ARTIFICIAL INTELLIGENCE

METAL FORMING

FOUNDARY & WELDING

TOOL DESIGN

AIRCRAFT STRUCTURES-II

AEROSPACE PROPULSION-II

ROCKET & MISSILES

POWER PLANT INSTRUMENTATION

DIGITAL & OPTICAL CONTROL SYSTEMS ANALYTICAL TECHNIQUES IN BIOTECHNOLOGY MACHINE TOOLS & METROLOGY

ROBOTIC & ENBEDDED SYSTEMS

COMMUNICATION SYSTEMS

INSTRUMENATATION & PROCESS CONTROL INDUSTRIAL MANAGEMENT

BIO INFORMATICS

IMMUNOLOGY AUTOMOTIVE ELECTICAL AND AUTOTRONICS

PROTEIN ENGINEERING HEAT TRANSFER (COMMON TO ME, AME)

ROBOTICS

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF RR REGULATIONSDATE OF EXAMINATION: 02-01-12 (MONDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM THE SUBJECT(S) OF RR REGULATIONS, ALREADY STUDIED BY THE RE-ADMITTED STUDENTS OF NR REGULATIONS SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED STUDENTS OF NR REGULATIONS ENGINEERING GEOLOGY CE 3126 OFFERED AT III B.TECH(CE) I- SEMESTER OF 20022003 REGULATIONS CONCRETE TECHNOLOGY AND PRESTRESSED CONCRETE CE 3123 OFFERED AT III B.TECH(CE) I- SEMESTER OF 20022003 REGULATIONS CONTINUED ON PAGE 4

BRANCH

CIVIL ENGINEERING (CE 01) CIVIL ENGINEERING (CE 01)

GEO TECHNICL ENGINEERING

STRUCTURAL DESIGN AND DRAWING II (STEEL)

III YEAR B.TECH. II SEMESTER (RR)PAGE-4 MECHANICAL ENGINEERING (03 - ME), MECHANICAL ENGINEERING (PRODUCTION & MECHATRONICS) (14-MCT) (20-MEP) DYNAMICS OF MACHINES INSTRUMENTATION AND CONTROL SYSTEMS ME 2225 OFFERED AT II B.TECH(MEP) II SEMESTER OF 20022003 REGULATIONS PRODUCTION PLANNING & CONTROL ME 4129 OFFERED AT II B.TECH (ME) II SEMESTER OF 20022003 REGULATIONS NON-CONVENTIONAL SOURCES OF ENERGY OFFERED AT ME 4127 AN ELECTICVE SUBJECT IN IVB.TECH I-SEMESTER ELECTIVE-IV 2002-2003 REGULATION.

MECHANICAL ENGINEERING (03 - ME) MECHANICAL ENGINEERING (03 - ME) ELECTRONICS AND COMMUNICATION ENGINEERING (04 - ECE) ECE(04), EIE(10), E.CON.E(13)

DYNAMICS OF MACHINERY

DYNAMICS OF MACHINERY

ELECTRONIC MEASUREMENTS & INSTRUMENTATION

ELECTRONIC MEASUREMENTS AND INSTRUMENTATION

ECE (04), EIE(10), E.CON.E(13), BME(11) ELECTRONICS & COMMUNICATIONS ENGINEERING (04 - ECE) ELECTRONICS & COMMUNICATIONS ENGINEERING (04 - ECE) ELECTRONICS & COMMUNICATIONS ENGINEERING (04 - ECE) ELECTRONICS AND COMMUNICATION ENGINEERING (04 - ECE) CHEMICAL ENGINEERING (08 - CHEM) BIO-MEDICALENGINEERING (11 - BME) MECHANICAL ENGINEERING (MECHATRONICS - 14-MCT) NOTE: i. ii. iii.

ELECTRONIC MEASUREMENTS AND INSTRUMENTATION

ELECTRONIC MEASUREMENTS AND INSTRUMENTATION

ELECTRONIC MEASUREMENTS AND INSTRUMENTATION

ELECTRONIC MEASUREMENTS AND INSTRUMENTATION

ELECTRONIC MEASUREMENTS & INSTRUMENTATION

PETRO-CHEMICAL ENGINEERING

BIOLOGICAL CONTROL SYSTEMS

DYNAMICS OF MACHINES

COMMUNICATION THEORY EC2226 OFFERED AT II B.TECH(ECE) II SEMESTER OF 20022003 REGULATIONS DATABASEMANAGEMENT SYSTEM EC4203 OFFERED AT IV-B.TECH (ECE) II-SEMESTER ELECTIVE-IV OF 1999-2000 REGULATIONS. ARTFICIAL NEURAL NETWORKS EC4125 OFFERED AT IV-B.TECH (ECE) I-SEMESTER ELECTIVE-I OF 2002-2003 REGULATIONS. ADVANCED COMPUTER ARCHITECTURE EC4128 OFFERED AT IV-B.TECH (ECE) I-SEMESTER ELECTIVE-II OF 2002-2003 REGULATIONS. SATELLITE COMMUNICATION EC4126 OFFERED AT IV-B.TECH (ECE) I-SEMESTER ELECTIVE-I OF 2002-2003 REGULATIONS. EMBEDDED SYSTEMS EC4222 OFFERED AT IV-B.TECH (ECE) II-SEMESTER ELECTIVE-III OF 2002-2003 REGULATIONS. DIGITAL IC APPLICATIONS (OFFERED AT III B.TECH, (ECE) I SEMESTER OF 2002-2003 REGUATIONS) FERTILIZER TECHNOLOGY CH3228 OFFERED AT III-B.TECH (CHE) II SEMESTER ELECTIVE-IV OF 2002-2003 REGULATIONS. RA-320807 BIO-FLUIDS AND MECHANICS BM 3125 OFFERED AT III B.TECH(BME) I SEMESTER OF 2002-2003 REGULATIONS MANAGEMENT SCIENCE MC 3121 OFFERED AT III B.TECH(MECT) I SEMESTER OF 2002-2003 REGULATIONS

ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

DATE: 02-11-11

Sd/-xxxxx CONTROLLER OF EXAMINATIONS

Recommended

View more >