itu-t study group 5 equipment resistibility · 07.11.01 workshop on: “emc, safety and emf effects...
TRANSCRIPT
![Page 1: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/1.jpg)
International Telecommunication Union
Workshop on:“EMC, safety and EMF effects in telecommunications”
ITU-T Study Group 5
Equipment ResistibilityEquipment ResistibilityPhilip Day
Telstra, AustraliaRapporteur, Questions 4 and 13
![Page 2: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/2.jpg)
207.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Introduction
o Protection of an installation may require a combination of:• Lightning protection for the building• Protection on incoming lines• Resistibility of equipment• Earthing and bonding of installation
o This presentation is about resistibility and protection of equipment
![Page 3: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/3.jpg)
307.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Introduction
o Background on why Q1 activeo SG 5 role in equipment protectiono Relevant Recommendationso Resistibility and protectiono Damageo SG 5 Objectiveo Using Recommendations
![Page 4: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/4.jpg)
407.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Background on why Q1 active
o In the last study period it was revealed that:
• Damage was occurring from lightning and power induction
• Damage costing operators many millions of dollars per annum
• 80% of operators used different requirements
• The access network was a problem
![Page 5: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/5.jpg)
507.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
SG 5 role in equipment protection
o SG 5 is unique in overvoltage protection• Ensures coordination of the
equipment and external protection• Considers installation practices and
their effect on resistibility requirements
![Page 6: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/6.jpg)
607.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Relevant Recommendations
K.20ExternalPorts
K.41InternalPorts
K.45ExternalPorts
K.21ExternalPorts
K.22ISDNPorts
K.44Test Methods
TelecomCentres
AccessNetworks
CustomerPremises
Components
K.12GDTs
K.28SSAs
K.15
K.17
TrunkNetwork
Protection
Tests
K.30PTCs
K.36Selectionof
LegendNew recommendationsRevised recommendations
![Page 7: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/7.jpg)
707.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Resistibility and protection
o Preventing equipment damage may require a combination of resistibility and protection• Resistibility is
• The ability of the equipment to withstand an overvoltage or overcurrent
![Page 8: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/8.jpg)
807.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Resistibility and protection (cont)
• Protection is• The addition of primary protection to
prevent damage from larger surgeso Need to check that the protector operates
and protects the equipment
![Page 9: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/9.jpg)
907.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Resistibility and protection (cont)
• Primary protection maybe installed by the operator and have to work with many types of equipment• Requires coordination of resistibility and
component recommendations• Nominal firing voltage of primary
protector may vary due to local regulations eg 230, 250, 350 or 600 V
![Page 10: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/10.jpg)
1007.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Resistibility and protection (cont)
• A manufacturer’s equipment has to work in many operators environments• Need a single environment requirement
so that manufacturers do not need multiple designs
• SG 5 agreed to have both a “basic” and “enhanced” requirement
![Page 11: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/11.jpg)
1107.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Damage
Visible damage
![Page 12: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/12.jpg)
1207.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Damage (cont)
Visible damage
![Page 13: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/13.jpg)
1307.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Damage (cont)
Concealed damage
![Page 14: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/14.jpg)
1407.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
SG 5 Objective
o Reduce damage due to overvoltages through:• Requirements for resistibility
• Prepare new ones as required• Revise existing ones as required
• Testing
![Page 15: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/15.jpg)
1507.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Revision of Recommendations
o Recommendations are revised as a result of feedback• Q10 “Methodology for solving
electromagnetic problems in telecommunications installations” will provide information on field damage
• Contributions are used by members to propose changes
![Page 16: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/16.jpg)
1607.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Laboratory testing
![Page 17: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/17.jpg)
1707.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Using Recommendations
o Example of specifying requirements for equipment in a telecommunication centre• K.20 for external ports including
• Symmetric pair• Coaxial• Dedicated power feed• Mains power
![Page 18: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/18.jpg)
1807.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Using Recommendations (cont)
• K.41 for internal ports • The operator or Administration needs
to choose either the Basic or Enhanced requirement
![Page 19: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/19.jpg)
1907.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Using Recommendations (cont)
• Enhanced requirement may be chosen for one or more of the following reasons• Damage is occurring• High levels of power induction• High grade of service requirements
![Page 20: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/20.jpg)
2007.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Using Recommendations (cont)
o The operator will also need to decide when to install primary protection• Recommendation K.11 provides
guidance on when to install primary protection
• More important to protect pairs with more than one service or important services
![Page 21: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/21.jpg)
2107.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Using Recommendations (cont)
• When power induction damage is occurring
• When lightning damage is occurring
![Page 22: ITU-T Study Group 5 Equipment Resistibility · 07.11.01 Workshop on: “EMC, safety and EMF effects in telecommunications ” 2 ITU-T Study Group 5 Introduction o Protection of an](https://reader036.vdocuments.mx/reader036/viewer/2022070901/5f43d576c92d227cc25179d9/html5/thumbnails/22.jpg)
2207.11.01Workshop on: “EMC, safety and EMF effects in telecommunications”
ITU-TStudy Group 5
Question time
?