jamaica cottage shop, inc. -dpdlfd &rwwdjh 6krs ,qf · jamaica cottage shop, inc. 170 winhall...

Jamaica Cottage Shop, Inc. 170 Winhall Station Road S. Londonderry, VT 05155Voice 802-297-3760 Fax 802-297-2825 [email protected]

www.JamaicaCottageShop.comPage 7

8x8 Vermonter – Materials List

Material list Two 4x6x8 skids Fifteen 2x4x8’ floor joists, rim joists, wall framing Five 2x4x10’ rafters Four 4x4x12 posts, braces Two 4x4x8 beams 100 square feet of floorboards, optional four sheets ¾” plywood 100 square feet of roofing material, wood shingles, metal, asphalt, slate 300 board feet of random width and length 1” rough sawn boards, roofing, doors, trim, ridge and temporary bracing Add another 100 board feet if roof is to be sheathed solid rather than strapped, optional Optional one wooden louvered vent approximate size 14”x16” Three 1x6x10 Pressure treated Ramp Decking Four black 8” T hinges with screws Black Turn Latch National Hardware N 237- 529 Foot Bolt National Hardware N 150 – 771 Chain Bolt Nails 4lbs 3 1/2" spikes (16’s) 4lbs 2 3/8” galvanized (6’s) Corrugated Metal Roofing choice of color Six sheets @ 56” 123” of matching ridge cap 125 1 ½” wood grip screws with rubber gasket

An allowance for mistakes and waste has been included

Suggested Tools Skill Saw or Hand saw Saw-z-all or chain saw Hammer Nail puller (cats paw or crow bar) 25’ tape measure Chalk line Extension Cord Tin Snips Staple gun

PencilSpeed Square Four-foot level Cordless Drill ¼” drive bit for drill #2 Phillips #3 Square DriveRazor Knife Chisel

Contact us today to purchase a Hardware Package to match this

set of plans.

Please contact us with any mistakes or discrepancies in these plans. We strive

to provide our clients with a quality product and encourage feedback.

Hardware Package


www.JamaicaCottageShop.com

8x10 Vermont Shed-Option AMaterial List



8x12 Vermonter Materials List

Material listTwo 4x6x12 skidsSeven 2x4x92” floor joists, wall framingTwo 2x4x12 Rim Joists, raftersFive 4x4x12 posts, beams, bracesTwo 4x4x12 beams120 square feet of floorboards, optional four sheets ¾” plywood200 square feet of roofing material, wood shingles, metal, asphalt, slate300 board feet of random width and length 1” rough sawn boards, roofing, doors, trim, ridge and temporary bracingAdd another 100 board feet if roof is to be sheathed solid rather than strapped, optional Optional one wooden louvered vent approximate size 14”x16”Three 1x6x10 Pressure treated Ramp DeckingFour black 8” T hinges with screws

National Hardware N 158 – 204 Door/Gate LatchNational Hardware N 237- 529 Foot BoltNational Hardware N 150 – 771 Chain Bolt

Nails 5lbs 3 1/2" spikes (16’s) 5lbs 2 3/8” galvanized (8’s) Corrugated Metal Roofing choice of color

Ten sheets @ 65”150” of matching ridge cap300 1 ½” wood grip screws with rubber gasket


Suggested ToolsSkill Saw or Hand sawSaw-z-all or chain sawHammerNail puller (cats paw or crow bar)25’ tape measureChalk lineExtension CordTin SnipsStaple gun

PencilSpeed SquareFour-foot levelCordless Drill¼” drive bit for drill#2 Phillips#3 Square DriveRazor KnifeChisel


set of plans.



Hardware Package



8x14 Vermonter Materials ListMaterial listTwo 4x6x14’ skidsEighteen 2x4x8’ floor joists, wall framingTwo 2x4x14’ Rim Joists, raftersSix 4x4x12 posts, beams, bracesTwo 4x4x14 beams120 square feet of floorboards, optional four sheets ¾” plywood200 square feet of roofing material, wood shingles, metal, asphalt, slate300 board feet of random width and length 1” rough sawn boards, roofing, doors, trim, ridge and temporary bracingAdd another 100 board feet if roof is to be sheathed solid rather than strapped, optional Optional one wooden louvered vent approximate size 14”x16”Three 1x6x10 Pressure treated Ramp DeckingFour black 8” T hinges with screws

Black Turn LatchNational Hardware N 237- 529 Foot BoltNational Hardware N 150 – 771 Chain Bolt

Nails 8lbs 3 1/2" spikes (16’s) 8lbs 2 3/8” galvanized (6’s) Corrugated Metal Roofing choice of color

Ten sheets @ 56”150” of matching ridge cap125 1 ½” wood grip screws with rubber gasket



set of plans.



Hardware Package





8x16 Vermonter Materials List

Material list Two 4x6x16 skids Nine 2x4x92” floor joists, wall framingTwo 2x4x16 Rim Joists, rafters Ten 4x4x12 posts, beams, braces 120 square feet of floorboards, optional four sheets ¾” plywood200 square feet of roofing material, wood shingles, metal, asphalt, slate 300 board feet of random width and length 1” rough sawn boards, siding, doors, trim, ridge and temporary bracing Add another 100 board feet if roof is to be sheathed solid rather than strapped, optional Optional one wooden louvered vent approximate size 14”x16”Three 1x6x10 Pressure treated Ramp Decking Four black 8” T hinges with screws Black Turn Latch National Hardware N 237- 529 Foot Bolt National Hardware N 150 – 771 Chain Bolt Nails 6lbs 3 1/2" spikes (16’s) 6lbs 2 3/8” galvanized (6’s) Corrugated Metal Roofing choice of color Twelve sheets @ 56” 200” of matching ridge cap 125 1 ½” wood grip screws with rubber gasket



set of plans.



Hardware Package





10x8 Vermonter – Materials List Floor (Hemlock) (2) 4x6x8’ (8) 2x4x10’ (20) 1x6x10’

Walls (Hemlock) (2) 4x4x12’ (4) 4x4x10’ (5) 2x4x14’ (1) 2x4x10’

Roof (Hemlock) (6) 2x4x12’ (2) 1x6x8’ (6) 1x4x10’ (1) 1x6x10’ Pine

Siding (Pine) (10) 1x12x12’ (4) 1x12x14’ (3) 1x12x16’ (2) 1x6x10’

Trim (Pine) (4) 1x6x12’ (1) 1x4x6’ (5) 1x6x12’ (rip to 1x3) (1) 1x4x12’ (rip to 1x2)

Extra (Hemlock) (1) 2x4x8’ (2) 1x4x10’ (4) 1x4x8’ (2) 1x6x10’ Pine

Optional one wooden louvered vent approximate size 14”x16” Three 1x6x10 Pressure treated Ramp Decking Four black 8” T hinges with screws

National Hardware N 158 – 204 Door/Gate Latch National Hardware N 237- 529 Foot Bolt

National Hardware N 150 – 771 Chain Bolt Nails 6lbs 3 1/2" spikes (16’s) 6lbs 2 3/8” galvanized (6’s) Corrugated Metal Roofing choice of color Ten sheets @ 65” One abrasive metal cutting blade for a circular saw 150” of matching ridge cap 300 1 ½” wood grip screws with rubber gasket An allowance for mistakes and waste has been included

Pencil Speed Square Four-foot level Cordless Drill ¼” drive bit for drill #2 Phillips #3 Square Drive Razor Knife Chisel





set of plans.

Hardware Package



10x10 Vermonter – Materials List Floor (Hemlock) (2) 4x6x10’ (8) 2x4x10’ (20) 1x6x10’

Walls (Hemlock) (2) 4x4x12’ (4) 4x4x10’ (5) 2x4x14’ (1) 2x4x10’

Roof (Hemlock) (6) 2x4x12’ (2) 1x6x8’ (6) 1x4x10’ (1) 1x6x10’ Pine

Siding (Pine) (10) 1x12x12’ (4) 1x12x14’ (3) 1x12x16’ (2) 1x6x10’

Trim (Pine) (4) 1x6x12’ (1) 1x4x6’ (5) 1x6x12’ (rip to 1x3) (1) 1x4x12’ (rip to 1x2)

Extra (Hemlock) (1) 2x4x8’ (2) 1x4x10’ (4) 1x4x8’ (2) 1x6x10’ Pine

Optional one wooden louvered vent approximate size 14”x16” Three 1x6x10 Pressure treated Ramp Decking Four black 8” T hinges with screws National Hardware N 158 – 204 Door/Gate Latch National Hardware N 237- 529 Foot Bolt National Hardware N 150 – 771 Chain Bolt Nails 6lbs 3 1/2" spikes (16’s) 6lbs 2 3/8” galvanized (6’s) Corrugated Metal Roofing choice of color Ten sheets @ 65” One abrasive metal cutting blade for a circular saw 150” of matching ridge cap 300 1 ½” wood grip screws with rubber gasket An allowance for mistakes and waste has been included






set of plans.

Hardware Package



10x12 Vermonter – Materials List

Material list Two 4x6x12 skids Ten 2x4x10 floor joists, wall framing Ten 2x4x12 Rim Joists, rafters, nailers Five 4x4x12 beams, braces Three 4x4x10 posts 120 square feet of floorboards, optional four sheets ¾” plywood 200 square feet of roofing material, wood shingles, metal, asphalt, slate 300 board feet of random width and length 1” rough sawn boards, roofing, doors, trim, ridge and temporary bracing Add another 100 board feet if roof is to be sheathed solid rather than strapped, optional Optional one wooden louvered vent approximate size 14”x16” Three 1x6x10 Pressure treated Ramp Decking Four black 8” T hinges with screws Black Turn Latch National Hardware N 237- 529 Foot Bolt National Hardware N 150 – 771 Chain Bolt Nails 8lbs 3 1/2" spikes (16’s) 6lbs 2 3/8” galvanized (6’s) Corrugated Metal Roofing choice of color Ten sheets @ 68” One abrasive metal cutting blade for a circular saw 162” of matching ridge cap 300 1 ½” wood grip screws with rubber gasket An allowance for mistakes and waste has been included




Suggested Tools Skill Saw or Hand saw Saw-z-all or chain saw HammerNail puller (cats paw or crow bar) 25’ tape measure Chalk line Extension Cord Tin SnipsStaple gun


set of plans.

Hardware Package



10x14 Vermonter – Materials List Floor

(20) 1x6x14’ (10) 2x4x10’ (1) 2x4x8’

Walls (1) 2x4x8’ (5) 2x4x10’ (2) 2x4x12’ (3) 4x4x10’ (2) 4x4x8’ (2) 4x4x12’

Roof (8) 2x4x12’ (8) 1x4x14’ (1) 1x6x14’

Siding (5) 1x12x16’ (14) 1x12x12’ (2) 1x12x14’

Trim (5) 1x6x12’ (2) 1x6x16’ (2) 1x4x8’

Extra (1) 2x4x10’ (4) 1x4x8’ (4) 1x4x10’ (2) 1x12x8’

Add another 100 board feet if roof is to be sheathed solid rather than strapped, optional Optional one wooden louvered vent approximate size 14”x16” Three 1x6x10 Pressure treated Ramp Decking Four black 8” T hinges with screws National Hardware N 158 – 204 Door/Gate Latch National Hardware N 237- 529 Foot Bolt National Hardware N 150 – 771 Chain Bolt Nails 10lbs 3 1/2" spikes (16’s) 7lbs 2” galvanized (6’s) Corrugated Metal Roofing choice of color Ten sheets @ 65” One abrasive metal cutting blade for a circular saw 150” of matching ridge cap 300 1 ½” wood grip screws with rubber gasket An allowance for mistakes and waste has been included






set of plans.

Hardware Package



10x16 Vermonter – Materials List Material list Two 4x6x16 skids Eleven 2x4x10 floor joists, wall framing Eleven 2x4x12 Rim Joists, rafters Six 4x4x12 posts, beams, braces Two 4x4x10 beams 160 square feet of floorboards, optional four sheets ¾” plywood 250 square feet of roofing material, wood shingles, metal, asphalt, slate 300 board feet of random width and length 1” rough sawn boards, siding, doors, trim, ridge and temporary bracing Add another 100 board feet if roof is to be sheathed solid rather than strapped, optional Optional one wooden louvered vent approximate size 14”x16” Three 1x6x10 Pressure treated Ramp Decking Four black 8” T hinges with screws Black Turn Latch National Hardware N 237- 529 Foot Bolt

National Hardware N 150 – 771 Chain Bolt Nails 8lbs 3 1/2" spikes (16’s) 8lbs 2 3/8” galvanized (6’s) Corrugated Metal Roofing choice of color Twelve sheets @ 68” One abrasive metal cutting blade for a circular saw 208” of matching ridge cap 350 1 ½” wood grip screws with rubber gasket An allowance for mistakes and waste has been included






set of plans.

Hardware Package



10x20 VermonterMaterial List

Floor- Hemlock

Walls-Hemlock

Siding-Pine

Roof-Hemlock

Trim-Pine

Temp Bracing/ Extra Lumber

Hardware

Millwork

Suggested Tools

Snips

jamaica cottage shop, inc. -dpdlfd &rwwdjh 6krs ,qf · jamaica cottage shop, inc. 170 winhall...

Documents