SMITH ®

CUSTOMER DRIVEN

JAY R. SMITH MFG. CO. SINCE 1926Member of Morris Group International MORRIS GROUP

INTERNATIONAL

®

Agenda

•Grease+Gard II–What is it?•Market Issues•Grease+Gard II Sales Opportunity•Grease+Gard II Models•How Does It Work•The Agitator•Grease+Gard II Operation•Installation/ Applications•Listings/ Certifications•Grease+Gard II System Summary

• Grease+Gard II is the first approved Grease Recovery Device (GRD) that can be used on above-the-floor and in-floor greaseinterceptor applications.

• Grease+Gard II is also the first approved GRD applicationdevice that can also be used as a retrofit unit on most other manufacturers’ interceptors.

Definition

Market Issues

• Dealing with grease; dipping, pumping/disposalcosts and cleaning pipe blockages.

• Cleaning schedule, frequency and related high operating costs.

• Meeting stringent discharge requirements andpaying surcharges/fines for non-compliance.

• Increasing enforcement and tightening of Federal regulations.

• Grease+Gard II Retrofit Skimmer (Pat. # 7,296,694) is the only retrofit device intended for GRD applicationson the market today.

• The retrofit unit can be installed on most interceptors, saving thousands in interceptor replacement costs.

• The retrofit unit is a less expensive alternative to a standard grease recovery device.

• Meets applicable code requirements.

• Efficient and simple solutions for different applications.

• Smith now has a competitive GRD that equals the competition.

Sales Opportunity

Indirect Solids Interceptors

Solids interceptors provide a way to collect food solids to prevent them from entering the grease interceptor. Jay R. Smith Mfg. Co. offers an array of optional inline solids interceptors and indirect waste solids with Grease+Gard II systems in extreme applications .

Fig. No. 8960

Fig. No. 8980

How does it work?

• Belt technology along with a heaterand timer.

• The belt cycles through the grease layer.• Grease sticks to the belt.• The skimmer blades wipe the grease

off the belt.• The grease goes off the skimmer

blades and into the grease trough.• The grease trough feeds the grease

into the grease bucket where it is collected and removed dailyto a barrel for proper disposal.

Inline solids interceptor is optional and not included with the purchase

of the Grease+Gard II unit

• Grease + Gard II eliminates the need to stir the contents with Agitator technology, which maintains circulationin the interceptor.

• Helps circulate the top grease layer.

• Aids in drawing the greaseto the belt.

• Patented # 7,296,694.

The Agitator

The Process

Directionof Flow

Solids are captured before entering the Grease+Gard II

IntegralSeparator

Bucket

Grease Reservoir

Skimmer Belt & Blades

Agitator

Thermostat & Heaters

Jay R. Smith Mfg. Co.Soilds Interceptor

Optional UnitSold Separately

Jay R. Smith Mfg. Co.Grease+Gard II

• This GRD model can be used onmost in floor and above floorinterceptor applications.

• The tower is 13 1/4” high from the interceptor cover.

• Can add an extension to in ground applications if needed.

• Available in 20, 25, 35 and 50 GPM.

Models No. 8165 & 8166

Fig. No. 8165

Fig. No. 8166

Fig. No. 8165 & 8166 Submittal

Regularly Furnished: Automatic Grease Recovery Device (GRD) with Type 304 Stainless Steel Interceptor, No-Hub Connections, Flow Control Fitting, Dual Heaters

and Grease+Gard® II Skimmer with Grease Reservoir.

Fig. No. 8165

Fig. No. 8166

• This model is designed to fit into tight spaces where thereare clearance issues.

• It is designed for above floor installations only.

• The tower is 7 1/4” high from the interceptor cover.

• Available in 20, 25,35 and 50 GPM.

Fig. No. 8175 & 8176

Fig. No. 8175

Fig. No. 8176

Fig. No. 8175 & 8176 Submittal

Regularly Furnished: Automatic Grease Recovery Device (GRD) with Low Profile Grease+Gard® II Skimmer and Grease Reservoir, Dual Heaters, Type 304 Stainless Steel Interceptor with No-Hub Connections and Flow Control Fitting.

Fig. No. 8175

Fig. No. 8176

• Retrofit on existing greaseinterceptor cover.

• The tower is 13 1/4” high.

• Requires a square cut out of the top of the interceptor for installation.

• This model can be used onmost in-floor and some abovefloor interceptor applications.

Fig. No. 8165GG

Fig. No. 8165GG

Regularly Furnished: Stainless Steel Housing, Adjustable Timer, Skimming Belt,Mounting Base with Gasket, Dual Heaters and Removable Grease Reservoir.

Fig. No. 8165GG Submittal

Fig. No. 8165GG

• Retrofit on existing grease interceptor cover.

• The tower is 7 1/4” high.

• Requires a cut out of the top of the interceptor for installation.

• This model is designed to fit intotight spaces where there are clearance issues.

Fig. No. 8175GG

Fig. No. 8175GG

Regularly Furnished: Low Profile Stainless Steel Housing, Adjustable Timer, Skimming Belt, Mounting Plate with Gasket, Dual Heaters and Removable Grease Reservoir.

Fig. No. 8175GG Submittal

Fig. No. 8175GG

• Sold Separately–not included with the Grease+Gard II.

• Inline and indirect solid interceptor assembliesto be installed at the solids source.

• Primary and secondary straining systems in each system. Any solids due to erosion thatpass the primary screen and sink to the bottomof the sump will be captured and removed bythe filter bag.

• Future capabilities of being semi-automatic.

Solids Interceptors

Fig. No. 8980

Fig. No. 8960

Regularly Furnished: Fabricated Type 304 Stainless Steel Body with Adjustable

Legs, Perforated Bottom Bucket and Secondary Poly Mesh Strainer.

Indirect Solids InterceptorsFig. No. 8960 Submittal

Fig. No. 8960

Indirect Solids InterceptorsFig. No. 8980 Submittal

Fig. No. 8980

Regularly Furnished: Fabricated Type 304 Stainless Steel Body with Adjustable Legs, Perforated Bottom Bucket, Secondary Poly Mesh Strainer and Secured Cover.

Installation/ Application of Smith’s Grease Recovery Device

Inline Solid InterceptorFig. # 8980 (Optional)

Smith Stainless Floor DrainFig. # 9700

Smith Stainless Cleanout

Fig. # 9760

Smith Stainless Floor SinkFig. # 9691

Low Type Stainless Steel GRDwith Integral Separator Bucket

Fig. # 8166

Inline Solid InterceptorFig. # 8980 (Optional)

Stainless Steel GRD with Low Profile Skimmerwith Integral Separator Bucket

Fig. # 8175

The Grease+Gard II - Grease Recovery Device can be used to remove excess grease from the interceptor in any kitchen facility. The drawing below shows how the Grease+Gard II might beused in conjunction with other products in a typical kitchen setting.

• Restaurants • Grocery/Convenience Stores • Churches• Casinos• School Cafeterias• Correctional Facilities• Retirement Homes• Mall Food Courts• Airport Eateries• Sports Arenas

Commercial Kitchen and Food Processing Applications

Installation/ Application of Smith’s Grease Recovery Device

• IAPMO listed as a GRD for territories using the Uniform Plumbing Code (UPC).

• This IAPMO listing of our GRD’s is for both new installationsand retrofit installations on other manufacturers’ interceptors.

• The 8165GG and 8175GG are IAPMO listed through the MC (Material and Component) listing program.

• PDI Certified.

• Tested and certified to the National Consensus Standards ASME A112.14.3 and A112.14.4 – Grease Removal Devices.

Listings/ Certifications

• Smith now has the broadest product line of Grease and Solids Interceptors in the entire industry = more opportunities to closea sale to fit everyone’s budget or configurations.

• Grease+Gard II Retrofit Skimmer (patent pending) is the only retrofit device for GRD applications on the market today.

• Grease+Gard II Retrofit Skimmer can be installed on most interceptors, saving thousands in interceptor replacement costs.

• The Retrofit Skimmers (8165GG and 8175GG) are less expensive alternatives to grease recovery devices.

• Approved, efficient and simple solutions for different applications.

System Summary

SMITH ®

CUSTOMER DRIVEN

JAY R. SMITH MFG. CO. SINCE 1926Member of Morris Group International

JAY R. SMITH MFG. CO.

MORRIS GROUPINTERNATIONAL

Post Office Box 3237Montgomery, Alabama 36109-0237

(800) 467-6484

www.jrsmith.com

www.morrisgroup.co