james kast andrew kuharske timothy lenberg daniel taylor 1
Post on 19-Dec-2015
239 views
TRANSCRIPT
- Slide 1
- James Kast Andrew Kuharske Timothy Lenberg Daniel Taylor 1
- Slide 2
- Objective: To advance the development of an in house hybrid electric vehicle for use in testing Dr. Dean Edwards' experimental lead acid batteries. Background: Existing platform containing Dr. Edwards batteries Components from HUMV Specs APU PEU/Motor Exhaust Safety 2
- Slide 3
- Axels installed First Battery Isolation Test Voltage Controlled Fuel Test 3
- Slide 4
- 4
- Slide 5
- Control Method Options Mechanical Control Electrical Control 5
- Slide 6
- Controller Choice Familiarity Analog Inputs APU Control Scheme Options Linear Organization RTOS Centered 6
- Slide 7
- Check Sensors Check for Overvoltage Increment Coulomb Count Check Charge Parameters vtaskdelay 7
- Slide 8
- Check ButtonsDecode ButtonsOutput LEDs Update LCDvtaskdelay 8
- Slide 9
- Connect Kill Switch Startvtaskdelay(?) Altern. Voltage Step Up Voltage Regulate Voltage Connect 9
- Slide 10
- Assess State +/- Throttle Voltage vtaskdelay 10
- Slide 11
- DisconnectDecelerate Disconnect Kill Switch 11
- Slide 12
- 12
- Slide 13
- 13
- Slide 14
- 1 14
- Slide 15
- Specifications 500Vdc rated Digital/Analog output Accuracy