its - 8012-24+

The Leader in High Performance Hardened Products

Innovation Growth ServiceITS - 8012-24+

ITS EXPRESS By Hardened Networks ITS-8012-24+ Product Overview

Copyright © 2020 ITS Express, Inc. All Rights Reserved. Designated trademarks and brands are the property of the their respective owners. All product specifications and data are subject to change without notice to improve reliability function, design, or otherwise. ITS Express Inc. disclaims any or all liability for any errors,

inaccuracies, or incompleteness contained in any data‐sheet, or in any other disclosure relating to any product.

Designed For Heavy Video Use in Unicast/Multi-Cast in Harsh EnvironmentsExceeds NEMA TS‐2 SpecificationsLayer 2++ Managed Hardened IGMP Video Switch4 USFP+ Ports 100Mb/1000Mb/2.5Gb/10Gb (Ultra SFP+ Ports)4 ESFP Ports 100Mb/1000Mb/2.5Gb (Enhanced SFP Ports)16 Copper Ports 10Mb/100Mb/1000Mb TXBypass switching time <10msEasy to Configure Web interface designed by ITS usersVeriPHY (Advanced Real Time Copper Cable testing)Optical Monitoring With Mapping CapabilitiesMultiple Switch Configurations: HTTP,HTTPS, Telnet, SSH, CLIEvent Notification: Email SMTP, Syslog, SNMP & Relay OutputDefault Profile Now Includes RSTP & IGMPv2 Snooping on VLANSFast ITS Ring Recovery Time < 10ms over 250 units of connectionsSFP/SFP+ Mix and match all speeds single or multi‐mode, dual strand (LX,EX,ZX) or single strand fiber (BX, BR, ZR) 100Mb/1000Mb/2.5Gb/10GbNotifications for Link Up, Link Down, SFP Temperature, Ring Topology Change Ring Environment, Etc.Supports 100Mb/1Gb/2.5Gb/10Gb optical bypass function of 2 port duplex or 4 port simplex fiber connectionFull Layer 2+ Management, 802.1x AuthenticationRemote monitoring (RMON)S‐Flow network usage monitoring

Where Innovation Meets Service

ITS Express switches have been specifically engineered to handle the challenging demands of extreme environmental conditions and 5k multi-cast high bandwidth video applications.

A vast array of redundancy protocols combined with dual redundant power capabilities ensure maximum uptime for mission critical applications.

Hardened Networks provides state of the art deisgned switches, which all feature next-generation ASICs, robust backplanes, and depenable firmware. This gives you the “best-of-breed” in environmentally challenging switch producs.

Features include: Network Security, Port-based Network Access Control (IEEE 802.1X) HTTPS Secure Web GUI, SSHv2 for Secure RemoteCommand Line Login, Rate Limiting, ACL Policies, QOS, TOS, COS, Adaptive Cut-Through Switching Q in Q Vlans State of the Art Firmware features, which have been designed around the ITS Market and heavy multi-cast environments.

Key Benefits

Next generation ITS-8012-24+

Exceeds NEMA TS-2 Specifications

176 GB Back- Plane

Hardened Advanced Layer 2+

10 Gb USFP+ (Ultra SFP+)

2.5 Gb ESFP (Enhanced SFP)

ITS-8012-24+ OverviewV3 Technology

Bypass fiber ports

V3 Technology

APL Approval #: 684-002-028

ITS EXPRESS By Hardened Networks ITS-8012-24+ Specifications

ITS-8012-24+

4

16

Switch Model

Copper TX 10Mb/100Mb/1000Mb Portsin RJ45 Auto MDI/MDIX

Ethernet Standards

Processing

ProtocolsPacket BufferJumbo Frame

Switch Properties

Security Features

IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.3z for 1000Base-XIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

Adaptive Cut-Through w/Fallback to Store-and-Forward

CSMA/CD32MbitsUp to 10k Bytes

Physical Ports

Technology

ESFP Port 100Mb/1G/2.5GB Base-X SFP port

4

MAC Table 32k

Priority Queues 8

Switching latency: 7 usSwitching bandwidth: 176GbpsThroughput (packet per second) : 179Mpps@64Bytes packetMax. Number of Available VLANs: 4096VLAN ID Range : VID 0 to 4095IGMP multicast groups: 64 for each VLANPort Loop ProtectionEnable/disable ports, MAC based port securityPort based network access control (802.1x)VLAN (802.1Q ) to segregate and secure network trafficRADIUS/TACACS+ centralized password managementSNMPv3 encrypted authentication and access securityHTTPS / SSH / SSL enhance network security

USFP+100Mb/1G/2.5GB/10GB Base-X10G SFP+ port

Copyright © 2020 ITS Express, Inc. All Rights Reserved. Designated trademarks and brands are the property of the their respective owners. All product specifications and data are subject to change without notice to improve reliability function, design, or otherwise. ITS Express Inc. disclaims any or all liability for any

errors, inaccuracies, or incompleteness contained in any data‐sheet, or in any other disclosure relating to any product.


Copyright © 2020 ITS Express, Inc. All Rights Reserved. Designated trademarks and brands are the property of the their respective owners. All product specifications and data are subject to change without notice to improve reliability function, design, or otherwise. ITS Express Inc. disclaims any or all liability for any

errors, inaccuracies, or incompleteness contained in any data‐sheet, or in any other disclosure relating to any product.

Redundant Ring (ITS-Ring) with recovery time less than 30msQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN taggingIP-based bandwidth managementApplication-based QoS managementPort configuration, status, statistics, monitoring, securityDHCP Server/Client/RelayNTP recurring Daylight Saving Time option

Software Features

Traffic Prioritization

TOS/Diffserv supportedCoSApplication based QoSIP based bandwidth managementPort rate limiting: User DefineStorm Control Port ClassificationPort Tag RemarkingPort DSCPPort PolicingQueue PolicingPort ShapingDSCP- based QOSWRED (Weighted Random Early Detection) for congestion avoidance

Multicast Features

IGMP v1, 2, 3 - RFCs 1112, 2236, 4604IPv6 Multicast Listener Discovery Protocol (MLDv2)IGMP Snooping Globally or per VLANConfigurable SSM Range designationSelectable Auto mode or IGMP/MLD version per VLANIGMP Snooping Port Group Filtering ProfilesIGMP/MLD Querier Election per VLAN

RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1

Network Redundancy

RS-232 Serial Console Port

ITS-RingExpress-ChainExpress-Ring (Express Ring now integrates with *Moxa, *Advantech & *Hirchmann ring protocols)STP/RSTP/MSTP (IEEE 802.1 d/w/s)

LED IndicatorsLED IndicatorsPower Indicator (PWR)Ring Master Indicator (R.M.)

Green : Power LED x 2Green : Indicates that the system is operating in Ring Master mode


Power

Redundant power input

Power Consumption (Typ.)Overload Current ProtectionReverse Polarity Protection

Physical CharacteristicEnclosure

Dimension (W x D x H)EnvironmentalStorage Temperature

Operating TemperatureOperating Humidity

Dual DC inputs 12~48VDC on 6-pin terminal block/8012-24+ 120Volt A.C input distributed to dual-redundant power supplies

31.7 Watts

PresentPresent

IP-30

300.0 (W) x 220.0 (D) x 88.0 (H)mm

5% to 95% Non‐condensing‐40 to 85 C (‐40 to 185 F)

‐40 to 85 C (‐40 to 185 F)



Fault ContactRelay Relay Output to carry capacity of 1A at 24VDCReset Button < 5 sec: System reboot, > 5 sec: Factory default

LED IndicatorsLED Indicators

Redundant-Ring Indicator (Ring)

Fault Indicator (Fault)

10/100/1000Base-T(X) RJ45 PortIndicator

1G/2.5GBase-X SFP Port Indicator1G/10Gbase-X SFP Port Indicator

Green : Indicates that the system operating in Redundant-Ring modeGreen Blinking : Indicates that the Ring is broken.Amber : Indicate unexpected event occurredGreen for port Link/Act (Upper)Dual color LED for speed: Green for 1000Mbps, Amber for 100Mbps, off-light for 10Mbps (Lower)Dual color LED: Green for 2.5G Link/Act, Amber for 1G Link/ActDual color LED: Green for 10G Link/Act, Amber for 1G Link/Act


The ITS Express 8012-24+ provides two sets of bypass fiber ports, giving the ESFP/USFP+ ports additional redundancy capabilities.

Connect a LC fiber cable from ESFP/USFP+ fiber port to a SFP labeled bypass port on the front panel and another LC fiber cable from the corresponding PANEL labeled bypass port to the patch panel.

When the switch loses power, transit traffic will travel through the bypass module and onto another active switch.

Note that the fiber ESFP port will still work if it is not connected to any bypass port; however, the fiber port will not have bypass ability if the device is down.

LC Connector: 4 Duplex Single-mode LC ConnectorOptical Fiber: Single Mode 9/125nmOperating Wavelength: 1260-1570nmSwitch Time: <10ms

Bypass Specification Bypass Physical Ports

Fiber Ethernet



ITS-8012-24+




Regulatory Approvals

EMC

EMI

EMS

ShockFree FallVibrationSafetyWarranty

EN55032, EN55024(CE EMC), FCC Part 15B, EN61000-3-2, EN61000-3-3CISPR 32, EN55032, FCC Part 15B class AEN 61000-4-2 (ESD)EN 61000-4-3 (RS)EN 61000-4-4 (EFT),EN 61000-4-5 (Surge),EN 61000-4-6 (CS),EN 61000-4-8 (PFMF),EN 61000-4-11 (DIP)

IEC 60068-2-27IEC 60068-2-31IEC 60068-2-6EN60950-1, UL 60950, EN 60950-15 Years

Other Solutions

ITS EXPRESS By Hardened Networks Other Solutions

Express Supply Inc. www.expresssupply.net (407) 497-8614 Copyright © 2020 ITS Express, Inc. All Rights Reserved. Designated trademarks and brands are the property of the their respective owners. All product specifications and data are subject to change without notice to improve reliability function, design, or otherwise. ITS Express Inc. disclaims any or all liability for any errors, inaccuracies, or

incompleteness contained in any data‐sheet, or in any other disclosure relating to any product.

We here at Hardened Networks are proud to carry products that are certified by:

Hardened Networks has created variety of high quality products to fit your needs. If you did not find what you needed in the ITS-8012-24+, please try the ITS 8012-24, or browse our other solutions.

Ethernet Switches Communications

ITS-3488

ITS- MC-100010Mb/100Mb/1000tMbps Ethernet BASE-T/TX to SFP (MM or SM)Optical port supports 100Mb or 1000Mb full duplex data

ITS- MC-10010Mb/100Mbps Ethernet BASE-T/TX to SFP (MM or SM)Flexible power 18-46VAC/12-60 VDC

ITS- VC-10010Mb/100Mbps Ethernet BASE-T/TX to a pair of copper cablesFlexible power 18-46VAC/12-60 VDC

High Speed VDSL-2 Technology

ITS-34164 Ultra Fiber Ports SFP+ 100Mb/1Gb/2.5Gb/10Gb16 Copper Ports 10Mb/100Mb/1000TX156 GBPS Back-PlaneHardened Base Layer 3

4 Ultra Fiber Ports SFP+ 100Mb/1Gb/2.5Gb/10Gb8 Enhanced Fiber Ports SFP Ports 100Mb/1Gb/2.5Gb 8 Copper Ports 10Mb/100Mb/1000TX156 GBPS Back-PlaneHardened Base Layer 3

ITS-8042+

2 Enhanced Fiber Ports SFP 100Mb/1000Mb/2.5Gb8 Copper Ports 10Mb/100Mb/1000MbTwo sets of bypass fiber ports96 GBPS Back-Plane

2 Ultra Fiber Ports SFP+ 100Mb/1000Mb/2.5Gb/10Gb

ITS-8042

8 Copper Ports 10Mb/100Mb/1000Mb

2 Ultra Fiber Ports SFP+ 100Mb/1000Mb/2.5Gb/10Gb

96 GBPS Back-Plane

2 Enhanced Fiber Ports SFP 100Mb/1000Mb/2.5Gb

its - 8012-24+

Documents