jazan - mto for steel tanks_rev-b_24!08!12_option-2

EPC- 4 of 206

JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA

EPC - 4

MTO FOR STEEL STORAGE TANKS

GENERAL NOTES & ASSUMPTIONS

1 The plate thicknesses are calculated as per Design Code API 650 11th Edition Add 3 and API 620 as specified in data sheet.

2 All spherical tanks of J-60, shell thickness are calculated as per ASME sec-VIII div-2.

3 All instrument connection nozzles are assumed as 2" size for MTO.

4 Nozzles above 10" are assumed as plate fabricated.

5 All tanks with diameter > 25m 5% margin considered on total weight .

6 All tanks with diameter < 25m, 5-10% margin considered on total weight and 2.5% margin considered for Spherical tanks.

7

8 Material supplier shall consider exact thickness specified in MTO and if order quantity is less, nearest standard thickness at higher side may be considered.

9 Aluminum Dome roof weight is not included in MTO and cost of Al Dome shall be obtained from the supplier/vendor.

10 Insulation material quantity not included.

11 All internal & external paiting quantity and cost to be considered separatly .

12Floating roof primary & secondary seals, roof deck drain, bleeder vent, flame arrester, tank mixer etc… are not included in the MTO, the same shall be considered for quote purpose.

13 Tank farm area stand alone platform and connecting platform between the tanks are not included in MTO.

14 Assumption for Platform steel weights : 250 kg/m for spiral Stair way, 50 kg/m for caged ladder, 150 kg/m for roof top platform and 175kg/m for top wind Girder walkway.

Note : Refer client response (Q&A, EPC-4, Batch-4, point 352) IFR is not required for API 620 tanks J60-D-0114, 121, 241/242, 243, 901/ 902 & 905).

Calculated shell, bottom, roof plate thickness are rounded to nearest standard plate thickness (In MTO, the thickness that are revised to standard thickness is highlighted in yellow)

EPC- 4 of 206


EPC- 4 of 206


Floating roof primary & secondary seals, roof deck drain, bleeder vent, flame arrester, tank mixer etc… are not included in the MTO, the same shall be considered for quote purpose.

EPC- 4 of 206


J60-D-0131 0132 0133 of 206


TANK TAG NO J60-D-0131/0132/0133 Tank Dia 20300 mm MDMT - 46 Deg.C

PRODUCT PROPANE CA 1.6 mm Des. Tem. 75 Deg. C

Type: SPHERICAL Specific gravity 0.5 Des. Pres. 2000 kPa

Material Take Off

S.No. Description MaterialSize (All Dim. in mm) Unit Price Total Price

RemarksWidth (mm) Thk (mm) USD USD

A Plates1 Tank Shell - Base Material A 537 Cl 1 12000 2500 74.00 58.00 3 174.00 3032.298 2 Plate for RF Pads, Manhole and 14" Nozzle A 537 Cl 1 12000 2500 74.00 1.00 3 3.00 52.281

3 Gusset Plate A 537 Cl 1 12000 2500 12.00 0.33 3 1.00 2.823

4 Base Plate A36 12000 2500 30.00 0.33 3 1.00 7.058

5 Plate for Support Pipe A 537 CL.1/CS 12000 2000 18.00 16.00 3 48.00 162.778 6 Plate for Manhole neck & Cover A 537 Cl 1 6000 2000 74.00 0.50 3 1.50 10.456

Total w.t for 3 Tanks 3267.694 Metric Tons

Note : The above indicated thicknesses are calculated as per Design Code ASME Sec VIII Div-2 Latest Edition.

Plate QTY(Nos)

No. of Tanks

No. Tanks x Plate QTY(Total Nos)

Wt. (MT)Length

(mm)

Plate 800 x 800 x 12 Thk Considered


J60-D-0131 0132 0133 of 206


TANK TAG NO J60-D-0131/0132/0133 Tank Dia 20300 mm MDMT - 46 Deg.C

PRODUCT PROPANE CA 1.6 mm Des. Tem. 75 Deg. C

Type: SPHERICAL Specific gravity 0.5 Des. Pres. 2000 kPa

Material Take Off

S.No Description Material W.t (MT) Unit W.t (kg/m) Wt. (MT)

B Structural's1 Stairways and Platform A 36 12.00 1 3 36.000

C Pipe1 2" Pipe Sch.80 A 333 Gr.6 300 - - 10.00 3 7.47 0.067 2 6" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 3 42.50 0.051 3 14" Pipe Sch.80 A 333 Gr.6 450 - - 1.00 3 158.40 0.214 4 Pipe - 4" Sch.40 for Cross Bracing A 537 CL.1/CS 12000 - - 24.00 3 72.00 62.208

D WNRF Flange + Bolts & Nuts1 2" - 300 # WNRF A 350 LF2 - - - 10 3 6.00 0.180 2 6" - 300 # WNRF A 350 LF2 - - - 1 3 25.00 0.075 3 14" - 300 # WNRF A 350 LF2 - - - 1 3 116.00 0.348

Total w.t (B+C+D) for 3 Tanks 99.143 Metric Tons

Grand total (A+B+C+D) 3 Tanks 3366.837 Metric Tons

Considering 2.5% Margin on Grand Total 3451.008 Metric Tons

Pipe Length (mm) Qty

No of tanks

J60-D-0141 0142 0143 of 206


TANK TAG NO J60-D-0141/0142/0143 Tank Dia 24200 mm MDMT

PRODUCT BUTANE CA 1.6 mm Des. Tem.

Type: SPHERE Specific gravity 0.55 Des. Pres.

Material Take Off

S.No. Description MaterialSize (All Dim. in mm) Unit Price

Width (mm) Thk (mm) USD

A Plates1 Tank Shell - Base Material A 537 Cl 1 12000 2500 45.00 80.00 3 240.00 2543.4002 Plate for RF Pads A 537 Cl 1 12000 2500 45.00 1.00 3 3.00 31.793

3 Gusset Plate A 537 Cl 1 12000 2500 12.00 0.33 3 1.00 2.823

4 Base Plate A36 12000 2500 30.00 0.33 3 1.00 7.058

5 Plate for Support pipe A 537 CL.1/CS 12000 2000 18.00 18.00 3 54.00 183.1256 Plate for Manhole A 537 Cl 1 6000 2000 45.00 0.50 3 1.50 6.359



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0141 0142 0143 of 206



PRODUCT BUTANE CA 1.6 mm Des. Tem.


Material Take Off

S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)

B Structural's1 Stairways and platform A 36 12.75 1 3 38.250

C Pipe1 2" Pipe Sch. 80 A 333 Gr.6 300 - - 10.00 3 7.47 0.0672 8" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 3 65.00 0.0783 12" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 3 132.00 0.1584 Pipe - 4" Sch.40 for Bracing A 537 CL.1/CS 12000 - - 24.00 3 72.00 62.208

D WNRF Flange + Bolts & Nuts1 2" - 300 # WNRF A 350 LF2 - - - 10 3 6.00 0.1802 8" - 300 # WNRF A 350 LF2 - - - 1 3 42.00 0.1263 12" - 300 # WNRF A 350 LF2 - - - 1 3 90.00 0.270





No of tanks

J60-D-0141 0142 0143 of 206


-6 Deg.C

75 Deg. C

1000 kPa

Material Take OffTotal Price

RemarksUSD



J60-D-0141 0142 0143 of 206


-6 Deg.C

75 Deg. C

1000 kPa

Material Take Off

J60-D-0144 of 206


TANK TAG NO J60-D-0144 Tank Dia 24400 mm MDMT

PRODUCT C3/C4/LPG CA 1.6 mm Des. Tem.

Type: SPHERE Specific gravity 0.5-0.55 Des. Pres.

Material Take Off




3 Gusset Plate A 537 Cl 1 12000 2500 12.00 1.00 1 1.00 2.826

4 Base Plate A36 12000 2500 30.00 1.00 1 1.00 7.065


Total w.t for 1 Tank 1814.763 Metric Tons


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0144 of 206





Material Take Off

J60-D-0144 of 206





Material Take Off



C Pipe1 2" Pipe Sch. 80 A 333 Gr.6 300 - - 10.00 1 7.47 0.02 2 8" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 1 65.00 0.03 3 12" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 1 132.00 0.05 4 Pipe - 4" Sch.40 for Bracing A 537 CL.1/CS 12000 - - 12.00 1 12.00 1.73


Total w.t (B+C+D) for 1 Tank 14.771 Metric Tons

Grand total (A+B+C+D) 1 Tank 1829.534 Metric Tons



No of tanks

J60-D-0144 of 206


-46 Deg.C

75 Deg. C

2000 kPa


RemarksUSD



J60-D-0144 of 206


-46 Deg.C

75 Deg. C

2000 kPa

Material Take Off

J60-D-0145 of 206



PRODUCT LPG CA 1.6 mm Des. Tem.

Type: SPHERE Specific gravity 0.461 - 0.550 Des. Pres.

Material Take Off



A Plates1 Tank Shell - Base material A 537 Cl 1 12000 2500 74.00 58.00 1 58.00 1010.766 2 Plate for RF Pads A 537 Cl 1 12000 2500 74.00 1.00 1 1.00 17.427

3 Gusset Plate A 537 Cl 1 12000 2500 12.00 1.00 1 1.00 2.826

4 Base Plate A36 12000 2500 30.00 1.00 1 1.00 7.065

5 Plate for Support pipe A 537 CL.1/CS 12000 2000 18.00 16.00 1 16.00 54.259 6 Plate for Manhole A 537 Cl 1 6000 2000 74.00 1.00 1 1.00 6.971

Total w.t for 1 Tank 1099.3 Metric Tons


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0145 of 206




Type: SPHERE Specific gravity 0.461 - 0.550 Des. Pres.

Material Take Off





Total w.t (B+C+D) for 1 Tank 13.953 Metric Tons

Grand total (A+B+C+D) 1 Tank 1113.267 Metric Tons



No of tanks

J60-D-0145 of 206


-46 Deg.C

75 Deg. C

2000 kPa


RemarksUSD



J60-D-0145 of 206


-46 Deg.C

75 Deg. C

2000 kPa

Material Take Off

J60-D-0151 to 0154 of 206


TANK TAG NO J60-D-0151/52/53/54 Tank Dia 20800 mm MDMT



Material Take Off




3 Gusset Plate A 537 Cl 1 12000 2500 12.00 0.50 4 2.00 5.652

4 Base Plate A36 12000 2500 30.00 0.50 4 2.00 14.130




Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0151 to 0154 of 206


TANK TAG NO J60-D-0151/52/53/54 Tank Dia 20800 mm MDMT



Material Take Off









No of tanks

J60-D-0151 to 0154 of 206


-46 Deg.C

75 Deg. C

2000 kPa


RemarksUSD



J60-D-0151 to 0154 of 206


-46 Deg.C

75 Deg. C

2000 kPa

Material Take Off

J55-D-0101 of 206



PRODUCT Spent caustic Tank Ht 3500 mm Des. Tem.

Type: Cone roof Specific gravity 1.2 Des. Pres.

Corrosion Allowa. 3.2 mm

MTO



A PLATES1 Tank shell 1st course (Bottom) A36 12000 2000 5.0 2.50 1 2.50 2.355 2 Tank shell 2nd course A36 12000 1500 5.0 2.50 1 2.50 1.766

3 Tank Bottom Plate A 36 12000 2500 10.0 3.00 1 3.00 7.065 4 Tank Roof Plate A 36 12000 2500 10.0 3.00 1 3.00 7.065

5 Plate for RF pad of Nozzles & Manways A 36 12000 2000 5.0 0.25 1 0.25 0.236

6 Plate for RF pad of Roof Nozzles & Manways A 36 12000 2000 5.0 0.25 1 0.25 0.236

7 Plate for Nozzle neck A 36 12000 2500 5.0 0.50 1 0.50 0.589 8 Plate for manway cover / bolting flange A 36 12000 2500 12.0 0.10 1 0.10 0.283 9 Plate for wind girder A 36 0 0 0.0 0.00 1 0.00 0.000

10 Miscellaneous - Platform & stair A 36 12000 2500 5.0 0.50 1 0.50 0.589

Total w.t (A) for 1 Tank 20.182

Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J55-D-0101 of 206



PRODUCT Spent caustic Tank Ht 3500 mm Des. Tem.




B Structurals1 Curb Angle ( 50 x 50 x 5 ) A 36 28274 1 4.10 0.12 2 Stairways and platform A 36 4 1 4.00 3 Roof structure A 36 4 1 4.00 4 Miscellaneous support 1.0

C Pipe1 2" Pipe SA106 Gr.B 10000 - - 1.00 1 7.47 0.07 2 3" Pipe SA106 Gr.B 500 - - 1.00 1 15.26 0.01 3 4" Pipe SA106 Gr.B 9000 - - 1.00 1 22.30 0.20 4 8" Pipe SA106 Gr.B 500 - - 1.00 1 64.57 0.03

D Flange1 2" Nozzle - 150 # A 105 12 1 2.30 0.03 2 3" Nozzle - 150 # A 105 2 1 3.70 0.01 3 4" Nozzle - 150 # A 105 8 1 5.90 0.05 4 6" Nozzle - 150 # A 105 1 8.60 0.00 5 8" Nozzle - 150 # A 105 1 1 13.70 0.01 6 Fittings, Bolts & Nuts A 105 1 0.25

Total w.t (B+C+D) for 1 Tank 9.78 Mt

Grand total (A+B+C+D) 1 Tank 29.96 Mt

With 10% margin 1 Tank 32.96 Mt

Pipe Lenth (mm) Qty

No of tanks

J55-D-0101 of 206


16 Deg.C

75 Deg. C

ATM kPa

MTOTotal Price

RemarksUSD

Not applicable

J55-D-0101 of 206


16 Deg.C

75 Deg. C

ATM kPa

J55-D-0201 of 206



PRODUCT Oily waste water Tank Ht 14000 mm Des. Tem.

Type: Cone roof Specific gravity 1 Des. Pres.


MTO



A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 20.00 10.00 1 10.00 47.100 2 Tank shell 2nd course A36 12000 2500 18.00 10.00 1 10.00 42.390 3 Tank shell 3rd course A36 12000 2500 14.00 10.00 1 10.00 32.970 4 Tank shell 4th course A36 12000 2500 12.00 10.00 1 10.00 28.260 5 Tank shell 5th course A36 12000 2000 8.00 10.00 1 10.00 15.072 6 Tank shell 6th course A36 12000 2000 8.00 10.00 1 10.00 15.072

7 Tank Bottom Plate A 36 12000 2500 10.00 34.00 1 34.00 80.070 8 Annular plates A 36 12000 2500 10.00 5.00 1 5.00 11.775 9 Tank Roof Plate A 36 12000 2500 10.00 38.00 1 38.00 89.490

5 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 0.50 1 0.50 2.355 6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 1 1.00 1.178 7 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 1 0.50 1.649 8 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 1 0.10 0.424 9 Plate for wind girder - 0 0 0.00 0.00 0 0.00 0.000



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J55-D-0201 of 206







B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 1 17.70 2.00 2 Stairways and platform A 36 9.15 1 9.15 3 Top wind girder / walkway A 36 1 0.00 4 Roof structure A 36 60 1 60.00 5 Miscellaneous support 3.0

C Pipe1 2" Pipe SA106 Gr.B 500 - - 1.00 1 7.47 0.00 2 3" Pipe SA106 Gr.B 500 - - 1.00 1 15.26 0.01 3 4" Pipe SA106 Gr.B 30000 - - 1.00 1 22.30 0.67 4 6" Pipe SA106 Gr.B 500 - - 1.00 1 42.50 0.02 5 8" Pipe SA106 Gr.B 500 - - 1.00 1 64.57 0.03

D Flange1 2" Nozzle - 150 # A 105 4 1 2.30 0.01 2 3" Nozzle - 150 # A 105 2 1 3.70 0.01 3 4" Nozzle - 150 # A 105 8 1 5.90 0.05 4 6" Nozzle - 150 # A 105 2 1 8.60 0.02 5 8" Nozzle - 150 # A 105 2 1 13.70 0.03 6 12" Nozzle - 150 # A 105 2 1 29.00 0.06 7 14" Nozzle - 150 # A 105 2 1 41.00 0.08 8 Fittings, Bolts & Nuts A 105 0.25




Pipe Lenth (mm) Qty

No of tanks

J55-D-0201 of 206


16 Deg.C

75 Deg. C

ATM kPa

MTOTotal Price

RemarksUSD

not applicable

J55-D-0201 of 206


16 Deg.C

75 Deg. C

ATM kPa

J55-D-0202 of 206






MTO





5 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 0.50 1 0.50 2.355 6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 1 1.00 1.178 7 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 1 0.50 1.649 8 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 1 0.10 0.424 9 Plate for wind girder A 36 12000 2500 8.00 0.00 1 0.00 0.000



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J55-D-0202 of 206







B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 1 17.70 2.002 2 Stairways and platform A 36 9.150 1 9.150 3 Top wind girder / walkway A 36 1 0.000 4 Roof structure A 36 60.000 1 60.000 5 Miscellaneous support 3.0






Pipe Lenth (mm) Qty

No of tanks

J55-D-0202 of 206






J55-D-0202 of 206


16 Deg.C

75 Deg. C

ATM kPa

MTO

Total PriceRemarks

USD

J55-D-0202 of 206


16 Deg.C

75 Deg. C

ATM kPa

J55-D-0204 of 206



PRODUCT Oily water water Tank Ht 14000 mm Des. Tem.



MTO





10 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 0.50 1 0.50 2.355 11 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 1 1.00 1.178 12 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 1 0.50 1.649 13 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 1 0.10 0.424 14 Plate for wind girder A 36 12000 2500 8.00 0.00 1 0.00 0.000 15 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J55-D-0204 of 206



PRODUCT Oily water water Tank Ht 14000 mm Des. Tem.




B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 1 17.70 2.002 2 Stairways and platform A 36 9.15 1 9.150 3 Top wind girder / walkway A 36 1 0.000 4 Roof structure A 36 60 1 60.000 5 Miscellaneous support 3.0






Pipe Lenth (mm) Qty

No of tanks

J55-D-0204 of 206


16 Deg.C

75 Deg. C

ATM kPa

MTOTotal Price

RemarksUSD

J55-D-0204 of 206


16 Deg.C

75 Deg. C

ATM kPa

J55-D-0205 of 206



PRODUCT Caustic / Sulphuric Tank Ht 4000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) A36 12000 2000 5.00 1.50 1 1.50 1.413 2 Tank shell 2nd course A36 12000 2000 5.00 1.50 1 1.50 1.413


5 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.40 1 0.40 0.471 6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.40 1 1.00 1.178 7 Plate for Nozzle neck A 36 12000 2500 5.00 0.20 1 0.20 0.236 8 Plate for manway cover / bolting flange A 36 12000 2500 12.00 0.10 1 0.10 0.283 9 Plate for wind girder A 36 12000 2500 8.00 0.50 1 0.50 0.942


Total w.t (A) for 1 Tanks 9.538

Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J55-D-0205 of 206



PRODUCT Caustic / Sulphuric Tank Ht 4000 mm Des. Tem.




B Structurals1 Curb Angle ( 50 x 50 x 5 ) A 36 12566 1 4.10 0.052 2 Stairways and platform A 36 1.0 1 1.000 3 Roof structure A 36 1.0 1 1.000 5 Miscellaneous support 1.0

C Pipe1 2" Pipe SA106 Gr.B 1000 - - 1.00 1 7.47 0.007 2 3" Pipe SA106 Gr.B 7000 1.00 1 15.26 0.107 3 4" Pipe SA106 Gr.B 2500 - - 1.00 1 22.30 0.056 4 8" Pipe SA106 Gr.B 500 - - 1.00 1 64.57 0.032

D Flange1 2" Nozzle - 150 # A 105 6 1 2.30 0.014 2 3" Nozzle - 150 # A 105 7 1 3.70 0.026 3 4" Nozzle - 150 # A 105 6 1 5.90 0.035 4 8" Nozzle - 150 # A 105 2 1 13.70 0.027 5 Fittings, Bolts & Nuts A 105 1 0.500




Pipe Lenth (mm) Qty

No of tanks

J55-D-0205 of 206


16 Deg.C

75 Deg. C

ATM kPa

MTOTotal Price

RemarksUSD

J55-D-0205 of 206


16 Deg.C

75 Deg. C

ATM kPa

J55-D-0501A&B of 206


TANK TAG NO J55-D-0501 A & B Tank Dia 5000 mm MDMT

PRODUCT Oily Sludge Tank Ht 7000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 5.00 2.00 2 4.00 4.7 2 Tank shell 2nd course A36 12000 2500 5.00 2.00 2 4.00 4.7 3 Tank shell 3rd course A36 12000 2000 5.00 2.00 2 4.00 3.8


6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 2 1.00 1.2 7 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 2 1.00 1.2 8 Plate for Nozzle neck A 36 12000 2500 5.00 0.20 2 0.40 0.47 9 Plate for manway cover / bolting flange A 36 12000 2500 14.00 0.10 2 0.20 0.66

10 Plate for wind girder A 36 12000 2500 8.00 0.00 2 0.00 0.00 11 Miscellaneous - Platform & stair A 36 12000 2500 5.00 0.50 2 1.00 1.18


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J55-D-0501A&B of 206



PRODUCT Oily Sludge Tank Ht 7000 mm Des. Tem.




B Structurals1 Curb Angle ( 50 x 50 x 5 ) A 36 15708 2 4.10 0.129 2 Stairways and platform A 36 2 2 4.000 3 Roof structure A 36 1 2 2.000 5 Miscellaneous support 1.0

C Pipe1 2" Pipe SA106 Gr.B 1200 - - 1.00 2 7.47 0.018 2 4" Pipe SA106 Gr.B 6000 - - 1.00 2 22.30 0.268 3 6" Pipe SA106 Gr.B 12500 1.00 2 42.50 1.063 4 8" Pipe SA106 Gr.B 300 - - 1.00 2 64.57 0.039


Total w.t (B+C+D) for 2 Tanks 9.324 Mt

Grand total (A+B+C+D) 2 Tanks 38.479 Mt

With 10% margin 2 Tanks 42.327 Mt

Pipe Lenth (mm) Qty

No of tanks

J55-D-0501A&B of 206


16 Deg.C

75 Deg. C

ATM kPa

MTOTotal Price

RemarksUSD

J55-D-0501A&B of 206


16 Deg.C

75 Deg. C

ATM kPa

J55-D-0502A&B of 206



PRODUCT Skimmed oil Tank Ht 6000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) A36 12000 2000 5.00 2.00 2 4.00 3.8 2 Tank shell 2nd course A36 12000 2000 5.00 2.00 2 4.00 3.8 3 Tank shell 3rd course A36 12000 2000 5.00 2.00 2 4.00 3.8


6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 2 1.00 1.2 7 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 2 1.00 1.2 8 Plate for Nozzle neck A 36 12000 2500 5.00 0.20 2 0.40 0.47 9 Plate for manway cover / bolting flange A 36 12000 2500 14.00 0.10 2 0.20 0.66

10 Plate for wind girder A 36 12000 2500 8.00 1.00 2 2.00 3.77 11 Miscellaneous - Platform & stair A 36 12000 2500 5.00 0.50 2 1.00 1.18


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J55-D-0502A&B of 206



PRODUCT Skimmed oil Tank Ht 6000 mm Des. Tem.




B Structurals1 Curb Angle ( 50 x 50 x 5 ) A 36 18850 2 4.10 0.155 2 Stairways and platform A 36 1.5 2 3.000 3 Roof structure A 36 1.0 2 2.000 5 Miscellaneous support 1.0

C Pipe1 2" Pipe SA106 Gr.B 1000 - - 1.00 2 7.47 0.015 2 3" Pipe SA106 Gr.B 300 1.00 2 15.26 0.009 3 4" Pipe SA106 Gr.B 400 - - 1.00 2 22.30 0.018 4 6" Pipe SA106 Gr.B 11200 1.00 2 42.50 0.952 5 8" Pipe SA106 Gr.B 300 - - 1.00 2 64.57 0.039

D Flange1 2" Nozzle - 150 # A 105 14 2 2.30 0.064 2 3" Nozzle - 150 # A 105 2 2 3.70 0.015 3 4" Nozzle - 150 # A 105 2 2 5.90 0.024 4 6" Nozzle - 150 # A 105 10 2 8.60 0.172 5 8" Nozzle - 150 # A 105 2 2 13.70 0.055 6 Fittings, Bolts & Nuts A 105 2 0.500




Pipe Lenth (mm) Qty

No of tanks

J55-D-0502A&B of 206


16 Deg.C

75 Deg. C

ATM kPa

MTOTotal Price

RemarksUSD

J55-D-0502A&B of 206


16 Deg.C

75 Deg. C

ATM kPa

J60-D-0111 to 113 of 206


TANK TAG NO J60-D-0111 to 0113 Tank Dia 66000 mm MDMT

PRODUCT Whole Napth Tank Ht 22000 mm Des. Tem.

Type: IFR with Alum. dome Specific gravity 0.704 Des. Pres.


MTO



A PLATES1 Tank shell 1st course (Bottom) A516 Gr70 12000 2500 36.00 18.00 3 54.00 457.812 2 Tank shell 2nd course A516 Gr70 12000 2500 30.00 18.00 3 54.00 381.510 3 Tank shell 3rd course A516 Gr70 12000 2500 25.00 18.00 3 54.00 317.925 4 Tank shell 4th course A516 Gr70 12000 2500 22.00 18.00 3 54.00 279.774 5 Tank shell 5th course A516 Gr70 12000 2500 18.00 18.00 3 54.00 228.906 6 Tank shell 6th course A 36 12000 2500 16.00 18.00 3 54.00 203.472 7 Tank shell 7th course A 36 12000 2500 10.00 18.00 3 54.00 127.170 8 Tank shell 8th course A 36 12000 2500 10.00 17.00 3 51.00 120.105 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 17.00 3 51.00 96.084

10 Tank Bottom Plate A 36 12000 2500 8.00 114.00 3 342.00 644.328 11 Annular plates A 36 12000 2500 14.00 10.00 3 30.00 98.910

12 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 36.00 1.00 3 3.00 25.434 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 3 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 3 3.00 9.891 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.15 3 0.45 2.331 16 Plate for wind girder A 36 12000 2500 6.00 3.53 3 10.59 14.964 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.533

Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0111 to 113 of 206







B Structurals1 Curb Angle (100 x 100 x 12) A 36 207345 3 17.70 11.010 2 Stairways and platform A 36 15.87 3 47.610 3 Top wind girder / walkway A 36 36.29 3 108.870 4 Roof structure A 36 0.000 5 Miscellaneous support 5.000

C Pipe1 2" Pipe SA106 GR B 120000 - - 1.00 3 7.47 2.689 2 3" Pipe SA106 GR B 600 - - 1.00 3 15.26 0.027 3 6" Pipe SA106 GR B 1000 - - 1.00 3 42.50 0.128 4 8" Pipe SA106 GR B 39000 - - 1.00 3 64.57 7.555 5 10" Pipe 225 - - 1.00 3 81.46 0.055

D Flange1 2" Nozzle - 150 # A 105 4 3 2.30 0.028 2 3" Nozzle - 150 # A 105 3 3 3.70 0.033 3 6" Nozzle - 150 # A 105 4 3 8.60 0.103 4 8" Nozzle - 150 # A 105 3 3 13.70 0.123 5 10" Nozzle - 150 # A 105 1 3 19.50 0.059 6 18" Nozzle - 150 # A 105 2 3 59.00 0.354 7 38" Nozzle - 150 # A 105 1 3 230.00 0.690 8 42" Nozzle - 150 # A 105 1 3 310.00 0.930 9 Fittings, Bolts & Nuts A 105 1 3 3.000


Grand total (A+B+C+D) 3 Tank 3,201.825 Mt

With 5% margin 3 Tank 3,361.917 Mt

Pipe Lenth (mm) Qty

No of tanks

J60-D-0111 to 113 of 206






J60-D-0111 to 113 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD

Considering Aluminium Floating

roof

J60-D-0111 to 113 of 206


16 Deg.C

75 Deg. C

3 kPa

J60-D-0122 of 206



PRODUCT Hydro. Heavy naptha Tank Ht 22000 mm Des. Tem.

Type: IFR with Aluminium dome Specific gravity 0.694 Des. Pres.


MTO



A PLATES1 Tank shell 1st course (Bottom) A 516 Gr 70 12000 2500 35.00 16.00 1 16.00 131.880 2 Tank shell 2nd course A 516 Gr 70 12000 2500 30.00 16.00 1 16.00 113.040 3 Tank shell 3rd course A 516 Gr 70 12000 2500 25.00 16.00 1 16.00 94.200 4 Tank shell 4th course A 516 Gr 70 12000 2500 22.00 16.00 1 16.00 82.896 5 Tank shell 5th course A 516 Gr 70 12000 2500 18.00 16.00 1 16.00 67.824 6 Tank shell 6th course A 36 12000 2500 16.00 16.00 1 16.00 60.288 7 Tank shell 7th course A 36 12000 2500 12.00 16.00 1 16.00 45.216 8 Tank shell 8th course A 36 12000 2500 10.00 16.00 1 16.00 37.680 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 16.00 1 16.00 30.144


12 Plate for RF pad of Nozzles & Manways A 516 Gr 70 12000 2500 35.00 1.00 1 1.00 8.243 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 1 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 6.00 10.00 1 10.00 14.130 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 1 3.00 3.533


Total w.t for 1 Tanks 906.016

Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0122 of 206



PRODUCT Hydro. Heavy naptha Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle (100 x 100 x 12) A 36 191637 1 17.70 3.392 Stairways and platform A 36 8.48 1 8.483 Top wind girder / walkway A 36 10.45 1 10.454 Roof structure A 36 0.005 Miscellaneous support 5.000

C Pipe1 2" Pipe SA106 Gr.B 112000 - - 1.00 1 7.47 0.842 3" Pipe SA106 Gr.B 200 - - 1.00 1 15.26 0.003 6" Pipe SA106 Gr.B 800 - - 1.00 1 42.50 0.034 8" Pipe SA106 Gr.B 38500 - - 1.00 1 64.57 2.495 10" Pipe SA106 Gr.B 450 - - 1.00 1 81.46 0.04

D Flange1 2" Nozzle - 150 # A 105 4 1 2.30 0.012 3" Nozzle - 150 # A 105 4 1 3.70 0.013 6" Nozzle - 150 # A 105 4 1 8.60 0.034 8" Nozzle - 150 # A 105 1 1 13.70 0.015 10" Nozzle - 150 # A 105 2 1 19.50 0.046 20" Nozzle - 150 # A 105 2 1 75.00 0.157 Fittings, Bolts & Nuts A 105 1 1 1.00




Pipe Lenth (mm) Qty

No of tanks

J60-D-0122 of 206


16 Deg.C

75 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

Considering Aluminium

Floating roof

J60-D-0122 of 206


16 Deg.C

75 Deg. C

1 kPa

J60-D-0201 of 206



PRODUCT Light Reformate Tank Ht 22000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) A 36 12000 2500 18.00 7.00 1 7.00 29.673 2 Tank shell 2nd course A 36 12000 2500 16.00 7.00 1 7.00 26.376 3 Tank shell 3rd course A 36 12000 2500 14.00 7.00 1 7.00 23.079 4 Tank shell 4th course A 36 12000 2500 12.00 7.00 1 7.00 19.782 5 Tank shell 5th course A 36 12000 2500 10.00 7.00 1 7.00 16.485 6 Tank shell 6th course A 36 12000 2500 8.00 7.00 1 7.00 13.188 7 Tank shell 7th course A 36 12000 2500 6.00 7.00 1 7.00 9.891 8 Tank shell 8th course A 36 12000 2500 6.00 7.00 1 7.00 9.891 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 7.00 1 7.00 7.913

10 Tank Bottom Plate A 36 12000 2500 8.00 18 1 18.00 33.912 11 Annular plates A 36 12000 2500 8.00 4 1 4.00 7.536

12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 18.00 1 1 1.00 4.239 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1 1 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 0.10 1 0.10 0.330 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 8.00 1.00 1 1.00 1.884 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 4.00 1 4.00 4.710



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0201 of 206



PRODUCT Light Reformate Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 81681 1 17.70 1.446 2 Stairways and platform A 36 9.58 1 9.580 3 Top wind girder / walkway A 36 14.29 1 14.290 4 Roof structure A 36 0.000 5 Miscellaneous support 2.000

C Pipe1 2" Pipe SA106 Gr.B 66000 - - 1.00 1 7.47 0.493 2 4" Pipe SA106 Gr.B 5000 - - 1.00 1 22.30 0.112 3 6" Pipe SA106 Gr.B 2000 - - 1.00 1 42.50 0.085 4 8" Pipe SA106 Gr.B 23000 - - 1.00 1 64.57 1.485

1





Pipe Lenth (mm) Qty

No of tanks

J60-D-0201 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0201 of 206


16 Deg.C

75 Deg. C

3 kPa

J60-D-0202 0203 of 206


TANK TAG NO J60-D-0202/0203 Tank Dia 36000 mm MDMT

PRODUCT HEAVY REFORMATE Tank Ht 22000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.60 12000 2500 24.00 10 2 20.00 113.040 2 Tank shell 2nd course SA 516 Gr.60 12000 2500 22.00 10 2 20.00 103.620 3 Tank shell 3rd course A 36 12000 2500 18.00 10 2 20.00 84.780 4 Tank shell 4th course A 36 12000 2500 16.00 10 2 20.00 75.360 5 Tank shell 5th course A 36 12000 2500 14.00 10 2 20.00 65.940 6 Tank shell 6th course A 36 12000 2500 10.00 10 2 20.00 47.100 7 Tank shell 7th course A 36 12000 2500 8.00 10 2 20.00 37.680 8 Tank shell 8th course A 36 12000 2500 8.00 10 2 20.00 37.680 9 Tank shell 9th course (Top) A 36 12000 2000 8.00 10 2 20.00 30.144


12 Plate for RF pad of Nozzles & Manways SA 516 Gr.60 12000 2500 24.00 1 2 2.00 11.304 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 8.00 1 2 1.00 1.884 14 Plate for Nozzle neck A 36 12000 2500 14.00 1 2 2.00 6.594 15 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.15 2 0.30 1.272 16 Plate for wind girder A 36 12000 2500 8.00 2.19 2 4.38 8.252 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 2 6.00 7.065



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0202 0203 of 206


TANK TAG NO J60-D-0202/0203 Tank Dia 36000 mm MDMT

PRODUCT HEAVY REFORMATE Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 2 17.70 4.004 2 Stairways and platform A 36 11.15 2 22.300 3 Top wind girder / walkway A 36 19.79 2 39.580 4 Roof structure - 0.000 5 Miscellaneous support 5.000


D Flange1 2" Nozzle - 150 # A 105 9 2 2.30 0.041 2 3" Nozzle - 150 # A 105 3 2 3.70 0.022 3 4" Nozzle - 150 # A 105 3 2 5.90 0.035 4 6" Nozzle - 150 # A 105 4 2 8.60 0.069 5 8" Nozzle - 150 # A 105 4 2 13.70 0.110 6 16" Nozzle - 150 # A 105 5 2 59.00 0.590 7 18" Nozzle - 150 # A 105 4 2 59.00 0.472




Pipe Lenth (mm) Qty

No of tanks

J60-D-0202 0203 of 206


16 Deg.C

75 Deg. C

1 kPa

MTOTotal Price

RemarksUSD


Floating roof

J60-D-0202 0203 of 206


16 Deg.C

75 Deg. C

1 kPa

not applicable

J60-D-0204 of 206



PRODUCT HCK medium cut Naptha Tank Ht 22000 mm Des. Tem.


Corrosion allow. 1.6 mm

MTO MTO





12 Plate for RF pad of Nozzles & Manways SA 516 Gr.60 12000 2500 25.00 1 1 1.00 5.888 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 8.00 1 1 1.00 1.884 14 Plate for Nozzle neck A 36 12000 2500 14.00 0.10 1 0.10 0.330 15 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 1 0.10 0.424 16 Plate for wind girder A 36 12000 2500 8.00 0.00 1 0.00 0.000 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 1 3.00 3.533



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0204 of 206



PRODUCT HCK medium cut Naptha Tank Ht 22000 mm Des. Tem.


Corrosion allow. 1.6 mm



C Pipe1 2" Pipe SA106 Gr. B 70000 - - 1.00 1 7.47 0.523 2 3" Pipe SA106 Gr. B 500 - - 1.00 1 15.26 0.008 3 4" Pipe SA106 Gr. B 500 - - 1.00 1 22.30 0.011 4 6" Pipe SA106 Gr. B 103000 - - 1.00 1 42.50 4.378 5 8" Pipe SA106 Gr. B 33000 - - 1.00 1 64.57 2.131 D Flange1 2" Nozzle - 150 # A 105 9 1 2.30 0.021 2 3" Nozzle - 150 # A 105 3 1 3.70 0.011 3 4" Nozzle - 150 # A 105 3 1 5.90 0.018 4 6" Nozzle - 150 # A 105 2 1 8.60 0.017 5 8" Nozzle - 150 # A 105 3 1 13.70 0.041 6 12" Nozzle - 150 # A 105 2 1 29.00 0.058 7 16" Nozzle - 150 # A 105 1 1 54.00 0.054 8 18" Nozzle - 150 # A 105 1 1 59.00 0.059




Pipe Lenth (mm) Qty

No of tanks

J60-D-0204 of 206


16 Deg.C

75 Deg. C

1 kPa

MTOTotal Price

RemarksUSD


Floating roof

J60-D-0204 of 206


16 Deg.C

75 Deg. C

1 kPa

J60-D-211& 212 of 206


TANK TAG NO J60-D-0211,0212 Tank Dia 19000 mm MDMT

PRODUCT C7+ Tank Ht 22000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 12.00 5.00 2 10.00 28.260 2 Tank shell 2nd course A36 12000 2500 12.00 5.00 2 10.00 28.260 3 Tank shell 3rd course A 36 12000 2500 10.00 5.00 2 10.00 23.550 4 Tank shell 4th course A 36 12000 2500 8.00 5.00 2 10.00 18.840 5 Tank shell 5th course A 36 12000 2500 8.00 5.00 2 10.00 18.840 6 Tank shell 6th course A 36 12000 2500 6.00 5.00 2 10.00 14.130 7 Tank shell 7th course A 36 12000 2500 6.00 5.00 2 10.00 14.130 8 Tank shell 8th course A 36 12000 2500 6.00 5.00 2 10.00 14.130 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 5.00 2 10.00 11.304


12 Plate for RF pad of Nozzles & Manways A36 12000 2500 12.00 1.00 2 2.00 5.652 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 2 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 2 2.00 6.594 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 2 0.20 1.036 16 Plate for wind girder A 36 12000 2500 6.00 2.00 2 4.00 5.652 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 2 2.00 2.355



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-211& 212 of 206








C Pipe1 2" Pipe SA106 GR B 81000 - - 1.00 2 7.47 1.210 2 3" Pipe SA106 GR B 525 - - 1.00 2 15.26 0.016 3 4" Pipe SA106 GR B 525 - - 1.00 2 22.30 0.023 4 6" Pipe SA106 GR B 400 - - 1.00 2 42.50 0.034 5 8" Pipe SA106 GR B 27000 - - 1.00 2 64.57 3.487 6 10" Pipe SA106 GR B 225 - - 1.00 2 81.46 0.037

D Flange1 2" Nozzle - 150 # A 105 4 2 2.30 0.018 2 3" Nozzle - 150 # A 105 4 2 3.70 0.030 3 4" Nozzle - 150 # A 105 3 2 5.90 0.035 4 6" Nozzle - 150 # A 105 2 2 8.60 0.034 5 8" Nozzle - 150 # A 105 1 2 13.70 0.027 6 10" Nozzle - 150 # A 105 1 2 19.50 0.039 7 12" Nozzle - 150 # A 105 1 2 29.00 0.058 8 Fittings, Bolts & Nuts A 105 1 2 2.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-211& 212 of 206


16 Deg.C

75 Deg. C

1 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-211& 212 of 206


16 Deg.C

75 Deg. C

1 kPa

J60-D-0231 & 232 of 206


TANK TAG NO J60-D-0231 / 0232 Tank Dia 21000 mm MDMT




MTO








Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0231 & 232 of 206


TANK TAG NO J60-D-0231 / 0232 Tank Dia 21000 mm MDMT






C Pipe1 2" Pipe SA106 GR B 870000 - - 1.00 2 7.47 12.998 3 4" Pipe SA106 GR B 2000 - - 1.00 2 22.30 0.089 4 6" Pipe SA106 GR B 1500 - - 1.00 2 42.50 0.128 5 8" Pipe SA106 GR B 23000 - - 1.00 2 64.57 2.970 5 10" Pipe SA106 GR B 500 - - 1.00 2 95.85 0.096

D Flange1 2" Nozzle - 150 # A 105 5 2 2.30 0.023 2 4" Nozzle - 150 # A 105 3 2 5.90 0.035 3 6" Nozzle - 150 # A 105 5 2 8.60 0.086 4 8" Nozzle - 150 # A 105 2 2 19.50 0.078 5 10" Nozzle - 150 # A 105 1 2 13.70 0.027 6 12" Nozzle - 150 # A 105 1 2 29.90 0.060 7 Fittings, Bolts & Nuts A 105 2 1.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0231 & 232 of 206


16 Deg.C

75 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

Floating roof


roof

J60-D-0231 & 232 of 206


16 Deg.C

75 Deg. C

1 kPa

J60-D-0251-0252 of 206


TANK TAG NO . J60-D-0251/0252 Tank Dia 41000 mm MDMT

PRODUCT MTBE Storage Tank Ht 22000 mm Des. Tem.

Type: IFR with Alumin. dome Specific gravity 0.736 Des. Pres.

Corrosion allowance 1.6 mm

MTO



A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.60 12000 2500 28.00 11.00 2 22.00 145.068 2 Tank shell 2nd course SA 516 Gr.60 12000 2500 25.00 11.00 2 22.00 129.525 3 Tank shell 3rd course A 36 12000 2500 20.00 11.00 2 22.00 103.620 4 Tank shell 4th course A 36 12000 2500 18.00 11.00 2 22.00 93.258 5 Tank shell 5th course A 36 12000 2500 14.00 11.00 2 22.00 72.534 6 Tank shell 6th course A 36 12000 2500 12.00 11.00 2 22.00 62.172 7 Tank shell 7th course A 36 12000 2500 8.00 11.00 2 22.00 41.448 8 Tank shell 8th course A 36 12000 2500 8.00 11.00 2 22.00 41.448 9 Tank shell 9th course (Top) A 36 12000 2000 8.00 11.00 2 22.00 33.158


12 Plate for RF pad of Nozzles & Manways SA 516 Gr.60 12000 2500 28.00 1.00 2 2.00 13.188 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 8.00 1.00 2 2.00 3.768 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 2 2.00 6.594 15 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 2 0.20 0.848 16 Plate for wind girder A 36 12000 2500 8.00 2.19 2 4.38 8.252

17 Miscellaneous - Platform & Stair A 36 12000 2500 5.00 3.00 2 6.00 7.065



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0251-0252 of 206


TANK TAG NO . J60-D-0251/0252 Tank Dia 41000 mm MDMT

PRODUCT MTBE Storage Tank Ht 22000 mm Des. Tem.





C Pipe1 2" Pipe SA106 Gr B 70000 - - 1.00 2 7.47 1.046 2 3" Pipe SA106 Gr B 500 - - 1.00 2 15.26 0.015 3 4" Pipe SA106 Gr B 500 - - 1.00 2 22.30 0.022 4 6" Pipe SA106 Gr B 106000 - - 1.00 2 42.50 9.010 5 8" Pipe SA106 Gr B 33000 - - 1.00 2 64.57 4.262

D Flange1 2" Nozzle - 150 # A 105 8 2 2.30 0.037 2 3" Nozzle - 150 # A 105 3 2 3.70 0.022 3 4" Nozzle - 150 # A 105 2 2 5.90 0.024 4 6" Nozzle - 150 # A 105 2 2 8.60 0.034 5 12" Nozzle - 150 # A 105 6 2 29.00 0.348




Pipe Lenth (mm) Qty

No of tanks

J60-D-0251-0252 of 206


16 Deg.C

75 Deg. C

1 kPa

MTO

Total PriceRemarks

USD


roof

J60-D-0251-0252 of 206


16 Deg.C

75 Deg. C

1 kPa

J60-D-0261 0262 of 206



PRODUCT HYDRO. MED.NAPHTHA Tank Ht 22000 mm Des. Tem.



MTO






Floating roof- Double deck18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0261 0262 of 206



PRODUCT HYDRO. MED.NAPHTHA Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle (100 x 100 x 12) A 36 43982 2 17.70 1.557 2 Stairways and platform A 36 7.70 2 15.400 3 Top wind girder / walkway A 36 7.70 2 15.400 4 Roof structure - 0.000 5 Miscellaneous support 5.000

C Pipe1 2" Pipe SA106 Gr.B 78000 - - 1.00 2 7.47 1.165 2 3" Pipe SA106 Gr.B 875 - - 1.00 2 15.26 0.027 3 4" Pipe SA106 Gr.B 600 - - 1.00 2 22.30 0.027 4 6" Pipe SA106 Gr.B 400 - - 1.00 2 42.50 0.034 5 8" Pipe SA106 Gr.B 26000 - - 1.00 2 64.57 3.358 6 12" Pipe SA106 Gr.B 225 - - 1.00 2 97.36 0.044

D Flange1 2" Nozzle - 150 # A 105 4 2 2.30 0.018 2 3" Nozzle - 150 # A 105 4 2 3.70 0.030 3 4" Nozzle - 150 # A 105 3 2 5.90 0.035 4 6" Nozzle - 150 # A 105 2 2 8.60 0.034 5 8" Nozzle - 150 # A 105 1 2 13.70 0.027 6 12" Nozzle - 150 # A 105 1 2 29.00 0.058 8 Fittings, Bolts & Nuts A 105 1 2 2.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0261 0262 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0261 0262 of 206


16 Deg.C

75 Deg. C

3 kPa

NA

J60-D-0301 to 0303 of 206


TANK TAG NO J60-D-0301 TO 0303 Tank Dia 65000 mm MDMT

PRODUCT 91 GASOLINE Tank Ht 22000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr. 70 12000 2500 34.00 17.33 3 52.00 416.356 2 Tank shell 2nd course SA 516 Gr. 70 12000 2500 30.00 17.33 3 52.00 367.373 3 Tank shell 3rd course SA 516 Gr. 70 12000 2500 25.00 17.33 3 52.00 306.144 4 Tank shell 4th course SA 516 Gr. 70 12000 2500 22.00 17.33 3 52.00 269.407 5 Tank shell 5th course SA 516 Gr. 70 12000 2500 18.00 17.33 3 52.00 220.424 6 Tank shell 6th course A 36 12000 2500 16.00 17.33 3 52.00 195.932 7 Tank shell 7th course A 36 12000 2500 10.00 17.33 3 52.00 122.458 8 Tank shell 8th course A 36 12000 2500 10.00 17.33 3 52.00 122.458 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 17.33 3 52.00 97.966


12 Plate for RF pad of Nozzles & Manways SA 516 Gr. 70 12000 2500 34.00 1.00 3 3.00 24.021 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 3 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 3 3.00 9.891 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 3 0.30 1.554 16 Plate for wind girder A 36 12000 2500 6.00 7.00 3 21.00 29.673 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 2.00 3 6.00 7.065



Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0301 to 0303 of 206



PRODUCT 91 GASOLINE Tank Ht 22000 mm Des. Tem.






D Flange1 2" Nozzle - 150 # A 105 5 3 2.30 0.035 2 3" Nozzle - 150 # A 105 2 3 3.70 0.022 3 6" Nozzle - 150 # A 105 4 3 8.60 0.103 4 8" Nozzle - 150 # A 105 2 3 13.70 0.082 5 10" Nozzle - 150 # A 105 2 3 19.50 0.117 7 14" Nozzle - 150 # A 105 1 3 41.00 0.123 8 18" Nozzle - 150 # A 105 1 3 59.00 0.177 9 24" Nozzle - 150 # A 105 1 3 100.00 0.300

10 38" Nozzle - 150 # A 105 1 3 230.00 0.690 11 Fittings, Bolts & Nuts A 105 1 3 3.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0301 to 0303 of 206


16 Deg.C

75 Deg. C

1 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0301 to 0303 of 206


16 Deg.C

75 Deg. C

1 kPa

NA

J60-D-0305 of 206



PRODUCT 91 GAS / 95 GASOLINE Tank Ht 22000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 34.00 18.00 1 18.00 144.126 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 30.00 18.00 1 18.00 127.170 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 25.00 18.00 1 18.00 105.975 4 Tank shell 4th course SA 516 Gr.70 12000 2500 22.00 18.00 1 18.00 93.258 5 Tank shell 5th course SA 516 Gr.70 12000 2500 18.00 18.00 1 18.00 76.302 6 Tank shell 6th course A 36 12000 2500 16.00 18.00 1 18.00 67.824 7 Tank shell 7th course A 36 12000 2500 10.00 18.00 1 18.00 42.390 8 Tank shell 8th course A 36 12000 2500 10.00 18.00 1 18.00 42.390 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 18.00 1 18.00 33.912




Total w.t for 1 Tanks 1,000.687

Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0305 of 206



PRODUCT 91 GAS / 95 GASOLINE Tank Ht 22000 mm Des. Tem.






D Flange1 2" Nozzle - 150 # A 105 5 1 2.30 0.012 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 6" Nozzle - 150 # A 105 4 1 8.60 0.034 4 8" Nozzle - 150 # A 105 2 1 13.70 0.027 5 10" Nozzle - 150 # A 105 2 1 19.50 0.039 7 14" Nozzle - 150 # A 105 1 1 41.00 0.041 8 18" Nozzle - 150 # A 105 1 1 59.00 0.059 9 24" Nozzle - 150 # A 105 1 1 100.00 0.100

10 38" Nozzle - 150 # A 105 1 1 230.00 0.230 11 Fittings, Bolts & Nuts A 105 1 1 3.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0305 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0305 of 206


16 Deg.C

75 Deg. C

3 kPa

NA

J60-D-0311-0312-0313 of 206



PRODUCT 95 Gasoline Tank Ht 22000 mm Des. Tem.

Type: IFR with Alumi. dome Specific gravity 0.757 Des. Pres.


MTO








Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0311-0312-0313 of 206



PRODUCT 95 Gasoline Tank Ht 22000 mm Des. Tem.

Type: IFR with Alumi. dome Specific gravity 0.757 Des. Pres.



B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 3 17.70 6.0052 Stairways and platform A 36 11.15 3 33.4503 Top wind girder / walkway A 36 19.79 3 59.3704 Roof structure - 0.0005 Miscellaneous support 5.000

C Pipe1 2" Pipe SA106 GR B 71000 - - 1.00 3 7.47 1.5912 3" Pipe SA106 GR B 500 - - 1.00 3 15.26 0.0233 4" Pipe SA106 GR B 500 - - 1.00 3 22.30 0.0334 6" Pipe SA106 GR B 103000 - - 1.00 3 42.50 13.1335 8" Pipe SA106 GR B 33000 - - 1.00 3 64.57 6.392

D Flange1 2" Nozzle - 150 # A 105 10 3 2.30 0.0692 3" Nozzle - 150 # A 105 3 3 3.70 0.0333 4" Nozzle - 150 # A 105 4 3 5.90 0.0714 6" Nozzle - 150 # A 105 2 3 8.60 0.0525 8" Nozzle - 150 # A 105 3 3 13.70 0.1235 12" Nozzle - 150 # A 105 2 3 29.00 0.1746 16" Nozzle - 150 # A 105 2 3 41.00 0.2467 18" Nozzle - 150 # A 105 6 3 59.00 1.0628 38" Nozzle - 150 # A 105 2 3 205.00 1.230




Pipe Lenth (mm) Qty

No of tanks

J60-D-0311-0312-0313 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0311-0312-0313 of 206


16 Deg.C

75 Deg. C

3 kPa

NA

J60-D-0401 402 & 405 of 206


TANK TAG NO J60-D-0401 , 402 & 0405 Tank Dia 29000 mm MDMT

PRODUCT Benzene Tank Ht 22000 mm Des. Tem.



MTO








Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0401 402 & 405 of 206


TANK TAG NO J60-D-0401 , 402 & 0405 Tank Dia 29000 mm MDMT







D Flange1 2" Nozzle - 150 # A 105 7 3 2.30 0.048 2 4" Nozzle - 150 # A 105 3 3 5.90 0.053 3 6" Nozzle - 150 # A 105 6 3 8.60 0.155 4 8" Nozzle - 150 # A 105 8 3 19.50 0.468 5 10" Nozzle - 150 # A 105 1 3 13.70 0.041 6 12" Nozzle - 150 # A 105 1 3 29.90 0.090 7 16" Nozzle - 150 # A 105 1 3 54.00 0.162 8 Fittings, Bolts & Nuts A 105 3 3.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0401 402 & 405 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0401 402 & 405 of 206


16 Deg.C

75 Deg. C

3 kPa

NA

J60-D-0403&0404 of 206


TANK TAG NO J60-D-0403 & 0404 Tank Dia 8000 mm MDMT


Type: IFR with Cone roof Specific gravity 0.88 Des. Pres.


MTO




10 Tank Bottom Plate A 36 12000 2500 8.00 1.50 2 3.00 5.652 11 Annular plates A 36 12000 2500 8.00 1.00 2 2.00 3.768 12 Roof plate A 36 12000 2500 8.00 1.87 2 3.74 7.046


Floating roof- Double Deck19 Plate for Deck20 Plate for Rim outside21 Plate for Rim inside22 Compartment plate23 Pontoon cover plate24 Plate for Deck structural25 Plate for foam dam rim26 Plate for foam dam chamber27 Leg wear plate28 Deck manhole29 Compartment manhole


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0403&0404 of 206


TANK TAG NO J60-D-0403 & 0404 Tank Dia 8000 mm MDMT





B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 25133 2 17.70 0.890 2 Stairways and platform A 36 2.00 2 4.000 3 Roof structure A 36 4.00 2 8.000 4 Miscellaneous support 1.500


D Flange1 2" Nozzle - 150 # A 105 9 2 2.30 0.041 2 4" Nozzle - 150 # A 105 5 2 5.90 0.059 3 6" Nozzle - 150 # A 105 3 2 8.60 0.052 4 8" Nozzle - 150 # A 105 2 2 19.50 0.078 5 12" Nozzle - 150 # A 105 1 2 29.90 0.060 6 Fittings, Bolts & Nuts A 105 2 1.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0403&0404 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0403&0404 of 206


16 Deg.C

75 Deg. C

3 kPa

J60-D-0501-0502-0505 of 206


TANK TAG NO J60-D-0501/0502 /0505 Tank Dia 41000 mm MDMT

PRODUCT Paraxylene Tank Ht 22000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.60 12000 2500 28.00 11.0 3 33.00 217.602 2 Tank shell 2nd course SA 516 Gr.60 12000 2500 25.00 11.0 3 33.00 194.288 3 Tank shell 3rd course A 36 12000 2500 20.00 11.0 3 33.00 155.430 4 Tank shell 4th course A 36 12000 2500 18.00 11.0 3 33.00 139.887 5 Tank shell 5th course A 36 12000 2500 14.00 11.0 3 33.00 108.801 6 Tank shell 6th course A 36 12000 2500 12.00 11.0 3 33.00 93.258 7 Tank shell 7th course A 36 12000 2500 8.00 11.0 3 33.00 62.172 8 Tank shell 8th course A 36 12000 2500 8.00 11.0 3 33.00 62.172 9 Tank shell 9th course (Top) A 36 12000 2000 8.00 11.0 3 33.00 49.738

10 Tank Bottom Plate A 36 12000 2500 8.00 43 3 129.00 243.036 11 Annular plates A36 12000 2500 8.00 6 3 18.00 33.912




Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0501-0502-0505 of 206








C Pipe1 2" Pipe SA106 Gr. B 71000 - - 1.00 3 7.47 1.591 2 3" Pipe SA106 Gr. B 500 - - 1.00 3 15.26 0.023 3 4" Pipe SA106 Gr. B 500 - - 1.00 3 22.30 0.033 4 6" Pipe SA106 Gr. B 63000 - - 1.00 3 42.50 8.033 5 8" Pipe SA106 Gr. B 33000 - - 1.00 3 64.57 6.392





Pipe Lenth (mm) Qty

No of tanks

J60-D-0501-0502-0505 of 206






J60-D-0501-0502-0505 of 206


16 Deg.C

93 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0501-0502-0505 of 206


16 Deg.C

93 Deg. C

3 kPa

NA

J60-D-0501-0502-0505 of 206


16 Deg.C

93 Deg. C

3 kPa

J60-D-0503 & 504 of 206


TANK TAG NO J60-D-0503 504 Tank Dia 14000 mm MDMT

PRODUCT paraxylene Tank Ht 22000 mm Des. Tem.



MTO






Floating roof - Douple Deck18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0503 & 504 of 206


TANK TAG NO J60-D-0503 504 Tank Dia 14000 mm MDMT

PRODUCT paraxylene Tank Ht 22000 mm Des. Tem.










Pipe Lenth (mm) Qty

No of tanks

J60-D-0503 & 504 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0503 & 504 of 206


16 Deg.C

75 Deg. C

3 kPa

NA

J60-D-0506 of 206



PRODUCT Off spec bene. / paraxyl Tank Ht 22000 mm Des. Tem.



MTO








Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0506 of 206



PRODUCT Off spec bene. / paraxyl Tank Ht 22000 mm Des. Tem.










Pipe Lenth (mm) Qty

No of tanks

J60-D-0506 of 206


16 Deg.C

93 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0506 of 206


16 Deg.C

93 Deg. C

3 kPa

NA

J60-D-0511 of 206



PRODUCT MIX XYLENE Tank Ht 22000 mm Des. Tem.



MTO






Floating roof - Double Deck18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0511 of 206



PRODUCT MIX XYLENE Tank Ht 22000 mm Des. Tem.










Pipe Lenth (mm) Qty

No of tanks

J60-D-0511 of 206


16 Deg.C

89 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0511 of 206


16 Deg.C

89 Deg. C

3 kPa

NA

J60-D-0513 of 206



PRODUCT Para Diethyl benzene Tank Ht 22000 mm Des. Tem.

Type: Cone roof tank Specific gravity 0.866 Des. Pres.


MTO








Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0513 of 206



PRODUCT Para Diethyl benzene Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle ( 50 x 50 x 6) A 36 40841 1 5.00 0.204 2 Stairways and platform A 36 2.00 1 2.000 3 Roof structure A 36 6.00 1 6.000 4 Miscellaneous support 2.000

C Pipe1 2" Pipe SA106 Gr.B 73000 - - 1.00 1 7.47 0.545 2 3" Pipe SA106 Gr.B 500 - - 1.00 1 15.26 0.008 3 4" Pipe SA106 Gr.B 10500 - - 1.00 1 22.30 0.234 4 6" Pipe SA106 Gr.B 3000 - - 1.00 1 42.50 0.128 5 8" Pipe SA106 Gr.B 24000 - - 1.00 1 64.57 1.550 6 10" Pipe SA106 Gr.B 500 - - 1.00 1 95.85 0.048





Pipe Lenth (mm) Qty

No of tanks

J60-D-0513 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0513 of 206


16 Deg.C

75 Deg. C

3 kPa

J60-D-0514 of 206



PRODUCT Solvent / off - paraxylene Tank Ht 22000 mm Des. Tem.



MTO








Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0514 of 206



PRODUCT Solvent / off - paraxylene Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle (50x 50 x 6) A 36 43982 1 5.00 0.220 2 Stairways and platform A 36 2.50 1 2.500 3 Roof structure A 36 6.00 1 6.000 4 Miscellaneous support 2.000


D Flange1 2" Nozzle - 150 # A 105 8 1 2.30 0.018 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 4" Nozzle - 150 # A 105 6 1 5.90 0.035 4 6" Nozzle - 150 # A 105 2 1 8.60 0.017 5 8" Nozzle - 150 # A 105 2 1 19.50 0.039 6 12" Nozzle - 150 # A 105 3 1 29.90 0.090 7 Fittings, Bolts & Nuts A 105 1.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0514 of 206


16 Deg.C

93 Deg. C

1 kPa

MTOTotal Price

RemarksUSD


roof

J60-D-0514 of 206


16 Deg.C

93 Deg. C

1 kPa

J60-D-0601 to 607 of 206



PRODUCT ULTRA SULFUR DIESEL Tank Ht 22000 mm Des. Tem.

Type: Aluminium dome Specific gravity 0.805 Des. Pres.


MTO



A PLATES1 Tank shell 1st course (Bottom) A 537 Cl 1 12000 2500 38.00 20.00 7 140.00 1252.8602 Tank shell 2nd course A 537 Cl 1 12000 2500 36.00 20.00 7 140.00 1186.9203 Tank shell 3rd course SA 516 Gr. 70 12000 2500 30.00 20.00 7 140.00 989.1004 Tank shell 4th course SA 516 Gr. 70 12000 2500 25.00 20.00 7 140.00 824.2505 Tank shell 5th course SA 516 Gr. 70 12000 2500 20.00 20.00 7 140.00 659.4006 Tank shell 6th course A 36 12000 2500 20.00 20.00 7 140.00 659.4007 Tank shell 7th course A 36 12000 2500 12.00 20.00 7 140.00 395.6408 Tank shell 8th course A 36 12000 2500 10.00 20.00 7 140.00 329.7009 Tank shell 9th course (Top) A 36 12000 2000 10.00 20.00 7 140.00 263.760

10 Tank Bottom Plate A 36 12000 2500 8.00 145.00 7 1,015.00 1912.26011 Annular plates A 36 12000 2500 15.00 12.00 7 84.00 296.730

12 Plate for RF pad of Nozzles & Manways A 537 Cl 1 12000 2500 38.00 1.00 7 7.00 62.64313 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 7 1.00 1.17814 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 7 7.00 23.07915 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 7 0.70 3.62716 Plate for wind girder A 36 12000 2500 6.00 8.00 7 56.00 79.12817 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 7 7.00 8.243


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0601 to 607 of 206



PRODUCT ULTRA SULFUR DIESEL Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle (100 x 100 x 12) A 36 235619 7 17.70 29.1932 Stairways and platform A 36 6.61 7 46.2703 Top wind girder / walkway A 36 41.23 7 288.6104 Roof structure - 0.0005 Miscellaneous support 10.000

C Pipe1 2" Pipe SA106 Gr.B 124000 - - 1.00 7 7.47 6.4842 3" Pipe SA106 Gr.B 600 - - 1.00 7 15.26 0.0643 4" Pipe SA106 Gr.B 500 - - 1.00 7 22.30 0.0784 6" Pipe SA106 Gr.B 200 - - 1.00 7 42.50 0.0605 8" Pipe SA106 Gr.B 41000 - - 1.00 7 64.57 18.5326 10" Pipe SA106 Gr.B 700 - - 1.00 7 81.46 0.399

D Flange1 2" Nozzle - 150 # A 105 6 7 2.30 0.0972 3" Nozzle - 150 # A 105 3 7 3.70 0.0783 6" Nozzle - 150 # A 105 1 7 8.60 0.0604 8" Nozzle - 150 # A 105 1 7 13.70 0.0965 10" Nozzle - 150 # A 105 3 7 19.50 0.4106 12" Nozzle - 150 # A 105 3 7 29.00 0.6097 14" Nozzle - 150 # A 105 1 7 41.00 0.2878 24" Nozzle - 150 # A 105 1 7 75.00 0.5259 34" Nozzle - 150 # A 105 1 7 205.00 1.435

10 48" Nozzle - 150 # A 105 1 7 426.00 2.98211 Fittings, Bolts & Nuts A 105 2 7 7.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0601 to 607 of 206


16 Deg.C

80 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

J60-D-0601 to 607 of 206


16 Deg.C

80 Deg. C

1 kPa

NA

J60-D-0611 to 0613 of 206



PRODUCT HIGH SULFUR DIESEL Tank Ht 22000 mm Des. Tem.



MTO







Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0611 to 0613 of 206









D Flange1 2" Nozzle - 150 # A 105 7 3 2.30 0.048 2 3" Nozzle - 150 # A 105 2 3 3.70 0.022 3 6" Nozzle - 150 # A 105 2 3 8.60 0.052 4 8" Nozzle - 150 # A 105 1 3 13.70 0.041 5 10" Nozzle - 150 # A 105 1 3 19.50 0.059 6 12" Nozzle - 150 # A 105 1 3 29.00 0.087 7 14" Nozzle - 150 # A 105 1 3 41.00 0.123 8 20" Nozzle - 150 # A 105 1 3 75.00 0.225 9 46" Nozzle - 150 # A 105 1 3 375.00 1.125

11 Fittings, Bolts & Nuts A 105 2 3 7.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0611 to 0613 of 206


16 Deg.C

76 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

J60-D-0611 to 0613 of 206


16 Deg.C

76 Deg. C

1 kPa

NA

J60-D-0614 of 206






MTO







Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0614 of 206









D Flange1 2" Nozzle - 150 # A 105 7 1 2.30 0.016 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 6" Nozzle - 150 # A 105 2 1 8.60 0.017 4 8" Nozzle - 150 # A 105 1 1 13.70 0.014 5 10" Nozzle - 150 # A 105 1 1 19.50 0.020 6 12" Nozzle - 150 # A 105 1 1 29.00 0.029 7 14" Nozzle - 150 # A 105 1 1 41.00 0.041 8 20" Nozzle - 150 # A 105 1 1 75.00 0.075 9 46" Nozzle - 150 # A 105 1 1 375.00 0.375

11 Fittings, Bolts & Nuts A 105 2 1 2.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0614 of 206


16 Deg.C

76 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

J60-D-0614 of 206


16 Deg.C

76 Deg. C

1 kPa

J60-D-0701 to 704 of 206



PRODUCT Fuel oil storage Tank Ht 22000 mm Des. Tem.

Type: Aluminium dome roof tank Specific gravity 0.917 Des. Pres.


MTO



A PLATES1 Tank shell 1st course (Bottom) A537 Cl.1 12000 2500 42.00 21.50 4 86.00 850.626 2 Tank shell 2nd course A537 Cl.1 12000 2500 38.00 21.50 4 86.00 769.614 3 Tank shell 3rd course A537 Cl.1 12000 2500 32.00 21.50 4 86.00 648.096 4 Tank shell 4th course A537 Cl.1 12000 2500 32.00 21.50 4 86.00 648.096 5 Tank shell 5th course A516Gr.70 12000 2500 32.00 21.50 4 86.00 648.096 6 Tank shell 6th course A516Gr.70 12000 2500 20.00 21.50 4 86.00 405.060 7 Tank shell 7th course A516Gr.70 12000 2500 15.00 21.50 4 86.00 303.795 8 Tank shell 8th course A 36 12000 2500 10.00 21.50 4 86.00 202.530 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 21.50 4 86.00 162.024


12 Plate for RF pad of Nozzles & Manways A537 Cl.1 12000 2500 42.00 1.00 4 4.00 39.564 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 4 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 4 4.00 13.188 15 Plate for manway cover / bolting flange A537 Cl.1 12000 2500 22.00 0.10 4 0.40 2.072 16 Plate for wind girder A 36 12000 2500 6.00 7.00 4 28.00 39.564 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 4 12.00 14.130


Plate QTY(Nos)

No. of Tanks

No. Tanks x Plate QTY(Total Nos plates)

Wt. (MT)Length

(mm)

J60-D-0701 to 704 of 206



PRODUCT Fuel oil storage Tank Ht 22000 mm Des. Tem.

Type: Aluminium dome roof tank Specific gravity 0.917 Des. Pres.



B Structurals1 Curb Angle (100 x 100 x 12) A 36 257611 4 17.70 18.2392 Stairways and platform A 36 6.61 4 26.4403 Top wind girder / walkway A 36 45.08 4 180.3204 Steel Roof structure - 0.0005 Miscellaneous support 10.000

C Pipe1 2" Pipe SA106 GR B 4730000 - - 1.00 4 7.47 141.3322 3" Pipe SA106 GR B 51000 - - 1.00 4 15.26 3.1133 4" Pipe SA106 GR B 4500 1.00 4 22.30 4 6" Pipe SA106 GR B 1000 - - 1.00 4 42.50 0.1705 8" Pipe SA106 GR B 25000 - - 1.00 4 64.57 6.4576 10" Pipe SA106 GR B 500 - - 1.00 4 81.46 0.163

D Flange1 2" Nozzle - 150 # A 105 6 4 2.30 0.0552 3" Nozzle - 150 # A 105 7 4 3.70 0.1043 6" Nozzle - 150 # A 105 3 4 8.60 0.1034 8" Nozzle - 150 # A 105 2 4 13.70 0.1105 10" Nozzle - 150 # A 105 1 4 19.50 0.0786 18" Nozzle - 150 # A 105 2 4 59.00 0.4727 42" Nozzle - 150 # A 105 1 4 375.00 1.5008 Fittings, Bolts & Nuts A 105 1 4 8.000




Pipe Lenth (mm) Qty

No of tanks

J60-D-0701 to 704 of 206


16 Deg.C

120 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

J60-D-0701 to 704 of 206


16 Deg.C

120 Deg. C

1 kPa

NA

J60-D-0711 of 206



PRODUCT Black oil Tank Ht 22000 mm Des. Tem.

Type: Dome roof Specific gravity 1.031 Des. Pres.


MTO





12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 1 1 1.00 4.710 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1 1 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 26.00 0.20 1 0.20 1.225 16 Plate for wind girder A 36 12000 2500 8.00 1.00 1 1.00 1.884 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 1 3.00 3.533

18 Plate for clean out door A36 12000 2500 36.00 0.20 1 0.20 1.696 19 Roof plate A36 12000 2500 8.00 29.00 1 29.00 54.636


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0711 of 206







B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 72257 1 17.70 1.279 2 Stairways and platform A 36 9.11 1 9.110 3 Top wind girder / walkway A 36 12.64 1 12.640 4 steel Roof structure - 0 0.000 5 Miscellaneous support 3.000 6 Insulation cleats A 36 1 1 1.000






Pipe Lenth (mm) Qty

No of tanks

J60-D-0711 of 206


16 Deg.C

250 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

J60-D-0711 of 206


16 Deg.C

250 Deg. C

1 kPa

NA

Heating coil

J60-D-0721 to 723 of 206



PRODUCT VGO Storage Tank Ht 22000 mm Des. Tem.

Type: Alumin. dome roof tank Specific gravity 0.895 Des. Pres.


MTO





12 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 10.00 1.00 3 3.00 7.1 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 3 1.00 1.2 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 3 3.00 9.89 15 Plate for manway cover / bolting flange SA 516 Gr.70 12000 2500 22.00 0.10 3 0.30 1.55 16 Plate for wind girder A 36 12000 2500 6.00 7.00 3 21.00 29.67 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.53

Total w.t for 3 Tanks 3,068.7

Note : The above indicated thicknesses are calculated as per Design Code API 650 11th Edition Add 3.

Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0721 to 723 of 206



PRODUCT VGO Storage Tank Ht 22000 mm Des. Tem.

Type: Alumin. dome roof tank Specific gravity 0.895 Des. Pres.




C Pipe1 2" Pipe SA106 GR B 3590000 - - 1.00 3 7.47 80.45 2 3" Pipe SA106 GR B 52000 - - 1.00 3 15.26 2.38 3 4" Pipe SA106 GR B 5000 1.00 3 22.30 0.33 4 6" Pipe SA106 GR B 1500 - - 1.00 3 42.50 0.19 5 8" Pipe SA106 GR B 26000 - - 1.00 3 64.57 5.04 6 10" Pipe SA106 GR B 25000 - - 1.00 3 81.46 6.11

D Flange1 2" Nozzle - 150 # A 105 6 3 2.30 0.04 2 3" Nozzle - 150 # A 105 7 3 3.70 0.08 3 4" Nozzle - 150 # A 105 1 3 5.90 0.02 4 6" Nozzle - 150 # A 105 4 3 8.60 0.10 5 8" Nozzle - 150 # A 105 2 3 13.70 0.08 6 10" Nozzle - 150 # A 105 2 3 19.50 0.12 7 30" Nozzle - 150 # A 105 1 3 59.00 0.18 8 42" Nozzle - 150 # A 105 1 3 375.00 1.13 9 Fittings, Bolts & Nuts A 105 1 3 6.00




Pipe Lenth (mm) Qty

No of tanks

J60-D-0721 to 723 of 206


16 Deg.C

120 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

J60-D-0721 to 723 of 206


16 Deg.C

120 Deg. C

1 kPa

J60-D-0801 & 802 & 0803 of 206


TANK TAG NO J60-D-0801 & 802 & 803 Tank Dia 18000 mm MDMT

PRODUCT Asphalt Tank Ht 22000 mm Des. Tem.



MTO





13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 14.00 1.00 3 3.00 9.891 14 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 3 1.00 1.413 15 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 3 1.50 4.946 16 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 3 0.30 1.554 17 Plate for wind girder A 36 12000 2500 6.00 1.00 3 3.00 4.239 18 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.533 19 Clean out door A 36 12000 2500 36.00 0.20 3 0.60 5.087


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0801 & 802 & 0803 of 206



PRODUCT Asphalt Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 56549 3 17.70 3.003 2 Stairways and platform A 36 6.50 3 19.500 3 Roof structure A 36 8.00 3 24.000 4 Insulation supports A 36 3.00 3 9.000 5 Miscellaneous support 6.000






Pipe Lenth (mm) Qty

No of tanks

J60-D-0801 & 802 & 0803 of 206


16 Deg.C

250 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

J60-D-0801 & 802 & 0803 of 206


16 Deg.C

250 Deg. C

1 kPa

J60-D-0804 of 206






MTO





12 Plate for RF pad of Nozzles & Manways A36 12000 2500 18.00 1 1 1.00 4.239 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1 1 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 26.00 0.10 1 0.10 0.612 16 Plate for wind girder A 36 12000 2500 8.00 0.00 1 0.00 0.000 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 1 3.00 3.533

18 Plate for clean out door A36 12000 2500 36.00 0.20 1 0.20 1.696 19 Roof plate A36 12000 2500 8.00 29.00 1 29.00 54.636


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0804 of 206







B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 72257 1 17.70 1.279 2 Stairways and platform A 36 9.11 1 9.110 3 Top wind girder / walkway A 36 12.64 1 12.640 4 Steel Roof structure - 0 0.000 5 Insulation cleats A 36 1 1 1.000 6 Miscellaneous support 3.000






Pipe Lenth (mm) Qty

No of tanks

J60-D-0804 of 206


16 Deg.C

230 Deg. C

1 kPa

MTO

Total PriceRemarks

USD

J60-D-0804 of 206


16 Deg.C

230 Deg. C

1 kPa

NA

Heating coil

J60-D-0903 & 904 & 0906 of 206



PRODUCT Heavy slops Tank Ht 22000 mm Des. Tem.



MTO





13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 14.00 1.00 3 3.00 9.891 14 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 3 1.00 1.413 15 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 3 1.50 4.946 16 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 3 0.30 1.554 17 Plate for wind girder A 36 12000 2500 6.00 0.00 3 0.00 0.000 18 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.533 19 Clean out door A 36 12000 2500 36.00 0.20 3 0.60 5.087


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

J60-D-0903 & 904 & 0906 of 206



PRODUCT Heavy slops Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 56549 3 17.70 3.003 2 Stairways and platform A 36 6.50 3 19.500 3 Roof structure A 36 8.00 3 24.000 4 Insulation supports A 36 3.00 3 9.000 6 Miscellaneous support 3.000






Pipe Lenth (mm) Qty

No of tanks

J60-D-0903 & 904 & 0906 of 206


16 Deg.C

250 Deg. C

1 kPa

MTOTotal Price

RemarksUSD

J60-D-0903 & 904 & 0906 of 206


16 Deg.C

250 Deg. C

1 kPa

API 620 J60-D-0-0114 of 206


TANK TAG NO . J60-D-0114 Tank Dia 66000 mm MDMT

PRODUCT Naptha Tank Ht 22000 mm Des. Tem.

Type: IFR with CS dome Specific gravity 0.704 Des. Pres.


MTO



A PLATES1 Tank shell 1st course (Bottom) SA 537 Cl.2 12000 2500 68.00 18.00 1 18.00 288.252 2 Tank shell 2nd course SA 537 Cl.2 12000 2500 62.00 18.00 1 18.00 262.818 3 Tank shell 3rd course SA 537 Cl.2 12000 2500 56.00 18.00 1 18.00 237.384 4 Tank shell 4th course SA 537 Cl.2 12000 2500 50.00 18.00 1 18.00 211.950 5 Tank shell 5th course SA 537 Cl.2 12000 2500 46.00 18.00 1 18.00 194.994 6 Tank shell 6th course SA 537 Cl.2 12000 2500 40.00 18.00 1 18.00 169.560 7 Tank shell 7th course SA 516 Gr.70 12000 2500 38.00 18.00 1 18.00 161.082 8 Tank shell 8th course SA 516 Gr.70 12000 2500 32.00 18.00 1 18.00 135.648 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 24.00 18.00 1 18.00 81.389

10 Tank Bottom Plate SA 516 Gr.70 12000 2500 10.0 115.00 1 115.00 270.825 11 Annular plates SA 516 Gr.70 12000 2500 14.0 16.00 1 16.00 52.752 12 Dome roof (CS) SA 516 Gr.70 12000 2500 10.0 116.00 1 116.00 273.180 13 Compression plate SA 516 Gr.70 12000 2500 40.0 16.00 1 16.00 150.720 14 Plate for RF pad of Nozzles & Manways SA 537 Cl.2 12000 2500 40.0 1.50 1 1.50 14.130 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.0 1.00 1 1.00 1.884 16 Plate for Nozzle neck SA 537 Cl.2 12000 2500 16.0 1.00 1 1.00 3.768 17 Plate for manway cover / bolting flange SA 537 Cl.2 12000 2500 20.0 0.15 1 0.15 0.707 18 Plate for wind girder A 36 12000 2500 8.0 2.50 1 2.50 4.710 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.0 3.00 1 3.00 3.533


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

API 620 J60-D-0-0114 of 206



PRODUCT Naptha Tank Ht 22000 mm Des. Tem.




B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 207345 1 17.70 3.670 2 Stairways and platform A 36 11.94 1 11.940 3 Top wind girder / walkway A 36 22.94 1 22.940 4 Roof structure A 36 150.00 1 150.000 5 Miscellaneous w.t A 36 5.00 1 5.000

C Pipe1 2" Pipe SA106 Gr B 90000 - - 1.00 1 7.47 0.672 2 3" Pipe SA106 Gr B - - 1.00 1 15.26 0.000 3 4" Pipe SA106 Gr B 10000 - - 1.00 1 22.30 0.223 4 6" Pipe SA106 Gr B 2000 - - 1.00 1 42.50 0.085 5 8" Pipe SA106 Gr B 24000 - - 1.00 1 64.57 1.550





Pipe Lenth (mm) Qty

No of tanks

API 620 J60-D-0-0114 of 206


16 Deg.C

75 Deg. C

50 kPa

Total PriceRemarks

USD

API 620 J60-D-0-0114 of 206


16 Deg.C

75 Deg. C

50 kPa

API 620 J60-D-0121 of 206



PRODUCT Light naptha Tank Ht 22000 mm Des. Tem.

Type: IFR with dome Specific gravity 0.615 Des. Pres.


MTO



A PLATES1 Tank shell 1st course (Bottom) SA 537 Cl.2 12000 2500 40.00 10.00 1 10.00 94.200 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 38.00 10.00 1 10.00 89.490 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 36.00 10.00 1 10.00 84.780 4 Tank shell 4th course SA 516 Gr.70 12000 2500 32.00 10.00 1 10.00 75.360 5 Tank shell 5th course SA 516 Gr.70 12000 2500 28.00 10.00 1 10.00 65.940 6 Tank shell 6th course SA 516 Gr.70 12000 2500 25.00 10.00 1 10.00 58.875 7 Tank shell 7th course SA 516 Gr.70 12000 2500 22.00 10.00 1 10.00 51.810 8 Tank shell 8th course SA 516 Gr.70 12000 2500 18.00 10.00 1 10.00 42.390 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 14.00 10.00 1 10.00 26.376

10 Tank Bottom Plate SA 516 Gr.70 12000 2500 8.00 31.00 1 31.00 58.404 11 Annular plates SA 516 Gr.70 12000 2500 14.00 6.00 1 6.00 19.782 12 Dome roof SA 516 Gr.70 12000 2500 8.00 30.00 1 30.00 56.520 13 Compression plate SA 516 Gr.70 12000 2500 22.00 6.00 1 6.00 31.086 14 Plate for RF pad of Nozzles & Manways SA 537 Cl.2 12000 2500 40.00 1.50 1 1.50 14.130 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.00 1.00 1 1.00 1.884 16 Plate for Nozzle neck SA 537 Cl.2 12000 2500 16.00 1.00 1 1.00 3.768 17 Plate for manway cover / bolting flange SA 537 Cl.2 12000 2500 20.00 0.15 1 0.15 0.707 18 Plate for wind girder A 36 12000 2500 8.00 2.00 1 2.00 3.768 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.00 3.00 1 3.00 3.533


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

API 620 J60-D-0121 of 206








C Pipe1 2" Pipe SA106 Gr B 70000 - - 1.00 1 7.47 0.523 2 4" Pipe SA106 Gr B 10000 - - 1.00 1 22.30 0.223 3 6" Pipe SA106 Gr B 1000 - - 1.00 1 42.50 0.043 4 8" Pipe SA106 Gr B 23500 - - 1.00 1 64.57 1.517

D Flange1 2" Nozzle - 150 # A 105 6 1 2.30 0.014 2 4" Nozzle - 150 # A 105 1 1 5.90 0.006 3 6" Nozzle - 150 # A 105 5 1 8.60 0.043 4 8" Nozzle - 150 # A 105 1 1 13.70 0.014 5 10" Nozzle - 150 # A 105 1 1 19.50 0.020 6 12" Nozzle - 150 # A 105 6 1 29.00 0.174




Pipe Lenth (mm) Qty

No of tanks

API 620 J60-D-0121 of 206






API 620 J60-D-0121 of 206


16 Deg.C

75 Deg. C

50 kPa

Total PriceRemarks

USD

API 620 J60-D-0121 of 206


16 Deg.C

75 Deg. C

50 kPa

API620 J60-D-0241 242 of 206


TANK TAG NO . J60-D-0241 & 0242 Tank Dia 29000 mm MDMT

PRODUCT Isomerate Tank Ht 22000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 36.00 8.00 2 16.00 135.648 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 34.00 8.00 2 16.00 128.112 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 32.00 8.00 2 16.00 120.576 4 Tank shell 4th course SA 516 Gr.70 12000 2500 28.00 8.00 2 16.00 105.504 5 Tank shell 5th course SA 516 Gr.70 12000 2500 25.00 8.00 2 16.00 94.200 6 Tank shell 6th course SA 516 Gr.70 12000 2500 22.00 8.00 2 16.00 82.896 7 Tank shell 7th course SA 516 Gr.70 12000 2500 20.00 8.00 2 16.00 75.360 8 Tank shell 8th course SA 516 Gr.70 12000 2500 16.00 8.00 2 16.00 60.288 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 14.00 8.00 2 16.00 42.202

10 Tank Bottom Plate SA 516 Gr.70 12000 2500 10.0 21.00 2 42.00 98.910 11 Annular plates SA 516 Gr.70 12000 2500 14.0 6.00 2 12.00 39.564 12 Dome roof SA 516 Gr.70 12000 2500 10.0 21.00 2 42.00 98.910 13 compression plate SA 516 Gr.70 12000 2500 22.0 6.00 2 12.00 62.172 14 Plate for RF pad of Nozzles & Manways SA 537 Cl.2 12000 2500 40.0 1.50 2 3.00 28.260 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.0 1.00 2 2.00 3.768 16 Plate for Nozzle neck SA 537 Cl.2 12000 2500 16.0 1.00 2 2.00 7.536 17 Plate for manway cover / bolting flange SA 537 Cl.2 12000 2500 20.0 0.15 2 0.30 1.413 18 Plate for wind girder A 36 12000 2500 8.0 2.00 2 4.00 7.536 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.0 3.00 2 6.00 7.065


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

API620 J60-D-0241 242 of 206


TANK TAG NO . J60-D-0241 & 0242 Tank Dia 29000 mm MDMT

PRODUCT Isomerate Tank Ht 22000 mm Des. Tem.










Pipe Lenth (mm) Qty

No of tanks

API620 J60-D-0241 242 of 206


16 Deg.C

75 Deg. C

50 kPa

Total PriceRemarks

USD

API620 J60-D-0241 242 of 206


16 Deg.C

75 Deg. C

50 kPa

API620 J60-D-0243 of 206



PRODUCT Isomerate / MTBE Tank Ht 22000 mm Des. Tem.



MTO



A PLATES1 Tank shell 1st course (Bottom) SA 537 Cl.2 12000 2500 58.00 12.00 1 12.00 163.908 2 Tank shell 2nd course SA 537 Cl.2 12000 2500 54.00 12.00 1 12.00 152.604 3 Tank shell 3rd course SA 537 Cl.2 12000 2500 50.00 12.00 1 12.00 141.300 4 Tank shell 4th course SA 537 Cl.2 12000 2500 45.00 12.00 1 12.00 127.170 5 Tank shell 5th course SA 537 Cl.2 12000 2500 42.00 12.00 1 12.00 118.692 6 Tank shell 6th course SA 537 Cl.2 12000 2500 38.00 12.00 1 12.00 107.388 7 Tank shell 7th course SA 516 Gr.70 12000 2500 38.00 12.00 1 12.00 107.388 8 Tank shell 8th course SA 516 Gr.70 12000 2500 34.00 12.00 1 12.00 96.084 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 30.00 12.00 1 12.00 67.824

10 Tank Bottom Plate SA 516 Gr.70 12000 2500 10.0 49.50 1 49.50 116.573 11 Annular plates SA 516 Gr.70 12000 2500 14.0 8.00 1 8.00 26.376 12 Dome roof SA 516 Gr.70 12000 2500 14.0 50.00 1 50.00 164.850 13 Compression plate SA 516 Gr.70 12000 2500 38.0 8.00 1 8.00 71.592 14 Plate for RF pad of Nozzles & Manways SA 537 Cl.2 12000 2500 40.0 1.50 1 1.50 14.130 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.0 1.00 1 1.00 1.884 16 Plate for Nozzle neck SA 537 Cl.2 12000 2500 15.0 1.00 1 1.00 3.533 17 Plate for manway cover / bolting flange SA 537 Cl.2 12000 2500 20.0 0.15 1 0.15 0.707 18 Plate for wind girder A 36 12000 2500 8.0 2.50 1 2.50 4.710 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.0 3.00 1 3.00 3.533


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

API620 J60-D-0243 of 206



PRODUCT Isomerate / MTBE Tank Ht 22000 mm Des. Tem.










Pipe Lenth (mm) Qty

No of tanks

API620 J60-D-0243 of 206


16 Deg.C

75 Deg. C

100 kPa

Total PriceRemarks

USD

API620 J60-D-0243 of 206


16 Deg.C

75 Deg. C

100 kPa

API620 J60-D-00901 902 905 of 206


TANK TAG NO . J60-D-0901 &0902 & 0905 Tank Dia 18000 mm MDMT

PRODUCT Light slops Tank Ht 22000 mm Des. Tem.

Type: IFR with Cone Specific gravity 0.858 Des. Pres.


MTO



A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 25.00 5.00 3 15.00 88.313 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 22.00 5.00 3 15.00 77.715 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 20.00 5.00 3 15.00 70.650 4 Tank shell 4th course SA 516 Gr.70 12000 2500 18.00 5.00 3 15.00 63.585 5 Tank shell 5th course SA 516 Gr.70 12000 2500 25.00 5.00 3 15.00 88.313 6 Tank shell 6th course SA 516 Gr.70 12000 2500 14.00 5.00 3 15.00 49.455 7 Tank shell 7th course SA 516 Gr.70 12000 2500 12.00 5.00 3 15.00 42.390 8 Tank shell 8th course SA 516 Gr.70 12000 2500 10.00 5.00 3 15.00 35.325 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 8.00 5.00 3 15.00 22.608

10 Tank Bottom Plate SA 516 Gr.70 12000 2500 8.0 7.50 3 22.50 42.390 11 Annular plates SA 516 Gr.70 12000 2500 14.0 4.00 3 12.00 39.564 12 Cone roof SA 516 Gr.70 12000 2500 24.0 7.00 3 21.00 118.692 13 Compression Plate SA 516 Gr.70 12000 2500 32.0 4.00 3 12.00 90.432 14 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 25.0 1.50 3 4.50 26.494 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.0 1.00 3 3.00 5.652 16 Plate for Nozzle neck SA 516 Gr.70 12000 2500 16.0 1.00 3 3.00 11.304 17 Plate for manway cover / bolting flange SA 516 Gr.70 12000 2500 20.0 0.15 3 0.45 2.120 18 Plate for wind girder A 36 12000 2500 8.0 1.00 3 3.00 5.652 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.0 3.00 3 9.00 10.598


Plate QTY(Nos)

No. of Tanks


Wt. (MT)Length

(mm)

API620 J60-D-00901 902 905 of 206


TANK TAG NO . J60-D-0901 &0902 & 0905 Tank Dia 18000 mm MDMT

PRODUCT Light slops Tank Ht 22000 mm Des. Tem.

Type: IFR with Cone Specific gravity 0.858 Des. Pres.



B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 56549 3 17.70 3.003 2 Stairways and platform A 36 16.00 3 48.000 3 Top wind girder / walkway4 Roof structure A 36 35.00 3 105.000 5 Miscellaneous w.t A 36 5.00 3 15.000


D Flange1 2" Nozzle - 150 # A 105 12 3 2.30 0.083 2 4" Nozzle - 150 # A 105 4 3 5.90 0.071 3 6" Nozzle - 150 # A 105 2 3 8.60 0.052 4 8" Nozzle - 150 # A 105 6 3 13.70 0.247 5 18" Nozzle - 150 # 1 59.00




Pipe Lenth (mm) Qty

No of tanks

API620 J60-D-00901 902 905 of 206


16 Deg.C

120 Deg. C

50 kPa

Total PriceRemarks

USD

API620 J60-D-00901 902 905 of 206


16 Deg.C

120 Deg. C

50 kPa

EPC- 5 of 206


EPC - 5

MTO FOR STEEL STORAGE TANKS

GENERAL NOTES & ASSUMPTIONS1 The plate thicknesses are calculated as per Design Code API 650 11th Edition Add 3 and API 620 as specified in data sheet.

2 All instrument connection nozzles are assumed as 2" size for MTO.

3 Nozzles above 10" are assumed as plate fabricated.

4 All tanks with diameter > 25m, 5% margin considered on total weight .

5 All tanks with diameter < 25m, 5-10% margin considered on total weight and 2.5% margin considered for Spherical tanks.

6

7 Material supplier shall consider exact thickness specified in MTO and if order quantity is less, nearest standard thickness at higher side may be considered.

8 Aluminum Dome roof weight is not included in MTO and cost of Al Dome shall be obtained from the supplier / vendor.

9 Insulation material quantity not included.

10 All internal & external painting quantity and cost to be considered separatly .

11 Floating roof primary & secondary seals, roof deck drain, bleeder vent, flame arrester, tank mixer etc… are not included in the MTO, the same shall be considered for quote purpose.

12 Tank farm area stand alone platform and connecting platform between the tanks are not included in MTO.

13 Assumption for Platform steel weights : 250 kg/m for spiral Stair way, 50 kg/m for caged ladder, 150 kg/m for roof top platform and 175kg/m for top wind Girder walkway.

Calculated shell, bottom, roof plate thickness are rounded to nearest standard plate thickness (In MTO, the thickness that are revised to standard thickness is highlighted in yellow)

EPC- 5 of 206


EPC- 5 of 206


Floating roof primary & secondary seals, roof deck drain, bleeder vent, flame arrester, tank mixer etc… are not included in the MTO, the same shall be considered for quote purpose.

EPC- 5 of 206


EPC5 J60-D-0101 to 0107 of 206


Tank Tag No. J60-D-0101 to 107 Tank Dia 106000 mm MDMT

Product Crude Oil Storage tanks Tank Ht 23500 mm Des. Tem.

Type External Floating roof Specific gravity 0.873 Des. Press.


MTO



A PLATES1 Tank shell 1st course (Bottom) A537 Cl 2 12000 3000 45.00 28.00 7 196.00 2492.5322 Tank shell 2nd course A537 Cl 2 12000 3000 42.00 28.00 7 196.00 2326.3633 Tank shell 3rd course A537 Cl 1 12000 2500 36.00 28.00 7 196.00 1661.6884 Tank shell 4th course A537 Cl 1 12000 2500 30.00 28.00 7 196.00 1384.7405 Tank shell 5th course A 516 Gr 70 12000 2500 30.00 28.00 7 196.00 1384.7406 Tank shell 6th course A 516 Gr 70 12000 2500 20.00 28.00 7 196.00 923.1607 Tank shell 7th course A 36 12000 2500 16.00 28.00 7 196.00 738.5288 Tank shell 8th course A 36 12000 2500 10.00 28.00 7 196.00 461.5809 Tank shell 9th course (Top) A 36 12000 2500 10.00 28.00 7 196.00 461.580

10 Tank Bottom Plate A 36 12000 2500 8.00 300.00 7 2,100.00 3956.40011 Annular plates A 516 Gr 70 12000 2500 22.00 15.00 7 105.00 544.005

12 Plate for RF pad of Nozzles & Manways A537 Cl 2 12000 2500 45.00 1.50 7 10.50 111.27413 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 7 1.00 1.17814 Plate for Nozzle neck A537 Cl 2 12000 2500 14.00 2.00 7 14.00 46.15815 Plate for manway cover / bolting flange A537 Cl 2 12000 2500 22.00 0.10 7 0.70 3.62716 Plate for wind girder A 36 12000 2500 6.00 6.00 7 42.00 59.34617 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 7 21.00 24.728

Double Deck Floating roof18 Plate for deck bottom A 36 12000 2500 8.00 292.00 7 2,044.00 3850.89619 Plate for deck top A 36 12000 2500 5.00 292.00 7 2,044.00 2406.81020 Plate for Rim outside A 36 12000 2500 14.00 13.82 7 96.74 318.95221 Plate for Rim inside A 36 12000 2500 5.00 20.11 7 140.77 165.75722 Plate for Rim inside A 36 12000 3000 5.00 21.54 7 150.78 213.05223 Compartment plate A 36 12000 2500 5.00 14.64 7 102.48 120.67024 Plate for foam dam rim A 36 12000 2500 5.00 18.43 7 129.01 151.90925 Leg wear plate A 36 12000 2500 5.00 1.60 7 11.20 13.18826 Compartment manhole A 36 12000 2500 8.00 5.94 7 41.58 78.337


Plate QTY(Nos)

No. of Tanks

No. Tanks x Plate QTY(Total Nos of plates)

Wt. (MT)Length

(mm)

EPC5 J60-D-0101 to 0107 of 206


Tank Tag No. J60-D-0101 to 107 Tank Dia 106000 mm MDMT

Product Crude Oil Storage tanks Tank Ht 23500 mm Des. Tem.

Type External Floating roof Specific gravity 0.873 Des. Press.



B Structurals1 Curb Angle (100 x 100 x 12) A 36 333009 7 17.70 41.2602 Stairways and platform A 36 6.60 7 46.2003 Top wind girder / walkway A 36 58.28 7 407.9604 Roof structure - 0.00 - 0.0005 Floating roof structurals A 36 32.00 7 224.0006 Rolling ladder A 36 1.02 7 7.1407 Miscellaneous attachments, pipe support etc. A 36 10.000

C Pipe1 2" Pipe SA106 Gr.B 3000 - - 1.00 7 7.47 0.1572 4" Pipe SA106 Gr.B 91000 1.00 7 22.30 14.2053 6" Pipe SA106 Gr.B 124000 - - 1.00 7 42.50 36.8904 8" Pipe SA106 Gr.B 46000 - - 1.00 7 64.57 20.7925 Deck supports ( 4" sleeve & 3" support) SA106 Gr.B 9.40 1.00 7 65.800

D Flange1 2" Nozzle - 150 # A 105 19 7 2.30 0.3062 4" Nozzle - 150 # A 105 9 7 5.90 0.3723 6" Nozzle - 150 # A 105 12 7 8.60 0.7224 8" Nozzle - 150 # A 105 4 7 13.70 0.3845 14" Nozzle - 150 # A 105 2 7 59.00 0.8266 36" Nozzle - 150 # A 105 4 7 205.00 5.7407 48" Nozzle - 150 # A 105 1 7 428.00 2.9968 Fittings, Bolts & Nuts A 105 2 7 14.000




Pipe Lenth (mm) Qty

No of tanks

EPC5 J60-D-0101 to 0107 of 206


16 Deg.C

75 Deg. C

3 kPa

MTOTotal Price

RemarksUSD

EPC5 J60-D-0101 to 0107 of 206


16 Deg.C

75 Deg. C

3 kPa

NA

AKAZ 2 x 125 MW 9E GAS POWER PLANTAL ANBAR PROVENCE, IRAQ

Consolidated MTO for Plates Date :

S.No. Description MaterialSize (all dim. in mm)

RemarksThk (mm)

1 Plates ASTM A36 12000 2500 12 28 79.128

2 Plates ASTM A36 12000 2500 10 107 251.985

3 Plates ASTM A36 12000 2500 8 131 246.804

4 Plates ASTM A36 12000 2200 8 13 21.553

5 Plates ASTM A36 12000 2000 8 18 27.130

6 Plates for shell Manways flange & cover plate ASTM A36 8000 2000 18 1 2.261

7 Plates for anchor chair ASTM A36 8000 2500 30 1

7 Plates for anchor chair ASTM A36 8000 2500 36 1 5.652

8 Plates for Anchor chair Gusset ASTM A36 12000 2500 16 1 3.768

Following plate quantaties are newly added

9 Plates for Nozzles ASTM A36 12000 2500 14 1 3.297




13 Plates for Roof Structure ASTM A36 12000 2500 28 1 6.594






Total weight = 719.763 Metric Tons

Note :

1. This MTO is for Plates which includes Tank Shell Plates, Bottom Plates, Roof Plates and RF Pads for Nozzles / Manways.

2. Nozzles Pipes, Nozzle Flanges, Bolts & Nuts and other miscellaneous items are not considered, please refer detail drawings for the MTO.

3. Thickness of Plates are calculated as per Design Code and Corrosion Allowance 3.0 mm considered as per NIT requirement.4. Negative tolerance of plate size and thickness are not acceptable.5. For required thickness > 13mm, Material shall be impact tested considering MDMT.

QTY(Nos)

Wt. (MT)Length

(mm)Width (mm)

Anchor chair top plate thickness revised to 36 mm

17-March-12

Remarks

Metric Tons

Page 1 of 6

Anchor chair top plate thickness revised to 36 mm

jazan - mto for steel tanks_rev-b_24!08!12_option-2

Documents