User Guide V 1.3

SAS/SATAHDD Duplicator

ITS Series

EN

OK

ESC

3

Content IndexContent Index 3Disclaimer of Warranties 5Important Notice 5Safety Precautions 5⌘ Preparation Tips before You Start 6⌘ Notice Symbols 6

1 Product OverviewOverview 7Features 8Hardware 9➊ Appearance 9➋ LCD Configuration 10➌ How to use IDE module 11➍ How to place SAS module 11➎ How to dismantle SAS module 11Reminder⌘ Prepare before You Start 12

2 Function TableFunction Table 13

3 How to Copy HDDs⌘ Start to Copy 15⌘ Set-up before Copy Tasks 16

➊ Set Copy Area of HDD 16① System and Files 17② All Partition 17③ Whole HDD 18④ Percentage(%) 18

➋ Set Tolerance of Bad Track 19➌ Auto Skip Lower-Speed HDDs 19➍ Auto Skip Lower-Speed Source 20

⌘ Troubleshooting of Copy Fails 20

4 How to Confirm Copy Accuracy ⌘ Confirm Accuracy by Comparison 21⌘ Setting of Compare Function 21

5 How to Erase HDDs⌘ Data Sanitization 22⌘ Setting of Erase Function 22

➊ Quick Erase 22➋ Full Erase 23➌ DoD Erase 23➍ DoD Erase Comp 23

➀ Overwrite by fixed method 24➁ Overwrite by random method 24

❺ Seven Pass Erase 24❻ Secure Erase 25❼ Enhanced Secure Erase 25❽ NSA Erase 25

6 Update BIOS⌘ How to Update BIOS 26 ➊ Update by HDD 26 ➋ Update by USB Drive 27

7 PC-Monitoring the Work StatusReal-Time PC-Monitoring⌘ How to Use Monitoring on Log 28⌘ Preparation before Starting 28⌘ Operation of PC-Monitoring 29Log Report⌘ Browse Log Report through PC 29⌘ Export Log Report 31

8 FAQSystem FAQ 32PC-Monitoring FAQ 33

9 SpecificationProduct Specification 34

5

Warranty & NoticeDisclaimer of WarrantiesAll ITS series duplicators are made specifically for data backup with legal authorities from copyright owners. Any unauthorized action of copyright is strictly prohibited, and the manufacturer disclaims all warranties or representations of illegal actions by users.The manufacturer also disclaims any liability for any loss or damage due to not being able to perform its undertakings or provide any of the services attributable to any events or circumstances beyond our control.Users agree and accept all statements above as soon as purchasing our products. This manual contains materials that should be intended for personal use, all right reserved. No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer. The information present in this manual is subject to change without prior notice.

Important NoticeRead the complete operation instruction carefully contributes to better operation.Make sure the source device is correct and workable.To guarantee data consistency, we highly recommend the capacity of source and targets should be the same.It is strongly suggested to use "Copy+Compare" to achieve a perfect duplication.

Safety Precautions ☉ The warranty will expire if damage is incurred resulting from noncompliance with theses operating instructions.

☉ Store the equipment safely when not in used and keep out of the reach of children and infants.

☉ Please turn off the power before replace the socket. ☉ Never turn off the power while processing the firmware update. ☉ Use only approved power sources. ☉ The product is only suitable for operation in dry, dust free, clean environment. Do not allow liquids or foreign objects to enter. Failure to do so may severely damage your duplicator.

6

Warranty & Notice⌘ Preparation Tips before You Start

☉ Make sure to use stable power supply. ☉ Please use at clean & dry environment. ☉ Please keep the environment well ventilated. ☉ When the duplicator operates, it is normal for the machine to heat up. ☉ Please do not move the duplicator during operation to ensure better operation. ☉ Please do not remove HDDs during operation to avoid damage. ☉ Please use power supply of its original manufacturer to ensure working normal. ☉ Eliminate Static electricity: Static electricity may cause duplication error. Please pay attention to the duplicator environment and operators’ equipment. It is recommended to purchase static electricity elimination equipments to avoid static electricity shock when stay in high static electricity.

⌘ Notice SymbolsSpecial items, procedures, or notes should be noticed by users before operation.

☉ Note: It refers to related operations on the duplicator, special details, tips to know, suggestions or more effective operation.

☉ Caution: It refers to operations need to be followed or to be careful to avoid mistakes.

7

Product Overview 1OverviewThe ITS series HDD duplicator is specially designed for professional use. The smart Quick Copy (System and Files) mode supports FAT16/32/64, NTFS(Windows), ext2/3/4(Linux), HFS/HFS+/HFX(Mac) formats and can copy only data contained area, which therefore highly increases the production efficiency. Furthermore, the innovated design of interface can help you easily swap HDDs during operation and reduce the time and effort while repairing.

The ITS series has ultra high speed, and each interface is independent. That's why no matter are 1 target or 15 targets duplication, it has the same performance of ultra high transmission speed, far beyond PC-based duplicators.

Comply with the U.S. Department of Defense's erasing standard (DoD5220.22 M) and Secure Erase (NIST800-88). It is important to make sure the data inside the disregarded HDD will not be retrieved and can be safely transferred.

OK

ESC

8

1 Product OverviewFeaturesUltra High Speed Ultra high transmission speed for each port operating individually.

Auto Power Control SystemTo protect the HDD from damage during removal from the duplicator.

Replaceable SAS Interface ModuleRevolutionary easily replaceable SAS interface module. Check accessories page. Easy to plug in and pull out HDDs, easy to replace new module, and connect IDE converter.

Support 3.5", 2.5" and 1.8" HDDBoth SAS and SATA co-exist without requiring an additional adapter or a manual change interface cable.

Ultra High Speed Data "Compare" FunctionThe very special hardware bit-for-bit "Compare" function is the most secure way to 100% guaranteed accuracy of data duplication. It takes the same speed as copying. There is no other duplicator that can do such a performance so fast and accurate.

Quick Copy ModeThis mode can identify the HDD formats of FAT, NTFS, Mac(HFS, HFSX, HFS+)and Linux. It will only copy the data and system contained area, which can highly enhance the copying efficiency.

4 Kinds Of Copy ModesThe four different copy modes to meet different work situation needs, Systems and Files, All Partition, Whole HDD, Percentage Copy.

7 Erase MethodsQuick Erase, Full Erase, DoD Erase, 7-Pass Erase, Secure Erase, Enhanced Secure Erase and NSA Erase.

Large Duplication Targets QuantitySupport up to 15 targets duplication at the same time.

9

Product Overview 1Hardware➊ Appearance

OK

ESC

Indication LED

2.5"/ 3.5" HDD are bothadaptable into the HDD slot

SATA module interface

Operation buttons

LCD

Front view

10

1 Product Overview

Power supply

Power switch

Fan switch

USB port for PC-link

Back view

OK

ESC

Indication LED on each slotYellow: PoweringGreen: PassRed: Fail

RedGreen

Yellow

LED Light

➋ LCD Configuration

FunctionNumber oftarget HDD Total size Forward Confirm/OK

Time elapsed and copy progress % Copied processed size

Port # of the slowestcopying HDD

Backward Cancel/Back

11

Product Overview 1➌ How to use IDE module?

OK

ESC

➍ How to place SAS module?

OK

ESC

➎ How to dismantle SATA/SAS module?

OK

ESC

① Loosen the screws

② Pull the module forward, and take it out.

12

ReminderReminder⌘ Prepare before You Start

☉ It is suggested to turn off fan when duplicate HDD other than 3.5", which reduces vibration while fan spinning.

Power supply

Power switch

Fan switch

USB port for PC-link

☉ Make sure to use stable power supply.

☉ Please use a t c lean & d ry environment.

OK

ESC

13

Function Table 2Function TableFunction Description

1. Copy Copy data from source HDD to targets. (There are four copy areas for selection at function 6.2.)

2. Compare Comparison between the source and targets to make sure copy accuracy

3. Copy+Compare Execute compare function automatically after copy

4. Erase

4.1 Quick EraseErase the INDEX of HDD, and take very short time

4.2 Full EraseErase the whole HDD

4.3 DoD EraseErase HDDs three times complying with USA Department of Defense (DoD) standard

4.4 DoD EraseComp Erase HDDs three times complying with USA Department of Defense (DoD) standard and bit by bit to check if data is completely erased.

4.5 7-Pass EraseErase and overwrite whole HDDs for 7 times, complying with US Department of Defense’s erase standard DoD 5220.22-M ECE.

4.6 Secure EraseErase whole HDD, even HPA/DOC or other not loadable area, the international authorized high standard (complying with NIST800-88)

4.7 Enhanced Secure EraseAdvanced international authorized high standard Erase (complying with Extended NIST800-88)

4.8 NSA EraseOverwrite all HDD data complying with NSA cleaning standard.

5. Utility

5.1 Show Disk InfoShows HDD’s basic information such as HDD model name and capacity.

5.2 Update System

5.2.1 Update BIOSTo update the system firmware via the HDD.

5.2.2 Format HDDTo format the HDD with a 2GB FAT partition in order to quickly save firmware in the HDD.

5.3 System InfoThis function will show information of the duplicator system, including controller model number and software version.

6. Setup

6.1 Copy AreaSetup copy mode.

6.1.1 System and FilesSet to copy source HDD's data area only.

6.1.2 All PartitionsSet to copy source HDD's.

6.1.3 Whole HDDSet to copy the whole source HDD.

6.1.4 Percentage(%)Set up percentage range of HDD for copy.

6.2 Skip ErrorSet to ignore error of source HDD while copying. (0 -65535 Set to ignore error of source HDD.)

6.3 Minimum SpeedSet to check HDDs’ minimum speed as 10,20,30….,300MB/second or don’t check.

6.4 Check Source Minimum Speed Set to check source minimum speed or don’t check.

6.5 Language Select preferred language. (English and Japanese are available for selection)

14

2 Function Table

6. Setup6.6 Advanced Setup

6.6.1 Copy Unknown Format

Copy UnknownCopy unknown area when the device can not identify the format.

Skip UnknownSkip copy unknown area when the device can not identify the format.

6.6.2 Erase MasterSetup to erase source HDD or not.

DisableDisable erase source HDD.

EnableEnable erase source HDD.

6.6.3 Erase Pattern

ONE ByteA random character to be written into every byte.

Big Random DataA set of random character to be written into a set of area.

6.6.4 Wait HDD TimeAuto start time after plugging in HDD. Able to set from 0 to 30 seconds.

6.6.5 Lock KeyAfter this function is selected, only OK and ESC key are working.

Do Not Lock Key

Do Lock Key

6.6.6 Fan ControlSwitch on/off the fan.

6.6.7 Transfer RateSelect the proper transfer rate UDMA2-7. 7 is the fastest.

6.6.8 Stop Motor TimeTo set the time waited for the motor to stop from 1-~20 seconds after executing funciotn.

6.6.9 Adjust ClockAdjust system time clock.

6.7 Restore DefaultBack to original manufacturer setting.

7. Log Manager

7.1 Out Today Report: Output today’s log records

7.2 Out Recent ReportOutput the log records in recent 1day to 28 days.

7.3 Out Period DataOutput the log records in a specific date.

7.4 Advanced FunctionClean out the log records and setup the password.

7.4.1 Clear ALL LogDelete all the log records after entering password.

7.4.2 Setup PasswordReset new password for cleaning log records.

15

How To Copy HDDs 3How to Copy HDDs⌘ Start to CopyStep 1Prepare a source HDD and target HDD (*it's strongly recommended to the size of source and target are the same)

Source HDD Target HDD

Note ☉ Assemble adaptors if user needs to copy device with other interface, e.g. IDE, eSATA, mSATA.

Step 2Place source HDD at source port (the first port), targets HDD to other ports.

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

Step 3Use ▲▼ to select "1. Copy" then press "OK". Duplication will proceed.

Note When all the target HDD ports are plugged, duplicator would start copying automatically. If not all are plugged, the number of targets shows on LCD. Press "OK" to start.

The information below shows on LCD during duplication.

16

3 How To Copy HDDs

Note ☉ The number shows in the ( ) is the port # of the slowest HDD. ☉ Press ▲▼ together for 5 seconds to stop operation on the slowest HDD. ☉ It is able to use "On-Time Monitor" feature to check operation speed of every port.

Step 4Quantity of copy OK/Fail and duplication time would show on LCD after duplication completes.

⌘ Set-up before Copy TasksPlease pay attention to the following settings before copy.

❶ Set Copy Area of HDDChoose appropriate copy area can greatly reduce operation time and have better efficiency. There are four copy modes with different copy area : ① System and Files, ② All available partition area, ③ Whole HDD, ④ User set the percentage range of HDD.

17

How To Copy HDDs 3Time

Time based on %

Time

Time

Source

Quick Copy

Data Only

Par tit ion Copy

All Partition

Percentage Copy

%Percentage

Whole Copy

Whole HDD

HighEfficiency

Copy source partition area to targets Copy selected percentage

100％ bit-by-bit whole HDD copy

花費時間

花費時間 依％決定

花費時間

花費時間

母 盘

快速拷貝Data Only

有效分區拷貝All Partition

百分比拷貝%Percentage copy

全盤拷貝Whole HDD

效率高

透過系統自動分析只需花費拷貝資料區的時間！

將母盤有效的格式分區完整拷貝到子盤 可任意選擇欲拷貝的區域

100％位對位拷貝整個硬碟

花费时间

花费时间 依％決定

花费时间

花费时间

母 盘

快速拷贝Data Only

有效分区拷贝All Partition

百分比拷贝%Percentage copy

全盘拷贝Whole HDD

效率高

透过系统自动分析只需花拷贝资料区域的时间！

将母盘有效的格式分区完整拷贝到子盘 可任意选择欲拷贝的区段

100％位对位克隆全盘硬盘

Copy Area

Spend time in copying data area only

① System and Files (Quick Copy/Compare)It will copy source HDD's System and Files instead of the whole HDD. The system will analyze the source HDD and identify the data area to copy. As long as the source HDD's data within the target HDD's space, the copy will be processed. FAT16/32/64, NTFS, ext2/3/4, HFS+, HFS, HFX are supported for this copy mode.

Only 120G data area will be copied, it takes 12mintues.

Source

Partition 1(150G)Data 30G

Partition 1(200G)Data 90G

500GB

Duplication Target

500GB

② ALL Partitions

18

3 How To Copy HDDsThis mode will bit by bit copy all of the partitions no matter there is data exist or not. The capacity of target HDD has to be bigger than the partition required capacity

500GB 500GB

Source

Partition 1(150G)Data 30G

Partition 1(200G)Data 90G

Duplication Target

Only 350G partition area will be copied, it takes 48mintues.

③ Whole HDDIt is to copy the whole source HDD, no matter of the content, format, partition or empty space. This mode will take much more time to duplicate the source HDD completely.

500GB 500GB

Source

Partition 1(150G)Data 30G

Partition 1(200G)Data 90G

Duplication Target

Entire 500GB HDD will be copied.

④ Percentage(%)Copy the percentage selected of source HDD.

19

How To Copy HDDs 3

25％

32％

500GB

25％

32％

500GB

Source Duplication Target

Only copy the selected area, other area or data will not be copied.

Note Duplication time is affected by "transfer speed of HDD".

Below is one example of copy area selectione.g. There are two partitions in one 500GB HDD. Data and OS(120GB) are saved in the partition.

System and files

500GB

All partition

500GB

Whole HDD

500GB

Copy/Compare area 30G+90G= 120G

Copy/Compare area 150G+200G= 350G

Copy/Compare area500G

Note ☉ It is recommended to execute "2.Compare" after Copy to confirm the accuracy. ☉ It is recommended to copy data by function "3.Copy+Compare".

❷ Set Tolerance of Bad TrackSelect function "6.2 Skip Error" to set the number of error you accept to skip during copy process. If the HDD is very critical for content correctness, it is strongly recommended to keep the Skip Error to be "0"

20

3 How To Copy HDDs

➌ Auto Skip Lower-Speed HDDsSet to check HDDs’ lowest tolerance speed. Users can choose “Don’t care” or setthe speed value among 10/20/30~300MB/Second. The system will skip any HDDwhich cannot reach the minimum speed. This setting enables to speed up copyingand select HDD speed higher than the setting.

➍ Auto Skip Lower-Speed SourceUsers can choose “Yes” or “No” to check speed of source HDDs or don’t check.

⌘ Troubleshooting of Copy Fails ☉ Check if too many bad tracks on HDDs cause duplication failures.

☉ Check the setting of "6.2 Skip Error". Reset the number to 0 and copy error disks again.

☉ Make sure all data cables are properly and firmly connected.

21

How To Confirm Copy Accuracy? 4How to Confirm Copy Accuracy⌘Confirm Accuracy by ComparisonStep1 Prepare source HDD and target HDD.

Source HDD Target HDD

Step 2 Place source HDD at source port, targets HDD to other ports.

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

Step 3Use ▲▼ to select "2.Compare" then press "OK". Data compare will proceed.

Note When all the target HDD ports are plugged, duplicator would start copying automatically. If not all are plugged, the number of targets shows on LCD. Press "OK" to start.

⌘Setting of Compare FunctionIt is able to set compare area of HDD at function "6.1 Copy Area".There are four different compare area for selection : ① System and Files, ② All available partition area, ③ Whole HDD, ④ Percentage Compare.

Note It is recommended to execute Compare after Copy to confirm the accuracy.

22

5 How To Erase HDDsHow to Erase HDDsNote Please notice the data within the HDD will be erased after executing the function.

To cancel operation of any erasing mode, press <ESC/X> key and hold continuously for 3 seconds to exit any erasing tasks.

⌘Data SanitizationStep 1Prepare the HDD for erasure.

Source HDD Target HDD

Step 2Insert the HDD into target port.

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

OK

ESC

Note Function "6.7.2 Erase Master" is to determine erase source HDD or not. The default setting is "Disable erase source HDD".

Step 3Use ▲ ▼ to select the desired erase method, then press "OK". Data Erase will proceed.

⌘Setting of Erase FunctionThere are several erase methods: Quick Erase, Full Erase, DoD Erase, DoD Erase Comp, Seven Pass Erase, Secure Erase, Enhanced Secure Erase and NSA Erase.

23

How To Erase HDDs 5❶ Quick EraseThe function will ONLY erase the index of the HDD. It is the quickest way to erase HDD. It will damage the data in HDD, please make sure you have backup all important data before using this function.

❷ Full EraseThe function will erase the whole sectors on the target HDD. It will take longer time than quick erase. It will damage the data in HDD, please make sure you have backup all important data before using this function.

❸ DoD EraseThis is to comply with the U.S.A. Department of Defense (DoD 5220) standard to fully erase the HDD three times bit by bit to rewrite HDD to guarantee the data was deleted. It will damage the data in HDD, please make sure you have backup all important data before using this function.

❹ DoD Erase CompBesides DoD erase, this function will also execute compare function to make sure the random bit was correctly written. This way of erase is to erase HDD over each sector three times: the first time with zeros (0x00), second time with 0xFF and the third time with random characters. There is one final pass to compare random characters by reading. It will damage the data in HDD, please make sure you have

24

5 How To Erase HDDsbackup all important data before using this function.

Select random pattern

➀ Overwrite by fixed method

37373737373737373737373737373737373737373737373737373737373737373737373737373737

➁ Overwrite by random method

26AE891DF74519D55CE6621457E48AAB6890DD51473DAA9A82BBE55713C4859CBFFA147

❺ Seven Pass EraseThe mode fully erases the HDD for 7 times bit-by-bit to overwrite HDD data and guarantees data not recoverable. The 7-Pass Erase mode spends 7 times longer than 1-Pass erase mode.

25

How To Erase HDDs 5

❻ Secure EraseThe international authorized high standard Secure Erase function, it complies with standard of secure erase (NIST 800-88). Secure Erase will remove all data from a drive and will not be recoverable, including hidden, unreachable areas. Even HPA/DCO or other data area which are not able to load, can be erased all together.

❼ Enhanced Secure EraseEnhanced Secure Erase complies with advanced standard of secure erase (ExtendedNIST 800-88). Any HDD with security command supported could execute this mode successfully.

Caution Please DO NOT disrupts Secure Erase/Enhanced Secure Erase during operation. Otherwise, it might cause error on reading the HDDs which cannot be identified by the duplicators and computers. If fails, execute secure erase mode again.

❽ NSA EraseThe NAS erasing mode will overwrite all HDD data, complying with NSA approved standard, NSA clearing and sanitizing standards.

26

6 Update BIOSUpdate BIOS⌘How to Update BIOSThere are 2 ways for BIOS update.

❶ Update by HDDStep 1Prepare one HDD and connect it to source port, then select function "5.2.2 Create Update HDD".

Step 2Format the HDD

Note ☉ Before updating firmware, one FAT, 2GB partition will be formatted in HDD. That would reduce searching time, and speed up firmware update. ☉ The data saved in this HDD will be erased.

Step 3Download the latest firmware from PC and save it in HDD.

27

Update BIOS 6Step 4Insert HDD into source port (first port), select function 5.2.1 Update BIOS. Update would complete in one minute.

❷ Update by USB Drive

Step 1Save the downloaded firmware into USB drive

Note Make sure the partition format of USB drive is FAT16/32.

Step 2Insert USB drive into USB port at the front of duplicator, then select function 5.2.1 Update BIOS. Update would complete in one minute.

Caution Please do not disrupt during update, otherwise it would cause irretrievable error on duplicator.

28

7 PC-Monitoring The Work StatusReal-Time PC-Monitoring⌘How to Use Monitoring on LogPC-Monitoring brings convenience of PC-Monitoring and Log Report Export, so production management is easier, more efficient, and reducing labor cost.

⌘Preparation before StartingStep 1Install Synchronous Monitor Software LV07H , and its driver PL-2303 .

Step 2Make sure USB cable is connected between PC and duplicator.

Step 3After duplicator is booted up, open Synchronous Monitor Software LV07H.LV07H would show the information and status of the connected duplicator.

Step 4When the status shows ON LINE, the duplicator is connected successfully.Click the duplicator to start PC-monitoring.

Step 5If the status is not shown ON LINE, please check step 1~3 again.

29

PC-Monitoring The Work Status 7⌘Operation of PC-MonitoringNote Please use specific computer to do PC-Monitoring, and prevent PC operating other

tasks. The information of PC-Monitoring can be instant synchronized.

Step 1The status of duplicator shows ON LINE, then open monitoring screen. The program is ready to work when the status show STANDBY.

Step 2After placing source/target HDD on duplicator, instruct jobs for duplicator. The program shows all related information of HDDs. It is able to monitor detail information of every HDD through PC-Monitoring. E.g. HDD model, S/N, copy speed. (Note: copy speed varies all the time during operation). It is able to PC-Monitor all the function and work progress during operation.

Log Report⌘Browse Log Report through PCBesides PC-Monitoring, LV07H can browse Log Report of duplicator through PC

Step 1After finishing all the task of duplicator, press ESC on duplicator. The status shown on LV07H is STANDBY. Click Log Data on the top of window, then select Open Log Window.

30

7 PC-Monitoring The Work StatusStep 2After entering Open Log Window, select the date or period of time for log report generation.

Clear Log Report (function 7.4.1)After user entering password, the log report saved in duplicator can be wiped out. Please contact your merchandise for default password.

Note Please close PC-Monitoring program LV07H or disconnect PC from duplicator while clearing log report.

Step 3After selecting the date or period of time for log report generation, log report would shows. The HDD Duplicator is able to record up to 30,000 records of operation information of HDD. One operation on a single HDD is saved as one record. E.g., there are 21 records saved when duplicate from one HDD to 20 targets.

Note If there is no record saved at the selected period of time, or record had been wiped out, the program would show No match records!

Background information of this log report

Original Source Record: Manage and control the source , confirm the size of the data are consistent.Detailed task records: best reference for production and HR management.

Time of execution

Content was protected by Invisible-Ink Technology ! Please check it by LV07Z.exe

iSecuLog protection: guarantee the original data without any changes

HDD S/N

Yield analysis: the pass and failure rate for yield records.

31

PC-Monitoring The Work Status 7Note It can save up to 30,000 pcs of records. One instruction onto one HDD is recorded

as one piece of log record. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 piece of log.

⌘Export Log ReportThe USB port at the front of duplicator is able to firmware update, and also for Log Report exportation.

After finishing all the task of duplicator, enter function 7. Log Report Management then choose to export log report of day, recent log report, or select a period of time.

Export log report of todayExport Log Report of today via USB port to USB drive.

Export recent log reportTo output the log records in recent 1day to 28 days via USB port to USB drive

Export report from a period of timeTo output the log records of a period time via USB port to USB drive.

Note The Log Reports that exported from PC-Monitoring program or USB port are both .txt file. It does not require any special software for exportation, which is for the convenience of user acquiring report for analysis.

32

8 FAQSystem FAQ

Questions Solution

LCD shows "HDD Too Small"

1. The capacity of source HDD is bigger than target HDD. E.g., copy 500GB HDD to 250GB HDD

2. The capacity of source and target are the same, but internal capacity might be slightly different

What OS does duplicator support? Duplicator copies any kinds of OS

Can duplicator copy IDE HDD, SSD, mSATA, etc?

Yes, it can. As long as adaptor can adopt to SAS interface

How long does it take to duplicate?For example, duplicator supports 8.1GB/min copy speed. It takes around 2 min to copy Win8 OS(approx 12GB)

How big the capacity of HDD does duplicator support?

Duplicator supports up to 15TB HDD, and MBR/GBT format HDD

Can I interupt the copy task while it is not finished?

Yes, the program (copy, compare and erase) can be stopped while it is in processing by pressing ESC for aobut 3~4 seconds

Will it be safe if I remove the HDD right after copy process?

Yes, the device will automatically cut off power of each port to protect HDD during removal from the duplicator. The power of each port will be only be output when the operation is started.

What kind of format does duplicator support?

FAT16/32/64, NTFS, ext2/3/4(Linux), HFS/HFX/HFS+(Mac) are supported for Systems and Files Copy. If copy the format other than those above, it transfer to All Partition Copy.

33

FAQ 8PC-Monitoring FAQ

Questions Answer

Why duplicator can not

execute PC-Monitoring?

Make sure USB cable is connected betwenn

PC and duplicator. It is recommended to attach

USB cable, after that open LV07H.

Why the monitoring

information of LV07H

lags, and cannot catch up

duplicator?

PC-Monitoring consume most of process

resource of PC. If PC process ability is low; runs

other tasks at the same time, LV07H might lags.

It is recommended to run with better process

ability PC; not operating other program on PC.

34

9 SpecificationProduct Specification

Product Name ITS Professional SAS & SATA HDD/SSD Duplicator

Model ITS700-SAS, ITS1500-SAS

Target 1:7, 1:15

Buffer 512MB

HDD Interface 1.8"/2.5"/3.5" SATA HDD, SAS HDD, SSD

Optional, with adapter: 2.5"/3.5" IDE HDD

Operation Type Stand-alone operation; Real-time monitoring

Display Backlight Monochrome LCD

Control Button 4 Push Buttons ( ▲ , ▼ , OK, ESC)

LED StatusLED (Red/Green/Yellow) on each slot; Yellow(powering), Green(pass), Red(fail)

Duplication Modevs Support Format

System and Files (Quick Copy): Support formats of FAT16/32/64, NTFS, Linux (ext2/3/4), HFS/HFS+/HFX

Whole HDD, All Partitions, Percentage Copy: Support all formats

Capacity 15TB above

Power consumption 400W

Power Supply Adjustable voltage 115V~230V, 50/60Hz.

Temperature Range Working: 5ºC ~45ºC; Storage: -20ºC ~85ºC

Humidity Range Working: 20%~80%; Storage: 5%~95%

Safety FCC, CE, RoHS