November 9, 2010 Auction Starts at 9 amPreview 8am - 4pm, Mon, Nov. 9

For more information go to www.murphyauction.com • Phone 425.486.1246

By Order of Receiver

2700 Orchard AveMcMinnville, OR 97128

James G. Murphy Inc.Commercial & Industrial Auctioneers

PUBLIC AUCTION

Reman Plant, Rolling Stock

Tuesday

NO MINIMUMS - NO RESERVES*

(8) 2008-2003 HEAT WAVE 22.20 RF 45’ kilns w/transfers between kilns, controls*2005 COMBI-LIFT CL60100LA54 10,000 lb capacity side loader

FOREST GROVE LUMBER

James G. Murphy Inc.www.murphyauction.com

425.486.1246 or 800.426.3008

(2) STETSON ROSS TIMBER SIZERS

NO MINIMUMS - NO RESERVES*

2008 DARIO SV3MAXI timber profile cutter ACCURUFF II timber 12x20 texture machine HOLY TEK AB800

48” Timber cut off saw,TECO 40 hp/1165 rpm, approx 100 hp hydraulic drive, hydraulic unit, infeed rollcase , 40’ outfeed rollcase, 6-strand jump transfer, hydraulic & SKK drives, clean out conveyor, roll top green chain, lumber decline belt

NEWMAN KM-16 multi-position timber cut off station, 20”, 7.5 hp, lugged chain infeed transfer, (2) outfeed belts w/drives, clean out belt

GRIZZLY G0549-LH, 24” timber chop saw, 1” arbor, fully enclosed blade guard, in & out gravity rolls, s/n: 24004

DEWALT 36” radial arm timber cut off saw, 10 hp, adjustable fence, UHMW table, in & out gravity rolls

INDUSTRIAL 7.5 hp right hand chop saw w/gravity rollsUnit saw w/72” bar, 10 hp, 5 hp hydraulic unit, 15’ infeed rollcase 13’ outfeed rollcase

Stackers18’ 4-arm hydraulic over end stacker w/5-arm lumber lowering hoist, 48” arms, 20 hp

hydraulic unit, take away transfer, infeed transfer w/even end belt, infeed transfer w/20’ even end rollcase, (3) 6-arm stops/skids

20” 5-arm mechanical over end stacker w/5-arm lumber lowering hoist, infeed transferCOE 12’ 5-arm over end stacker

Banding Station48” Hydraulic bander w/SIGNODE feeder head bump gate, 40 hp hydraulic unit, 23’

hydraulic infeed rollcase 30’ outfeed rollcase, 25’ 6-strand H78 infeed transfer, outfeed transfer w/SKK 5 hp/30 rpm drive

ChipperWSM 486HB, 48” chipper w/(6) knives, key knife conversion, 150 hp/880 rpm, s/n:

85879

Vibratory ConveyorEDEM 30”x46’ balanced vibratory conveyor

Blower-FeederSUTORBILT 18”x20” high pressure blowerPSI 20”x15” chip feeder w/motor to reducer

Chip Bins-Dust Collectors-Surge Bins-Blower-CycloneApprox 30-unit hydraulic chip bin w/8’ cyclone(2) Approx 20-unit hydraulic chip bins2008 GRIZZLY G06711, 4 hp dual bag dust collector, 3552 cfm, s/n: 0562652005 GRIZZLY single bag dust collector11’x11’x11’ surge bin w/6’ cyclone, AMERICAN size 419 blower, 25 hpApprox 48” blower, NEWMAN 100 hp/1180 rpm Large quantity of spiral blowpipe, 5” & 12”

Compressors-Air ReceiversQNW 490B rotary screw compressor, 100 hp, air cooled, SIEMENS SIKO START

3RW34 starter 12989 hrs, s/n: 850377SULLAIR 10B-40-AC rotary screw compressor, 40 hp, 26464 hrs, s/n: 00567490QNW C-25-J rotary screw compressor, 25 hp, horizontal tank, s/n: 910302SPEED AIRE 1WD78, 15 hp twin cylinder air compressorQNW QT5, 5 hp vertical tank mounted air compressorSARRACO 20”x60” horizontal air receiver, 150 psigCURTIS 24”x68” horizontal air receiver

Tilt Hoists-Scissor Lifts4’x20’ hydraulic scissor lift tilt hoist w/FLUID AIR 10 hp hydraulic unit18’ 6-arm tilt hoist w/48” arms x 46” travel, 30 hp hydraulic unit26’ 6-arm mechanical tilt hoist w/48” arms x 52” travel, motor to reducer20’ 4-arm mechanical tilt hoist w/52” arms x 74” travel, PACIFIC GEAR 15 hp/20 rpm

drive(2) 24”x48” scissor lifts on wheels (self contained)

Kilns(8) 2003-2008 HEAT WAVE 2220 E-Field vacuum kilns, 48”x54”x42’ capacity,

compressive loading w/250,000 lbs of pressure, BUSCH type RC0400, 330 cfm vacuums, TOSHIBA 20 hp, HYSECO hydraulic units, SPEED AIRE compressors, EATON/CUTLER HAMMER 4-section MCC w/160 kva clipper power system, (4) kilns w/COMDEL CD2500, 6.78 mhz generators, (4) kilns w/NAUTEL RF generators, all kilns w/45’ powered infeed rollcases, each pair w/outfeed rollcase, 8’x12’ control house (kilns sold subject to confirmation)

Bandsaws-ResawsSELECT SPECIALTIES 4221, 42”x21’ (extended to 40’) horizontal double cut

bandsaw,75 hp, 36” wheels, 14” throat, 34” between guides, (12) computerized board thickness sets, 48’ carriage, 4’x20’ hydraulic scissor lift tilt hoist, 7-1/2’ 5-strand H78 infeed transfer, 4-arm cant placer, FLUID AIR 10 hp hydraulic unit, outfeed rollcase/belt transfer, trash conveyor, 6-strand poly H78 outfeed transfer, 22’ 3-section jump rollcase, TOSVERT VF-S11 inverter, s/n: SELJ2121

2004 WOODMIZER LT-70 portable bandsaw, 36”x21’ (extended w/optional bed to 40’), CAT 2.2/3024 CT diesel, 400-800 bd ft/hr, 2-arm log loader, ACCUSET 2 controls, s/n: 456C724124NJA4240

2001 WOODMIZER LT-40 portable bandsaw, 36”x20’ (extended w/optional bed to 36’), KOHLER CH25 gas, 375-550 bd ft/hr, hydraulic turner, s/n: 456A3241x1NGH9719

2008 DARIO SV3 MAXI corbelling bandsaw, 2.2 kw motor, articulated arm, 45 degree tilt forward, 15 degree tilt backward table, s/n: 0806CC5ML

2006 resaw, 30 hp, conveyor, hydraulic feed wheel, blade guides, s/n: 3625HOLYTEK 36” resaw,30 hp2006 GRIZZLY G0531, 21” heavy duty bandsaw, s/n: 0602003, w/GRIZZLY G1172

bandsaw/resaw feeder (new in crate)TURNER 52” vertical band resaw, s/n: K151

Timber SizersSTETSON No. 4, 16”x20” timber sizer, GE 150 hp/890 rpm, 40 hp side head

motors, BENSHAW RMB6-180-1, 150 hp starter, ALLEN BRADLEY LOGIX PLC, STETSON ROSS 511E feed table, 7-strand infeed transfer, 16’ powered outfeed rollcase

STETSON ROSS No. 4A4, 16”x20” timber sizer, 40 hp side head motorsSTETSON ROSS No. 4, 24”x30” timber sizer, s/n: 165

Pedestal Mount Timber Stackers(2) 2009 MORBARK STAC TRAC 1000 hydraulic self-propelled timber stackers,

20 hp, 360 degree swing, 2-stage boom extension, electrics, s/n: 444 w/96’ of track, s/n: 445 w/48’ of track

GRIZZLY 160S pedestal mount log loader w/swivel grapple, enclosed cab

Moisture Sort System-Density Meter2007 NORTHERN MILL TECH INC MC PRO 2500T moisture sorting system w/

pass thru moisture meter, (2) paint pots, PLC controls, 24”x54’ scanner belt, SM CYCLO gearhead motor, infeed & outfeed rollcases

Director HM200 density meter, s/n: 0166

Texturing MachinesACCURUFF 4-side timber roughing texture machines, 10 hp, MITSUBISHI PLC,

BANNER PICO-GUARD eyes, MITSUBISHI E500-FRE540 drive, in & out gravity rolls, spare chains

ACCURUFF 4-sided timber roughing texture machine, 5 hp, pneumatic setworks, CNC 2-sided rough texture machine, (2) COLOMBO 3 hp/18-20,000 rpm motors,

belt transfers w/LENZE AC TECH vector driveSingle sided circle saw texture machine w/36” saw, WEG10 hp/350 rpm, feed rolls,

pneumatic fence, (2) SAFTRONICS GP10 variable frequency drives

Pallet Machine1994 VIKING TURBO 504 pallet assembly system w/automatic pallet stacker, s/n:

9400195, 9400196, right angle, s/n: 9400197, stacker s/n: 9400198, double brander s/n: 9400199

Cut Off Saws-Unit Saw

Scales-Bar Code Printers/ScannersPACIFIC TRUCK SCALES AVERY WEIGHTRONIX W125, 20,000 lb capacity,

4’x6’ platform scale, s/n: 036589PACIFIC TRUCK SCALES AVERY WEIGHTRONIX DSL7248-10, 10,000 lb

capacity, 4’x6’ platform scale, s/n: 55479(6) SATO GT480E barcode printersSATO barcode printerZEBRA ZFM-1 barcode printerPSC & RANGER hand held scanners

Saw Sharpening & Grinding Equipment2007 ACME BSA1100/ACME TALL BOY circle saw grinder, s/n: 13016FOLEY 357 top facer & relief, s/n: 133012HANCHETT DN40 travel bed knife grinder, s/n: 9296PSTIHL chain sharpener

Electrical2008 BENSHAW model RB2-1-S-180A15C,

100 hp redi-start solid state starter w/MX2 control, S/n: S200803194-1-1

BENSHAW RMB6-180-1, 150, 100 hp soft startsSIEMENS SIKO START 3RW34, 100 hp starter(3) 2007 CH EATON SV9000 adjustable frequency drivesSQUARE D model 6, 5-section MCC w/(22) switchesALLEN BRADLEY 2-section MCC w/(16) switchesALLEN BRADLEY 2-section MCC w/(9) switchesCUTLER HAMMER 2-section MCC w/(9) switches

Trash Compactor-Self Dumpers-Fuel TankWASTE QUIP approx 40 yard trash compactor, s/n: D15364(13) Approx 2 to 1/2 yd self dumping hoppers2002 WELBUILT, 1000 gallon diesel tank w/TUTHILL FR700 pump, s/n:

UL142-A53474

Timber Racks-Transfers-Conveyors-Rollcases-Miscellaneous Shop & StoresHuge assortment of bolt together & welded double & single sided timber racks,

65’, 40’ green chain, H78 transfers to 22’, powered rollcases to 96’ belt conveyors to 36’; PLUS: New CHAMPION 7000W generator; (2) MILLER TRAILBLAZER welder generators; LINCOLN Power Mig welder; MILLER SPECTRUM 625DC plasma cutting system; (2) oxy/acetylene sets; STIHL gas chain saws; (3) STIHL electric chain saws; STIHL gas chop saw; (3) GRIZZLY 14” bandsaws; GRIZZLY 12” bandsaw; (2) DELTA 12” bandsaws; 2007 HEMA ZS20 12” heavy duty portable bandsaw; MAKITA 16-5/16” beam saw; WOODTEK oscillating edge sander; GRIZZLY 6” tilt table spindle shaper; MIKIWAY TS1212, 12” tilting tale saw w/BIESSEMEYER fence; DEWALT DW375 6”x13” planer; CENTRAL MACHINE, JET 20” drill presses; LODGE & SHIPLEY 12”x36” engine lathe; ELLIS miter bandsaw; SUNEX 50 ton hydraulic shop press; parts washer; MAXUS 1 hp tank mounted air compressor; 2004 PARKER PHAST KRIMP crimper; CHICAGO ELECTRIC 14” heavy duty hose cut off saw; MILWAUKEE 2 ton electric chain hoist w/pendant controls; steel tables; GRACO & IR pumps; MILWAUKEE 12 amp mag drill, 350 rpm(new); CENTRAL MACHINERY 10 ton portable puller; (2) BOSCH BULLDOG EXTREME VSR roto hammers; B&D roto hammer; (5) FROMM rechargeable plastic banders; (2) FROMM pneumatic banders; FROMM & SIGNODE manual banders; (6) banding carts; banding tools; (6) MAKITA 1200BA 4” planers; MAKITA 9741 4” rough brush; (8) PORTER CABLE, MAKITA, & MILWAUKEE 4” belt sanders; sawzalls; palm sanders; routers; drills; air tools; tool boxes; air drives; floor jack; bottle jacks; car stands; creepers; slide hammer; clamps; hand tools; nuts; bolts; threaded rod; pneumatic & hydraulic hose; parts bins; air regulators; chain saw chain & repair tools; pipe fittings; spare bandsaw blades; extension cords; sanding belts; spare chain; bearings; staplers; welding wire & rod; portable lights; flammables cabinets; air hose reels; spare motors; gearheads; reducers; grease guns; air bags; cylinders; spare electrical; fire extinguishers; sawhorses; steel stock; sprockets; chain; couplers; approx 500 gallon waste oil tank; (2) EAGLE 1607 & (4) EAGLE 1605 drum stackers; spill pallets; step ladders; plastic banding; mill mirrors; lumber wrap; corners; belting; rolling warehouse ladder; B&D 6’x8’ modular poly building; rigging chains; infra red heaters; shop heaters

2004 WOODMIZER LT-70

1970 2010James G. Murphy Inc.www.murphyauction.com

425.486.1246 or 800.426.3008

(2) MORBARK CANT STACKERS

NO MINIMUMS - NO RESERVES*Scales-Bar Code Printers/ScannersPACIFIC TRUCK SCALES AVERY WEIGHTRONIX W125, 20,000 lb capacity,

4’x6’ platform scale, s/n: 036589PACIFIC TRUCK SCALES AVERY WEIGHTRONIX DSL7248-10, 10,000 lb

capacity, 4’x6’ platform scale, s/n: 55479(6) SATO GT480E barcode printersSATO barcode printerZEBRA ZFM-1 barcode printerPSC & RANGER hand held scanners

Saw Sharpening & Grinding Equipment2007 ACME BSA1100/ACME TALL BOY circle saw grinder, s/n: 13016FOLEY 357 top facer & relief, s/n: 133012HANCHETT DN40 travel bed knife grinder, s/n: 9296PSTIHL chain sharpener

Electrical2008 BENSHAW model RB2-1-S-180A15C,

100 hp redi-start solid state starter w/MX2 control, S/n: S200803194-1-1

BENSHAW RMB6-180-1, 150, 100 hp soft startsSIEMENS SIKO START 3RW34, 100 hp starter(3) 2007 CH EATON SV9000 adjustable frequency drivesSQUARE D model 6, 5-section MCC w/(22) switchesALLEN BRADLEY 2-section MCC w/(16) switchesALLEN BRADLEY 2-section MCC w/(9) switchesCUTLER HAMMER 2-section MCC w/(9) switches

Trash Compactor-Self Dumpers-Fuel TankWASTE QUIP approx 40 yard trash compactor, s/n: D15364(13) Approx 2 to 1/2 yd self dumping hoppers2002 WELBUILT, 1000 gallon diesel tank w/TUTHILL FR700 pump, s/n:

UL142-A53474

Timber Racks-Transfers-Conveyors-Rollcases-Miscellaneous Shop & StoresHuge assortment of bolt together & welded double & single sided timber racks,

65’, 40’ green chain, H78 transfers to 22’, powered rollcases to 96’ belt conveyors to 36’; PLUS: New CHAMPION 7000W generator; (2) MILLER TRAILBLAZER welder generators; LINCOLN Power Mig welder; MILLER SPECTRUM 625DC plasma cutting system; (2) oxy/acetylene sets; STIHL gas chain saws; (3) STIHL electric chain saws; STIHL gas chop saw; (3) GRIZZLY 14” bandsaws; GRIZZLY 12” bandsaw; (2) DELTA 12” bandsaws; 2007 HEMA ZS20 12” heavy duty portable bandsaw; MAKITA 16-5/16” beam saw; WOODTEK oscillating edge sander; GRIZZLY 6” tilt table spindle shaper; MIKIWAY TS1212, 12” tilting tale saw w/BIESSEMEYER fence; DEWALT DW375 6”x13” planer; CENTRAL MACHINE, JET 20” drill presses; LODGE & SHIPLEY 12”x36” engine lathe; ELLIS miter bandsaw; SUNEX 50 ton hydraulic shop press; parts washer; MAXUS 1 hp tank mounted air compressor; 2004 PARKER PHAST KRIMP crimper; CHICAGO ELECTRIC 14” heavy duty hose cut off saw; MILWAUKEE 2 ton electric chain hoist w/pendant controls; steel tables; GRACO & IR pumps; MILWAUKEE 12 amp mag drill, 350 rpm(new); CENTRAL MACHINERY 10 ton portable puller; (2) BOSCH BULLDOG EXTREME VSR roto hammers; B&D roto hammer; (5) FROMM rechargeable plastic banders; (2) FROMM pneumatic banders; FROMM & SIGNODE manual banders; (6) banding carts; banding tools; (6) MAKITA 1200BA 4” planers; MAKITA 9741 4” rough brush; (8) PORTER CABLE, MAKITA, & MILWAUKEE 4” belt sanders; sawzalls; palm sanders; routers; drills; air tools; tool boxes; air drives; floor jack; bottle jacks; car stands; creepers; slide hammer; clamps; hand tools; nuts; bolts; threaded rod; pneumatic & hydraulic hose; parts bins; air regulators; chain saw chain & repair tools; pipe fittings; spare bandsaw blades; extension cords; sanding belts; spare chain; bearings; staplers; welding wire & rod; portable lights; flammables cabinets; air hose reels; spare motors; gearheads; reducers; grease guns; air bags; cylinders; spare electrical; fire extinguishers; sawhorses; steel stock; sprockets; chain; couplers; approx 500 gallon waste oil tank; (2) EAGLE 1607 & (4) EAGLE 1605 drum stackers; spill pallets; step ladders; plastic banding; mill mirrors; lumber wrap; corners; belting; rolling warehouse ladder; B&D 6’x8’ modular poly building; rigging chains; infra red heaters; shop heaters

Rolling Stock2005 COMBI-LIFT CL60100LA54, 10,000 lb capacity side loader, approx 24’ lift, 48”

extendable forks, GM 3 liter, 4-cylinder gas engine, 8288 hrs, s/n: 5941 1990 BAUMAN type AS-40-14-75, 4000 lb capacity side loader, approx 24’ lift, 48”

extendable forks, PERKINS diesel engine, s/n: 3505(4) HYSTER H135XL forklifts, 13,500 lb capacity, propane, dual pneumatic tires,

212” 2-stage masts w/48” forks, side shift, ROPS, s/n’s: F006D06149X, F006D05634X, F006D03425T, F006D03424T

(3) HYSTER H110XL2 forklifts, 11,000 lb capacity, propane, dual pneumatic tires, 156-1/2” 2-stage masts w/48” forks, side shift, ROPS, s/n’s: G005D08859T, G005D08829T, G005D05824N

(2) 2000 LINDE H60D-02 forklifts, 12,000 lb capacity, diesel, dual pneumatic tires, 220” 2-stage masts w/48” forks, side shift, s/n’s: E1X353M0142160, E1X353M0142060

HYSTER H80E forklift, 8000 lb capacity, propane, dual pneumatic tires, 199” 2-stage mast w/48” forks, side shift, s/n: D005D03023F

HYSTER S40C forklift, 4000 lb capacity, propane, solid tires, 167-1/2” 3-stage mast w/40” forks, s/n: C002D1690U

TENNANT model 275 sweeper, CONTINENTAL 4-cylinder gas engine, 7828 hrs, s/n: HD3151

1977 GMC C60 dual wheel flatbed truck, gas, manual trans, 20’ steel bed w/headache & lumber rack, 29,782 miles

(6) CLUB CAR golf carts(3) EZ-GO golf carts

TERMS & CONDITIONS

10% BUYERS PREMIUM PAYMENT: Full payment must be made by no later than 4pm, Wednesday,

November 10.A 25% deposit is required by the close of business, auction day.Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or

company checks accepted ONLY with bank letter of guarantee.Absentee bids accepted with 25% depositREMOVAL: No purchase may be removed during the auction unless otherwise

announced by the auctioneer. Removal schedule announced on auction day.

Announcements made by the auctioneer at the time of sale take precedence over printed matter.

Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.

Due to safety & insurance reasons, persons under 12 not admitted.

Washington Auctioneers License #1960

DRIVER DIRECTIONS

From east or westbound Hwy 99W in McMinnville, drive to NE Lafayette Ave. Drive south on NE Lafayette Ave approximately 6/10 mile to NE Orchard Ave. Turn left and drive east on Orchard approximately 4/10 mile to the auction site, located on the right.

Food Service Available at the Auction Site

HYSTER H135XL

SELECT SPECIALTIES 4221

BAKER AX BBR-O

By Order of Receiver

2700 Orchard Ave McMinnville, OR

James G. Murphy Inc.Commercial & Industrial Auctioneers

PUBLIC AUCTION

Reman Plant, Rolling Stock

NO MINIMUMS - NO RESERVES*

FIRST CLASS

FIRST CLASS MAILU.S. POSTAGE PAID

BOTHELL, WAPERMIT No. 103

James G. Murphy Inc.Commercial & Industrial AuctioneersP.O. Box 82160, Kenmore, WA 98028

Tuesday - Nov. 9, 2010 - 9am

FOREST GROVE LUMBER

FOREST GROVE LUMBER