iso/iec17025:2005 · accreditation standard iso/iec 17025: 2005 certificate number cc-2360 page 1...

QNational Accreditation Board forTesting and Calibration Laboratories(A Constituent Board of Quality Council of India)

QCINfVBL

CERTIFICATE OF ACCREDITATION

SP CALIBRATION LABS

has been assessed and accredited in accordance with the standard

ISO/IEC17025:2005

"General Requirements for the Competence of Testing k Calibration Laboratories"

for its facilities atPlot No. 34/Part, H. No. 2-1-328/2, 2nd Floor, Road No. 2,Sai Ram Nagar Colony, Nagole, Hyderabad, Telangana

in the field ofCALIBRATION

Certificate Number CC-2360

Valid Until 29/05/2020Issue Date 30/05/2018

This certificate remains valid for the Scope of Accreditation as specified in the annexure subject to

continued satisfactory compliance to the above standard & the relevant requirements of NABL.

(To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabl-india.org)

Signed for and on behalf of NABL

Hi

a Anil ReliaChief Executive Officer

Ht89076970200020000026

oNational Accreditation Board forTesting and Calibration Laboratories(A Constituent Board of Quality Council of India)

QCINfIBL

SCOPE OF ACCREDITATION

SP Calibration Labs, Plot No. 34/Part, H. No. 2-1-328/2, 2nd Floor,Road No. 2, Sai Ram Nagar Colony, Nagole, Hyderabad, Telangana

Laboratory

Accreditation Standard ISO/IEC 17025: 2005

Certificate Number CC-2360 Page 1 of 4

Last Amended onValidity 30.05.2018 to 29.05.2020

sr "Calibration MeasurementCapability (±)

Quantity Measured / Range/FrequencyInstrument

Remarks

MECHANICAL CALIBRATION

I. PRESSURE INDICATING DEVICES

1. Digital and DialPressure Gauges/PressureTransmitters/Controllers/Switch (PneumaticPressure) *

0.025 bar Using Digital PressureGauge By Comparisonmethod as perDKD-R-6-1

0 to 30 bar

Using Digital PressureGauge By Comparisonmethod as perDKD-R-6-1

2. Digital & Dial VacuumGauges &Transmitters/ Switch(Vacuum) *

(-) 0.85 bar to 0 bar 0.006 bar

3. Digital & DialPressure Gauges/PressureTransmitters/Controllers/Switch (HydraulicPressure) *

0 to 700 bar 0.38 bar Using Digital PressureGauge By ComparisonMethod as perDKD R-6-1

DifferentialPressure Gauge,Magnehelic Gauge,Differential PressureSwitch &Transmitter*

0 to 100 mbar 0.028 mbar Using Digital PressureGauge By ComparisonMethod as perDKD R-6-1

4.

IAX4V>JAvijit Das

Program ManagerDheeraj Chawla

Convenor

oNational Accreditation Board forTesting and Calibration Laboratories(A Constituent Board of Quality Council of India)

QCINfIBL



Laboratory




Quantity Measured / Range/FrequencyInstrument

‘Calibration MeasurementCapability (±)

Remarks

II. ACCELERATION & SPEED

Non-Contact TypeDigital Tachometer,Centrifuges / RPMTest Rigs / Stirrers /Blower RPM/ MotorRPM/ RPMIndicators #

1. 12 RPM to 500 RPM 0.161 RPM to 1.31 RPM Using DigitalTachometer Calibratorby Direct Method as perSANAS TR-45

>500 RPM to95000 RPM

1.73 RPM to3.54 RPM

Using DigitalTachometer byComparison Methodas per SANAS TR-45

III. ACOUSTICS

Acoustic Pressure151. @ 1 kHz94 dB@ 1 kHz114 dB

Using Sound LevelCalibrator By DirectMethod

0.732 dB

Avijit DasPrnnram Uananpr

Dheeraj ChawlaTnnuonnr

I* o’

National Accreditation Board forTesting and Calibration Laboratories(A Constituent Board of Quality Council of India)

•'TRW*

QCINfIBLSCOPE OF ACCREDITATION


Laboratory




Quantity Measured / ] Range/FrequencyInstrument P

SI. Calibration Measurementapability (±)

Remarks

THERMAL CALIBRATION

I. TEMPERATURE

1. Glass Thermometers,RTD/Thermocouplewith and withoutIndicator, Controller,Transmitter withSensor TemperatureGauges, Multi-Channel Datalogger*

(-) 80 °C to 50 °C 0.25 °C Using DigitalThermometer withSensor & Liquid BathDry Baths ByComparison Method

(-) 35 °C to 100 °C 0.81 °C

50 °C to 600 °C 0.83 °C

2. TemperatureIndicator of Bath,Freezers, Chambers,Ovens, Water Bath,Incubators,Lyophilizer, DHS,Auto Clave, Tunnel(Single Point)*

(-) 80 °C to 50 °C 0.25 °C Using DigitalThermometer withSensor By DirectMethod

(-) 35 °C to 100 °C 0.81 °C

50 °C to 600 °C 0.83 °C

Freezers, Chambers,Ovens, Incubators,BOD Incubators,Tunnel, DHS, andWater Bath, AutoClaves, Lyophilizer*

(-) 95 °C to 250 °C 1.2 °C3. Using TemperatureMultichannel DataLogger with RTD SensorBy Direct Method andas per IEC 600068-3-11

SPECIFIC HEAT & HUMIDITY

0.44 °C Using Temperature &RH Indicator with Sensor& Humidity ChamberBy Comparison method

1. Relative Humidity(RH) Indicator,Transmitter &Hygrometer T & RHData Loggers*

5 °C to 50 °C@ 50 % rh

10 % to 90 %@25 °C

0.93 % rh

Uyy'/v*>$)LAvijit DasDheeraj Chawla

Cnnuonnr Prnnram Mananpr

oNational Accreditation Board for“/ Testing and Calibration Laboratories

(A Constituent Board of Quality Council of India)QCINfIBL



Laboratory



Last Amended on30.05.2018 to 29.05.2020ValidityS

SI. Quantity Measured /Instrument

Range/Frequency Calibration Measurement; Remarksapability (±)

Using Temperature/I Humidity Data Loggers

By Direct Method andas per I EC 600068-3-11

* Measurement Capability is expressed as an uncertainty (±) at a confidence probability of 95%*Only in Permanent Laboratory*Only for Site Calibration*The laboratory is also capable for site calibration however, the uncertainty at site depends on the

prevailing actual environmental conditions and master equipment used.

5 °C to 50 °C 0.92 °C2. Humidity Chamber/EnvironmentalChamber, Rooms* 1.9 %rh20 % to 87 %

4"ÿAvijit Das

Proaram ManaaerDheeraj Chawla

rnnvonnr

iso/iec17025:2005 · accreditation standard iso/iec 17025: 2005 certificate number cc-2360 page 1...

Documents