Resume

J.A. ROMAGNOLI

Gordon & Mary Cain Chair Professor M. Gautreaux/Ethyl Chair Professor Of Process Systems Engineering

LABORATORY FOR PROCESS SYSTEMS ENGINEERING

Department of Chemical Engineering

Louisiana State University

Baton Rouge LA 70803 USA

www.pseonline.net

Tel: (225) 578-1377 FAX: (225) 578-1476

e-mail: jose@lsu.edu

2

PERSONAL INFORMATION

Languages: Spanish, English, Italian

EDUCATIONAL BACKGROUND

Chemist, National University of the South, Argentina, September 1973.

Chemical Engineer, National University of the South, Argentina, September 1973.

PhD, University of Minnesota, United States, August 1980.

MAJOR AREAS OF RESEARCH INTEREST

Areas of interest include all aspects of Process Systems Engineering, with special focus

on:

Advanced Multi-scale Modelling Architectures for Complex Processes.

Advanced Multiresolution Image Analysis and Characterization Techniques

Design and Synthesis with Economic-Environmental-Operability Considerations.

Intelligent Data Processing, Reconciliation and Monitoring

Advanced Process Control

Enterprise-Wide Optimization

COURSES TAUGHT

Undergraduate

Process Dynamic & Control (Present)

Advanced Process Systems Engineering (Present)

Process Data Management (Past)

Application of Mass Transfer. (Past)

Heat Transfer. (Past)

3

Laboratory of Unit Operations (Past)

Graduate

Advanced process Monitoring (Present)

Advanced Process Control. (Present)

Robust Process Control (Past)

Numerical Methods for Differential/Algebraic Systems (Past)

Industrial

Distributed Control Systems: Applications

Data Processing, Reconciliation and Process Monitoring

Advanced Industrial Process Control: Training for world class operation

Five days industrial course

Operator Training Module

Three days industrial training course.

PROFESSIONAL EXPERIENCES

Gordon & Mary Cain Chair Professor of Process Systems Engineering, Louisiana

State University (2005-to date)

Distinguish Visiting Professor, University of Cagliari, Italy (2008, 2009, 2010)

Visiting Professor, Department of Chemical Engineering, NTU, Singapore (Fall

2006)

Visiting Professor, Singapore Institute for Advanced Manufacturing, Singapore (Fall

2004)

Chair & Professor of Process Systems Engineering, University of Sydney (2000-

2005)

Head of Department, Chemical Engineering Department, University of Sydney

(2001-2002).

Senior Consultant, Visy Pulp and Paper, Australia (2000-2004).

Member International Advisory Board, Institute for Chemical and Engineering

Science (ICES), Singapore, 2001-2003

4

Senior Consultant, Huntsman Co. Australia (1999-2005)

Orica Chair of Process System Engineering. University of Sydney (1997- 2000).

ICI Chair of Process System Engineering. University of Sydney (1991- 1997)

Senior Consultant, ICI Engineering Australia (1991-1999)

Principal Researcher, CONICET - National Research Council of Argentina (1985-

1991)

Full Professor at the Department of Chemical Engineering of the National University

of the South, Argentina (1984-1991)

Supervisor Process Control Research Work Team of PLAPIQUI (Planta Piloto de

Ingenieria Quimica), Argentina (1980-1991)

Visiting Professor at the University of Minnesota 1987-1988

Visiting Professor at the University of California Davis 1988-1989

Visiting Professor at the University of California Davis, Winter 1990

Consultant for the United Nations, Salvador Bahia (Brazil), 1986

Associate Professor at the Department of Chemical Engineering of the National

University of the South, Argentina (1980-1984)

Independent Researcher, CONICET - National Research Council of Argentina (1980-

1985)

AWARDS

Donald W. Clinton Mentor Award, College of Engineering, :Louisiana State

University (2013)

Awarded the 2008 PSE Model-Based Innovation Prize for the paper, “Model-based

optimal strategies for controlling particle size in antisolvent crystallization

operations” (2008)

Donald W. Clinton Mentor Award, College of Engineering, :Louisiana State

University (2008)

Awarded the John Brodie medal for contributions to Chemical Engineering, Institute

of Chemical Engineers, Australia (2005)

5

Awarded the Centenary Medal of Australia by the Prime Minister for contributions

to the field of Chemical Engineering (2003)

Elected Fellow, Australian Academy of Technological Sciences and Engineering for

contributions to the field of Process Systems Engineering (1999).

Fellow of the Institution of Engineers, Australia (1996)

Worldwide ICI Award for Innovation, Creativity and Excellence in Engineering (1995).

Award for best innovation work within the Plastics Division at Orica Botany Site

(1997).

STUDENTS SUPERVISION

1. J. Gatica, “Parameter estimation in chemical reactions”, M.S. Thesis, National

University of the South (Argentina), Completed (1983). Currently Associate

Professor at Cleveland State University, USA.

2. G. Lagar, “Solving stiff differential systems for dynamic distillation problems”,

M.S. Thesis, National University of the South (Argentina), Completed (1983).

Currently at Polisur as a Senior Control Engineer.

3. S. Tonelli, “Dynamic modelling and control of industrial multiple effect

evaporators”, PhD Thesis, National University of the South (Argentina),

Completed (1985). Currently at National Council of Research Argentina as a

Research Fellow.

4. A Bandoni, “Optimisation under uncertainty”, PhD Thesis, National University of

the South (Argentina), Completed (1986). Currently at the National University of

the South as an Associate Professor.

5. B. Brignole, “Dynamic and Control of Distillation Trains”, PhD Thesis, National

University of the South (Argentina), Completed (1987). Currently at the University

National of the South Argentina as Associated Professor.

6. O. Agamennoni, “Design of robust controllers for multivariable systems:”, PhD

Thesis, National University of the South, (Argentina), Completed (1991). Currently

at the University National of the South as Associated Professor and Head of the

Electrical Engineering Department.

7. J. Figueroa, “Design of reduced complexity controllers with joint specifications of

robust stability and performance”, PhD Thesis, National University of the South,

6

(Argentina), Completed (1991). Currently at the National University of the South

Argentina as Associated Professor.

8. N. Sunarto, “The effect of disturbances on the operation of chemical processes”,

M.S. Thesis, University of Sydney, Completed (1994). Currently at Aspen Tech.,

Indonesia.

9. A. Nooraii, “Implementation of advanced operational techniques for an

experimental distillation column within a DCS environment”, PhD Thesis,

University of Sydney (Australia), Completed (1995). Currently at Alcoa Ltd. as a

Senior Control Engineer.

10. P. Barhi, “A new integrated approach for operability analysis of chemical plants”,

PhD Thesis, University of Sydney (Australia), Completed (1995). Currently at

Murdock University as a Professor.

11. A. Safavi, “Wavelet based neural networks and multi-resolution analysis with

applications”, PhD Thesis, University of Sydney (Australia), Completed (1995).

Currently at the University of Shiraz, Iran as Associate Professor.

12. M. Sanchez, “Classification of process variables and data reconciliation for

chemical plants”, PhD Thesis, National University of the South, (Argentina),

Submitted (1996). Currently at the National Research Council Argentina as a

Associate Professor.

13. G. Sentoni, “Approximate models for nonlinear process control”, PhD Thesis,

National University of the South, (Argentina) Completed (1996). Currently

Postdoctoral Fellow at Carnegie Mellon University, USA.

14. S. Norquay, “Nonlinear model predictive control using Wiener models”, PhD

Thesis, University of Sydney, Completed (1997), Currently at ICI Engineering.

15. J. Chen, “Robust statistical Process Monitoring”, University of Sydney, PhD

Thesis, , Completed (1997). Currently Researcher at CSIRO Division of Food

Engineering.

16. L. Vu, “Joint switchability and operability analysis in chemical process operation”,

PhD Thesis, University of Sydney, Completed (1998). Research Associate,

University of Western Sydney, Australia.

17. J. Rodriguez, “Supervisory switching strategies for operating regime process

control”, PhD Thesis, University of Sydney, Completed (1999), Currently

Honeywell, Netherland.

18. F Azimzadeh, “Operating regime modelling of batch processes”, PhD Thesis,

University of Sydney, , Completed (2000)

7

19. O. Galan-Domingo, “Nonlinear process control using multiple models”, PhD

Thesis, University of Sydney, Completed (2000). Currently ABB Automation,

Australia

20. D. Wang, “Robust Estimation/Identification for Process Control”, PhD Thesis,

University of Sydney, Completed (2000), Currently Researcher at the Singapore

Institute for Chemical and Engineering Sciences

21. A. Bakhtazad, “Process Trend Analysis Using Wavelet “, PhD Thesis, University

of Sydney, Completed (2000), Currently at Invensys, Australia

22. D. Leung, “Operator support systems for process operation”, PhD Thesis,

University of Sydney, Completed (2001), Currently Visy Pulp and Paper, Australia

23. T. Murphy, “Development and implementation of virtual operator training

module”, MS Thesis, University of Sydney, Completed (2000), Currently at

Huntsman Co., Australia

24. S. Khuu, “Optimal operation and control of industrial surfactant reactors”, PhD

Thesis, University of Sydney, Completed (2001), Currently at Boral Co., Australia

25. P. Hassan, “Wavelet approach in process identification and control”, PhD Thesis,

University of Sydney, Completed (2002), Currently at ABB Automation, Australia 26. T. Apelt, “Advanced operation, control and optimisation of grinding operations”,

PhD Thesis, University of Sydney, Completed (2002)

27. J. Zeaiter, “Simulation, Optimisation and Control of Emulsion Polymerisation

Reactors”, PhD Thesis, University of Sydney, Completed (2002) Currently at

Invensys, Australia 28. N. Jabiri,” An environment for PSE learning through the Web”, MS Thesis,

University of Sydney, Completed (2003) 29. H. Alhammadi, “An integrated approach for process design and analysis”, PhD

Thesis, University of Sydney, Completed (2003). Currently at University of

Bahrain

30. A. Abbas, “Simulation, Optimisation and Control of Crystallization Processes”,

PhD Thesis, University of Sydney, Completed (2004). Currently at University of

Sydney

31. P. Rolandi, “Advanced operation of industrial digesters for pulp and paper

processes”, PhD Thesis, University of Sydney, Completed (2005) Currently at PSE

UK

8

32. B. Alhamad, “Optimal operation and control of co-polymerization reactors”, PhD

Thesis, University of Sydney. Completed (2005). Currently at University of

Bahrain

33. H. Maulud. “Monitoring of Batch Process via Nonlinear Multi-resolution

Projection Techniques”, PhD Thesis, University of Sydney, Completed (2006)

34. R. Elgebramd, “Studies on shear induced coagulation in polymerization processes

using CFD”, PhD Thesis, University of Sydney, Completed (2007) Currently at

PSE UK

35. M. Estrada, “Systematic model-centric strategy for the formulation of advanced

nanometric multi-layers materials”, MS Thesis, LSU, Completed (2007)

36. M. Nowee. “Model-based Optimal Operational Policies of Crystallization

Processes”, PhD Thesis, University of Sydney, Completed (2007)

37. B. Bhushan, “Self- Constructing and Organizing Neural Network Based Fuzzy

Clustering Technique and its Application to Fault Diagnosis”, PhD Thesis,

University of Sydney, Completed (2007)

38. J. Khorat, “Advanced Image Analysis Techniques for Particle Characterization”,

PhD Thesis, University of Sydney, Completed (2008)

39. D. Aragon, “Model-Centric Technologies for Support of Manufacturing

Operations”, PhD Thesis, LSU, Completed (2009)

40. S. Pakalapati, “Environmental Monitoring via Advanced Statistical Techniques”,

PhD Thesis, LSU, Completed (2009)

41. R. Mukherjee, “Multi-resolution Analysis and Characterization of Microscopy

Images to Study Molecular Interfaces”, PhD Thesis, LSU, Completed (2010)

42. C. Yela, “A Real-time Framework for Refinery Optimization”, Ms Thesis, LSU,

Completed (2009)

43. D. Widenski, “Modelling and Control of Antisolvent Crystallization Operations”,

PhD Thesis, LSU, Completed (2012)

44. P. Sharma, “Life Cycle Modelling, Design, and Optimization of Sustainable

Bioproduct Value Chains under Uncertainty”, PhD Thesis, LSU, Completed (2012)

45. B. Zhang, “Analysis and Characterization of Nanoscale Structures”, PhD Thesis,

LSU, Completed (2013)

9

46. G. Robertson, “Advanced and Novel Modelling Techniques for Simulation,

optimization and monitoring chemical engineering tasks with refinery and

petrochemical unit applications“, PhD Thesis, LSU, Completed (2014)

47. A. Geraili Nejadfomeshi, “Techno-economic analysis of multiproduct

biorefineries”, PhD Thesis, LSU, Completed (2015)

48. N. Ghadipasha, “Novel stochastic formulation for the prediction of CSD in

antisolvent crystallization processes”, PhD Thesis, LSU, In Preparation

49. M. Thomas, ”Smart/Intelligent Process Monitoring Strategies”, PhD Thesis, LSU,

In preparation

50. O. Dogu, “Agent-based platform for implementing Intelligent support systems”,

MS Thesis, LSU, Completed 2014

51. J. Chebeir, “Scheduling and planning of refineries operations”, MS Thesis, LSU,

Completed (2015). PhD Thesis, LSU “Modelling , Optimization and Planning of

Natural Gas Production Facilities”, In Preparation

52. S. Salas, “ Modelling and Optimization of Gas Processing Plants” MS Thesis,

LSU, In Preparation

53. Elizabeth Southerland, “Modelling, Optimization and Advanced Control of

Polymerization Units”, PhD Thesis, LSU, In Preparation

10

PUBLICATIONS

A. BOOKS, CHAPTERS AND THESIS

1 "Reaction injection moulding", Castro, J.M. and Romagnoli, J.A., One chapter in

Developments in Plastic Technology 2, Applied Science Publishers Limited

(1985).

2 "Studies of optimal measurement selection and data reconciliation for chemical

process monitoring and control", Romagnoli, J.A., PhD Thesis, University of

Minnesota, August (1980).

3 "A general approach to classify operational parameters and rectify measurement

errors for complex chemical processes", Romagnoli, J.A. and Stephanopoulos,

G., Advances in Chemical Engineering, Chapter 7 (1980).

4 “ Data processing and reconciliation for chemical process operation”, J.A.

Romagnoli, M. Sanchez, Book , Academic Press International, ISBN 0-12-

594460-8 (2000)

5 G. Stephanopoulos, J.A. Romagnoli, .S. Yoon, Editors, Proceedings- 4th

. IFAC

On-line Fault Detection and Supervision in the Chemical Industries, Jejudo

Island, Korea, June 7-8 (2001)

6 ”Fault Diagnosis Methodologies for Process Operations”, Leung D, J.A.

Romagnoli, Software Architectures and Tools for Computer Aided Process

Engineering, Chapter 6, Elsevier (2002).

7 Process Design and Operation: Incorporating environmental, profitability, heat

integration and controllability considerations”, H. Alhammadi, J.A. Romagnoli,

The Integration of Process Design and Control, Chapter B2, Elsevier (2004)

8 “Introduction to Process Control”, J.A. Romagnoli, A. Palazoglu, Textbook, CRC

Press-Taylor & Francis, ISBN 0849334969 (2005)

9 “An intelligent /smart framework for real-time process monitoring and supervision”,

B. Bhushan, J. A. Romagnoli , Modeling, Control, Simulation, and Diagnosis of

Complex Industrial and Energy Systems, Chapter 10, ISA/O3neida series (2009)

10 “Wavelet analysis of images from scanning probe and electron microscopy”, A.

Palazoglu, J.A. Romagnoli, P. Stroeve, Microscopy: Science, Technology,

Applications and Education Microscopy, Book Series – 2010 Edition

11

11 “Modelling and Multi-resolution Characterization of Micro/nano Surface: for Polymer

Thin Films and Interfaces”, R. Mukherjee, J. A. Romagnoli, VDM Verlag, ISBN-10:

3639266129, ISBN-13: 978-3639266122 (2010)

12 “Modelling of Crystallization Processes, in Process Systems Engineering”, Abbas A.,

J. Romagnoli and D. Widenski, Vol. 7 Dynamic Process Modeling. Editors: M.C.

Georgiadis, J.R. Banga, E.N. Pistikopoulos, Wiley-VCH Verlag GmbH & Co.

Weinheim (2011)

13 “Introduction to Process Control: 2nd

Edition”, J.A. Romagnoli, A. Palazoglu,

Textbook , CRC Press-Taylor & Francis, ISBN 0849334969 (2012)

14 “ Modelling and Control of Polymerization Reactors”, Zeaiter J., Romagnoli J.A.,

Chapter 10, Monitoring Polymerization Reactions: From Fundamentals to

Applications, Editors: W. F. Reed, A. M. Alb, Wiley, ISBN: 978-0-470-91738-1

(2013)

B PUBLICATIONS IN JOURNALS

15 "On the rectification of measurement errors for complex chemical plants",

Romagnoli, J.A., Stephanopoulos G., Chemical Engineering Science, Vol. 35, pp.

1067-1081 (1980)

16 "Variable measurement structures for process control", Romagnoli, J.A., Alvarez,

J. and Stephanopoulos, G., International Journal of Control .Vol. 33, No. 2, pp.

269-289 (1981)

17 "Rectification of processes measurement data in the presence of gross errors",

Romagnoli, J.A., and Stephanopoulos, G., Chemical Engineering Science, Vol.

36, No. 11, pp. 1849-1863 (1981)

18 "Variable measurement structure for control of a tubular reactor", Romagnoli,

J.A., Alvarez, J. and Stephanopoulos, G., Chemical Engineering Science, Vol.

36, No. 10, pp. 1965-1719 (1981)

19 "Strategy for the measurement structure selection in a fluid catalytic cracking unit

with continuous catalyst feed", Romagnoli, J.A., Alvarez, J. and Stephanopoulos,

G., Latin-American Journal of Chemical Engineering, Vol. 12, pp. 1-71 (1982)

20 "Estructura de medidas y control en procesos de separación", Gani, R.,

Romagnoli, J.A., Cuadernos del CAMAT, Santa Fe, Octubre (1982)

21 "On data reconciliation: constraint processing and treatment of bias", Romagnoli,

J.A., Chemical Engineering Science, Vol. 38, No. 7, pp. 1107-1117 (1983)

12

22 "Studies of distributed parameter systems: decoupling the state parameter

estimation problem", Romagnoli, J.A. and Gani, R., Chemical Engineering

Science, Vol. 38, No. 11 pp. 1831-1843 (1983)

23 "Predicting conversion using temperature as the measured variable in the RIM

process. part I: simulation and measurement structure", Romagnoli, J.A. and

Castro, J.M., Polymer Engineering and Science, Vol. 23, No. 2, pp. 105-112

(1983)

24 "Predicting conversion using temperature as the measured variable in the RIM

process. part II: Implementation of the on-line corrective algorithm", Del Pino

O., Romagnoli, J.A., and Castro, J.M., Polymer Engineering and Science, Vol.

23, No. 16, pp. 895-901 (1983)

25 "Adaptive Strategies for distillation column control", Del Pino O., Gani, R.,

Romagnoli, J.A. and Alvarez, J., ISA. Automatic Control Systems, pp. 639

(1983). Also published in Advances in Instrumentation, Vol. 38 (1983)

26 "User derived modules speed programming", Porras, J.A., Gatica, J., Romagnoli,

J.A. and Moretti, J.L., Oil and Gas Journal, March 12 (1984)

27 "The prediction of properties and its influence on the design and modelling of

super-fractionators", Hernandez, M.R., Gani, R., Romagnoli, J.A. and Brignole,

E., Foundations of Computed Aided Design, pp. 709-749, CACHE (1984)

28 "Control studies in an industrial apple juice evaporator", Lozano, J., Elustondo,

M.P. and Romagnoli, J.A., Journal of Food Science, 49 (1984)

29 "Comparison of numerical methods for the solution of transient problems in the

processing of reactive systems", Crespo, N., Castro, J.M. and Romagnoli, J.A.,

Mecanica Computational, Vol. 1, pp. 184 (1985).

30 "A simple algorithm for sensitivity and operability analysis of separation

processes", Brignole, E., Gani, R. and Romagnoli, J.A., I&EC. Process Design

and Development, 24, pp. 42-48 (1985).

31 "On-line implementation of a multi-channel estimator", Bortolloto, G., Urbicain,

M.J. and Romagnoli, J.A., Computers and Chemical Engineering, Vol. 9, No. 4,

pp. 351-357 (1985)

32 "Controller design for model-plant mismatch", Agamennoni, O., Desages, A. and

Romagnoli, J.A. and Karim, N., ISA. Automatic Control Systems No. 85.06684,

pp. 441-451 (1985). Also published in Advances in Instrumentation, Vol. 40,

Part I (1985)

13

33 "Sensitivity and operability analysis for separation processes", Romagnoli, J.A.,

Brignole, E. and Gani, R., Computers and Chemical Engineering, Vol. 9, pp. 418

(1986)

34 "Implementation of a failure detection-identification algorithm for dynamic

systems", Microcomputer Applications, Vol. 5, No. 2, pp. 124-128 (1986)

35 "Control studies in an extractive distillation process: simulation and

measurement structure", Gani, R., Romagnoli, J.A. and Stephanopoulos, G.,

Chemical Engineering Communications, Vol. 40, pp. 281-302 (1986)

36 "Diseño de controladores mutivariables robustos", Agamennoni, O., Desages, A.,

Romagnoli, J.A., Revista Telegráfica Electrónica, Vol. 75, pp. 783-790 (1986)

37 "Procesamiento continuo de polímeros reactivos: II producción de tubos sólidos",

Crespo, N., Castro, J.M. and Romagnoli J.A., Latín American Journal of

Chemical Engineering, 16, pp. 325-335 (1986)

38 "adaptive control scheme for SISO processes with delays", Agamennoni, O.,

Desages, A. and Romagnoli, J.A., Industrial Engineering Chemistry Research,

Vol. 26, No. 4 (1987).

39 "Numerical studies in solving dynamic distillation problems", Lagar, G., Paloschi

J., Romagnoli, J.A., Computers and Chemical Engineering, Vol. 11, No. 4, pp.

383-394 (1987).

40 "On the order reduction in frequency domain", Rotstein, H., Donate, E.P.,

Desages, A. and Romagnoli, J.A., Applied Modelling and Simulation of

Technological Systems, Elsevier Science Publisher, Eds. P. Borne & S. Tzafestas,

pp. 183-1909 (1987).

41 "Data processing for instrument failure detection in dynamical systems", Porras,

J.A. and Romagnoli, J.A., Applied Modelling and Simulation of Technological

Systems, Elsevier Science Publisher, Eds. P. Borne & S. Tzafestas, pp. 91-98

(1987).

42 "A joint experimental design procedure for parameter estimation", Gatica, J.,

Porras, J.A. and Romagnoli, J.A., Chemical Engineering Communications, Vol.

50, pp. 135-153 (1987).

43 "Controller design for model-plant parameter mismatch", Romagnoli, J.A. Karim,

N., Agamennoni, O. and Desages, A., IEE Proceedings Part D Control Theory

and Applications, Vol. 135, No. 2, pp. 157-164 (1988).

14

44 "Simulation modelling and optimal operation of an apple juice concentrate plant",

Bandoni, J.A., Rotstein, E. and Romagnoli, J.A., Journal of Food Engineering 7,

pp. 159-175 (1988).

45 "Robust controller design methodology for multivariable chemical processes",

Agamennoni, O., Desages, A. and Romagnoli, J.A., Chemical Engineering

Science, Vol. 43, No. 11, pp. 2937-2950 (1988).

46 "Observer design based on modal reduction techniques: application to distillation

columns", Gatica, J., Porras, J.A. and Romagnoli, J.A., Modelling and Simulation

of Systems, Breedveld, P., Baltzer, J.C. (Editors), Scientific Publishing Co.,

IMACS, pp. 361-365 (1989).

47 "On the statistical treatment of material balances", Desages, A., Bortolotto, G.

and Romagnoli, J.A., Latin American Applied Research, Vol. 18, pp. 31-42

(1988).

48 "Uncertainty in linear programming", Bandoni, A., Romagnoli, J.A., Numerical

and Applied Mathematics, Brezinski, C. (Editor), Baltzer, J.C., AG, Scientific

Publishing Co. IMACS pp. 635-640 (1989).

49 "Hopf bifurcation in a CSTR using characteristic loci", Colantonio. M.C.,

Moiola, J., Desages, A.C. and Romagnoli, J.A., Chemical Engineering Science,

Vol. 44, No. 3, pp. 595-602 (1989).

50 "Calculation of highly structured stability margins", Rotstein, H., Desages, A.C.

and Romagnoli, J.A., International Journal of Control, Vol. 49, No. 3, pp. 1079-

1092 (1989).

51 "Robustness analysis in reduced order controller", Rotstein, H., Desages, A. and

Romagnoli, J.A., IEEE. Transaction on Automatic Control, Vol. 34, No. 4, pp.

457-459 (1989).

52 "Steady and non-steady state modelling of tubular fixed bed reactors", Gatica, J.,

Porras, J., Errazu, A. and Romagnoli, J.A., Chemical Engineering

Communications, Vol. 78, pp. 73-96 (1989).

53 "Robust controller design methodology for multivariable chemical processes:

Structure perturbations", Agamennoni, O., Rotstein, H., Desages, A.C. and

Romagnoli, J.A., Chemical Engineering Science, Vol. 44, No. 11, pp. 2597-2605

(1989).

54 "Automatic tuning of PID controllers with finite time horizon", Bortolotto, G.,

Desages, A.C. and Romagnoli, J.A., Chemical Engineering Communications,

Vol. 86, pp. 17-29 (1989).

15

55 "Bifurcations and degeneracy in a CSTR with reactions ABC", Moiola, J.,

Colantonio, C., Desages, A.C. and Romagnoli, J.A., Chemical Engineering

Science, Vol. 45, No. 1, pp. 297-305 (1990).

56 "On the stability analysis of non-linear feedback systems", Khambanonda, T.,

Palazoglu, A. and Romagnoli, J.A., AIChE Journal, Vol. 36, No. 1, pp. 66-74

(1990).

57 "Necessary and sufficient conditions for robust stabilisation with fixed order

controllers", Rotstein, H., Bandoni, A., Desages, A. and Romagnoli, J.A., C-TAT

Control Theory and Advanced Technology, Vol. 6, No. 1, pp. 75-91 (1990).

58 "Mathematical programming with uncertainty: application to robust control",

Rotstein, H., Bandoni, A., Desages, A. and Romagnoli, J.A., Computers and

Chemical Engineering, Vol. 14, No. 4/5, pp. 373-379 (1990).

59 "Bifurcation analysis via feedback system theory", Moiola, J., Desages, A. and

Romagnoli, J.A., Chemical Engineering Science, Vol. 45, No. 7, pp. 1863-1874

(1990).

60 "Computer package for transient analysis of industrial multiple-effect

evaporators", Tonelli, S., Romagnoli, J.A. and Porras, J.A., Journal of Food

Engineering, Vol. 12, pp. 267-281 (1990).

61 "Computer aided analysis and control of a distillation train", Brignole, N.B.,

Brignole, E.A. and Romagnoli, J.A., Computer Applications in Chemical

Engineering, Ed. Bussemaker, H. T. and Iedema, P.D., Elsevier Science

Publishers, B.V., Amsterdam, pp. 171-176 (1990).

62 "On data reconciliation with simultaneous adjustment of measurements and

functional model coefficients", Bandoni, A., Desages, A., Brignole, E. and

Romagnoli, J.A., Computer Applications in Chemical Engineering, Ed.

Bussemaker, H. T. and Iedema P.D., Elsevier Science Publishers B.V.,

Amsterdam, pp. 369-374 (1990).

63 "Dynamic and control of a distillation train without recycle streams", Brignole,

B., Ruiz, C. and Romagnoli, J.A., Industrial Engineering Chemistry Research,

Vol. 29, No. 9, pp. 1875-1889 (1990).

64 "Optimisation under uncertainty in inequality constrained linear programs",

Bandoni, J., Romagnoli, J.A. and Rotstein, E., Latin American Applied Research,

Vol. 20, No. 3/4, pp. 189-204 (1990).

65 " Linear Programming with uncertainty: Application to an industrial apple juice

plant", A. Bandoni, J.A. Romagnoli, E. Rotstein, Latin American Applied

Research, Vol.20, No. 3/4, pp. 189-201 (1990).

16

66 "Computing bifurcation points via characteristic loci", Moiola, J., Desages, A.

and Romagnoli, J.A., IEEE Trans. on Automatic Control, Vol. 36, No. 3, pp.

358-362 (1991).

67 "Robust controller design methodology for multivariable chemical processes:

Stability and performance considerations", Figueroa, J., Agamennoni, O.,

Desages, A. and Romagnoli, J.A., Chemical Engineering Science, Vol. 46, No.

5/6, pp. 1299-1310 (1991).

68 Degenerate Hopf bifurcations via feedback system theory: higher order harmonic

balance", Moiola, J., Desages, A. and Romagnoli, J.A., Chemical Engineering

Science, Vol. 46, No. 5/6, pp. 1475-1490 (1991).

69 "A robust/cautious model predictive controller", Fruzetti, K., Palazoglu, A.,

Romagnoli, J.A. and McDonald, K., Journal of Process Control, Vol. 1, pp. 187-

196 (1991).

70 "Improved robustness measures in time domain", Rotstein, H., Figueroa, J.,

Desages, A. and Romagnoli, J.A., Latin American Applied Research, Accepted

(In Print).

71 "Application of higher-order bifurcation formulae", Colantonio, C., Padin, M.

Desages, A. and Romagnoli, J.A., IEEE Transaction Automatic Control, Vol. 36,

No. 6,, pp. 746-749 (1991).

72 "Catastrophes, bifurcations and degeneracy via feedback system theory", Moiola

J., Desages, A. and Romagnoli, J.A., Latin American Applied Research, Vol. 21,

No. 1, pp. 39-45 (1991)

73 "Robust characteristics polynomial assignment", Rotstein, H., Pena, R., Bandoni,

A., Desages, A. and Romagnoli, J.A., Automatica, Vol. 27, No. 4, pp.711-715

(1991).

74 "A transformation approach to nonlinear process control", Khambanonda, T.,

Palazoglu, A. and Romagnoli, J.A., AIChE Journal, Vol. 37, No. 7, pp. 1082-

1092 (1991).

75 "Highly structured stability margins for process control systems: a case study of

to decoupling control in distillation", Figueroa, J., Romagnoli, J.A., Desages, A.

and Palazoglu, A., Computers and Chemical Engineering, Vol. 15, No. 7, pp.

493-502 (1991).

76 "Optimal tuning of discrete PID controllers using Lyapunov direct method:

robustness analysis", G. Bortolotto, A. Desages, J.A. Romagnoli, Chemical

Engineering Communications, Vol. 109, pp. 7-18 (1991).

17

77 "Controller order reduction for process control systems", Figueroa, J., Romagnoli,

J.A., Desages, A. and Palazoglu, A., Computers and Chemical Engineering, Vol.

16, No. 6, pp. 593-603 (1992).

78 "A multivariable delay compensation scheme", Agamennoni, O. Desages, A. and

Romagnoli, J.A., Chemical Engineering Science, Vol. 47, No.5, pp.1173-

1185(1992).

79 "Approximate models for control of nonlinear systems", Paolini E., Romagnoli,

J.A., Desages, A. and Palazoglu, A., Chemical Engineering Science, Vol. 47, No.

5, pp. 1161-1171 (1992).

80 "Thermodynamic tuning in separation processes simulation and design", Urlic L.,

Bottini S., Brignole, E. and Romagnoli, J.A., Computers and Chemical

Engineering, Vol. 16, No., pp, (1992).

81 "PLADAT: a package for process variable classification and plant data

reconciliation, M. Sanchez, A. Bandoni, J.A. Romagnoli, Computers and

Chemical Engineering, Vol. 16, Suppl., pp. 499 (1992).

82 "Linearized dynamic model of an industrial low density polyethylene plant", S.

Schbib, S. Tonelli, E. Brignole, J.A. Romagnoli, Computers and Chemical

Engineering, Vol. 17, Suppl., pp. 323 (1992).

83 "Robust performance determination in the presence of plant uncertainties- a

polynomial approach", G. Bortolotto, A. Desages, J.A. Romagnoli, Computers

and Chemical Eng., Vol.16, Suppl., pp.173 (1992).

84 "Influence of cooling design on fixed-bed reactors dynamics", V. Bucalá, D.O.

Borio, J. Porras, J.A. Romagnoli, AIChE Journal, Vol.38,No. 12,pp. 1990-1994

(1992).

85 "An algorithm for controller reduction with performance and stability

requirements", Rotstein, H., Figueroa, J., Desages, A. and Romagnoli, J.A.,

Control theory and Advanced Technology, Vol. 9, No. 3, pp. 671-689 (1993).

86 "Artificial neural networks in process modelling and control", Romagnoli J.A.,

Process and Control Engineering, Vol.6, No. 3, pp.69-71 (1993).

87 "DICOF: A package for multivariable controller design in frequency domain",

Agamennoni O., Romagnoli J.A., CACHE, Vol. 36, pp.15-17 (1993)

88 "Non-linear data reconciliation for an industrial pyrolysis reactor", K. Islam, G.

Weiss, J.A. Romagnoli, Computers and Chemical Engineers, Vol.18, Suppl.,

pp.217-221 (1994)

18

89 "On optimising control and the effect of disturbances: calculation of the open-

loop back-offs, A. Bandoni, G. Barton, J.A. Romagnoli, Computers and

Chemical Engineering, Vol.18, Suppl., pp.505-509 (1994)

90 "Dynamic and control of an industrial hydrogenation reactor", S. Schbib, A.

Errazu, J.A. Porras, J.A. Romagnoli, Computers and Chemical Engineering,

Vol.18. Suppl., pp. (1994)

91 "On the design of simpler robust de-couplers with joint stability and performance

specifications", J. Figueroa, G. Barton, J.A. Romagnoli, Computers and

Chemical Engineering , Vol. 18, No. 5, pp. 415-425 (1994)

92 "Advanced control strategies for an industrial column", O. Agamennoni, J.

Figueroa, G. Barton, J.A. Romagnoli, International Journal of Control, Vol. 59,

No. 3, pp. 817-839 (1994)

93 "An algorithm for robust pole assignment via polynomial approach", J. Figueroa,

J.A. Romagnoli, IEEE Transactions on Automatic Control, (1994).

94 "Economic impact of disturbances in chemical processes-a dynamic analysis", J.

Figueroa, P. Barhi, J.A. Romagnoli, IFAC Workshop on "Integration of Process

Design and Control" (IPDC '94), pp. 141-147, Also in Computers and Chemical

Engineering, Vol. 20, No. 4, pp. 453-461(1996)

95 "Variable structure control with a second-order sliding condition: application to a

steam generator", H. Chiachiarini, A. Desages, A. Palazoglu, J.A. Romagnoli,

Automatica, Vol. 31, No. 8, pp. 1157-1168 (1995)

96 "Nonlinear control of a CSTR: disturbance rejection using sliding mode control",

C. Colantonio, A. Desages, J.A. Romagnoli, A. Palazoglu, Industry and

Engineering Chemistry Research, Vol. 34, No. 7,pp. 2383-2392 (1995)

97 "Wavelets: a brief introduction to concepts, implementations and applications",

A. Safavi, J.A. Romagnoli, The Journal of Computer Science and Engineering,

Vol. 1, No. 4, pp. 94-193 (1995)

98 "Back-off calculations in optimising control: a dynamic approach", P. Barhi, A.

Bandoni, J.A. Romagnoli, Computers and Chemical Engineering, Vol. 19, S pp.

699-708 (1995)

99 "An industrial implementation of advanced control strategies", J. Figueroa, O.

Agamennoni, G. Barton, J. Lear, J.A. Romagnoli, NATO-ASI Series, Methods of

Model Based Process Control, R. Berber Ed., pp. 683-800 (1995)

19

100 “ New results on robust controller design for chemical processes”, A. Palazoglu,

J.A. Romagnoli, NATO-ASI Series, Methods of Model Based Process Control, R.

Berber Ed., pp. 221-235 (1995)

101 “On the evaluation of a certain kind of approximation structure”, G. Sentoni, O.

Agamennoni, J.A. Romagnoli, Latin American Applied Research, Vol. 25S,pp

35-40 (1995)

102 "Optimising control of a pilot scale distillation column”, A. Nooraii, J.A.

Romagnoli, Acta Chimica Slovenica, Vol. 12,No. 1, pp. 93-100 (1995)

103 "A loop Shaping technique for feedback controller design", O. Agamennoni, J.

Figueroa, A. Palazoglu, J.A. Romagnoli, Computers and Chemical Engineering,

Vol. 20, No. 1, pp. 27-37 (1996)

104 "Disturbance rejection with bounded control action: loop shaping methodology",

J. Figueroa, O. Agamennoni, J.A. Romagnoli, AIChE Journal, Vol. 42, No. 2, pp.

466-476 (1996)

105 "Use of orthogonal transformations in data reconciliation", M. Sanchez, J.A.

Romagnoli, Computers and Chemical Engineering, Vol.20, No.5, pp. 483-493

(1996)

106 "Effect of disturbances in optimising control: the steady-state open-loop back-off

problem", P. Barhi, A. Bandoni, J.A. Romagnoli, AIChE Journal, Vol. 42, No. 4,

pp. 983-994(1996)

107 “Operability assessment in chemical plants”, P Barhi, A. Bandoni, J.A.

Romagnoli, Computers and Chemical Engineering, Vol. 20, pp. S787-

S792(1996)

108 “Gross measurements error detection/identification for an industrial ethylene

reactor”, M. Sanchez, G. Sentoni, S. Schbib, S. Tonelli, J.A. Romagnoli,

Computers and Chemical Engineering, Vol. 20., pp S1559-S1564 (1996)

109 “Steady-state back-off calculation: use of piecewise linear approximation”, J.

Figueroa, A. Desages, J.A. Romagnoli, Computers and Chemical Engineering,

Vol.20., pp. S527-S532(1996)

110 “Robust statistical process monitoring”, J. Chen, A. Bandoni, J.A. Romagnoli,

Computers and Chemical Engineering, Vol.20., pp. S497-S502(1996)

111 “Robust PCA and normal region in multivariable statistical process monitoring”,

J. Chen, A. Bandoni, J.A. Romagnoli, AIChE Journal, Vol. 42, No. 12, pp. 3563-

3566 (1996)

20

112 “Data reconciliation: an industrial case study”, J.A. Romagnoli, K. Islam, G.

Weiss, Computers and Chemical Engineering, Vol. 20, No. 12, pp. 1441-1449

(1996)

113 "Approximate models for nonlinear process control", G. Sentoni, O.

Agamennoni, A. Desages, Romagnoli J. A., AIChE Journal, Vol. 42, No. 8, pp.

2240-2251 (1996)

114 “ Application of artificial neural networks to the real-time operation of

conducting polymer sensors: a pattern recognition approach”, A. Talaie, J.A.

Romagnoli, Synthetic Metals, Vol. 82, pp. 27-33 (1996)

115 “An integrated artificial neural network/polymer based pH sensor: a new

engineering perspective to conducting polymer technology ”, A. Talaie, J.A.

Romagnoli, Synthetic Metals, Vol. 82, pp. 231-235 (1996)

116 “Robust estimation of measurement error variance/covariance from process

sampling data”, J. Chen, A. Bandoni, J.A. Romagnoli, Computers and Chemical

Engineering, Vol. 21, No. 6, pp.593-600 (1997)

117 "Integrated flexibility and controllability analysis in the design of chemical

processes", P. Barhi, A. Bandoni, J.A. Romagnoli, AIChE Journal, Vol. 43, No.

4, pp.997-1015 (1997)

118 “Wavelets-based density estimation and application to process monitoring”, A.

Safavi, J. Chen, J.A. Romagnoli, AIChE Journal, Vol.43, No. 5, pp. 1227-1241

(1997)

119 “Operability considerations in chemical processes: a switchability analysis”, L.

Vu, P. Barhi, J.A. Romagnoli, Computers and Chemical Engineering, Vol. 21,

pp. S143-S149 (1997)

120 “Robustness analysis of a pilot-scale distillation column", A. Nooraii, J.A.

Romagnoli, Computers and Chem. Eng., Vol. 21, No. 7, pp. 703-717 (1997)

121 “Towards an on-line conducting polymer composite based chemical sensor using

behavioural fuzzy clustering modelling technique”, A. Talaie, T. Taguchi , A.

.Mirhosseini, J.A. Romagnoli, Smart Material Structures, No. 6, pp. 601-606

(1997)

122 “Application of artificial intelligence methods in conducting polymer based

sensors”, A. Talaie, J.A. Romagnoli, Iranian Polymer Journal, Vol. 6, No. 1, pp.

53-61 (1997)

21

123 “Comments on nonlinear black box modelling in system identification: A unified

overview”, A.A. Safavi, J.A. Romagnoli, Automatica, Vol. 33, No. 6 pp. 1197-

1198 (1997)

124 “Application of wavelet-based neural networks to the modelling and optimisation

of an experimental distillation column”, A.A. Safavi, J.A. Romagnoli,

Engineering Applications of Artificial. Intelligence, Vol. 10, No. 3 pp. 301-313

(1997)

125 “Towards real time ion classification using a machine learning algorithm (C4.5):

a case study of a conducting polymer ion detector”, A. Talaie, J.A. Romagnoli,

N. Esmaili, T. Taguchi, Iranian Polymer Journal, Vol. 6, No. 3, pp. 185-194

(1997)

126 “Dynamic simulation and control of an industrial surfactant reactor”, S. Khuu,

J.A. Romagnoli, P. Barhi, G. Weiss, Computers and Chemical Engineering, Vol.

22, pp. S715-S718 (1998)

127 “Model predictive control based on Wiener models”, S. Norquay, A. Palazoglu,

J.A. Romagnoli, Chemical Engineering. Science, Vol. 53, No. 1, pp. 75-84

(1998)

128 “A new application of soft-computing theory to conducting polymer sensors: a

pH estimation study, A. Talaie, A.R. Mirhosseini, J.A. Romagnoli, T. Taguchi,

Computational and theoretical Polymer Science, Vol. 8, No. ¾, pp. 291-295

(1998)

129 “Introduction to a novel polymeric composite-based interface: fabrication,

characterization and application”, A. Talaie, K. Adachi, T. Taguchi, J.A.

Romagnoli, Composite Interfaces, Vol. 5, No. 5, pp. 461-468 (1998)

130 “Implementation of advanced operational and control techniques for a pilot

distillation column within a DCS environment”, A. Nooraii, J.A. Romagnoli,

Computers and Chemical Engineering, Vol. 4-5, pp. 695-708 (1998)

131 “Outlier detection in process plant data”, J. Chen, A. Bandoni, J.A. Romagnoli,

Computers and Chemical Engineering, Vol. 22, No. 3-4, pp. (1998)

132 “Polymer surfaces, Interfaces and computer modelling: an investigation of new

intelligent materials for sensing application”, A. Talaie, T. Taguchi, K. Adachi,

M. Zivdar, J.A. Romagnoli, Journal of Intelligent Material Systems and

Structures, Vol. 9, pp. 74-78 (1998)

133 “Effect of a chaotropic nature of supporting electrolytes on the electrochemical

properties of conducting polymers: a study using an in-situ/real time technique”,

22

A. Talaie, T. Taguchi, K. Adachi, J.A. Romagnoli, International Journal of

Polymer Analysis and. Characterization., Vol. 4, pp.267-281 (1998)

134 “Process data de-noising using wavelet transform”, A. Bakhtazad, A. Palazoglu,

J.A. Romagnoli, Intelligent Data Analysis, Vol. 3, pp. 267-285 (1999)

135 “Application of an engineering algorithm with software code (C4.5) for specific

ion detection in the chemical industries”, A. Talaie, N. Esmaili, T. Taguchi, , J.A.

Romagnoli, F. Talaie, Advances in Engineering Software, Vol. 30, pp. 13-19

(1999)

136 “Process identification, uncertainty characterization and robustness analysis of a

pilot-scale distillation column”, A. Nooraii, J.A. Romagnoli, J. Figueroa, Journal

of Process Control, Vol. 9, pp. 247-264 (1999)

137 “A hybrid model formulation for a distillation column and the on-line

optimisation study”, A. Safavi, A. Nooraii, J.A. Romagnoli, Journal of Process

Control, Vol. 9, pp. 125-134 (1999)

138 “On-line optimization control for a time-varying process using multiple models: a

laboratory scale fermenter application”, F. Azimzadeh, O. Galan, J. Bardford,

J.A. Romagnoli, Computers and Chemical Engineering, Vol. 23, pp. S235-S239

(1999)

139 “Dynamic polymeric electrodes, dynamic computer modelling and dynamic

electrochemical sensing”, ”, A. Talaie, J.Y. Lee, K. Adachi, T. Taguchi, , J.A.

Romagnoli, Journal of Electro-analytical Chemistry, 468, pp. 19-25 (1999)

140 “Application of Wiener model predictive control (WMPC) to a pH neutralization

experiment”, S. Norquay, A. Palazoglu, J.A. Romagnoli, IEEE Transactions on

Control Systems Technology, Vol. 7, No. 4, pp. 1-9 (1999)

141 “A kinetic model for methanol synthesis on a commercial deactivating catalyst”,

M. Rahimpour, J. Fathikalajahi, A. Jahnmiri, J.A. Romagnoli, Iranian Journal of

Science & Technology, Vol. 23, No. 3 Transaction B, pp. 1-7 (1999)

142 “Application of Wiener model predictive control (WMPC) to an industrial C2-

splitter”, S. Norquay, A. Palazoglu, J.A. Romagnoli, Journal of Process Control,

Vol. 9, pp. 461-473 (1999)

143 “Intelligent alarm filtering- a dynamic approach”, D. Leung, J.A. Romagnoli,

Computers and Chemical Engineering, Vol. 23, pp. S605-609 (1999)

144 “Detection and classification of abnormal process situations using

multidimensional wavelet domain hidden Markov tree”, A. Bakhtazad, A.

23

Palazoglu, J.A. Romagnoli, Computers and Chemical Engineering, Vol. 24, N0.

2-7, pp. 769-777 (2000)

145 “Real-time MPC supervisory system”, D. Leung, J.A. Romagnoli, Computers and

Chemical Engineering, Vol. 24, N0. 2-7, pp. 285-291 (2000)

146 “Optimisation and control of an industrial surfactant reactor”, S. Khuu, J.

Rodriguez, K.F. Ngian, J.A. Romagnoli, Computers and Chemical Engineering,

Vol. 24, N0. 2-7, pp. 863-871 (2000)

147 “Process synthesis and optimization tools for environmental design: methodology

and structure”, B. Alexander, G. Barton, J. Petrie, J.A. Romagnoli, Computers

and Chemical Engineering, Vol. 24, N0. 2-7, pp. 1195-1201 (2000)

148 "Web-Based Courseware in Teaching Laboratory-Based Courses", V.G. Gomes, B.

Choy, G.W. Barton and J.A. Romagnoli, Global Journal of Engineering Education,

Vol. 4, No. 1, pp. 65-71, (2000)

149 “Process Trend Analysis Using Wavelet-Based De-noising", A. Bakhtazad, A.

Palazoglu, J.A. Romagnoli, Control Engineering Practice, Vol. 8, pp. 657-663

(2000)

150 “Robust H Control for Nonlinear Plants Based on Multi-Linear Models – An

Application to a Bench Scale Neutralization Reactor”, O. Galán, J.A. Romagnoli,

A. Palazoglu, Chemical Engineering Science, Vol. 55, pp. 4435-4450 (2000)

151 "Dynamic probabilistic model-based expert system for fault diagnosis", D.

Leung, J.A. Romagnoli, Computers and Chemical Engineering, Vol. 24, pp.

2473-2492 (2000)

152 "Dynamics of a stirred-tank heater: Intuition and Analysis", J.A. Romagnoli, A.

Palazoglu, S Whitaker, Chemical Engineering Education, Vol. 35, No.1, pp.46-

49 (2001)

153 "A strategy for detection ad isolation of sensor failures and process upsets", F.

Doymaz, J.A. Romagnoli, A. Palazoglu, Chemometrics and Intelligent

Laboratory Systems, Vol. 55, pp. 109-123 (2001)

154 "On-line optimal trajectory control for a fermentation process using multi-linear

models", F. Azimzadeh, O. Galan, J.A. Romagnoli, Computers and Chemical

Engineering, Vol. 5, pp. 15-26 (2001)

155 "A robust strategy for real-time process monitoring", F. Doymaz, J. Chen, J.A.

Romagnoli, A. Palazoglu, Journal of Process Control, Vol. 11, pp. 343-359

(2001)

24

156 “Wavelet-based robust filtering of process data”, F. Doymaz, A. Bakhtazad, J.A.

Romagnoli, A. Palazoglu, Computers and Chemical Engineering, Vol. 25, pp.

1549-1559 (2001)

157 “An integration mechanism for multivariable knowledge-based fault diagnosis”,

D. Leung, J.A. Romagnoli, Journal of Process Control, Vol. 12, pp. 15-26 (2002)

158 “The Role of Wave-net models in Emulsion Polymerization", Zeaiter, J.,

Bakhtazad, A., Romagnoli, J.A., Barton G.W, Gomes, V.G., Powder Technology,

Vol. 124, pp 212-218 (2002)

159 “Robust control of a SAG mill”, O. Galan, G.W. Barton, J.A. Romagnoli,

Powder Technology, Vol. 124, pp 264-271 (2002)

160 "Operation of Semi-Batch Emulsion Polymerization Reactors: Modeling,

Validation and Effect of Operating Conditions", Zeaiter, J., Romagnoli, J.A.,

Barton G.W., Gomes, V.G. and Gilbert, R.G., Chemical Engineering Science,

Vol.57, pp. 2955-2969 (2002)

161 “Investigation of on-line optical particle characterization in reaction and cooling

crystallization systems: current state of the art”, A. Abbas, D. Nobbs, J.A.

Romagnoli, Measurement. Science Technology, Vol. 13, pp. 349-356 (2002)

162 "Facilitating process control teaching and learning in a virtual laboratory

environment", Murphy T., Gomes V.G., Romagnoli, J.A., Computer.

Applications in Engineering Education, Wiley Periodical Inc., Vol. 10, pp. 79-87

(2002)

163 "Inferential conversion monitoring and control in emulsion polymerization

through calorimetric measurements", Zeaiter, J., Gomes, V.G., Romagnoli, J.A.,

Barton G.W, Chemical Engineering Journal., Vol. 89, pp. 37-45 (2002)

164 “Hybrid modelling architecture for the solution of complex process systems”, A.

Abbas, V. Guevara, J.A. Romagnoli, Computer Aided Chemical Engineering,

Vol. 10, pp. 409-415 (2002)

165 “An integrated framework for multi-objective optimisation in process synthesis

and design”, H. Alhammadi, G. Barton, J.A. Romagnoli, B. Alexander, Computer

Aided Chemical Engineering, Vol. 10, pp. 817-823 (2002)

166 “On-line optimal control of particle size distribution in emulsion

polymerization”, J. Zeaiter, J.A. Romagnoli, G. Barton, V. Gomes, Computer

Aided Chemical Engineering, Vol. 10, pp. 607-613 (2002)

25

167 “Smart enterprise for pulp and paper mills: data processing and reconciliation”,

M. Sanchez, D. Leung, H. Konecsny, C. Bigaran, J.A. Romagnoli, Computer

Aided Chemical Engineering, Vol. 10, pp. 763-769 (2002)

168 “Supervisory regime control of non-linear processes: an application to a pilot

distillation column”, Rodriguez J., Goodwin G.C., Romagnoli J.A., Journal of

Process Control, Vol. 13, pp. 177-191 (2003)

169 “Framework for robust data reconciliation based on a generalized objective

function” D Wang, J.A. Romagnoli, Industry and Engineering Chemistry

Research, (2003)

170 “Gap metric concept and implications for multi-linear model-based controller

design”, O. Galan, J.A. Romagnoli, A. Palazoglu, Y. Arkun, Industry and

Engineering Chemistry Research, Vol. 42, pp. 2189-2197 (2003)

171 “Robust model predictive control design using a generalized objective function”,

D. Wang, J.A. Romagnoli, Computers and Chemical Engineering, Vol. 27, pp.

965-982 (2003)

172 “Detecting Abnormal Process Trends by Wavelet-Domain Hidden Markov”, W.

Sun, A. Palazoglu and Jose A. Romagnoli, AIChE Journal, Vol.49, No. 1, pp.

140-150 (2003)

173 “Reactor operating strategy and secondary nucleation in emulsion

polymerization”, J. Zeaiter, J.A. Romagnoli, V. Gomes, International Journal of

Chemical Reactor Engineering, Vol. 2, A2 (2004)

174 “Real-time implementation of multi-linear model-based control strategies––an

application to a bench-scale pH neutralization reactor”, O. Galán, J. A.

Romagnoli, A. Palazoglu, Journal of Process Control, Vol. 14, Issue 5, 571-579

(2004)

175 “Analysis of shear-induced coagulation in an emulsion polymerization reactor

using computational fluid dynamics”, R. C. Elgebrandt, J. A. Romagnoli, D. F.

Fletcher, V. G. Gomes and R.G. Gilbert, Chemical Engineering Science, Vol. 60,

Issue 7, Pages 2005-2015 (2005)

176 “Robust multi-scale principal components analysis with applications to process

monitoring”, D. Wang and J.A. Romagnoli, Journal Of Process Control, Vol.

15,No. 8, pp 869-882 (2005)

177 “Advanced modeling and optimal operating strategy in emulsion

copolymerization: Application styrene/MMA”, Alhamad B., Romagnoli J.A.,

Gomes V.G., Chemical Engineering Science, Vol. 60, 2795-2813 (2005

26

178 “Generalized T distribution and its applications to process data reconciliation and

process monitoring”, D. Wang and J.A. Romagnoli, Transactions of the Institute

of Measurement and Control,, Vol. 27, No. 5, pp 367-390 (2005)

179 “Experiential engineering e-learning: the concept of soft reaction”, A. Abbas, J.

Orellana, P. Rolandi, J.A. Romagnoli, World Transactions of Engineering

Education, Vol. 4, No. 2, pp. 171-176 (2005)

180 “Inferential conversion monitoring in emulsion co-polymerization through

calorimetric measurements”, Alhamad B., Romagnoli J.A., Gomes V.G.,

International Journal of Chemical Reactor Engineering, Vol. 4, A7 (2006)

181 “Simultaneous Dynamic Validation/Identification of Mechanistic Process Models

and Reconciliation of Industrial Process Data”, P. Rolandi, J.A. Romagnoli,

Computer-Aided Chemical Engineering, Vol. 21-A, pp. 267-272 (2006)

182 “Model-based optimization for operational policies in seeded cooling

crystallization”, A. Abbas, M. Nowee, J.A. Romagnoli, Computer-Aided

Chemical Engineering, Vol. 21-B, pp1347-1352 (2006)

183 “An integrated framework based on data driven techniques for process

supervision”, B. Bhushan, J.A. Romagnoli, Computer-Aided Chemical

Engineering, Vol. 21-B, pp. 1401-1407 (2006)

184 “A framework for modeling particle size effects in emulsion polymerization

systems using computational fluid dynamics linked to a detailed population

balance modeling”, R. Elgebrandt, D. Fletcher, V. Gomes, J.A. Romagnoli,

Computer-Aided Chemical Engineering, Vol. 21-A, pp. 551-557 (2006)

185 “Model-centric technologies for support of manufacturing operations”, J.A.

Romagnoli, P. Rolandi, Computer-Aided Chemical Engineering, Vol. 21-A, pp.

63-70 (2006)

186 “A multi-scale orthogonal nonlinear strategy for multivariate statistical process

monitoring”, A Maulud, D. Wang, J.A. Romagnoli, Journal of Process Control,

Vol. 16, No. 7, pp. 671-683 (2006)

187 “DCS implementation of optimal operational policies: a crystallisation case

study”, Abbas A., Romagnoli J.A, International Journal of Computer

Applications in Technology, Vol. 25, No. 4, pp. 198-208 (2006)

188 “Online control of molar mass and particle size distributions in emulsion

polymerization”, J. Zeaiter, J.A. Romagnoli, V. Gomes, AIChE Journal, Vol. 52,

No. 5, pp. 170-179 (2006)

27

189 “Chemical engineering curriculum renewal”, Gomes V.G., Barton G.W., Petrie

J.G., Romagnoli J.A., Holt P., Abbas A., Cohen B., Harris A.T., Haynes B.S.,

Langrish T.A.G., Orellana J., See H.T., Valix M., White D., Education for

Chemical Engineers, Volume 1, Issue 1, Pages 116-125 (2006)

190 “Multi-scale modelling, simulation and validation of batch cooling

crystallization”, A. Abbas, J.A. Romagnoli, Separation and Purification

Technology, 53 (2007) 153–163

191 “Sonocrystallization of sodium chloride particles for inhalation”, A. Abbas, M.

Srour, P. Tang, H. Chiou, H.K. Chan, J. A. Romagnoli, Chemical Engineering

Science, Vol. 62, No. 9, pp. 2445– 2453 (2007)

192 “Cluster Analysis for Auto-correlated and Cyclic Chemical Process Data”, S.

Beaver, A. Palazoglu, J. A. Romagnoli, Industry and Engineering Chemistry

Research, Vol. 46, No. 11, pp, 3610-3622 (2007)

193 “Strategy for Process Monitoring Based on Radial Basis Function Network and

Polygonal Line Algorithm”, B. Bhushan, J. A. Romagnoli, Industry and

Engineering Chemistry Research, Vol. 46, No. 15, pp. 5131-5140 (2007)

194 “Computer-aided knowledge-based monitoring and diagnostic system for

emulsion copolymerization”, R. Chew, V. G. Gomes_ and J. A. Romagnoli,

IChem E, Vol. 85 (A10) 1–11 (2007)

195 “Online inferential product attribute estimation for optimal operation of emulsion

Terpolymerization: Application to styrene/MMA/MA”, M.H. Srour, V.G.

Gomes, J.A. Romagnoli, Chemical Engineering Science, Volume 62, Issue 16,

pp. 4420-4438 (2007)

196 “Optimization in seeded cooling crystallization: A parameter estimation and

dynamic optimization study”, M. Nowee, A. Abbas, J. A. Romagnoli, Chemical

Engineering and Processing, Vol. 46, No. 11, pp. 1096–1106 (2007)

197 “Curriculum Intensification though integration of units of study in the Chemical

Engineering degree program”, A. Abbas, J. A. Romagnoli, Trans IChemE, Part

D, Education for Chemical Engineers, Vol. 2: pp.46–55 (2007)

198 “Separating touching and overlapping objects in particle images–a combined

approach”, Korath J.M., Abbas A., Romagnoli, J.A., Chemical Engineering

Transactions, 11, 167-172 (2007),

199 “Self-Organizing Self-Clustering Network: A Strategy for Unsupervised Pattern

Classification with Its Application to Fault Diagnosis”, Bharat Bhushan, Jose A.

Romagnoli, Industry and Engineering Chemistry Research, No. 47, pp. 4209 –

4219 (2008)

28

200 “Inferential Conversion and Composition Monitoring via Micro Calorimetric

Measurements in Emulsion Terpolymerization”, M. H. Srour, V. G. Gomes, I. S.

Altarawneh, J. A. Romagnoli, Polymer-Plastics Technology and Engineering, 47:

13–22 (2008)

201 “A clustering approach for the separation of touching edges in particle images”,

Korath J.M., Abbas A. and Romagnoli J.A., Particle & Particle Systems

Characterization, Vol. 25, Issue 2, pp. 143-152 (2008)

202 “An intelligent /smart framework for real-time process monitoring and

supervision”, B. Bhushan, J. A. Romagnoli , Modeling, Control, Simulation, and

Diagnosis of Complex Industrial and Energy Systems, ISA/O3neida series, Eds.

L. Ferrarini, C. Veber, Chapter 10, pp. 245, (2008) ISBN/ID: 978-1-934394-90-8

203 “Model-based optimal strategies for controlling particle size in antisolvent

crystallization operations.”, Nowee, S.M., Abbas A. and Romagnoli J.A., Crystal

Growth & Design, Vol. 8, Issue 8 pp. 2698-2806 (2008)

204 “Direct control of particle size in antisolvent crystallization Part I: Model

identification, experimental validation and dynamic simulation”, S. M. Nowee,

A. Abbas, J. A. Romagnoli, Chemical Engineering Science, Vol. 63, Issue 22

pp.5457- 5467 (2008)

205 “Line Edge Detection and Characterization in SEM Images using Wavelets”, W.

Sun, J. A. Romagnoli, J. W. Tringe, S. E. Létant, P. Stroeve, A. Palazoglu, IEEE

Transactions on Semiconductor Manufacturing, IEEE Trans. on Semiconductor

Manufacturing, 22(1), pp. 180-187(2009)

206 “A Multi-Resolution Approach for Line Edge Roughness Detection”, R.

Mukherjee, W. Sun, P. Stroeve, A. Palazoglu, J. A. Romagnoli, Microelectronic

Engineering, 86(3), pp.340-351 (2009)

207 “Process Systems Engineering Education: Learning by Research”, A. Abbas,

H.Y. Alhammadi, J.A. Romagnoli, Chemical Engineering Education, Vol. 43,

No. 1 (2009)

208 “Semiconductor LER, surface roughness and shape automatic monitoring through

multi-resolution multivariate image analysis”, P. Facco, R. Mukherjee, F. Bezzo,

M. Barolo, J. A. Romagnoli, AIChE Journal, Vol. 55, No. 5, pp. 1147-1160

(2009)

209 “Sequencing diurnal air flow patterns for ozone exceedance days around

Houston, Texas, S. Pakalapati, S. Beaver, J. A. Romagnoli, A. Palazoglu,

Atmospheric Environment, Vol.43, Issue 3, pp. 715-723 (2009)

29

210 “Modelling and Optimisation of an Industrial Ethylene Oxide Reactor”, S.

Aryana, M. Ahmadi, V. Gomes, J.A. Romagnoli, K. Ngian, Chemical Product

and ProcessModelling,Vol.4, Issue 1, Article 14 (2009)

211 “Selective Oxidation of Ethylene in an Industrial Packed-Bed Reactor: Modeling,

Analysis and Optimization”, O. Galan, V. G. Gomes, J.A. Romagnoli, K. F.

Ngian, International Journal of Chemical Reactor Engineering, Vol. 7, Article

A32 (2009)

212 “A Multiresolution Spatial Correlation Approach for Line-Edge Roughness

Characterization”, R. Mukherjee, J.C. Flake, A. Palazoglu, J.A. Romagnoli,

Journal of Wavelet Theory and Applications, Volume 3, Number 1, pp. 103-122 (2009)

213 “Integrated model-centric framework for support of manufacturing operations.

Part I: The framework”, Rolandi P.A., Romagnoli J.A., Computers and Chemical

Engineering, Vol. 34, pp. 17–35 (2010)

214 “Stochastic Approach for the Calculation of Anti-Solvent Addition Policies in

Crystallization Operations: An Application to a Bench-Scale Semi-Batch

Crystallizer”, O. Galan, M. Grosso, R. Baratti, J.A. Romagnoli, Chemical

Engineering Science, Vol. 65, 1797–1810 (2010)

215 “A Fault Detection and Diagnosis Strategy for Batch/Semi Batch Processes”, H.

Maulud, J.A. Romagnoli, Chemical Product and Process Modelling, Vol. 5, Iss.

1, Article 14 (2010)

216 “Effects of operating conditions on particle size in sonocrystallization”, H.

Oubani, A. Abbas, M. Srour, J. A. Romagnoli, Asia-Pac. Journal of Chem. Eng.,

DOI: 10.1002/apj.437 (2010)

217 “A Stochastic Formulation for the Description of the Crystal Size Distribution in

Anti-solvent Crystallization Processes”, M. Grosso, O. Galan, R. Baratti, J. A.

Romagnoli, AIChE Journal, Vol. 56, No. 8, pp 20077-2087 2010)

218 “Modelling and Multi-resolution Characterization for Microfabrication

Applications”, R. Mukherjee, F. R. Hung, A. Palazoglu, J. A. Romagnoli,

Industrial & Engineering Chemistry Research, Vol. 49 (2), pp 548–558 (2010)

219 “Refinery Scheduling of Crude Oil Unloading, Storage and Processing using a

Model Predictive Control Strategy”, U. Yüzgeç, A. Palazoglu, J. A. Romagnoli,

Computers and Chemical Engineering, Volume 34, Issue 10, pp. 1671-1686

(2010)

220 “Comparison of different solubility equations for modeling in cooling

Crystallization”, D.J. Widenski, A. Abbas, J.A. Romagnoli, Chemical

30

Engineering and Processing: Process Intensification, Vol. 49, pp. 1284–1297

(2010)

221 “Dynamic Simulation and Optimization of a Urea Granulation Circuit”, I. M.

Cotabarren, D. Bertín, J. A. Romagnoli, V. Bucalá, J. Piña, Industrial and

Engineering Chemistry Research, ISSN 0888-5885, Vol. 49 (14), 6630-6640

(2010)

222 “A Novel Approach for the Prediction of PSD in Antisolvent Mediated

Crystallization Processes”, M. Grosso, O. Galan, R. Baratti, J. A. Romagnoli,

Brazilian Journal of Chemical Engineering, Vol. 27, No. 03, pp. 391 - 399 (2010)

223 “On the topological modelling and analysis of industrial process data using the

SOM”, F. Corona, M. Mulas, R. Baratti, J.A. Romagnoli, Computers &

Chemical Engineering, Vol. 34, Issue 1, pp. 2022 – 2032 (2010)

224 “Characterization of Surface Coats of Bacterial Spores with Atomic Force

Microscopy and Wavelets”, W. Sun, A. Palazoglu, J.A. Romagnoli, P. Stroeve,

Industrial & Engineering Chemistry Research, Vol. 50, pp. 2876–2882 (2011)

225 “Stochastic Approach for the Prediction of PSD in Crystallization Processes:

Formulation and Comparative Assessment of Different Stochastic Models”, M.

Grosso, G. Cogoni, R. Baratti, J. A. Romagnoli, Industrial & Engineering

Chemistry Research, Vol. 50, pp. 2133–2143 (2011)

226 “A Multi-Level Simulation Approach for the Crude Oil Loading/Unloading

Scheduling Problem”, G. Robertson, A. Palazoglu, J.A. Romagnoli, Computers &

Chemical Engineering, 35, 817–827 (2011)

227 “Multi-Resolution Fuzzy Clustering Approach for Image-Based

Particle Characterization for Particle Systems”, B. Zhang, A. Abbas, J.A.

Romagnoli, Chemometrics and Intelligent Laboratory Systems, 107, 155–164

(2011)

228 “A Decision Support Tool for Strategic Analysis of Sustainable Biorefineries”, P

Sharma, B. Sarker, J.A. Romagnoli, Computers and Chemical Engineering, 35,

1767– 1781 (2011)

229 "Use of Predictive solubility models for isothermal antisolvent crystallization

modelling and optimization”, D. Widenski, A. Abbas, J.A. Romagnoli, Industrial

& Engineering Chemistry Research, 50 (13), 8304–8313 (2011)

230 “Framework for Integrated Model-Centric Process Support”, D. Aragon, P. A.

Rolandi, J. A. Romagnoli, Industrial & Engineering Chemistry Research, 50

(18), pp 10533–10548 (2011)

31

231 “A Model-Based Nucleation Study of the Combined Effect of Seed Properties and

Cooling Rate in Cooling Crystallization”, Widenski D., Abbas A., Romagnoli,

Computers and Chemical Engineering, 35:12, 2696-2705 (2011)

232 “A stochastic approach for the prediction of PSD in crystallization processes:

analytical solution for the asymptotic behaviour and parameter estimation”, S.

Tronci, M. Grosso, R. Baratti, J. A. Romagnoli, Computers and Chemical

Engineering, 35, pp. 2318– 2325 (2011)

233 “Time Evolution of the PSD in Crystallization Operations: An Analytical Solution

based on Ornstein-Uhlenbeck Process”, Cogoni G., Grosso M., Baratti R.,

Romagnoli J.A., AIChE Journal, Vol. 58 (12), pp. 3731–3739 (2012)

234 “A modelling approach for the non-isothermal antisolvent crystallization of a

solute with weak temperature dependent solubility”, Widenski D.J., Abbas A.,

Romagnoli J.A., Crystal Research and Technology, Vol. 47, No. 5, pp. 491-504

(2012)

235 "Data-derived analysis and inference for an industrial deethanizer", Corona, F.;

Mulas M.; Baratti R.; Romagnoli J.A., Industrial & Engineering Chemistry

Research, 51 (42), pp. 13732–13742 (2012)

236 “Strategic Value Optimization and Analysis of Multi-product Biomass Refineries

with Multiple Stakeholder Considerations”, Sharma P., Romagnoli J.A.,

Computers and Chemical Engineering, Vol. 50, 5, pp. 105–129 (2013)

237 “Image-based multiresolution ANN sensor for PSD in crystallization operations”,

B. Zhang, R. Willis, C. Fois, S. Tronci, R. Baratti, J.A. Romagnoli, Chemical

Engineering Transactions, Volume 32 (2013)

238 “Automatic image-based estimation of texture analysis as a monitoring tool for

crystal growth”, Zhang B., Abbas A., Romagnoli J.A., Chemometrics and

Intelligent Laboratory Systems, 121, 42–51 (2013)

239 “Options analysis for long-term capacity design and operation of a lignocellulosic

biomass refinery”, P. Sharma, J.A. Romagnoli, Computers and Chemical

Engineering, Vol. 58, pp. 178–202 (2013)

240 “A Simulation and Techno-economic Optimization-based Methodology to Design

Multi-product Lignocellulosic Biorefineries”, A. Geraili, P. Sharma, J.A.

Romagnoli, Chemical Engineering Transactions, Volume 32, pp.1183-188 (2013)

241 “Stochastic Approach for the Prediction of PSD in Nonisothermal Antisolvent

Crystallization Processes’, G. Cogoni, S. Tronci, R. Baratti, J. A. Romagnoli,

AIChE Journal, Vol.59, No. 8,pp. 2843-2851 (2013)

32

242 “Stochastic Global Model for the Prediction of the Asymptotic CSDs Using

Antisolvent Crystallization Processes”, G. Cogoni, S. Tronci, G. Mistretta, R.

Baratti, J.A. Romagnoli, Chemical Engineering Transactions, Volume 32, pp.

2107-2112 (2013)

243 “Image-based Multi-resolution-ann Approach for On-line Particle Size

Characterization”, Zhang B., Willis R., Romagnoli J., Fois C.A.M., Tronci S.,

Baratti R., Chemical Engineering Transactions, Volume 32, pp 2203-2208

(2013)

244 “On the Influence of Hydrogen Bond Interactions in Isothermal and Non-

isothermal Antisolvent Crystallization Processes”, G. Cogoni, R. Baratti, J.A.

Romagnoli, Industrial & Engineering Chemistry Research, 52 (28), pp. 9612–

9619 (2013)

245 “An active specification switching strategy that aids in solving nonlinear sets and

improves a VNS/TA hybrid optimization methodology”. G. Robertson, A. Geraili,

M. Kelley, J.A. Romagnoli, Computers & Chemical Engineering, Vol. 60, pp.

364-375 (2014)

246 “A modelling framework for design of nonlinear renewable energy systems

through integrated simulation modelling and metaheuristic optimization:

Applications to biorefineries”, A. Geraili, P. Sharma, J.A. Romagnoli, Computers

& Chemical Engineering, Volume 61, pp. 102–117 (2014)

247 “A qualitative comparison between population balances and stochastic models for

non-isothermal antisolvent crystallization processes”, G. Cogoni, D. Widenski, M.

Grosso, R. Baratti, J.A. Romagnoli, Computers & Chemical Engineering, Vol. 63,

pp. 82–90 (2014)

248 “Image-based multiresolution-ANN approach for on-line particle size

characterization”, B. Zhang, R. Willis, J. A. Romagnoli, C. Fois, S. Tronci, R.

Baratti, Industrial & Engineering Chemistry Research, 53(17), pp. 7008-70018

(2014)

249 “Controllability of Semi-Batch Nonisothermal Antisolvent Crystallization

Processes”, G. Cogoni, S. Tronci, R. Baratti, J. A. Romagnoli, Industrial &

Engineering Chemistry Research, 53(17), pp. 7056–7065 (2014)

250 “Technology Analysis of Integrated Biorefineries through Process Simulation and

Hybrid Optimization”, A. Geraili, J. A. Romagnoli, Energy, Vol. 73, pp. 145–159

(2014)

251 “Topological Preservation Techniques For Nonlinear Process Monitoring”, G.

Robertson, M. Thomas, J.A. Romagnoli, Computers & Chemical Engineering,

Vol. 76 (2015)

33

252 “Design of Renewable Energy Processes Under Uncertainty: Application to

Biorefineries”, A. Geraili, J.A. Romagnoli, AIChE Journal, (2015)

253 “On-Line Optimal Control of Crystal Properties in Non-Isothermal Antisolvent

Crystallization”, N. Ghadipasha, J. A. Romagnoli, S. Tronci, R. Baratti. AIChE

Journal, (2015)

254 “A Stochastic Formulation and On-line Monitoring technique for the

Measurement of Salt Concentration in Non-Isothermal Antisolvent Crystallization

Processes”, N. Ghadipasha, R. Baratti, S. Tronci, J. A. Romagnoli, Chemical

Engineering Transactions, Vol.. 43 (2015)

255 “A Framework for Optimal Design of Integrated Biorefineries under Uncertainty”,

A. Geraili, J. A. Romagnoli, Chemical Engineering Transactions, Vol. 43 (2015)

B. CONFERENCE PROCEEDINGS

1 "Variable control structures", Romagnoli, J.A., Alvarez, J. and Stephanopoulos,

G., Joint Automatic Control Conference Vol. 11, TP-5 (1980)

2 "On experimental design in chemical kinetics: a global approach", Porras, J.,

Gatica, J., Errazu, A. and Romagnoli, J.A., Proceedings Canadian Chemical.

Engineering Conference, Sec. 18, Vol. III (1982)

3 "Design of multivariable controllers in frequency domain", Agamennoni, O.,

Desages, A. and Romagnoli, J.A., Proceedings American Control Conference,

June (1985)

4 "Analysis and control of distillation columns: a quasi classical approach",

Rotstein, H., Desages, A., Romagnoli, J.A., Karim, N., DYCORD Dynamic and

control of Chemical Reactors and Distillation Columns, Leads, England,

December (1986)

5 "Tailoring of thermodynamic models in process simulation", Mabe G., Brignole,

E. and Romagnoli, J.A., CEF:87 The use of computers in chemical engineering,

Italy (1987)

6 "Catastrophe and bifurcation theories in chemically reacting systems: frequency

domain analysis", Moiola, J., Desages, A. and Romagnoli, J.A., Proc. IFAC Conf.

on Automatic Control. Buenos Aires, Argentina (1990)

34

7 "A study of the controller tuning for stabilising nonlinear systems based on

generalised models", Khambanonda, T., Palazoglu, A. and Romagnoli, J.A.,

Proc. ACC, FP06 (1990)

8 "Robust characteristic polynomial assignment", Rotstein, H., Desages, A., Pena,

R.S. and Romagnoli, J.A., Proceedings Automatic Control Conference, WP13a

(1990)

9 "Robust controller design for a single link flexible manipulator", Widmann G.,

Nebot E., Desages, A. and Romagnoli, J.A., Proceedings Automatic Control

Conference, TPO7f (1990)

10 "A generalized loop shaping technique for design of multivariable feedback

control systems", O. Agamennoni, J. Figueroa, A. Desages, J.A. Romagnoli, A.

Palazoglu, Proceedings Automatic Control Conference. Vol. 1, pp.896 (1992)

11 "A hybrid nonlinear controller- case study of a CSTR", M. Colantonio, J.A.

Romagnoli, A. Desages, A. Palazoglu, Proceedings Automatic Control

Conference. Vol. 4, pp.2581 (1992)

12 "Trade-offs in robust controller design", J. Figueroa, A. Desages, A. Palazoglu,

J.A. Romagnoli, Proceedings Automatic Control Conference. Vol.4, pp.3016

(1992)

13 "Variable structure control strategies: application to MIMO nonlinear steam

generating unit", Proceedings Automatic Control Conference. Vol. 2, pp.1034

(1992)

14 "Robust control indicators in process design and control", J. Figueroa, G. Barton,

J.A. Romagnoli, IFAC Interaction Between Process Design and Process Control,

pp. 139-144, Ed. J.D. Perkins, Pergamon Press. (1992)

15 "Improved operation of an industrial distillation column through advanced

control", J. Lear, R. Dimacio, G.W. Barton, J.A. Romagnoli, IFAC World

Congress Sydney, Vol.1, pp. 59-62, (1993)

16 "A strategy for the non-linear control of affine systems using multiple neural

networks", C. Chessari, G.W. Barton, J.A. Romagnoli, Proceedings Automatic

Control Conference, Vol. 2, pp. 1470-1475 (1993)

17 "Design of controllers with disturbance rejection capabilities: a loop-shaping

Methodology", J.L. Figueroa, O. Agamennoni, J.A. Romagnoli, Proceedings

Automatic Control Conference , Vol. .3, pp. 2802-2807 (1993)

35

18 "Control and optimisation in the food industry: application to an apple juice

concentrate plant", Bandoni A., Romagnoli J.A., Proc. Japan-Australia In Food

Processing, Sydney (1993)

19 "The economic assessment of alternatives in optimising control", J. Figueroa, P.

Barhi, G. Barton, J.A. Romagnoli, ICHEME Symposium Series , No. 133, pp.

207-213 (1994)

20 "On optimising control and the effect of disturbances: application to a gas-tail

system", N. Sunarto, J. Bandoni, G. Barton, J.A. Romagnoli, ICHEME

Symposium Series, No. 133, pp. 159-167 (1994)

21 "On-line data reconciliation, simulation and optimising control of a pilot-scale

distillation column", A. Nooraii, G. Barton, J.A. Romagnoli, Process System

Engineering 94, Vol. 2, pp. 1265-1268 (1994)

22 "A neural network based inferential measurement on an industrial propathene

reactor", O. Agamennoni, J.A. Romagnoli, G. Barton, K. Bourke, Process System

Engineering 94, Vol. 2, pp. 1253-1258 (1994)

23 "Disturbance economics in optimising control: Back-off calculations for an

industrial distillation column", P. Barhi, A. Bandoni, G. Barton, J.A. Romagnoli,

Process System Engineering 94, Vol.2, pp. 983-988 (1994)

24 "Continuous and discrete design of second-order sliding-mode controllers", H.

Chiachiarini, A. Desages, J.A. Romagnoli, IFAC Symposium on Robust Control

Design, pp. 75-80 (1994)

25 "The application of neural networks in the development of an on-line model for a

semi-regenerative catalytic reformer" C. Chessari, B. McKay, O. Agamennoni, G.

Barton, J.A. Romagnoli, World Congress on Neural Networks, Vol. I, pp. 173-

178 (1994)

26 "A neural network based prediction scheme for an industrial propathene reactor,

O. Agamennoni, C. Chessari, J.A. Romagnoli, G. Barton, K. Bourke, World

Congress on Neural Networks, Vol. I, pp. 195-200 (1994)

27 “Application of Wave-nets to modelling and optimisation of a multidimensional

chemical \process”, A. Safavi, J.A. Romagnoli, Proc. IEEE Conference on

Neural Networks, Vol. 4, pp.1724-1728 (1995)

28 “Pattern recognition in conducting polymers using artificial intelligence”, A.

Talaie, M. Esmaili, F. Talaie, J.A. Romagnoli, Proceedings International

Symposium on Microsystems, Intelligent Material and Robots, Sandai, Japan,

September, pp 289-292 (1995)

36

29 “Robustness analysis of a pilot scale distillation column within a DCS

environment”, A. Nooraii, J.A. Romagnoli, Dycord’95 IFAC Symposium on

Dynamic and Control of Chemical Reactors and Distillation Columns and Batch

Processes”, pp. 477-483 (1995)

30 “Application of Wavelets to density estimation for process monitoring”, A.

Safavi, J.A. Romagnoli, IFAC World Conference, San Francisco, Vol. M, 7a-06

6, pp. 247-252 (1996)

31 “Nonlinear model predictive control of pH neutralisation using Wiener models”,

S. Norquay, A. Palazoglu, J.A. Romagnoli, IFAC World Conference, San

Francisco, Vol. M, 7a-01 6, pp. 31-36 (1996)

32 “On the use of stability techniques to determine neural networks models suitable

for differential geometric based nonlinear controller design”, C. Chessari, G.W.

Barton, J.A. Romagnoli, IFAC World Conference, San Francisco, Vol. M, 7a-11

2, pp. 367-372 (1996)

33 “Unconstrained and constrained model predictive control using Wiener models:

an application to pH neutralization”, S. Norquay, A. Palazoglu, J.A.

Romagnoli, IFAC-ADCHEM, pp.541-547 (1997)

34 “Data reconciliation via temporal and spatial redundancies:”, J. Chen, J.A.

Romagnoli, IFAC-ADCHEM, pp 647-653 (1997)

35 “Pattern recognition applications in conducting polymer based sensors”, A.

Talaie, J.A. Romagnoli, IFAC-ADCHEM, pp.329-334 (1997)

36 “A practical method for controlling nonlinear processes using multi-models

techniques”, A. Palizban, A. Safavi, J.A. Romagnoli, CONTROL’97, Iasted Acta

Press, pp. 345-349 (1997)

37 “ On the two practical issues in system identification with wavelets”, A.A. Safavi,

J.A. Romagnoli, SYSID’97 IFAC Symposium on System Identification,, Vol. 1,

pp. 21-26 (1997)

38 “Intelligent monitoring for quality control in a biological nutrient removal

wastewater treatment pilot plant”, T. Robertson, J. Chen, J.A. Romagnoli, B.

Newell, DYCOPS-5, IFAC Symposium on Dynamics and Control of Process

Systems, pp. 590-596 (1998)

39 “Supervisory Multiple model control”, J. Rodriguez, J.A. Romagnoli, G.

Goodwin, DYCOPS-5, IFAC Symposium on Dynamics and Control of Process

Systems, pp. 590-596 (1998)

37

40 “Process trend analysis using wavelet based de-noising”, A. Bakhtazad, J.A.

Romagnoli, A. Palazoglu, IFAC On-line Fault Detection and Supervision in the

Chemical Industries, Vol. 1, pp. 1-7 (1998)

41 “Fault diagnosis expert system with probability calculations”, D. Leung, J.A.

Romagnoli, IFAC On-line Fault Detection and Supervision in the Chemical

Industries, Vol. 1, pp. (1998)

42 “Integrating on-line and off-line fault detection for process safety”, J. Cao, J.A.

Romagnoli, H.M. Tweeddale, P.K. Walsh, IFAC On-line Fault Detection and

Supervision in the Chemical Industries, Vol. 2, pp. 96-101 (1998)

43 “Advanced Operational Analysis of an Industrial Surfactant Reactor”, S. Khuu ,

J. A. Romagnoli, K. Ngian, APCChE Proceedings, Vol. 2, 16-19, pp. 363-366

(1999)

44 “Non-linear System Identification Using Wavelet Based Adaptive Robust M-

estimators”, A. Safavi, D. Wang, J. A. Romagnoli, Proceedings IFAC World

Congress, Vol. N, pp. 181-186, (1999)

45 “The Role of Hybrid Models in Emulsion Polymerization”, J. Zeaiter, A.

Bakhtazad, J.A. Romagnoli, G.W. Barton, V.G. Gomes, R. Gilbert, Control of

Particulate Processes VI, Frazer Island, Australia, 19-24 September (1999)

46 “Coefficient de-noising with wavelet transform”, A. Bakhtazad, J.A. Romagnoli,

SPIE Proc. Series, Vol. 3813, pp. 752-761 (1999)

47 "The Role of Virtual Plants in Engineering Education", G.W. Barton, B. Choy

and J.A. Romagnoli, Educause in Australasia '99, Sydney, Proceedings on CD-

ROM/Internet (http://www.usyd.edu.au/educause/, 5 pages), 18-21 April 1999

48 "Hypermedia Navigation of Pilot-Scale Process Plants as a Teaching Tool", V.G.

Gomes, B. Choy, G.W. Barton and J.A Romagnoli, 2nd

Asia-Pacific Forum on

Engineering &Technology Education, Sydney, pp. 53-56, 4-7 July 1999

49 "Modelling and Control of a Mineral Comminution Circuit", O. Galan, G.W.

Barton and J.A. Romagnoli, Control of Particulate Processes VI, Frazer Island,

Australia, 19-24 September 1999

50 "Robust On-line System Identification for Nonlinear Dynamic Systems Using

Wavelet-Based Density Estimation", D. Wang, G.W. Barton and J.A. Romagnoli,

Modelling, Identification and Control 2000, Innsbruck, Austria, 14-17 February

2000

38

51 "Robust Real-Time Identification Based on an Optimal Residuals Nonlinear

Transformation", D. Wang, G.W. Barton and J.A Romagnoli, System Identification

Symposium 2000, Santa Barbara, California, USA, 21-23 June 2000.

52 “Calorimetry for Emulsion Polymerisation: Model Validation and Control

Strategy Formulation”, J. Zeaiter, V.G. Gomes, G.W. Barton, R.G. Gilbert and

J.A. Romagnoli, Chemeca 2000 (28th

Australasian Chemical Engineering

Conference), Perth, Western Australia, Proceedings on CD-ROM, 9-12 July 2000

53 "Fault Detection, Isolation and Distinguishing Between Sensor Failures and

Disturbances", F. Doymaz, A. Palazoglu, J.A. Romagnoli, ADCHEM 2000 (IFAC

International Symposium on Advanced Control of Chemical Processes), Pisa,

Italy 14-16 June (2000)

54 "A Framework of Full Integration of Multivariate Statistical Information into

Knowledge-Based Fault Diagnosis", D. Leung, J.A. Romagnoli, ADCHEM 2000

(IFAC International Symposium on Advanced Control of Chemical Processes),

Pisa, Italy 14-16 June (2000)

55 "Expert System Technology for MPC Supervision and Adaptation", D. Leung,

J.A. Romagnoli, ADCHEM 2000 (IFAC International Symposium on Advanced

Control of Chemical Processes), Pisa, Italy 14-16 June (2000)

56 ”On the Use of Gap Metric for Model Selection in Multi-Linear Model-Based

Control”, O. Galán, J.A. Romagnoli, Y. Arkun, A. Palazoglu, Proceedings

American Control Conference, Chicago, Illinois, USA, pp. 3742-3746, June 28-

30 (2000)

57 “Use of Gap Metric for Model Selection in Multi-Model Based Control Design”,

O. Galán, J.A. Romagnoli, Y. Arkun, and A. Palazoglu, S. Pierucci (Editor),

ESCAPE-10: European Symposium on Computer Aided Process Engineering,

Florence, Italy, pp. 211-216, 7-10 May (2000)

58 "Knowledge-based fault diagnosis with adaptive probability update on

recausticizing plant", Leung D., Romagnoli J.A., Proceedings of 4rd

IFAC

Workshop on On-line Fault Detection and Supervision in the Chemical Process

Industries, pp. 101-105, Jejudo Island, Korea, June (2001)

59 “Modelling and optimization of a high density Fermentation Process using multi-

linear models: an application to a bench scale bioreactor, O. Galan, J.A.

Romagnoli, A. Palazoglu, Proceedings European Symposium on Computer Aided

Process Engineering-11, R. Gani, SB Jorgensen Ed, pp 141-146 (2001)

60 "Strategies for Optimization and Control of Molecular Weight and Particle Size

Distributions in Emulsion Polymerization", Zeaiter, J., Gomes, V.G., Romagnoli,

39

J.A., Barton G.W., and Gilbert, R.G., European Symposium on Computer Aided

Process Engineering (ESCAPE-11), Denmark, pp 823-828, 2001

61 "Modelling and Control of Molecular Weight and Particle Size Distributions in

Styrene Polymerisation", Zeaiter J., Gomes V.G., Romagnoli J.A., Barton G.W.,

Gilbert R.G., Proceedings, 6th World Congress, Melbourne, 23-27 Sept, 3107,

2001

62 “Process Systems Engineering Training On The World Wide Web”, Zahra N.

Jabiri, Jose A. Romagnoli, Proceedings, 6th World Congress, Melbourne, 23-27

September, 2001

63 “Robust data reconciliation based on a generalized objective function”, D. Wang,

J.A. Romagnoli, Proceedings, 15th IFAC World Congress, Barcelona, Spain, 21-

26 July, 2002

64 “Relay auto-tuning of multivariable systems: application to an experimental pilot-

scale distillation column”, G. Marchetti, C. Scali, J.A. Romagnoli, Proceedings,

15th IFAC World Congress, Barcelona, Spain, 21-26 July, 2002

65 “A robust strategy for joint data reconciliation and parameter estimation”, Wang

D., Joe Y.Y., Romagnoli J.A., ESCAPE-14, Lisbon, Portugal (2004)

66 “Robust and efficient joint data reconciliation – Parameter estimation using a

generalized objective function”, Joe Y.Y., Wang D., Romagnoli J.A., DYCOPS-

7, Cambridge, Massachusetts, USA (2004)

67 “A robust PCA modelling method for process monitoring”, Wang D., Romagnoli

J.A., ADCHEM-7, Hong Kong, China (2004

68 “Robust multi-scale strategy for multivariate process monitoring”, Wang D., Joe

Y.Y., Romagnoli J.A., (2004), ESCAPE-14, Lisbon, Portugal (2004)

69 “Optimal control for emulsion copolymerisation: Application within a DCS

environment”, Alhamad B., Romagnoli J.A., Gomes V.G., DYCOPS-7,

Cambridge, Massachusetts, USA (2004)

70 "Simulating the effect of shear strain rate on the colloidal stability in an emulsion

polymerisation reactor using computational fluid dynamics", Elgebramd R.,

Romagnoli J.A., Gomes V.G., ESCAPE-14, 2004

71 “Knowledge-based supervisory and diagnostic system for a fed-batch pilot scale

emulsion polymerisation facility”, Chew R., Abbas A., Gomes V.G., Romagnoli

J.A., BatchPro, Poros, Greece (2004)

40

72 “Towards Online Particle Characterisation Using Image Analysis”, Bhushan, B.,

A. Abbas, J A Romagnoli, 7th World Congress of Chemical Engineering,

Glasgow, Scotland (2005)

73 “Model-based optimisation for operational policies in seeded cooling

crystallisation+, Abbas A., Nowee S.M., Romagnoli J.A, 7th

World Congress of

Chemical Engineering, Glasgow, Scotland, 11-16 Sep. (2005)

74 “Nonlinear principal component analysis using radial basis function network and

polygonal lines”, Bhushan B., J A. Romagnoli, 7th

International Conference on

Cognitive Systems, Delhi, India (2005)

75 “Wavelet-Based Nonlinear Multivariate Statistical Process Control”, Maulud A.,

Wang D., Romagnoli J.A., Escape 15 European Symposium on Computer Aided

Process Engineering-15, Barcelona, Spain, pp. 1321-1326 (2005)

76 “Fault Detection Using Radial Basis Function Network and Polygonal Line”,

Bhushan, B., J A Romagnoli, D. Wang, 16th IFAC world congress, Prague,

Czech Republic (2005)

77 ”Using a hybrid plant and the internet to deliver experiential engineering

education, Abbas A., Orellana J., Rolandi P.A., Romagnoli J.A., 8th

UICEE

Conference on Engineering Education, Kingston, Jamaica, 7-11 Feb (2005)

78 “A Strategy for Feature Extraction of High Dimensional Noisy Data”, Bhushan

B., J A Romagnoli, Proceedings of the 25th

IASTED International Conference on

Modelling, Identification, and Control, Lanzarote, Spain (2006)

79 “Batch/Semi-Batch Process Fault Detection and Diagnosis using Orthogonal

Nonlinear Multi-Way PCA: Application to an Emulsion Co-Polymerization

Process”, A. Maulud and J. Romagnoli, ADCHEM 2006-International

Symposium on Advanced Control of Chemical Processes, Vol. 1, pp. 273-279,

Gramado, Brazil, April 2-5 (2006)

80 “A novel modular nonlinear network for fault diagnosis and supervised pattern

classification”, B. Bhushan and J. A. Romagnoli, ADCHEM 2006-International

Symposium on Advanced Control of Chemical Processes, Vol. 2, pp. 865-871,

Gramado, Brazil, April 2-5 (2006)

81 “On Data Processing and Reconciliation: Trends and the Impact of Technology”,

J.A. Romagnoli, P.A. Rolandi, Y.Y. Joe, and K.V. Ling, ADCHEM 2006-

International Symposium on Advanced Control of Chemical Processes, Vol. 2,

pp. 1029-1039, Gramado, Brazil, April 2-5 (2006)

41

82 “An Intelligent/smart Framework for Real time Process Monitoring and

Supervision”, Bhushan B., J A Romagnoli, International Congress

Methodologies for Emerging Technologies in Automation, Rome, Italy (2006)

83 “Optimal control of particle size in antisolvent crystallization operations”, M.

Nowee, A. Abbas, J.A. Romagnoli, ICheaP-8 PRESS-7, Ischia, Italy (2007)

84 “Separating touching and overlapping objects in particle images-an integrated

approach”, J. Khorat, A. Abbas, J.A. Romagnoli, ICheaP-8 PRESS-7, Ischia, Italy

(2007)

85 “Cluster analysis in process and environmental monitoring”, S Weaver, A.

Palazoglu, J.A. Romagnoli, ICheaP-8 PRESS-7, Ischia, Italy (2007)

86 “An integrated model-centric framework for joint parameter estimation/data

reconciliation on process systems”, D. Aragon, P. Rolandi, J.A. Romagnoli,

ICheaP-8 PRESS-7, Ischia, Italy (2007)

87 “Optimal control of particle size in antisolvent crystallization operations”, M.

Nowee, A. Abbas, J.A. Romagnoli, DYCOPS 07, Cancun, Mexico (2007)

88 “Control of particle size distribution in emulsion co-polymerization within mid-

course correction policy”, M. Halim, J.A. Romagnoli, DYCOPS 07, Cancun,

Mexico (2007)

89 “Model-based framework for ternary alloy electro deposition process: model

validation and parameter estimation”, M.E. Estrada, E.J. Podlaha, J.A.

Romagnoli, D. Aragon, DYCOPS 07, Cancun, Mexico (2007)

90 “Image Based Characterization and Molecular Modelling of Line-edge

Roughness on Positive Resist”, R. Mukherjee, A. Palazoglu, J. A. Romagnoli,

18th European Symposium on Computer Aided Process Engineering, B.

Braunschweig and X. Joulia (Editors) (2008)

91 “Robust (adaptive) dynamic data reconciliation and gross error estimation for

unknown error distribution based on the generalized T distribution”, D. Aragón,

P. A. Rolandi, José A. Romagnoli,, 18th European Symposium on Computer

Aided Process Engineering, B. Braunschweig and X. Joulia (Editors) (2008)

92 “A real-time optimisation engine for nonlinear model-based optimising control of

large-scale systems, P. A. Rolandi, J. A. Romagnoli”, 18th European Symposium

on Computer Aided Process Engineering, B. Braunschweig and X. Joulia

(Editors) (2008)

42

93 “Characterization of Different Surfaces Morphology in Heterogeneous Catalyst”,

R, Mukherjee, A. Palazoglu, J. A. Romagnoli , Nano Technology Conference

(2008)

94 “A Multi-resolution Multi-scale Computational Approach for Characterization

and Analysis of Nanostructured Surfaces”, R. Mukherjee, A. Palazoglu, J. A

Romagnoli, 10th International Symposium on Process Systems Engineering -

PSE2009, Salvador, Bahia, Brazil (2009)

95 “A Novel Approach for the Prediction of PSD in Antisolvent Based

Crystallization”, M. Grosso, O. Galan , R. Baratti, J. A. Romagnoli, 10th

International Symposium on Process Systems Engineering-PSE2009, Salvador,

Bahia, Brazil (2009)

96 “A Stochastic Approach for Anti-Solvent Addition Policy in Crystallization

Operations: An Application to a Bench-Scale Fed-Batch Crystallizer”, O. Galan,

M. Grosso, R. Baratti, J.A. Romagnoli, ADCHEM- 09, Istanbul, Turkey (2009)

97 “A Theoretical Nucleation Study of the Combined Effect of Seeding and

Temperature Profile in Cooling Crystallization, D. Widenski, A. Abbas, J.A.

Romagnoli”, 10th International Symposium on Process Systems Engineering-

PSE2009, Salvador, Bahia, Brazil (2009)

98 “On the topological analysis of industrial process data using the SOM”, F.

Corona, M. Mulas, R. Baratti, J.A. Romagnoli, 10th International Symposium on

Process Systems Engineering-PSE2009, Salvador, Bahia, Brazil (2009)

99 “A performance study of dynamic RTO applied to a large-scale industrial

continuous pulping process”, P. A Rolandi, J. A Romagnoli, 10th International

Symposium on Process Systems Engineering-PSE2009, Salvador, Bahia, Brazil

(2009)

100 “Evaluation of the Effect of the Solubility Model on Antisolvent Crystallization

Optimization”, D. J. Widenski, A. Abbas, J. A. Romagnoli, ADCHEM-09,

Istanbul, Turkey (2009)

101 “Dynamic Simulation and Optimization of a Urea Granulation Circuit”, I.

Cotabarren, D. Bertín, J. Piña, V. Bucalá, J.A. Romagnoli, ICheap-09, Rome,

Italy (2009)

102 “Evaluation of the Effect of the Solubility Model on Antisolvent Crystallization

Predicted Volume Mean Size”, D. J. Widenski, A. Abbas, J. A. Romagnoli,

ICheap-09, Rome, Italy (2009)

103 “Data analysis and inference for an industrial deethanizer”, F. Corona, M. Mulas,

R. Baratti, J.A. Romagnoli, ICheap-09, Rome, Italy (2009)

43

104 “A Stochastic Approach to Model Antisolvent Mediated Crystal Growth

Processes”, M. Grosso, O. Galan, R. Baratti, J. A. Romagnoli, ICheap-09, Rome,

Italy (2009)

105 G. Robertson, A. Palazoglu, J.A. Romagnoli, “Integrated optimal schedule for

short term loading, unloading and production of oil refineries”, 20th European

Symposium on Computer Aided Process Engineering – ESCAPE20, Ischia, Italy

(2010)

106 “Integrated framework for enterprise management-a synergistic approach

towards sustainable biorefineries”, P. Sharma, B.R. Sarker, J.A. Romagnoli, 20th

European Symposium on Computer Aided Process Engineering – ESCAPE20,

Ischia, Italy (2010)

“A Performance Study of a Novel Dynamic Real-Time Optimization Engine

Applied to an Industrial Continuous Pulping System”, P. A Rolandi, J. A

Romagnoli, Symposium on Dynamic and Control of Processes-Dycops 2010,

Belgium (2010)

107 “On the Prediction and Shaping of the PSD in Crystallization Operations”, M.

Grosso, O. Galan, R. Baratti, J. A. Romagnoli, 20th

European Symposium on

Computer Aided Process Engineering – ESCAPE20, Ischia, Italy (2010)

108 “A Stochastic Formulation for the Prediction of PSD in Crystallization Processes:

Comparative Assessment of Alternative Model Formulations”, M. Grosso, O.

Galan, R. Baratti, J. A. Romagnoli, Symposium on Dynamic and Control of

Processes-Dycops 2010, Belgium (2010)

109 ““Integrated Optimal Schedule for the Short term Loading, unloading and

Production of Oil Refineries”, U. Yüzgeç, A. Palazoglu, J. A. Romagnoli,

Symposium on Dynamic and Control of Processes-Dycops 2010, Belgium (2010)

110 “A support system for strategic decision analysis towards sustainable, multi-

product biorefineries”, P. Sharma*, B.R. Sarker, J.A. Romagnoli, ICheap-11,

Florence, Italy (2011)

111 “Local linear regression for soft-sensor design with application to an industrial

deethanizer”, Z. Zhu, F. Corona, A. Lendasse, R. Baratti, J. A. Romagnoli,

Proceedings of the 18th IFAC World Congress, Volume 18, Part 1 (ISBN: 978-3-

902661-93-7), p 459-464, Milan Italy (2011)

112 “Dynamic evolution of PSD modelled using an Ornstein-Uhlenbeck process

approach”, G. Cogoni, M. Grosso, R. Baratti, J. A. Romagnoli, Proceedings of the

44

18th IFAC World Congress, Volume 18, Part 1 (ISBN: 978-3-902661-93-7), p

2839-2844, Milan Italy (2011)

113 “Monitoring crystal growth based on image texture analysis using wavelet

transformation”, B. Zhang, A. Abbas, J. A. Romagnoli., Proceedings ADCHEM

International Symposium on Advanced Control of Chemical processes, July

Singapore (2012)

114 “Techno-economic analysis of multi-product biorefineries”, P. Sharma*, J.A.

Romagnoli, ICheap-13, Milan, Italy (2013)

115 “Image-based multiresolution ANN sensor for PSD in crystallization operations”,

B. Zhang, R. Willis, C. Fois, S. Tronci, R. Baratti, J.A. Romagnoli, ICheap-13,

Milan, Italy (2013)

116 “Global stochastic model formulation for PSD prediction in crystallization

operations ”, G. Cogoni, R. Baratti, J.A. Romagnoli, ICheap-13, Milan, Italy

(2013)

117 “Real-time optimal control of non-isothermal antisolvent crystallization

processes”, N. Ghadipasha, S. Tronci, R. Baratti, J. A. Romagnoli, 12th

International Symposium on Process Systems Engineering and 25th European

Symposium on Computer Aided Process Engineering, 31 May–4 June,

Copenhagen, Denmark (2015)

118 “A Stochastic Formulation and On-line Monitoring technique for the

Measurement of Salt Concentration in Non-Isothermal Antisolvent

Crystallization Processes”, N. Ghadipasha, R. Baratti, S. Tronci, J. A.

Romagnoli, IChEAP’15, Milan Italy (2015)

119 “A Framework for Optimal Design of Integrated Biorefineries under Uncertainty”,

A. Geraili, J. A. Romagnoli, IChEAP’15, Milan Italy (2015)

120 “A Modelling Framework for Optimal Design of Renewable Energy Processes

Under Uncertainty”, A. Geraili, J. A. Romagnoli, 12th International Symposium

on Process Systems Engineering and 25th European Symposium on Computer

Aided Process Engineering, 31 May–4 June, Copenhagen, Denmark (2015)