jb prince ice carving catalog

8/12/2019 JB Prince Ice Carving Catalog

1/434 212-683-3553 800-473-0577 fax: 212-683-4488

All measurements are in inches unless otherwise indicatedice carving

MAKITA 1/4" Die GrinderIdeal for detail work on large or small carvings. 110 volt, 2amp motor runs at 25,000 RPM. Accepts most bits andaccessories. UL approved.

C560

MAKITA Heat GunPerfect for glossing, rounding, smoothing orrepairing. Variable temperature control from250 to 1,100. Two speed blower. UL approved.

C570

MAKITA Electric Chain SawIts high speed motor and lightweight, compact design make itpreferred among carvers. 12" bar, 110 volt, 11.5 amp motor.Super high speed (5,500 ft/min). UL approved.

C555 Chain SawC555-12 Chain Saw Kit includes extra chain and guide bar(without tip protector).

PartsC555-A 45 drive link chain.C555-B 12" guide bar (without tip protector).

MAKITA Power ToolsPreferred by ice carving professionals for their high speed, efficient motors and solid construction.

MAKITA 4" Disk Grinder KitThe essential tool for shaping and finishing ice carvings. It cutsthrough ice, polishes, texturizes, or shapes. 110 volt, 11,000 rpmmotor. Length 10", weight 3.3 lbs. Double insulated. Kit includes:disk grinder, rubber mounting pad, lock nut.C585

Box of 25 Sanding DisksMade by Makita for the C585 Disk grinder. 24 grit (medium).C588

d. India Combination StoneCoarse and fine sides for sharpeningstraight and V-shape chisels. 4".C414

e. Gouge SharpenerConvex and concave sides for sharpeningand honing gouge chisels. 6" x 2".C415

f. Honing SlipFor honing inside edges of V-shapechisels. 212".C416

d e f

a bc

a. Combination StoneMedium (1000 grit) & Superfine (6000 grit)Y979

b. Finishing StoneSuperfine (6000 grit) stone on plastic,

non-skid mounting.Y981

c. Single Grit Stones800 grit is standard. Works faster than1000 grit.

Y980-800 800 gritY980-1000 1000 grit (Med.)

Y980-1200 1200 grit (Fine)

Japanese Water StonesSynthetic sharpening stones made from compacted silicates. Work with water not oil for

more efficient sharpening and less mess. 100% uniform particle size so grit can be controlled


2/4

If you dont see it here, try www.jbprince.com

L: length W: width (T: top, B: bottom) D: depth H: height C: capacity : diameter ice carviGLO-ICE Lighted Display TrayWhite base and clear or textured acrylic ice trays can support 300 lbs of ice sculp-

ture. Also for seafood or hors doeuvres display. The sealed light box contains 2 flu-

orescent bulbs and includes red, blue and amber light filters. Insulation of acrylic

tray and diffuser minimizes melting of ice. 5 ft. hose, drain plug, brass fittings and

hose clamp come with trays. Order by product numbers below.

Note: Lighted base pieces and trays are sold separately.

GLO-ICE SquareLighted base: 1912" x 1612"C536-B

Acrylic tray: 20" x 20" inside, 30" x 30" outsideC536-T clear trayC536-M textured tray

GLO-ICE RectangularLighted base: 3514" x 16"C537-B

Acrylic tray: 35" x 17" inside 4114" x 24" outsideC537-T clear tray

C537-M textured tray

GLO-ICE Extra Large (Below)Lighted base: 53" x 16".C537-Z

Acrylic tray: 60" x 17" inside,66 x 24" OutsideC537-Y clearC537-XM textured

Ice Carving Display TrayThis piece is the standard of elegance in Japan. Crafted of highly polishedstainless steel, it consists of a base with tray and drain and a woodendraining rack to elevate the sculpture. The display will support 330 lbs.26" x 17" x 6" high.C538

6 Piece German Chisel SetFinely crafted tools, well-suited for small sculptures, to produce fine detail and to workon hard-to-reach parts of a sculpture. Highly polished carbon steel with lacquered woodhandles. Made in Germany.6 tools, 912" to 12" long: 112", 78", 12" straight - 118" gouge - 34" V-shape - pointed knife.C407


3/4

36 212-683-3553 800-473-0577 fax: 212-683-4488

All measurements are in inches unless otherwise indicatedice carvingJ.B. PRINCE COMPANY Ice Carving ChiselsOur best-selling tools since 1980. Excellent quality, Japanese carbon steel blades with oak handles. Each chisel isperfectly designed to last for many years of ice carving. Order individually, or in the sets pictured on next page.

C525 214" gouge, 24" long.

C526 78" gouge, 14" long.

C527 114" V-shape, 24" long.

C528 1" V-shape, 16" long.C529 12" V-shape, 14" long.

C521 3" straight, 29" long.

C522 2" straight, 24" long.C523 123" straight, 20" long.

C524 114" straight, 14" long.

ce Carving SawsOur back saws are designed to give the carver control for making large or fine cuts. Made in Japan of stainless steel blades with hardwood handles.

C412-A Large saw, 17" blade, 28" overall.

C412-B Medium Saw, 12" blade, 21" overall.

C412-C Pistol grip saw, 10" blade, 17" overall.

Ice TongsBoston style 1412".C550

a. Ice ChipperSteel points in cast aluminum body.Wood handle. Sturdy construction.Points will not push through. 734" long.C404

b. Deluxe Ice ChipperSame as above with large hexagonalwood handle. 834" long.C404-D

a b


4/4

If you dont see it here, try www.jbprince.com

L: length W: width (T: top, B: bottom) D: depth H: height C: capacity : diameter ice carvi

The Artisan SetAn excellent set for the carver who uses mostlystraight and V-shape chisels. Included are:C521 3" straight, 29" long.C522 2" straight, 24" long.C524 114" straight, 14" long.C526 78" gouge, 14" long.C527 114" V-shape, 24" long.C528 1" V-shape, 16" long.C529 12" V-shape, 14" long.C412-C 17" saw-stainless steel.C413-C vinyl carry bag.C519

The Executive SetA fine basic set with three types of chisels for alltypes of carvings. Included are:C523 123" straight, 20" long.C524 114" straight, 14" long.C526 78" gouge, 14" long.C528 1" V-shape, 16" long.C531

Black vinyl bagAvailable separately. See price list.C413-C

J.B. PRINCE Sets The Gold Medal SetA beautifully balanced collection of 8 superb tools.Included are:C521 3" straight, 29" long.C524 114" straight, 14" long.C525 214" gouge, 24" long.C526 78" gouge, 14" long.

C527 114" V-shape, 24" long.C529 12" V-shape, 14" long.C412-A 30" saw-stainless steel.C412-C 17" saw-stainless steel.C413-C vinyl carry bag.C530

jb prince ice carving catalog

Documents