jn6100 lte & wimax indoor cpe datasheet - jaton tec · jn6100 lte & wimax indoor cpe...

JN6100 LTE & WiMAX Indoor CPE DATASHEET

Shenzhen Jaton Communications 2014

Version V1.00

Date 1/12 2014

2

Notes:

Because of the product version upgrade or other reasons, the content of the document will not be updated on a regular basis. Unless otherwise agreed, this document is used only as a guide, all statements, information and advice in this document do not constitute any express or implied guarantee.

JN6100 LTW &Wimax Indoor CPE DATASHEET

Version V1.00 Version V1.00

INDEX 1 Hardware Specifications ............................................................................................................................. 4

1.1 Basic Description ........................................................................................................................... 4 1.2 ID Design ....................................................................................................................................... 5 1.2.1 Appearance Index ...................................................................................................................... 5 1.2.2 Appearance ................................................................................................................................ 5 1.3 Interface and Button ...................................................................................................................... 5 1.4 LED Indicators ............................................................................................................................... 7 1.5 RF Specifications ........................................................................................................................... 8 1.6 Environment Specifications ........................................................................................................... 9

2 Functional Specification ........................................................................................................................... 10 2.1 Software Specification ................................................................................................................. 10 2.2 Security ........................................................................................................................................ 12 2.3 System/Debug Utility ................................................................................................................... 13 2.4 VOIP Specification(Under development)..................................................................................... 13

3Appendix-Delivers ..................................................................................................................................... 15



1 Hardware Specifications

1.1 Basic Description

Spec. Description Comment LTE/Wimax BB ASIC SQN5120 Sequans LTE/Wimax RF ASIC SQN3140 Sequans

Wimax Standard Comply with Wimax 802.16-2005 and Wimax RCT/PCT

All RF specification should comply with Wimax RCT

LTE Standard Comply with 3GPP Release 8 and future release 9

All RF specification should comply with 3GPP Release 8 36.101

Host AR9341 Qualcomm Flash 32MB SPI NOR Flash

DDR Memory 64MB DDR2 SDRAM

Ethernet LAN Port Four RJ-45 port 10/100 auto-sensing，auto-MDX

Four LAN Port

Voice POTS port Two FXS RJ-11 ports Optional Feature USB Port One USB 2.0 Type A

LED Indicators Power/WiFi/Voice/Mode/Signal Strength/LAN Indicator

USIM Support 1.8V/3.0V 2FF USIM Power Switch Power switch, mini rocker switch

Reset/Reboot Button Tact switch

Touch reset functions within 1s completed; long press over 10s to restore the factory settings

WPS Button Tact switch WiFi Button Tact switch Control WiFi turn on or off

Power Supply Input ：Universal range 100~240V AC Output：12V/1.5A DC



1.2 ID Design

1.2.1 Appearance Index

Index Description Dimension 167.8（H）× 184.2(W)× 44(T)mm

Weight 310g Color White or other customization color

1.2.2 Appearance

Figure 1-1 JN6100 CPE Appearance Figure

1.3 Interface and Button



Connectors Description

Mini-PCIe Interface

Comply to mini-PCIe interface standard CEM1.2, the interface is located inside the CPE, which can be accessed in a variety of LTE module or Wimax-LTE dual-mode module or modules from other vendors

ETH RJ45 Four LAN

POTS-RJ11 2 RJ11 interface, phone / fax / POS, providing VoIP functions under conditions of software support

USB Type A Host USB 2.0 Host USIM Slot Support 1.8V/3.0V USIM

Power The Power port is where you connect the enclosed power adapter

Reset/Reboot Touch reset functions within 1s completed; long press over 10s to restore the factory settings

WPS Touch the WPS Button，WiFi successfully set WiFi Turn on or off WiFi Function


Version V1.00 Page7 o f 15

7

1.4 LED Indicators

LED Name Description Color LED

Behavior Status Indicator

PWR Power Indicator Blue OFF No Power Supply

Steady On Power On

WLAN WLAN Indicator Blue

OFF WLAN function disable

Blanking Data transmission through

WLAN Steady On WLAN function enable

WPS WiFi encryption with one button

Blue OFF WPS disable

Blanking WiFi terminal being accessing Steady On WPS Enable

Tel1～Tel2

Voice telephone interface indicator

Blue

Steady On Be connected with voice server

Blanking(2 times/sec.)

Connection has been established and is in a state with a hook or ringing voice

server Blanking(1/s

ec.) registering with the voice server

OFF Not establish a connection with

the voice server

MODE Mode Indication Blue

Steady On In LTE/Wimax network

Blanking LTE/Wimax scan, connect, complete LTE connectivity

OFF No access in LTE/Wimax

network

Signal strength indication

Blue

OFF No access in wireless network

One by one signal bar

display

Displays the current wireless network signal strength, the stronger the signal, the more

bars on.

LAN1～LAN4

ETH Indication Chartreuse

Steady On Ethernet connection is normal

Blanking Ethernet interface data being

transmitted

OFF Ethernet connection is not

established In addition, two special status indicator (Firmware upgrade and reset process) is described as

follows:



8

Status Indicator Status Description Firmware upgrade WPS + WLAN two lights flash simultaneously

Reset process Except 5 signal strength indicator, the other indicator are all on

1.5 RF Specifications

No. Feature Capability

Comments Min Typ Max Unit

1 Wimax Supported

Bands

3400MHz 3800MHz

2300MHz 2700MHz

2 TD-LTE Support

Bands

Band42/43

Band40/41

3 Wimax Channel

Band Width 5/7/10 MHz

4 TD-LTE Channel

Band Width 5/10/15/20 MHz

5 Output

Power@25℃ 25 dBm

6 Transmit Power

Dynamic Range @ LTE

63 dB

7 Wimax Standard Comply with Wimax 802.16-2005 and

Wimax RCT/PCT

All RF specification should comply with

Wimax RCT

8 LTE Standard Comply with 3GPP Release 8 and

future release 9

All RF specification should comply with

3GPP Release 8 36.101

9 Antenna Support

Frequency

3400 3800 MHz

2300 2700 MHz

10 LTE/Wimax Antenna

Gain 4 dBi

11 Wi-Fi Frequency Ch1~11

Channel 1 -2412MHz Channel 2 -2417MHz Channel 3 -2422MHz Channel 4 -2427MHz



9

Channel 5 -2432MHz Channel 6 -2437MHz Channel 7 -2442MHz Channel 8 -2447MHz Channel 9 -2452MHz

Channel 10 -2457MHz Channel 11 -2462MHz

12 Wi-Fi Channel BW 20 MHz

13 2.4G Wi-Fi Antenna Gain（2.4G Wi-Fi）

2.5

1.6 Environment Specifications

No. Feature Capability

Comments Min Type Max units

1 Operating

Temperature -10 45 ℃ <50℃ without damage

2 Storage

Temperature -20 60 ℃

3 Operating humidity 0 95 %

4 Storage humidity 0 95 %


Version V1.00 of 15

2 Functional Specification

2.1 Software Specification

Spec Description

Functions

Support 802.11 b/g/n Support FAT AP Built in mini-PCIe interface supports a variety of wireless modules Supports LTE TDD and FDD data card that supports various combinations of bands and a variety of bands Supports Wimax of 3.4GHz~3.8GHz POTS interface supports fax and POS (optional) WAN port packet forwarding capability:> 80Mbps Users can manually modify the USIM card PIN code; When the PIN verification, after the first manual check, follow-up support automatic verification; After the PIN code input reaches the maximum number of attempts, USIM card will be blocked, and support the PUK code to unlock function; Support modify the APN manually by WEB UI WEB UI support OS: Windows XP above SP3, Window 7, Vista, Linux。

USB2.0 1. Direct access the module 2. Upgrade module firmware from USB2.0 port 3. IOT test should use this port

WIFI Features

1. Users can switch WLAN function through two ways, one is touch the WLAN button, the second is Web UI. 2. Support configuration WLAN functions through Web UI, include: SSID, SSID broadcasting turn on/off, AP Isolate function, Channel, rate and mode 3. Support encryption: Un-encrypted, WEP-OPEN, WEP-SHARED, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), WPA2-PSK (AES) 4. Support WPS: Support PBC mode 5. WiFi protocol support: IEEE 802.11 b/g/n (2.401 – 2.483 GHz)


Version V1.00 of 15

Spec Description

Device Management

Device management：Support TR069 1. Supports upload / download the ACS specified file; Support download CPE configuration file; 2. Support queries following parameters: PCI / RSRP / RSRQ / SINR / Transmit power / DL Packet Error Rate (PER) / MCS Data rate in downlink and uplink / MIMO mode in progress 3. Support configure the following parameters: Wan Configuration: Operation Mode, WAN Protocol, Get IP Method, WAN IP Address, WAN IP Subnet Mask, MTU; DHCP Server Configuration: DHCP Mode, Start IP, End IP, Lease Time, Relay IP; DMZ configuration: DMZ Host; VOIP-related parameters; 4. Support remote upgrade: Support batch or for individual CPE remote version upgrade and rollback operations; 5. Support CPE version update 6. Supports debugging operations: reboot, restore factory settings, remote PING bag, burn and change ACL address 7. Support cycle monitor: According to the server instructions, periodically reporting corresponding parameters: including device performance (Data rate in downlink and uplink, DL Packet Error Rate (PER), MCS, MIMO mode, etc.) and RF parameters (PCI, RSRP, RSRQ , SINR, Transmit power, etc.)

Router Functions

1. Support Router mode and Bridge mode; 2. Users can automatically obtain IP parameters through static IP or dynamic mode (DNS) 3. Users can automatically obtain IP address through DHCP; 4. Supports user devices via a switch connected to the Internet by CPE LAN ports, maximum number of connections no less than 32; 5. Support via a router device connected to the Internet by CPE LAN ports.


Version V1.00 of 15

Spec Description

Web UI Basic Function

1. Query and display functions: A) Connection information (connection status, wireless signal strength,

network traffic statistics, connection time); B) Basic information about the device firmware;

C) Board / Device SN; D) SIM card information display such as IMEI, business IP;

E) CPE connection status and parameter display; 2. Parameter configuration features:

A) The default login address 192.168.1.1 username / password: admin / admin;

B) Support modify password after login; C) Support data and VOIP traffic display, support clear the traffic

statistics; D) Support local upgrade by Web UI; E) Support restart and restore the factory settings; support import and

export configuration files; F) Support setting WiFi, VOIP, TR069, network access parameters,

firewall, system time, Router settings, fax, etc.; G) Supports setup wizard;

2.2 Security

No. Feature Status Comments

1 User Name/Password configuration Support

2

L2/L3 Firewall -Basic firewall

- Port Forwarding -uPnP -DMZ

-Remote WAN Ping -Remote Web Access Control

Support


Version V1.00 of 15

2.3 System/Debug Utility No. Feature Status Comments

1 Software reset button Ready Reset to factory default

2 Configuration Wizard Ready

3 Time Zone Configuration Ready 80+ Countries/Cities selection

4 LED for Wimax/LTE Link

Diagnostic TBD Need further definition if needed

5 System log Ready Output system information to specified

network device

6 Dual Image-Firmware Upgrade fail protection

Ready Switchable

7 Firmware Verification Ready Use digital signature to verify the

installed firmware.

8 Multi-language Under

developing Customized

9 Diagnostic & Monitoring Ready

2.4 VOIP Specification(Under development)

N. Feature Status Comments

1

Protocol SIP v2 (RFC 3261)

（SIP：Session Initiation Protocol）

（RFC：Request For Comments ）

SDP (RFC2327) （SDP ：Session Description Protocol）

RTP/RTCP (RFC1889/RFC 1890) （RTP：Realtime Transport Protocol）

（RTCP：Realtime Transport Control Protocol）

Support 1

2

Codecs G.711

G.729 a/b Support 1

3 Echo Cancellation Support


Version V1.00 of 15

G.168

4 Caller ID Support

Caller ID is a feature that allows you to know who is

calling you before answering the phone.

5 Call Hold Support

6 Outgoing Caller ID block Support Hide caller name and number

7 Anonymous Incoming Call Rejection Support It prevents anonymous calls

from getting through

8 Call Waiting Indication (tone) Support

9 Call Transfer – Blind Support

10 Call Transfer – Consultive Support

11 Call Forwarding – Unconditional (Universal) Support

12 Call Forwarding on No Answer Support

13 Call Forwarding on Busy Support

14 Call Waiting Support

15 Cancel Call Waiting Support





20 Call Waiting Recall Support

When user have received call waiting and then hang up, the phone will play ringing tone to indicate that there is another

call on line.

21 Three-way Conference Support

Can speak to two other persons at the same time,

making a three-person conversation.

22 Dial Plan Support Support Defines the pattern that an end user can dial to create a valid

phone number. It is ordered set


Version V1.00 of 15

of regular expressions.

23 Do Not Disturb Support

24 Redial Support

25 Repeat Dialing on Busy Support

26 Automatic Call Return Support

Allows you to call back the number whose call you missed

by simply pressing some buttons.

27 G.711 fax send an receive Support

28 T.38 fax send an receive Support

29 MWI and VMWI

Support

When the user has new messages waiting for him, an audible or visible indication is

operated on the phone.

3Appendix-Delivers

Article Number Content Comments

- 1*Assembled product - 1*Ethernet cable, 1M - 1*12V/1A or 1A AC

adapter (Wall Mount) - 1*Manual

Detail Delivers need to be defined by customer agreement

jn6100 lte & wimax indoor cpe datasheet - jaton tec · jn6100 lte & wimax indoor cpe...

Documents