jd7105a base station analyzer - mini otdr, fibra ottica, … · · 2015-04-03• dtf • vswr •...

WEBSITE: www.jdsu.com/test

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS

JD7105ABase Station Analyzer

Introduction

The JD7105A is a Base Station Analyzer for installation and maintenance of modern wireless com-munication systems. It combines the functionality of spectrum analysis, interference analysis, cable and antenna analysis, power meter, and modulation analysis, including:

CDMA2000/EVDO•GSM/GPRS/EDGE•WCDMA/HSDPA•TD-SCDMA•WiMAX•

The JD7105A has been designed with a wide bandwidth analysis capability, ensuring the compat-ibility with future wideband technologies such as WiMAX. The JD7105A is the perfect field testing solution that combines portability, due to its lightweight design and battery extended operation, and performance, with its multifunction capability and high resolution display.

In addition, the JD7105A provides an Auto-Measurement test capability which dramatically increases user’s productivity.

The JD7105 is the optimal solution for installation and maintenance of wireless communications systems.

Features

Multi-function Integration

The Base Station Analyzer has integrated all the necessary functions to test and measure modern wireless commu-nication systems. Its combined functionality includes spectrum analysis, interference analysis, cable and antenna analysis, power meter, channel scanner, E1/T1 analysis and modulation analysis for CDMA2000/EVDO, GSM/GPRS/EDGE, WCDMA/HSDPA and TD-SCDMA..

Easy-to-use User Interface

A common interface through its multiple functions provides the same menu structure that is easy to learn and use. It allows a quick configuration set for complicated radio systems, making a single button action to change the instru-ment configuration.

Auto-Measurement and Error Logging

The Auto-Measurement function performs configurable test scenarios and store the results to either its internal or external memory under specified measurement conditions and schedule. This function is particularly important for effective tracking, monitoring and isolating intermittent problems.

Compact and Lightweight Design

The Base Station Analyzer is compact and portable for users to perform outdoor maintenance jobs. The built-in high capacity Li-ion battery allows jobs at remote sites without being restricted by power cords.

Easy to upgrade

The JD7105A comes with software activated options, allowing easy upgrades, and enabling users to have new options available at their site. This benefit provides the convenience of configuring the Base Station Analyzer for today’s needs and an easy upgrade path for future requirements.

The JD7105A automatically verifies the latest firmware version and performs remote download & upgrade if neces-sary when it is connected to the network. The user can also easily perform firmware upgrades using a USB memory.

2

JD7105A BASE STATION ANALYZER

The Complete Solution for BTS Maintenance

Spectrum Analyzer

100 kHz ~ 3 GHz (optional up to 3.7 GHz)

TX Analyzer

CDMA2000/EV-DO

WCDMA/HSDPA

GSM/GPRS/EDGE

TD-SCDMA

WiMAX

Antenna/Cable Analyzer

25 MHz ~ 4 GHzCable Loss•DTF•VSWR•Gain/Loss•

Interference Analyzer

100 kHz ~ 3 GHz (optional up to 3.7 GHz)

Channel Scanner

Up to 20 channels

RF Power Meter

Internal

External Power Sensors

E1/T1 Analyzer

Transmission and Receiving

ENTER Finishes an “ entry” , which is either a value or a test parameter

8.4 “ Color LCDHigh Resolution LCD Display

SOFT KEYSSelects the optionsdisplayed in thescreen

ESCCancels the inputs or moves to the previousmenuSPEAKERGenerates audio, ifenabled, for alarms andkey selectionsKNOB & UP/DOWN Moves marker positions or selects items on the table list

MODESelects Measurement modes- Spectrum Analyzer- Interference Analyzer - Tx Analyzer- Cable and Antenna Analyzer- E1/T1 Analyzer- Channel Scanner- Power Meter

AMPLITUDESets Scale, Reference Level, Attenuation

TRACE Captures up to 6tracesAssign s saved trace to Trace CHSelects Active trace

MARKERSupports six markers for each trace

LOADRecalls saved traces to compare them with current or other saved traces

POWER & LEDPower ON/OFF Green LED: Power On status Red LED: External power

SYSTEMIdentifies and/or revise system information or upgrade firmware

FREQ/CHANSets Frequency and selects standard or custom frequency band

PEAK SEARCHSearches the highest peak of the Trace

DATA ENTRY KEYSInputs numeric values

SAVEMeasurement result can be saved either as graphic files or data files

MEASUREMeasures Channel Power, and Occupied Bandwidth

MEASURE SETUPMeasurement setup for Channel Power & Occupied Bandwidth

BW/AVGSets Average, RBW, and RBW/VBW

3


Main Functions

Spectrum AnalyzerThe Base Station Analyzer has a general purposed spectrum analyzer which is the most flexible test tool for RF analysis. Beyond this basic spectrum analysis functionality, a built in RF measurement application provides a one button RF measurements including:

Channel Power•Adjacent Channel Power•Spectrum Emission Mask•Occupied Bandwidth•FM/AM Audio Demodulation•

Interference Analyzer

The Base Station Analyzer has an interference analyzer function which is the most effective way to identify periodic or intermittent RF interfer-ence.

A spectrogram display allows the user to capture spectrum activity while displaying frequency, power and time information.

The signal tracking capability is particularly useful for observing sig-nal strength at a single frequency over time with an audible indication.

4


Transmission Analyzer

The modulation measurement suite of the Base Station Analyzer pro-vides not only RF parametric analysis but also modulation parametric analysis of modern wireless communication systems. Built-in wireless standard test procedures allow users to test each of the following items with a single button action.

CDMA2000 / EVDO Analyzer •– CDMA Channel Power – CDMA Adjacent Channel Power – CDMA Spectrum Emission Mask – CDMA Code Domain Power • Frequency Error • Time Offset • Wave Quality • Auto PN Search • Carrier Feed Through • Codogram • RCSI (Received Code Signal Indicator)

E• VDO Analyzer – EVDO Channel Power – EVDO Adjacent Channel Power – EVDO Spectrum Emission Mask – EVDO Power vs Time • Slot Average Power • Pilot Power • MAC Power • Traffic Power • On/Off Ratio • Idle ActivityEVDO Code Domain Power •– Frequency Error – Time Offset – Auto PN Offset Search – Rho (Pilot, MAC, Traffic) – EVM (Pilot, Mac, Traffic)' – Carrier Feed Through – Codogram – RCSI (Received Code Signal Indicator)

5


WCDMA/HSDPA Analyzer •– WCDMA Channel Power – WCDMA Channel Power – WCDMA Occupied BW – WCDMA Spurious Emission Mask – WCDMA Adjacent Channel Leakage Power Ratio (ACLR) – WCDMA Multi-ACLR – WCDMA Code Domain Power • Frequency Error • Error Vector Magnitude (EVM) • Peak Code Domain Error (PCDE) • Max Inactive Code Power • Auto Scramble Search • Carrier Feed Through • Codogram • RCSI (Received Code Signal Indicator)

GSM/GPRS/EDGE Analyzer •– GSM Channel Power – GSM Occupied BW – GSM Spurious Emission Mask – Power vs Time (Frame, Slot) • Frequency Error • Burst Power • Average Burst Power • IQ Origin Offset • TSC Code • BSIC – Constellation • Phase Error (rms) • Phase Error (peak) • Modulation Type • EVM (rms) (EDGE) • EVM (peak) (EDGE) • EVM (95th) (EDGE)

6


TD-SCDMA Analyzer •– TD-SCDMA Channel Power – TD-SCDMA Occupied BW – TD-SCDMA Spurious Emission Mask – TD-SCDMA Adjacent Channel Leakage Power Ration (ACLR) – TD-SCDMA Multi-ACLR – Power vs Time (Frame, Slot) • On/Off Ratio • DwPTS Power • UpPTS Power • Slot PAR • DwPTS Code – Code Domain Power & Error • Frequency Error • Time Offset • PCDE • EVM • Peak EVM – Constellation • Rho • RMS EVM • Peak EVM • PCDE • IQ Offset

Mobile WiMAX Analyzer •– Mobile Wimax Channel Power – Mobile Wimax Occupied BW – Mobile Wimax Spurious Emission Mask – Power vs Time • Channel Power • Preamble Power • Interval Power • DL/DL Burst Power • IQ Origin Offset • Time Offset – Constellation • Frequency Error • Relative Constellation Error (RCE) (rms) • RCE (peak) • EVM (rms) • EVM (peak) • Segment ID • Cell ID • Preamble Index – Spectral Flatness – EVM vs Subcarrier – EVM vs Symbol – Complementary Cumulative Distribution Function (CCDF)

7


Over The Air Measurements

The Base Station Analyzer provides over the air measurements for a quick performance characterization of the base station. This function is especially useful in testing cell sites which are not easily accessible.

Channel Scanner

The Base Station Analyzer has the function of measuring multiple trans-mitted signals. The Channel Scanner can measure up to 20 channels in GSM, CDMA, or WCDMA networks.

Using existing format-based or custom parameters, the user easily verify improper multi-channel power levels.

GSM Channel Scanner

The Base Station Analyzer has the function to display channel power and related information up to 128 GSM down link signals. This channel scanner can quickly identifies improper power levels that affect network performance; this can be done either over the air or directly connected to the cell site.

8


Cable and Antenna Analyzer

The Base Station Analyzer can perform also the function of an antenna and cable analyzer that measures cable loss, distance to fault (DTF) volt-age standing wave ratio (VSWR), Return Loss (RL) and insertion gain /loss.

The antenna and cable analysis functionality can characterize active and passive devices such as cables, filters, amplifiers, antennas and multiplex-ers.

In a one port measurement, users can measure feed-line cable loss, DTF location, and Antenna VSWR/RL.

And with two ports measurements users can perform gain measure-ments, insertion loss and isolation; particularly useful for filers, amplifiers, Tower Mounted Amplifiers (TMA), RF path gain, and Antenna isolation.

Power Meter

The Base Station Analyzer can perform two power testing methodologies:

Internal, for standard power measurements without the assistance of •external power sensors.External, for high accuracy power measurements with the assistance •of external power sensors.

The internal power meter with no additional power sensors uses the spectrum analyzer functionality. It is a simple test methodology with reasonable accuracy. On the other hand, external power sensors perform power measurements more accurately.

The Base station Analyzer can be equipped with a Terminating Power Sensor or with a Directional Power Sensor (through-line) which has the advantage to minimize service disruption and covers an ultra-wide power range.

Power displays in either dBm or Watts.•Upper/limit can be set during pass/fail measurements.•

9


E1/T1 Analyzer

The Base Station Analyzer provides a testing solution for E1/T1 transmis-sion lines. Various test modes are available for the user, including:

Mode: Term, Monitor, Bridge, Loop•Frame: PCM30, PCM31, Unframed•Code: AMI, HDB3, B8ZS•TX Pattern: 1-8, 1-16, ALL0, ALL1, 0101, 2E20•Alarm, Error Count and Logging•

Auto-Measure

The Auto-Measure function provides an easily set up for testing, includ-ing the programming of measurement schedules such as starting time, duration; intervals and measurement parameters.

Based on the user defined conditions, the Base Station Analyzer performs the tests and automatically stores the results.

10Specifications


Standard

Frequency accuracy ± 0.05 ppm internal

Frequency aging ± 0.5 ppm / yearDisplay 8.4”TFT LCD (800 x 600 mode)

Frequency and Time Reference

Even second TTL10 MHz,13 MHz,15 MHz -10 ~ +10 dBm

Spectrum Analyzer

Input frequency range 100 kHz ~ 3 GHzMaximum input level +30 dBm (1 W)Amplitude accuracy ± 1.0 dBResolution bandwidth 10 Hz ~ 3 MHz (1-3 sequence)Video bandwidth 1 Hz ~ 3 MHz (1-3 sequence)Dynamic range > 85 dBInput attenuation 0 ~ 55 dB (step 5 dB)SSB phase noise -95 dBc @ 30 kHz offset

-105 dBc @100 kHz offsetDANL Typical -140 dBm@100 Hz RBW

with preamp onFrequency Typical Max10 MHz ~ 1 GHz -140 dBm -142 dBm1 GHz ~ 2 GHz -138 dBm -140 dBm2 GHz ~ 3 GHz -138 dBm -138 dBm

Measurement range DANL ~ +30 dBmRF in VSWR <1.5

Power Meter

Frequency range 100 kHz ~ 3 GHzDisplay ± 100 dBm (user settable)Measurement range -70 dBm ~ +30 dBmOffset range 0 ~ 60 dBAccuracy - 40 dBm ≤ Power ≤ +30 dBm ± 1.0 dB

-70 dBm ≤ Power < - 40 dBm ± 1.5 dBVSWR < 1.5Maximum power +30 dBm(1 W) without external attenuator

Cable and Antenna Analyzer

Max input power (RF out) +25 dBm, ± 50 VDCFrequency range 25 MHz ~ 4 GHzFrequency resolution 100 kHzData points 126, 251, 501, 1001Measurement speed 1, 1.3, 2.5, 5 s for each data pointOne port power 0 dBm (nominal)Corrected directivity 40 dB (typical)1 port accuracy ≤ ± (0.8 + |20 log (1 + 10-EP/20)|) dB (typ.)

EP = directivity-measured return lossImmunity to interference On frequency: +5 dBm

On channel: +17 dBm

VSWRRange 1 ~ 65Resolution 0.01

Return lossRange 0 ~ 60 dBResolution 0.01 dB

DTFVertical range VSWR: 1 ~ 65

Return loss: 0 ~ 60 dBVertical resolution 0.01Distance 0 ~ 1250 m (4125 ft)Horizontal range 0 to (# of data points-1) x horizontal resolutionHorizontal resolution (1.5 x 108) (Vp)/(delta) x 0.95

Vp: Cable's relative propagation velocityDelta[Hz] = stop freq – start freq

Cable LossRange 0 ~ 30 dBResolution 0.01 dB

Gain/Loss MeasurementFrequency range 25 MHz ~ 3 GHzFrequency resolution 100 kHzOutput power level -30 dBm or 0 dBm (nominal)Dynamic range -80 ~ +60 dB

Channel Scanner

Frequency range 100 kHz ~ 3 GHzFrequency accuracy ±10 Hz + ref freq/time accuracyMeasurement range -110 ~ +20 dBmChannel power accuracy ±1.0 dB

CDMA TX Analyzer

Frequency range 410 MHz ~ 495 MHz, 805 MHz ~ 940 MHz 1750 MHz ~ 2170 MHz

Frequency accuracy ±10 Hz + Ref Freq/Time AccuracyWaveform quality (ρ) ± 0.005 for 0.9 < ρ < 1Pilot time alignment (Tau) ± 0.5 μsCode domain power ± 0.5 dB relative power

± 1.5 dB absolute powerPilot power ± 1.0dBChannel power ± 1.0dB

11Specifications


EVDO TX AnalyzerFrequency range 410 MHz ~ 495 MHz, 805 MHz ~ 940 MHz

1750 MHz ~ 2170 MHzFrequency accuracy ±10 Hz + Ref freq/time accuracyWaveform quality (ρ) ±0.005 for 0.9 < ρ < 1Pilot time alignment (Tau) ± 0.5 μsCode domain power ± 0.5 dB relative power

± 1.5 dB absolute powerPilot power ± 1.0 dBChannel power ± 1.0 dB

WCDMA/HSDPA TX Analyzer

Frequency range 869 MHz ~ 894 MHz, 1710 MHz ~ 2170 MHzFrequency accuracy ±10 Hz + Ref Freq/Time AccuracyEVM accuracy ± 2.0% for 2% < EVM < 20%Residual EVM 3.0% typicalCode domain power ± 0.5 % for code channel power > -27 dB

16, 32, 64 DCPH (test mode 1)16, 32 DCPH (test mode 2, 3)

CPICH accuracy ± 1.0 dBmChannel power ± 0.7 dB (typical)Occupied bandwidth ± 100 kHzResidual ACLR < -58 dB @5 MHz, < -60 dB @ 10 MHzACLR accuracy ± 0.7 dB

GSM / GPRS / EDGE TX Analyzer

Frequency range 450 MHz ~ 500 MHz, 820 MHz ~ 965 MHz1750 MHz ~ 1995 MHz

Frequency accuracy ± 10 Hz + ref freq/time accuracyGSMK modulation quality(RMS phase) ± 0.5 degResidual error (GSMK) 0.5 deg8PSK modulation quality EVM ± 1.5% Residual error (8PSK) 2.50%Burst power ± 1.0 dB

GSM Channel Scanner

Frequency range 450 MHz ~ 500 MHz, 820 MHz ~ 965 MHz1705 MHz ~ 1995 MHz

Frequency accuracy ± 10 Hz + Ref Freq/Time AccuracyMeasurement range -110 ~ +20 dBmPower accuracy ± 1.0 dB

TD-SCDMA TX Analyzer

Frequency range 1880 ~ 1920 MHz, 2010 ~ 2025 MHzFrequency error ± 10 Hz + Ref Freq/Time AccuracyResidual EVM (rms) 2.0% typical for P-CCPCH slot & 1 channel,

slot power > -50 dBmTime error (Tau) ± 0.2 µs

Supported modulation QPSK/8PSKSpread factor Auto 1, 2 , 4, 8, 16Channel power (RRC) ± 1 dB typical for +10 dBm to -40 dBm

± 1.5 dB max.

Wimax AnalyzerFrequency range 100 MHz ~ 3.7 GHzChannel power ± 0.1 dB typical for + 20 dBm to -50 dBm

(± 1.5 max)Frequency error ± 40 Hz + Time base errorResidual EVM (rms) 2.0% typical for +20 dBm to -50 dBm

T1 Analyzer

Error detect code BPV, frame, CRCAlarm detection Red alarm, yellow alarm, AIS alarmReceive level +6 ~ -36 dB DSX

Electrical InterfaceConnectors RX/TX RJ48C (100 Ω)Output 0 dB, -7.5 dB and -15 dBLine code AMI, B8ZSImpedance 100 Ω or 1000 Ω (bridge)

InputTerm/bridge/monitor 0 ~ -20 dB

Transmitter and ReceiverFraming D4, ESFChannel formats Full T1Test pattern 1-8, 1-16, ALL1, ALL0, 0101

3E-24, QRSS, 2E-23, 2E-152E-23 inverse, 2E-15 inverse

Additional FunctionsReference clock Received or internalEvent log capability Internal memory or external USBError insertion 1, 1E-3, 1E-4, 1E-5Alarm insertion AIS, RAIError/alarm count Bit RAI, AIS, BPV, BERLoopback modes Self, CSU, NIU, line, networkRX level measurement Vp-p, dBdsx

E1 Analyzer

Electrical InterfaceConnectors RX/TX RJ48C (120 Ω)Output 0 dB, -6 dB (ITU-T Rec.G.703)Line code AMI, HDB3Impedance Term, monitor 120 Ω, bridge > 1000 Ω

InputTerm/bridge/monitor 0 ~ -20 dB

12Specifications


Transmitter and ReceiverFraming PCM-30, PCM-30 with CRC

PCM-31, PCM-31 with CRCChannel formats Full T1Test pattern 1-4, 1-8, ALL1, ALL0, 0101

Additional FunctionsReference clock Received or internalEvent log capability Internal memory or external USBError insertion 1, 1E-3, 1E-4, 1E-5Error rate count CRC, frame, code, bit

High Accuracy Power Meter(Requires optional directional/terminating Power Sensor)

Display range -80 ~ +120 dBmOffset range 0 ~ 60 dBResolution 0.01 dB or 0.1x W

Directional Power Sensors (optional)JD731A

Sensor type Average and peakFrequency range 300 ~ 3800 MHzPower range Average: 0.15 ~ 150 W (21.76 ~ 51.76 dBm)

Peak: 4 ~ 400 W (36.02 ~ 56.02 dBm)Measurement uncertainty ± 4% of reading + 0.05 W1, 2

Input return loss ≤ 2500 MHz, 27 dB min>2500 MHz, 25 dB

Directivity 27 dB minInsertion loss <1 GHz, <0.05 dB

1 ~ 2 GHz, <0.1 dB2 ~ 3.8 GHz, <0.13 dB

Connector type N-female on both ends

JD733ASensor type Average and peakFrequency range 150 ~ 3500 MHzPower range Average: 0.25 ~ 20 W (24 ~ 43 dBm)

Peak: 0.25 ~ 20 W (24 ~ 43 dBm)Measurement uncertainty ± 4% of reading + 0.05 W1, 2

Input return loss ≤ 2500 MHz, 27 dB min>2500 MHz, 25 dB

Directivity 27 dB minInsertion loss <1 GHz, <0.05 dB

1 ~ 2 GHz, <0.1 dB2 ~ 3.5 GHz, <0.13 dB

Connector type N-female on both ends

Terminating Power Sensors (optional)

JD732A, JD734A, JD736A

Sensor type Average (JD723A)Peak (JD734A)

Average and Peak (JD736A)

Frequency range 20 MHz ~ 3800 MHzPower range -30 ~ +20 dBm (1 µW ~ 100 mW) Measurement uncertainty ± 7% of reading1, 2

Connector type N-Male

External Reference Clock

10, 13, 15 MHz external referenceInput power -10 ~ +10 dBmConnector type SMA

Even secondInput level TTL compatibleConnector type SMA

Environmental Condition

Operating temperature -5°C ~ 50°C (23°F ~ 122°F)Storage temperature -20°C~ 70°C (-4°F ~ 158°F)Calibration cycle 1 year

Dimension

Weight 5.6 kg (12.1 lbs) (including battery)Size (W x H x D) 315 x 245 x 95 mm (12.4" x 9.6" x 3.7")

General

Interface portsSerial 1 PortUSB 1.1 1 Port10 Mbps LAN 1 PortGPS Antenna (SMA) 1 PortBuilt-in Speaker

Battery (Lithium Ion)Nominal voltage 10.8 VNormal capacity 6840 mAMaximum charge voltage 12.6 VBattery running time 1.5 hours at full charge

Power SupplyAC input 100 ~ 240 V, 2.5 A, 50 ~ 60 Hz

Specifications and product description subject to change without notice

1 Specification is provided at a temperature 25°C + 10°C

2 CW condition

Test & Measurement Regional Sales

NORTH AMERICATEL: +1 866 228 3762FAX: +1 301 353 9216

LATIN AMERICATEL: +1 954 688-5660FAX: +1 954 3454668

ASIA PACIFICTEL: +852 2892 0990FAX: +852 2892 0770

EMEATEL: +49 7121 86 2222FAX: +49 7121 86 1222

www.jdsu.com/test


Product specifications and descriptions in this document subject to change without notice. © 2009 JDS Uniphase Corporation 30149230 007 1009 JD7105ABS.DS.CPO.TM.AE

Ordering InformationMainframe

JD7105A Base Station Analyzer incl. Spectrum Analyzer and Power Meter

Options

JD7105A001 Frequency Extension up to 3.7 GHzJD7105A002 E1 Analyzer (Requires adapters G710050317, 50318

or 50319)JD7105A003 Gain/Loss Measurement (requires option 007)JD7105A004 GPS Receiver and AntennaJD7105A005 T1 Analyzer (requires adapters G710050317, 50318

or 50319)JD7105A006 Channel ScannerJD7105A007 Cable and Antenna Analyzer

(recommend calibration kits JD72450509 or 50510)JD7105A008 Interference Analyzer (recommended antennas

G700050351~5 and/or G700050361~3)JD7105A009 GSM Channel ScannerJD7105A010 CDMA2000 OTA (requires options JD7105A004 and

JD7105A020)JD7105A011 WCDMA OTA (requires options JD7105A004 and

JD7105A030) JD7105A012 GSM/GPRS/EDGE OTA (requires options JD7105A004,

JD7105A040, and 041)JD7105A013 TD-SCDMA OTA (requires options JD7105A004 and

JD7105A047)JD7105A020 CDMA AnalyzerJD7105A021 EVDO Analyzer (requires option JD7105A020)JD7105A030 WCDMA AnalyzerJD7105A031 HSDPA Analyzer (requires optionJD7105A 030)JD7105A040 GSM/GPRS Analyzer (recommended option

JD7105A009)JD7105A041 EDGE Analyzer (requires option JD7105A040)JD7105A045 Mobile WiMAX analyzer (7MHz, 8.75MHz, 10MHz)JD7105A047 TD-SCDMA Analyzer(1) Required for interference and OTA measurement (option 008 and 010, 011, 012, 013)(2) Required for E1/T1 Analyzer (option 002 or 005)

Standard Accessories

Soft Carrying CaseAC-DC AdapterCross LAN Cable (1.5 m)1GB USB MemoryLithium-ion batteryStylus PenUser’s manual and application software CD2 years warranty

Optional Accessories

JD72450509 Calibration kit 40 dB, 4 GHz, 50 Ω, N(m) TypeJD72450510 Calibration kit 40dB, 4 GHz, 50 Ω DIN(m) TypeG700050351 400 ~ 450 MHz Omni RF Antenna1

G700050352 450 ~ 500 MHz Omni RF Antenna1




G700050361 806 ~ 866 MHz Yaggi RF Antenna1



G710050317 RJ45 to Y Bantam Cable2

G710050318 RJ45 to Y BNC Cable2

G710050319 RJ45 to 4 Alligator Clips2

G710050581 Attenuator 40 dB, 100 W, DC to 4 GHz (unidirectional)G700050571 Adapter N(m) to DIN(f ), DC to 4 GHz, 50 ΩG700050572 Adapter DIN(m) to DIN(m), DC to 4 GHz, 50 ΩG700050573 Adapter N(m) to SMA(f ), DC to 18 GHz, 50 ΩG700050574 Adapter N(m) to BNC(f ), DC to 1.5 GHz, 50 ΩG710550342 Hard CaseG710550362 User's Printed ManualGC71056000 Warranty Extension of 1 year for Asia, North AmericaGC71056001 Warranty Extension of 1 year for Latin America, EMEA

1Needs for Interference and OTA Measurement ( Option JD7105A008 and JD7105A010,011,012,013)2Needs for E1/T1 Analyzer ( Option JD7105A002 or JD7105A005)

High Accuracy Power Sensors

JD731A Directional Power Sensor (300 ~ 3800 MHz, Average Power 0.15 ~ 150 W, Peak Power 4 ~ 400 W)

JD733A Directional Power Sensor (150 ~ 3500 MHz Average/Peak 0.25 ~ 20 W)

JD732A Terminating Average Power Sensor (20 ~ 3800 MHz, -30 ~ +20 dBm)

JD734A Terminating Peak Power Sensor (20 ~ 3800 MHz, -30 ~ +20 dBm)

JD736A Terminating Dual Mode (Average/Peak) Power Sensor (20 ~ 3800 MHz, -30 ~ +20 dBm)

jd7105a base station analyzer - mini otdr, fibra ottica, … · · 2015-04-03• dtf • vswr •...

Documents