ivf, gift, zift, tet, icsi,art,obstetrics, gynecology, infertility
DESCRIPTION
IVF Products » Lab + GuardConceptThe LAB + GUARD is developed to improve the laboratory air quality making it nearly equal to clean air. Thus replenishing and subsequently nourishing the entire laboratory, making it safe for the sensitive procedures to be executed. This is achieved by a number of inclusions and their applications all of which are simple, cost effective and user friendly. The positive pressure system uses the basic principle of "Over Pressure or positive pressure in a room which restricts the entry of outside air ". This is achieved by absorbing the circulating air outside theIVF Lab (Room) and then subsequently passing the same through a series of 4 stage filters thus making it quite IVF friendly. Thus ultimately the effective, circulating air in the IVF lab reaches a near clean air status, provides a positive pressure, reduces the CFU count, eliminates the SPM, VOCs and CACs.Ensure Net Flow OutIn any HVAC / air flow design it is essential that net flow is going out of the room. This means room air volume and pressure should be slightly higher than adjoining areas / rooms. This will keep out any toxic fumes trying to come in. IVF labs which are not having adequate positive pressure are suceptible to risk of contamination.DesignThe LAB + GUARD has been designed with State of the Art technology using 4 stage filtration system. The unique filter combination filters out air and gas contaminant thus by giving most suitable air for gametes and embryos. LAB + GUARD system contains a unique 4 stage filtration system containing Prefilter, Hepa Filter and unique blend of activated carbon and alumina, which ensures wide variety of Gases, particular contaminants are oxidized or are absorbed. The LAB + GUARD has been designed to reduce the microbial air flora to the minimum level.Reduces CFU, Reduces VOCThe unique design and the concept of LAB + GUARD positive pressure system not only reduces VOC content in the air but also the CFU count in the IVF Lab. The LAB + GUARD not only protects embryos and gammas but also protects embryologists who is the most affected otherwise.TRANSCRIPT
We make it possible
Positive Pressure System
LG 300
Lab Guard
TECHNICAL SPECIFICATION
Dimensions
470 mm590 mm
80
0 m
m
specifications subject to change without notice
Ordering information
Lab Guard LG 300 100 120 Volts 60 Hz order code FX 2045Lab Guard LG 300 220 240 Volts 50 Hz order code FX 2046Spare Filter Set order code FX 2047Return Blower order code Fx 2048
Blower-German make : Backward impeller type Pre Filter : Synthetic PU washableHepa Filter : Efficiency 99.97% @ 0.3 micronsVOC Filter: : Unique blend of activated carbon and aluminaUnit capacity: : 350 CFMMounting: : To be done outside VF Lab on any WallPower consumption: : 90 Watts maximumFilter replacement as per auto indicationElectrical supply : 100/110 volts OR 220/240 volts 50/60 Hz
Distributor
C
Q
Traceability calibration in accordance with national and international standards, NIST USA
Individual and expressive quality control certificate
www.shivaniscientific.comFor more details go to
Shivani Scientific Industries (P) Ltd+ 91 22 2845 6768+ 91 22 2845 6769+ 91 22 2845 6770+ 91 22 2845 7140+ 91 22 2845 6766
Tel -
Fax -e-mail [email protected] [email protected]
26A Raju Industrial Estate, Penkar Pada RoadNear Dahisar Check Naka, Mira-401104Dist. Thane (Mumbai) Maharashtra, INDIA
Positive Pressure SystemLab Guard
The LAB+GUARD is developed to improve the laboratory air quality making it nearly equal to clean air. Thus replenishing and subsequently nourishing the entire laboratory, making it safe for the sensitive procedures to be executed. This is achieved by a number of inclusions and their applications all of which are simple, cost effective and user friendly.The positive pressure system uses the basic principle of “Over Pressure or positive pressure in a room which restricts the entry of outside air”. This is achieved by absorbing the circulating air outside the IVF Lab (Room) and then subsequently passing the same through a series of 4 stage filters thus making it quite IVF friendly. Thus ultimately the effective, circulating air in the IVF lab reaches a near clean air status, provides a positive pressure, reduces the CFU count, eliminates the SPM, VOCs and CACs.
The LAB+GUARD has been designed with State of the Art technology using 4 stage filtration system. The unique filter combination filters outair and gas contaminant thus by giving most suitable air for gametes and embryos.LAB+GUARD system contains a unique 4 stage filtration system containing Prefilter, Hepa Filter and unique blend of activated carbon and alumina, which ensures wide variety of Gases, particular contaminants are oxidized or are absorbed. The LAB+GUARD has been designed to reduce the microbial air flora to the minimum level.
CONCEPT
DESIGN
Every care has been taken in designing to make sure that air absorbed is thoroughly cleanedfor contaminants and to reduce bacterial count in IVF Lab. The LAB+GUARD design also facilitates introduction of fresh air into the air circuit which gives maximum safety from Carbon dioxide released into the IVF Lab by CO2 Incubators and also it protects embryologists from gas mixtures released on work stations.
OPERATING SECURITY
Positive Pressure System
LG 300
Lab Guard
The unique design and the concept of LAB+GUARD positive pressure system not only reduces VOC content in the air but also the CFU count in the IVF Lab. The LAB+GUARD notonly protects embryos and gammas but also protects embryologists who is the most affected otherwise.
REDUCES CFU, REDUCES VOC
In any HVAC/air flow design it is essential that net flow is going out of the room. This means room air volume and pressure should be slightly higher than adjoining areas/rooms. This will keep outany toxic fumes trying to come in. IVF labs which are not having adequate positive pressure are suceptible to risk of contamination.
ENSURE NET FLOW OUT
The LAB+GUARD has automatic indication for Filter change and the design facilitate extremely easy replacement of filters even by non technical staff. Other than filter change it is virtually maintenance free.
MAINTENANCE
If your lab does not have regulated fresh air intake or
positive pressure design, there are every chances
that your embryologists are breathing out CO2 tanks
emptied ever year. Since CO2 can not be absorbed
or filtered by Indoor air purifiers or filters. The
LAB+GUARD facilitates introduction of fresh air and
reduces the risk of high CO2 concentration into the
IVF Lab.
WHO BREATHS CO2 IN YOUR IVF LAB ?
The LAB+GUARD also houses a unique automatic indication system whereby the user is informed when to change the filters, and not “every quarterly”. This feature not only gives tremendous relief to the user for tracking the stipulated time of change but also saves lot of money.
CHANGE FILTERS AS PER USAGE
The LAB+GUARD team helps you in evaluation of possibilities to improve air quality in your lab. Ifyou are upgrading, expanding or setting up new lab contact us for technical assistance.
UPGRADING, EXPANDING ORSETTING UP NEW IVF LAB?
RETURN BLOWERThe return blower is utilised to circulate back the air of IVF lab to room where LAB+GUARD hasbeen fitted.
Sp
lit A
/C
LA
B G
UA
RD
LA
B G
UA
RD
Ret
urn
Blo
wer
Fresh Air
IVF LAB UTILITYROOM