jaxres jan 17
TRANSCRIPT
EXPERIENCE SUMMARY OF GREG JACKSON18149 Bal Harbour Dr.Houston, Texas 77058
EducationUniversity of Indianapolis, Indianapolis, Indiana 1986-88
Indiana/Purdue University Fort Wayne, Indiana 1984GAS TURBINE EXPERIENCE SUMMARY
27 years Gas Turbine Specialist/GE LM product line ExperienceMore than 6 years US NAVY (GSM)
21 years experience as Gas Turbine Specialist/Technician 20 years experience GE Frame 5, 6 and 7
19 years experience with GE Package Field service/Start-up/Commissioning9 years’ experience as Consultant/Customer representative and Manager on sites
6 years experience as a Gas Turbine Instructor 5 years experience in shop environment
2 years experience as a Gas Turbine Technical Writer
4/7-Present Gas Turbine Consultant/Specialist/Trainer/Field ServiceGranite Services International, Houston TX4/16 to present GAS TURBINE TECHNICAL ADVISOR for GENERAL ELECTRIC
Conducting Hot Gas Path Inspections (HGP), Major Inspections on 7FA’s.Houston Learning Center Instructor at Houston Texas as a TA Instructor for class ELT 16-37FA.05 INSTALLATION AND UPGRADE for Florida Power and Light (FPL) 7FA.05 Installation at Fort Lauderdale Florida as Commissioning Manager of the Inlet Filtration and Evaporation system. 7FA.05 Upgrade at Fort Myers, Florida replacing the rotor, CDC and Compressor casing to an IGV/VSV designMAJOR OVERHAULS/HOT GAS PATHS for DYENERGY (Kendall County Generation) Illinois on unit 3 and ENTERGY (Perryville, Louisiana) on unit 2A. Major overhaul at Ouachita, Louisiana on the 2 Block El Dorado Arkansas for punch list itemsINSPECTIONS at Oneta Power (Broken Arrow Oklahoma) with a Borescope and R0-R1 TIL’sGateway 7FA outage at Mount Enterprise, TX for punch list items and NRG Choctaw 7FA punch list items at French Camp, MS
Brunel Energy Inc. Houston, TX 6/15 to 3/16 GAS TURBINE Inspector/Consultant to MODEC International Houston,
Texas office. CUSTOMER REPRESENTATIVE on 4 LM2500+ G4 for single cycle use in Brazil, South America. I review all work and documentation in building the units
POWER PRO-TECH SERVICES Altamonte Springs, FL 4-5/15 GAS TURBINE Field Service CUSTOMER REPRESENTATIVE on 2 Solar turbines
(GSE-100 and 45618-100) for Annual Inspection in Lincoln, NEFFG Strategic Consulting Houston, TX 4/15 GAS TURBINE CONSULTANT to DUKE ENERGY EDEN, NC.
CUSTOMER REPRESENTATIVE on 2 MS7000 (Frame 7FA’s) for a Hydrogen Seal investigation/Replacement and oil flush.
Turbine Tech International LLC Houston, TX 9/14 and 3/15 TURBINE CONSULTANT/Advisor-Borescope Specialist to SIMSA Generation
Station in Panama City, Panama. I Borescoped and advise on 2 MS5000 (Frame 5M’s) prior to scheduled CI outage
EXPERIENCE SUMMARY OF GREG JACKSON18149 Bal Harbour Dr.Houston, Texas 77058
TECHNICAL DIAGNOSTIC SERVICES, Dallas, TX 9-11/14 LMS 100 INSTRUCTOR at Montana Power Plant El Paso, Texas2/15 Balance of Plant Manager at Montana Power Plant El Paso, Texas
I instructed an 8-week course that covers all parts and systems of the LMS 100 for Balance of Plant manager with Gas and Air Systems
S&W Energy Solutions, Houston, TX 6-9/14 CONSULTANT/CONTROL ROOM Operations Takoradi T3 Plant
Advise over daily activities on this combined cycle plant with 4 OGT25000 turbines11/11, 8-9/12 LM6000/LMS 100 INSTRUCTOR at Trans Canada Turbines, Calgary Alberta, Bajo Grande,5/13 PEMEX Mexico City and Maturin Venezuela on FAM, LEVEL 1 and 2 Training9/12 OGT25000 INSTRUCTOR at T3 in Ghana, Africa6/10- 10/12 Gas Turbine CONSULTANT/Customer Representative, CITGO OIL
VENEZUELA overseeing Installation/Start-up/DLN Tuning/Operations the first (2)-7FA’s on barges (2 of them) to CITGO stationed in Caracas, Venezuela.
9/07 – 11/08 OPERATIONS SWES ALGHANIM SHUAIKH and SABIA PEAK POWER PLANT, Kuwait Start-up/Nightshift Operator/Trainer/Supervisor with 12 LM 6000’s (4 DLE’s-Dry Low Emission and 8 PC’s). I trained 20 personal for operators on Gas compressors and Liquid fuel systems, Air systems, Chiller systems and the normal operation of the LM 6000’s
ISOLUX Corsán UTE Argentina3/14-4/14 Gas Turbine CONSULTANT for Siemens SGT5-4000F for Central Termoelectrica
Brigodier Lopez located outside of Santa Fe. I was the Lead Consultant for the Minor overhaul for case issues and Stage 1 blade replacement.
Kelly Services, Houston, TX 10/13-3/14 Technical Writer for DOW Chemical, Houston for the SADARA Project in Saudi Arabia writing
Mechanical procedures for all Balance of Plant (BOP) equipment.HPI-LLC, Houston, TX11/14-12/14 GE Frame 5 Instructor for Hourage Oil Company, Libya
Instructed on Turbine Familiarization, Airflow, Gas-path, parts overview on a MS5001 GE Turbine engine and associated systems in Lincoln, England.
10/12-10/13 Technical Director Aeroderivates Gas Turbines Specializing on LM engine line work Borescopes, Inspections, Teaching Familiarization, level 1 and 2 for LM 2500 and LM6000’s, Hot Gas Path replacements and Service Bulletin work
REV 1 Power Systems, Tampa, FL 1/10-2/10 NEW YORK POWER AUTHORITY, Astoria Site New York City
Foreign Material Exclusion Representative “FME” for Wood Group on 2 GE Frame 7FA units.
10/9 DOMINION HILLS Energy Fairless Hills, PA 05/10 Outage Supervisor completing the GE MAJOR with a “Big Foot Modification” on Frame 7FA-
SC unit in May 2010 and October 2009 and report to Plant manager.9/9-10/9 MENDOTA HILLS, Illinois
Lead Borescope inspector Borescoped and taught personal how to use a Borescope and to identify discrepancies and report procedures on 63 Wind Turbine Units.
2/9-7/9 Burns and McDonnell Anadarko, Oklahoma Start-up Mechanical Lead LM 6000 PC in charge of Demine and Service Water, UE Compressor Gas Systems, Ingersoll Rand Air Systems and Stellar Chiller Systems
EXPERIENCE SUMMARY OF GREG JACKSON18149 Bal Harbour Dr.Houston, Texas 77058
5/7-7/7 SCE Grapeland, California Commissioning Manager LM 6000 PC in charge of Fire and Potable water, Fire System, Cathodic system and Waste water
3/7-5/7 FPL Ft. Myers, Florida Dayshift Supervisor completing Major Overhauls on Units 7 and 12 GE 7B Frame engines
GENERAL ELECTRIC POWER SYSTEMS Houston, TX 1999-07 GE Field service Technician Aero Derivatives at Houston 99-2000 and
Bakersfield CA 04-07. Field Service Technician on the LM engine lines (1600, 2500, 5000, 6000 and the LMS 100), conducting engine replacements, hot sections, Bore-scope inspections on all turbine and Brush Generators and Troubleshooting. GE Gas Turbine Technician Houston Texas, GE Houston DEPOT 00-04 Mechanical Technician – Assigned to the Frames area, teardown and Final Assembly on the LM engines 2500, 5000 and 6000. I completed and achieved Level 4 rating with Skill Band Knowledge on engine, in June 2004.
6/03 GE Holland Depot, Rheden, Holland10/04 -12/04 Preformed overhauls on LM 6000's and 2500's in Holland Depot for 2 consecutive years.INDECK Field service Tech, Grand Island, NY. 1997/99 Field Service Turbine Technician Conducted major and minor overhauls of Frame 5, 6
and 7’s with Indeck's company engines fleet and engines for Shell, Texaco and Mobile.US NAVY12/90-8/97 Gas Turbine Specialist, GSM2 E-5
USS Spruance DD-963 as Main Engine Room Operator Jacksonville, FLACU-5 (hovercrafts) Camp Pendleton, CA assigned to WESPAC “A” in Sasebo Japan. Attended "A" (1990) and "C" (1994) school while serving in the navy. I worked on TF40-B, Allison 501K's and LM 2500's engines while on the USS Spruance DD963 and ACU-5.
Specific Major Projects, Qualifications and Schools included:1/13 MIST (Minimum Industry Safety Training) for Off-shore work in the North Sea Region8/09 OSHA 30, First Aid and CPR Qualified until 7/118/09 Tech Safety Lines “ARK and SRK” (Assist and Self rescue kit) until 20102015-20 TWIC card for working in the USA on Docks around the country7/06 North Slope British Petroleum Alaska Engine Exchange with a LM 2500 DLE3/04 to 3/07 Basin Generation, GE's test site for the LMS 100 in South Dakota I preformed installation
and removal of engines with troubleshooting of IPT and service bulletin work.4/05 Service Bulletin 220, Inlet Gear Box Replacement on LM 6000
1 of 8 people selected and qualified in GE performing this procedure on the LM 6000 product line. I have been performing this since 2003 in the Houston Depot.
6/04 GE Depot Level 4 Achievement on LM 6000 engine product line02/00 GE BORESCOPE SCHOOL2/2000 GE LM 2500 COLD/HOT SECTION SCHOOL11/99 and 2/07 GE DLE MAPPING SCHOOL08/5,10/12-16 OFFSHORE PLATFORM TRAINING, Halifax, Nova Scotia and NASA Houston, TX
qualification thru 2016
All LM Gas turbine outages work in the field were either Replacement of Hot sections, replacement of engines and service bulletin compliances. All Gas Turbine work in the Depot was Total Teardown/Rebuild on all LM engine lines. All work with Frame units was HGP (hot gas path) Inspections, Combustion inspections and Major Overhauls with a BIG FOOT MOD.