item # hoshizaki km-320m h projectcuber dimensions. w x d x h. km-320m_h 6/11 item # 13170. modular...
TRANSCRIPT
Hoshizaki
© HOSHIZAKI AMERICA, INC.
618 Hwy. 74 S., Peachtree City, GA 30269 TEL 1-800-438-6087 FAX 1-800-345-1325 www.hoshizaki.com
CUBER DIMENSIONSW x D x H
KM-320M_H6/11
Item # 13170
MODULAR CRESCENT CUBER
Warranty Valid in United States, Canada, Puerto Rico, & U.S. Territories. Contact factory for warranty in other countries.Three Year - Parts & Labor on entire machine.Five Year - Parts & Labor on: Evaporator.Five Year - Parts on: Compressor, air-cooled condenser coil.
KM-320M_HItem #
Project:
Qty:
Hoshizaki reserves the right to change specifications without notice.
KM-320M_H22 x 273/8 x 305/16
SLIM-LINE SERIES
*AutoCad available on KCL
• Up to 352 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• Individual crescent cube
• Protected by H-GUARD Plus Antimicrobial Agent
• CycleSaver® Design
• EverCheck® alert system
• Stainless steel evaporator
• Removable air filters (Air-cooled model only)
• R-404A Refrigerant* The KM-320MAH is ENERGY STAR qualified.
B-500B-300
ICEDISPENSER
HOSHIZAKI
DB-200
ICEICE
DB-130
®
Also available on Large Bins:
B-1150SS
B-1300SS
B-1500SS
B-1650SS
KM-320MAHAir-Cooled
Shown on an optionalB-300
KM-320MWHWater-Cooled
B-700
B-900
B-800
*
Hoshizaki KM-320MAH Item#:106
Bush Site Content Bush Refrigeration Page: 510
Electrical Supply
7/8" Dia. Opening
Hoshizaki DIMENSIONS
W x D x H
© HOSHIZAKI AMERICA, INC.
KM-320M_H MODULAR CRESCENT CUBER
UTILITY CONSUMPTION
AIR-COOLED
Model Number
70˚
50˚ 70˚
325
90˚
80˚
90˚
Ice ProductionPer Cycle
KWH per100 LBS.
90/70
Potable
Water Gal.per 100 lbs.
90/70Lbs. Cubes
KM-320MWH
Air
Tem
p˚
F.
Water Temp˚ F.
SPECIFICATIONS
Model Number Condenser AmperageMin. CircuitAmpacity
ShippingWeight
8.2 20 153 lbs.Water-CooledKM-320MWH
6.9 18.4
315
311
311
293
287
265
251
7.2 360
278
Condenser
Water Gal.per 100 lbs.
90/70
N/A
OPERAT ING L IM ITS• Ambient Temp Range 45 - 100˚F• Water Temp Range 45 - 90˚F• Water Pressure 10 - 113psig• Voltage Range 104 - 127V
ELECTRICAL & PLUMBING/KM-320M_H• 115V/60/1• 20 amp Max Fuse/HACR Breaker Size• 1/2” FPT Water Inlet• 3/4” FPT drain • 3/8” FPT condenser water outlet (Water-Cooled Only)• 1/2" FPT condenser water inlet (Water-Cooled Only)
SERVICE• Panels easily removed and all componentsaccessible for service.
• Removable/cleanable air filters(Air-Cooled model only)
618 Hwy. 74 S., Peachtree City, GA 30269 TEL 1-800-438-6087 FAX 1-800-345-1325 www.hoshizaki.com Printed in U.S.A.
KM-320M_H22 x 273/8 x 305/16
WATER-COOLED
70˚
50˚ 70˚
352
90˚
80˚
90˚Air
Tem
p˚
F.
Water Temp˚ F.
349
348
348
342
324
309
308337
KM-320MAH
5.2 16.87.2 360 157
9.7 20 153 lbs.Air-CooledKM-320MAH
FRONT VIEW
21 7/8"
(555mm)
22"
(560mm)
30
5/1
6"
(77
0m
m)
27 3/8"
(695mm)
1 3/16"
(30mm)
1/8"
(3mm)
Drain
3/4" FPT
Drain (Dew Water)
Stainless Pipe 3/8" O.D.
SIDE VIEW
21 1/16"
(535mm)
2"
(50mm)
Opening
4 1/8"
(105mm) 8 7
/16
"
(21
5m
m)
9 1
/16
"
(23
0m
m)
9 5
/8"
(24
5m
m)
ICE DROP ZONE
19 7/8"
(505mm)
11 3/8"
(289mm)
1 13/16"
(46mm)
5"
(126mm)3 1/8"
(80mm)
15 5/8"
(395mm)
3 1/8"
(80mm)
29
23
/32
"
(75
5m
m)
28
1/2
"
(71
8m
m)
1/2
"
(12
.6m
m)
1"
(25
mm
)
5/1
6"
(8m
m)
Water Inlet
1/2" FPT
Drain
3/4" FPT
AIR-COOLED UNIT
Electrical Supply
7/8" Dia. Opening
19 7/8"
(505mm)
11 3/8"
(289mm)
1 13/16"
(46mm)
5"
(126mm)3 1/8"
(80mm)
15 1/8"
(395mm)
3 1/8"
(80mm)
29
23
/32
"
(75
5m
m)
28
3/8
"
(71
8m
m)
1/2
"
(12
.6m
m)
1"
(25
mm
)
5/1
6"
(8m
m)
Water Inlet
1/2" FPT
Drain
3/4" FPT
WATER-COOLED UNIT
Mounting Hole Mounting Hole
22
19
/32
"
(57
4m
m)
3 3/8"
(80mm)
15 15/16"
(435mm)
Condenser Water Outlet
3/8" FPT
Condenser Water Inlet
1/2" FPT
Air Filter
(Air-Cooled Unit Only)
STORAGE BINS
Model Number Application Capacity ARI-Rated Capacity
B-500 500 lbs. 360 lbs.
B-700 700 lbs. 550 lbs.
B-300 300 lbs. 260 lbs.
• Air-cooled
• Water-cooled
B-900 900 lbs. 660 lbs.
B-1150 1150 lbs. N/A
B-800 800 lbs. 600 lbs.
B-1500 1490 lbs. N/A
B-1650 1605 lbs. N/A
B-1300 1275 lbs. N/A
Hoshizaki KM-320MAH Item#:106
Bush Site Content Bush Refrigeration Page: 511
The HDI-11 is a single housing water treatment system with a 10” drop-in cartridge that reduces sediment down to 0.5 micron and reduces chlorine, taste & odor at a flow rate of 1.5 gpm for 15,000 gallons. The system includes IsoNet®, patented scale inhibiting technology, which delivers consistent protection against the formation and accumulation of scale and provides a protective barrier to help guard against corrosion.
IsoNet® - Patented scale inhibiting technology helps protect equipment against scale and corrosion for the rated capacity of the system.
Reduces maintenance frequency and cost, and extends equipment life.
Gradient-density depth filtration reduces dirt, rust, and other debris as small as 1/2 micron to assure clean, clear water and protect solenoids, valves and other fittings against wear and plugging.
High capacity activated carbon filtration makes water taste great and protects equipment against corrosive chlorine.
Improves equipment operating efficiency.
Stainless steel mounting bracket and full-flow inlet shut-off valve makes installation simple.
Built-in pressure gauge allows visual monitoring of operating pressure.
Inlet shut-off and depressurization valves make changing the filter quick and simple.
Generates less waste, only the drop-in cartridge is replaced. No discarding of metal or plastic quick-change filters.
Replacement cartridge cost per gallon is much less than proprietary quick-change filters.
NSF Certified under Standard 42.
Feed-water connection to system should be COLD only.
Do not exceed system specifications for temperature and pressure.
Allow 3” clearance below system for filter housing removal and cartridge replacement.
Detailed installation, operation & maintenance manual is included with each system.
No activation procedure or flushing is required for system to perform as specified.
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
Model: HDI-11 Part #: 160-60105
Application
Snapshot
System Benefits
Installation Tips
- Cubers up to 800 lbs.
- Flakers up to 1,000 lbs.
HOSHIZAKIWATERFILTRATION
Hoshizaki HDI-11 Item#:106
Bush Site Content Bush Refrigeration Page: 512
Model Part Number Qty
CTO-10H 252-40210 1
Systems have a 3 year warranty against defects in material and workmanship.
Model HDI-11 is tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of:Standard 42: Aesthetic Effects, Chlorine ReductionTaste and Odor ReductionNominal Particulate Reduction, Class 1
System Dimensions(Height x Width X Depth, inches
14 1/2” x 6 9/16” x 5 1/8”
Connection - Inlet & Outlet 1/2” NPT female
Operating Pressure Range 10-125 psi (0.7 -8.6 bar)
Inlet Water Temperature Range 35o -100o F (2o -38o C)
Shipping Weight 6 lbs.
PerformanceChlorine, Taste and Odor Reduction Capacity
15,000 gals (56,700 liters)
Service Flow Rate 1.5 gpm (5.7 lpm)
Sediment Reduction .5 micron(nominal)
Scale & Corrosion Inhibitor IsoNet (70 grams)
Model: HDI-11 Part #: 160-60105
Specifications
Do not use on water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
It is recommended that filters be changed every six months, when capacity is reached or when effluent pressure or flow becomes inadequate.
This product is for commercial use only and must be installed and maintained according to manufacturers guidelines.
Replacement Cartridge(s)
Warranty
HDI11spec612
Dealer/Distributor Info:
Optonal Flush Valve Kit - Part #: 160-52910
Mfg. by OptiPure for Hoshizaki America, Inc.
HOSHIZAKIWATERFILTRATION
Application Guide
Model HDI-11
AM50
KM-61
KM-101
KM-151
KM-201
KM-260
KM-320
KM-515
KM-600
KM-650
KML-250
KML-351
KML-451
KML-631
KMD-410
KMD-450
KMS-830
KML700-M
All Cubelet models except F-2000-c
All Flaker models except F-2000
Hoshizaki HDI-11 Item#:106
Bush Site Content Bush Refrigeration Page: 513