iso update · pdf fileiso update, supplement to iso focus -- march 2016 1. international...
TRANSCRIPT
ISO Update Supplement to ISOfocus
March 2016
ISO Update, Supplement to ISO Focus -- March 2016 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 February to 29 February 2016
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 245 Cross-border trade of second-hand goods
ISO/CD 20245 Cross-border trade of second-hand goods
TC 4 Rolling bearings
ISO/CD 19843 Rolling bearings - Ceramic bearings balls - De-termination of the strength - Notched ball test
TC 29 Small tools
ISO/CD 20928 Tools for pressing — Spring plungers with heli-cal compression steel spring or nitrogen gas spring
ISO/CD 20929 Tools for pressing — Heel guidings in large stamping and forming dies
TC 34 Food products
ISO/CD 16140-4
Microbiology of the food chain — Method vali-dation — Part 4: Protocol for single-laboratory (in-house) method validation
ISO/CD 16140-6
Microbiology of the food chain — Method vali-dation — Part 6: Protocol for the validation of alternative (proprietary) methods for microbio-logical confirmation and typing
TC 35 Paints and varnishes
ISO/CD 16053 Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
ISO/DTR 19402
Paints and varnishes — Adhesion of coatings
TC 42 Photography
ISO/DTS 19567-2
Photography — Digital cameras — Part 2: Texture analysis on non cyclic pattern
TC 43 Acoustics
ISO/CD 11819-3
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Refer-ence tyres
TC 61 Plastics
ISO/CD 18485 Peel test for the determination of interlami-nar fracture toughness of flexible packaging laminates
ISO/CD 2555 Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method
ISO/CD 20819 Product specification for wood plastic recycled composites
ISO/CD 20368 Plastics — Epoxy resins — Determination of degree of crosslinking for crosslinking epoxy resins by Fourier transform infrared spectroscopy
TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries
ISO 13680:2010/CD Amd 1
Petroleum and natural gas industries — Corro-sion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions — Amendment 1
ISO/CD 35102 Petroleum and natural gas industries — Arctic Operations — Escape, evacuation and rescue from offshore installations
TC 69 Applications of statistical methods
ISO/DTR 11462-3
Guidelines for implementation of statistical process control (SPC) — Part 3: SPC on test examples for software validation
TC 84 Devices for administration of medicinal products and catheters
ISO/CD 7886-3 Sterile hypodermic syringes for single use — Part 3: Auto-disable syringes for fixed-dose immunization
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/DTS 11665-12
Measurement of radioactivity in the environ-ment — Air : radon 222 — Part 12: Determina-tion of the diffusion coefficient in waterproof materials: membrane one-side activity concen-tration measurement method
ISO/DTS 11665-13
Measurement of radioactivity in the environ-ment — Air: radon 222 — Part 13: Determina-tion of the diffusion coefficient in waterproof materials: membrane two-side activity con-centration measurement method
TC 96 Cranes
ISO/CD 9927-5 Cranes — Inspections — Part 5: Bridge and gantry cranes
TC 106 Dentistry
ISO/DTR 28642
Dentistry — Guidance on colour measurement
ISO/CD 20570 Dentistry — Oral surgical scalpel handle
TC 121 Anaesthetic and respiratory equipment
ISO/CD 80601-2-79
Medical electrical equipment — Part 2-79: Particular requirements for basic safety and essential performance of home healthcare environment ventilatory support equipment for respiratory impairment
ISO/CD 80601-2-80
Medical electrical equipment — Part 2-80: Particular requirements for basic safety and essential performance of home healthcare environment ventilatory support equipment for respiratory insufficiency
TC 122 Packaging
2 ISO Update, Supplement to ISO Focus -- March 2016
ISO/CD 19809 Packaging-Accessible design-Information and marking
TC 126 Tobacco and tobacco products
ISO/CD 22634-2
Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke — Method using gas chromatography/mass spectrom-etry — Part 2: Method using cyclohexane as extraction solvent
TC 130 Graphic technology
ISO/CD 2846-1 Graphic technology — Colour and transpar-ency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 21138-2
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fit-tings with smooth external surface, Type A
ISO/CD 21138-3
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fit-tings with non-smooth external surface, Type B
ISO/CD 7510 Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents using the gravi-metric method
TC 146 Air quality
ISO/DTS 20593
Ambient air — Determination of the mass concentration of tire and road wear particles (TRWP) — Pyrolysis-GC/MS method
TC 154 Processes, data elements and docu-ments in commerce, industry and administration
ISO/CD 8601-1 Data elements and interchange formats — Information interchange — Representation of dates and times — Part 1: Basic rules
ISO/CD 8601-2 Data elements and interchange formats — Information interchange — Representation of dates and times — Part 2: Extensions
TC 165 Timber structures
ISO/CD 12122-5
Timber structures — Determination of charac-teristic values — Part 5: Connections
TC 171 Document management applications
ISO/CD 11506 Document management applications — Ar-chiving of electronic data — Computer output microform (COM) / Computer output laser disc (COLD)
TC 172 Optics and photonics
ISO/CD 17123-9
Optics and optical instruments — Field proce-dures for testing geodetic and surveying instru-ments — Part 9: Terrestrial laser scanners
ISO/DTR 18476
Ophthalmic optics and instruments — Free form technology — Spectacle lenses and measurement
TC 188 Small craft
ISO/CD 16147 Small craft — Inboard diesel engines — En-gine-mounted fuel and electrical components
TC 190 Soil quality
ISO/CD 15175 Soil quality — Characterization of soil related to groundwater protection
TC 198 Sterilization of health care products
ISO/CD TS 11139
Sterilization of health care products — Vocabulary
TC 215 Health informatics
ISO/CD 13606-1
Health informatics — Electronic health record communication — Part 1: Reference model
ISO/CD 13606-2
Health informatics — Electronic health record communication — Part 2: Archetype inter-change specification
TC 217 Cosmetics
ISO/DTR 18811
Cosmetics — Guidelines on the stability testing of cosmetics products
TC 220 Cryogenic vessels
ISO/CD 21010 Cryogenic vessels — Gas/materials compatibility
TC 238 Solid biofuels
ISO/CD 20023 Solid biofuels — Safety of solid biofuel pellets — Safe handling and storage of wood pellets in residential and other small-scale applications
TC 249 Traditional chinese medicine
ISO/CD 20498-2
Traditional Chinese medicine — Computerised tongue image analysis system — Part 2: Light environment
TC 268 Sustainable development in communities
ISO/CD 37154 Smart community infrastructures — Best prac-tice guidelines for transportation
TC 299 Robots and robotic devices
ISO/CD TR 21382
Robots and robotic devices — Safety-related test methods for ISO 13482
JTC 1 Information technology
ISO/IEC CD 27050-2
Information technology — Security techniques — Electronic discovery — Part 2: Guidance for governance and management of electronic discovery
ISO/IEC 23000-13/PDAM 1
Information technology - Multimedia applica-tion format (MPEG-A) — Part 13: Augmented reality application format — Amendment 1
ISO/IEC CD 9075-15
Information technology — Database languages — SQL — Part 15: Multi dimensional arrays
ISO/IEC PDTR 19075-5
Information technology — Database languages — SQL Technical Reports — Part 5: Row Pat-tern Recognition in SQL
ISO/IEC PDTR 19075-6
Information technology — Database languages — SQL Technical Reports — Part 6: SQL sup-port for JSON
ISO/IEC CD 20382
Information technology — User interfaces — Face-to-Face Speech Translation
ISO/IEC CD 30113-5
Information technology — User interface — Gesture-based interfaces across devices and methods — Part 5: Gesture Interface Markup Language(GIML)
ISO/IEC CD 19784-1
Information technology — Biometric applica-tion programming interface — Part 1: BioAPI specification
ISO/IEC CD 24779-5
Information technology — Cross-jurisdictional and societal aspects of implementation of bio-metric technologies — Pictograms, icons and symbols for use with biometric systems — Part 5: Face applications
ISO/IEC PDTR 38505-2
Information Technology — Governance of IT — Part 2: Implications of 38505-1 for data management
ISO Update, Supplement to ISO Focus -- March 2016 3
DIS circulated
Period from 01 February to 29 February 2016
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 283 Occupational health and safety management systems
ISO/DIS 45001 * Occupational health and safety management systems — Re-quirements with guidance for use
2016-05-13
TC 8 Ships and marine technology
ISO/DIS 20519 * Ships and marine technology — Specification for bunkering of gas fuelled ships
2016-05-05
ISO/DIS 18139 * Ships and marine technology — Globe valves for use in low tem-perature applications — Design and testing requirements
2016-05-11
ISO/DIS 18154 * Ships and marine technology — Pilot operated safety valves for low temperature applications — Design requirements
2016-05-19
TC 20 Aircraft and space vehicles
ISO/DIS 21323 * Space data and information transfer systems — CCSDS Bundle protocol specification
2016-05-19
ISO/DIS 21324 * Space data and information transfer systems — Space data link security protocol
2016-05-19
ISO/DIS 19826 * Space systems — Programme management --Management of product characteristics
2016-05-12
TC 22 Road vehicles
ISO/DIS 13400-3
* Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3
2016-05-18
(Revision of ISO 13400-3:2011)
TC 23 Tractors and machinery for agriculture and forestry
ISO 5395-2:2013/DAmd 2
* Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers — Amendment 2: Cutting means enclosure guards
2016-05-12
ISO/DIS 6531 * Machinery for forestry — Port-able chainsaws — Vocabulary
2016-05-04
(Revision of ISO 6531:2008)
ISO/DIS 7112 * Machinery for forestry — Port-able brushcutters and grass-trimmers — Vocabulary
(Revision of ISO 7112:2008)
TC 24 Particle characterization including sieving
ISO/DIS 19430.2
* Particle size analysis — Particle tracking analysis (PTA) method
2016-04-11
TC 25 Cast irons and pig irons
ISO/DIS 16112 * Compacted (vermicular) graphite cast irons — Classification
2016-05-09
(Revision of ISO 16112:2006)
TC 28 Petroleum products and re-lated products of synthetic or biological origin
ISO/DIS 2592 * Petroleum and related products — Determination of flash and fire points — Cleveland open cup method
2016-05-19
(Revision of ISO 2592:2000)
TC 29 Small tools
ISO/DIS 1711-1
* Assembly tools for screws and nuts — Technical specifica-tions — Part 1: Hand-operated wrenches and sockets
2016-05-23
(Revision of ISO 1711-1:2015)
ISO/DIS 1711-2
* Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact)
2016-05-23
(Revision of ISO 1711-2:2015)
TC 34 Food products
ISO 2256:1984/DAmd 1
* Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) — Specification — Amendment 1
2016-05-10
ISO 6571:2008/DAmd 1
* Spices, condiments and herbs — Determination of volatile oil content (hydrodistillation method) — Amendment 1
2016-05-12
ISO/DIS 19563 * Determination of theanine in tea and instant tea in solid form using high-performance liquid chromatography
2016-05-09
TC 39 Machine tools
ISO/DIS 14955-1
* Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
2016-05-26
(Revision of ISO 14955-1:2014)
ISO/DIS 19085-4.2
* Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines
2016-05-12
ISO/DIS 19085-7
* Woodworking machines — Safety — Part 7: Surface plan-ing, thickness planing, combined surface/thickness planing machines
2016-05-12
4 ISO Update, Supplement to ISO Focus -- March 2016
ISO/DIS 19085-9
* Woodworking machines — Safety — Part 9: Circular saw benches (with and without slid-ing table)
2016-05-26
TC 41 Pulleys and belts (including veebelts)
ISO/DIS 15236-2
* Steel cord conveyor belts — Part 2: Preferred belt types
2016-05-19
(Revision of ISO 15236-2:2004)
TC 43 Acoustics
ISO/DIS 18405.2
Underwater acoustics — Terminology
2016-04-16
TC 44 Welding and allied processes
ISO/DIS 20378 * Welding consumables — Rods for gas welding of non al-loy and creep-resisting steels — Classification
2016-05-24
ISO/DIS 23279 * Non-destructive testing of welds — Ultrasonic testing — Charac-terization of indications in welds
2016-05-12
(Revision of ISO 23279:2010)
TC 45 Rubber and rubber products
ISO/DIS 1431-3
* Rubber, vulcanized or thermo-plastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for de-termining the ozone concentra-tion in laboratory test chambers
2016-05-18
(Revision of ISO 1431-3:2000)
ISO/DIS 1827 * Rubber, vulcanized or ther-moplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
2016-05-18
(Revision of ISO 1827:2011)
ISO/DIS 4662 * Rubber, vulcanized or ther-moplastic — Determination of rebound resilience
2016-05-06
(Revision of ISO 4662:2009, ISO 4662:2009/Cor 1:2010)
ISO/DIS 4666-3
* Rubber, vulcanized — Determi-nation of temperature rise and resistance to fatigue in flexom-eter testing — Part 3: Compres-sion flexometer (constant-strain type)
2016-05-10
(Revision of ISO 4666-3:2010)
ISO/DIS 23529 * Rubber — General procedures for preparing and condition-ing test pieces for physical test methods
2016-05-11
(Revision of ISO 23529:2010)
TC 46 Information and documentation
ISO/DIS 2108 * Information and documentation — International Standard Book Number (ISBN)
2016-05-12
(Revision of ISO 2108:2005)
TC 58 Gas cylinders
ISO/DIS 17879 * Gas cylinders — Self-closing cyl-inder valves — Specification and type testing
2016-05-19
TC 59 Buildings and civil engi-neering works
ISO/DIS 21930 * Sustainability in buildings and civil engineering works — Core rules for environmental declara-tion of construction products and services used in any type of construction works
2016-05-11
(Revision of ISO 21930:2007)
TC 61 Plastics
ISO/DIS 4589-1
* Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
2016-05-19
(Revision of ISO 4589-1:1996)
ISO/DIS 4589-2
* Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-tem-perature test
2016-05-19
(Revision of ISO 4589-2:1996, ISO 4589-2:1996/Amd 1:2005)
ISO/DIS 4589-3
* Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-tem-perature test
2016-05-19
(Revision of ISO 4589-3:1996)
ISO/DIS 294-1 * Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General prin-ciples, and moulding of multipur-pose and bar test specimens
2016-05-05
(Revision of ISO 294-1:1996, ISO 294-1:1996/Amd 1:2001, ISO 294-1:1996/Amd 2:2005)
ISO/DIS 15023-1
* Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Des-ignation system and basis for specifications
2016-05-12
(Revision of ISO 15023-1:2001)
TC 69 Applications of statistical methods
ISO/DIS 16355-2
* Application of statistical and related methods to new technol-ogy and product development process — Part 2: Acquistion of Voice of Customer and Voice of Stakeholder — Non-quantitative approaches
2016-05-22
ISO/DIS 16355-4
* Application of statistical and related methods to new technol-ogy and product development process — Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
2016-05-22
ISO/DIS 16355-5
* Application of statistical and related methods to new technol-ogy and product development process — Part 5: Solution strategy
2016-05-22
TC 83 Sports and other rec-reational facilities and equipment
ISO/DIS 10256-5
* Protective equipment for use in ice hockey — Part 5: Neck lac-eration protectors for ice hockey players
ISO Update, Supplement to ISO Focus -- March 2016 5
TC 84 Devices for administration of medicinal products and catheters
ISO 10555-1:2013/DAmd 1
* Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1
2016-05-19
ISO/DIS 11608-4
* Needle-based injection systems for medical use - Requirements and test methods — Part 4: Needle-based injection systems containing electronics
2016-05-12
(Revision of ISO 11608-4:2006)
TC 92 Fire safety
ISO/DIS 19021 * Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
2016-05-06
ISO/DIS 26367-2
* Guidelines for assessing the adverse environmental impact of fire effluents — Part 2: Meth-odology for compiling data on environmentally significant emis-sions from fires
2016-05-18
TC 96 Cranes
ISO/DIS 4309 * Cranes — Wire ropes — Care and maintenance, inspection and discard
2016-05-26
(Revision of ISO 4309:2010)
TC 102 Iron ore and direct reduced iron
ISO/DIS 3082 * Iron ores — Sampling and sam-ple preparation procedures
2016-05-04
(Revision of ISO 3082:2009, ISO 3082:2009/Cor 1:2009)
TC 106 Dentistry
ISO/DIS 9873 * Dentistry — Intra-oral mirrors
2016-05-05
(Revision of ISO 9873:1998, ISO 9873:1998/Cor 1:2000)
ISO/DIS 19715 * Dentistry — Filling instruments with contra set
2016-05-11
TC 110 Industrial trucks
ISO/DIS 22879 * Castors and wheels — Require-ments for castors for furniture
2016-05-13
ISO/DIS 22880 * Castors and wheels — Castors for furniture — Requirements for castors for swivel chairs
2016-05-19
ISO/DIS 22882 * Castors and wheels — Require-ments for castors for hospital beds
2016-05-13
TC 121 Anaesthetic and respiratory equipment
ISO 19054:2005/DAmd 1
* Rail systems for supporting medical equipment — Amend-ment 1
2016-05-12
TC 123 Plain bearings
ISO/DIS 6280 * Plain bearings — Requirements on backings for thick-walled multilayer bearings
2016-05-09
(Revision of ISO 6280:1981)
ISO/DIS 6282 * Plain bearings — Metallic thin-walled half bearings — Determi-nation of the sigma 0,01*-limit
2016-05-16
(Revision of ISO 6282:1983)
ISO/DIS 6525 * Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerances
2016-05-16
(Revision of ISO 6525:1983)
ISO/DIS 6526 * Plain bearings — Pressed bimetallic half thrust washers — Features and tolerances
2016-05-16
(Revision of ISO 6526:1983)
ISO/DIS 3548-2
* Plain bearings — Thin-walled half bearings with or without flange — Part 2: Measurement of wall thickness and flange thickness
2016-05-18
(Revision of ISO 3548-2:2009)
ISO/DIS 12132 * Plain bearings — Quality assur-ance of thin- walled half bearings — Design FMEA
2016-05-18
(Revision of ISO 12132:1999)
ISO/DIS 12302 * Plain bearings — Quality char-acteristics — Statistical process control (SPC)
2016-05-18
(Revision of ISO 12302:1993)
ISO/DIS 12308 * Plain bearings — Quality assur-ance — Sample types — Defini-tions, applications and testing
2016-05-18
(Revision of ISO 12308:1994)
ISO/DIS 13778 * Plain bearings — Quality as-surance of thin-walled half bearings — Selective assembly of bearings to achieve a narrow clearance range
2016-05-18
(Revision of ISO 13778:1999)
ISO/DIS 20054 * Plain bearings — Bearings con-taining dispersed solid lubricants
2016-05-11
TC 126 Tobacco and tobacco products
ISO 15152:2003/DAmd 2
* Tobacco — Determination of the content of total alkaloids as nico-tine — Continuous-flow analysis method — Amendment 2
2016-05-09
TC 127 Earth-moving machinery
ISO/DIS 13766-1
* Earth-moving- and Build-ing construction machinery — Electromagneticcompatibility of machines with internal electrical power sup-ply — Part 1: General EMC requirements under typical EMC environmental conditions
2016-05-05
(Revision of ISO 13766:2006)
ISO/DIS 13766-2
* Earth-moving machinery — Elec-tromagnetic compatibility — Part 2: EMC requirements under the aspect of functional safety
2016-05-05
(Revision of ISO 13766:2006)
6 ISO Update, Supplement to ISO Focus -- March 2016
TC 130 Graphic technology
ISO/DIS 16762 * Graphic technology — Post press --General Requirements for transfer, handling and storage
2016-05-18
ISO/DIS 19594 * Graphic technology — Test methods for the determination of the binding strength for perfect bound products — Page pull test working upwards
2016-05-24
TC 131 Fluid power systems
ISO/DIS 6605 * Hydraulic fluid power — Test methods for hoses and hose assemblies
2016-05-04
(Revision of ISO 6605:2002)
TC 134 Fertilizers and soil conditioners
ISO/DIS 19670 * Fertilizers and soil condition-ers — Solid urea aldehyde slow release fertilizer — General requirements
2016-05-05
TC 150 Implants for surgery
ISO/DIS 19227 * Cleaning of orthopedic implants - General Requirements
2016-05-19
ISO 7206-2:2011/DAmd 1
* Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials — Amend-ment 1
2016-05-04
ISO 7207-2:2011/DAmd 1
* Implants for surgery — Com-ponents for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 1
2016-05-04
ISO/DIS 11491.2
Implants for surgery — Test method for impact resistance of ceramic femoral heads for hip joint prostheses
2016-04-15
TC 153 Valves
ISO/DIS 19240 * Industrial valves - Lined metal quarter turn and check valves for chemical process and related industries
2016-05-10
TC 155 Nickel and nickel alloys
ISO/DIS 6372 * Nickel and nickel alloys — Terms and definitions
2016-05-09
(Revision of ISO 6372-1:1989, ISO 6372-2:1989, ISO 6372-3:1989)
TC 159 Ergonomics
ISO/DIS 9241-220
* Ergonomics of human-computer interaction — Part 220: Process-es for enabling, executing and assessing human-centred design within organizations
2016-05-19
TC 171 Document management applications
ISO/DIS 32000-2.3
Document management — Port-able document format — Part 2: PDF 2.0
2016-04-12
TC 184 Automation systems and integration
ISO/DIS 20140-5
Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing systems that influence the environment — Part 5: Environmental influence evaluation data
2016-05-04
TC 194 Biological and clinical eval-uation of medical devices
ISO/DIS 10993-16
* Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables
2016-05-19
(Revision of ISO 10993-16:2010)
TC 201 Surface chemical analysis
ISO/DIS 16962 * Surface chemical analysis — Analysis of zinc- and/or alumin-ium-based metallic coatings by glow-discharge optical-emission spectrometry
2016-05-17
(Revision of ISO 16962:2005)
TC 204 Intelligent transport systems
ISO/DIS 13111-1
* Intelligent transport systems (ITS) — The use of personal ITS station to support ITS service provision for travelers — Part 1: General information and use cases definitions
2016-05-04
ISO/DIS 13140-2
* Electronic fee collection — Eval-uation of on-board and roadside equipment for conformity to EN ISO 13141 — Part 2: Abstract test suite
2016-05-12
(Revision of ISO/TS 13140-2:2012)
ISO/DIS 13143-2
* Electronic fee collection — Eval-uation of on-board and roadside equipment for conformity to EN ISO/TS 12813 — Part 2: Abstract test suite
2016-05-12
(Revision of ISO/TS 13143-2:2011)
TC 206 Fine ceramics
ISO/DIS 19603 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for determin-ing elastic modulus and strength of thick ceramic coating
2016-05-12
ISO/DIS 20343 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus of thick ceramic coating at elevated temperature
2016-05-12
TC 207 Environmental management
ISO/DIS 14055-1
Environmental management — Guidelines for establishing good practices for combatting land degradation and desertifica-tion — Part 1: Good practices framework
2016-05-18
TC 209 Cleanrooms and associat-ed controlled environments
ISO/DIS 14644-13
* Cleanrooms and associated con-trolled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications
2016-05-12
ISO Update, Supplement to ISO Focus -- March 2016 7
TC 215 Health informatics
ISO/DIS 21298.2
* Health informatics — Functional and structural roles
2016-04-05
(Revision of ISO/TS 21298:2008)
ISO/DIS 21549-7.2
* Health informatics — Patient healthcard data — Part 7: Medi-cation data
2016-04-19
(Revision of ISO 21549-7:2007)
TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and perfor-mance indicators
ISO/DIS 24516-3
* Guidelines for management of assets of water supply and wastewater systems — Part 3: Wastewater collection networks
2016-05-25
TC 228 Tourism and related services
ISO/DIS 11121 * Recreational diving services — Requirements for introductory programmes to scuba diving
2016-05-19
(Revision of ISO 11121:2009)
ISO/DIS 13687-2
* Tourism and related services — Yacht harbours — Part 2: Mini-mum requirements for intermedi-ate service level harbours
2016-05-18
ISO/DIS 13687-3
* Tourism and related services — Yacht harbours — Part 3: Minimum requirements for high service level harbours
2016-05-18
ISO/DIS 24803 * Recreational diving services — Requirements for recreational diving providers
2016-05-19
(Revision of ISO 24803:2007)
TC 249 Traditional chinese medicine
ISO/DIS 18668-2
* Traditional Chinese medicine — Coding System of Chinese Medicines — Part 2: Codes of Decoction Pieces
2016-05-18
ISO/DIS 18668-3
* Traditional Chinese medicine — Coding System of Chinese Medicines — Part 3: Codes of Chinese Materia Medica
2016-05-19
ISO/DIS 18668-4
* Traditional Chinese medicine — Coding System of Chinese Medi-cines — Part 4: Codes of granule forms of individual medicinals for prescriptions
2016-05-19
JTC 1 Information technology
ISO/IEC/IEEE DIS 24748-5
* Systems and software engineer-ing — Life cycle management — Part 5: Software development planning
2016-05-19
ISO/IEC 14443-4:2008/DAmd 6
* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 4: Trans-mission protocol — Amendment 6: S(PARAMETERS) clarification
2016-05-10
ISO/IEC DIS 20009-4
* Information technology — Secu-rity techniques — Anonymous entity authentication — Part 4: Mechanisms based on weak secrets
2016-05-26
ISO/IEC DIS 27003
* Information technology — Se-curity techniques — Information security management system — Guidance
2016-05-12
(Revision of ISO/IEC 27003:2010)
ISO/IEC DIS 27004
* Information technology — Se-curity techniques — Information security management — Moni-toring, measurement, analysis and evaluation
2016-05-06
(Revision of ISO/IEC 27004:2009)
ISO/IEC 14496-10:2014/DAmd 3
* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 3: Additional Supplemental Enhancement Information
2016-05-09
ISO/IEC DIS 14496-33
* Information technology — Cod-ing of audio-visual objects — Part 33: Internet Video Coding
2016-05-18
ISO/IEC DIS 23000-18
* Information Technologies — Multimedia Application Formats (MPEG-A) — Part 18: Media Linking Application Format
2016-05-13
ISO/IEC 23001-10:2015/DAmd 1
* Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata metrics of media in ISO base media file format — Amendment 1: Carriage of ROI coordinates
2016-05-18
ISO/IEC 23003-2:2010/DAmd 4
* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 4: SAOC Conformance
ISO/IEC DIS 24779-4
* Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pic-tograms, Icons and Symbols for use with Biometric Systems — Part 4: Fingerprint Applications
ISO/IEC DIS 20000-6
* Information Technology — Ser-vice Management — Part 6: Re-quirements for bodies providing audit and certification of service management systems
2016-05-18
FDIS circulated
Period from 01 February to 29 February 2016
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 2 Fasteners
8 ISO Update, Supplement to ISO Focus -- March 2016
ISO/FDIS 4759-3
* Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F
2016-04-19
(Revision of ISO 4759-3:2000)
TC 6 Paper, board and pulps
ISO/FDIS 8254-2
* Paper and board — Measure-ment of specular gloss — Part 2: 75 degree gloss with a parallel beam, DIN method
2016-04-19
(Revision of ISO 8254-2:2003)
TC 21 Equipment for fire protec-tion and fire fighting
ISO/FDIS 7076-6
* Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems
2016-04-20
TC 22 Road vehicles
ISO 2575:2010/FDAmd 5
* Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 5
2016-04-09
TC 29 Small tools
ISO/FDIS 1641-1
* End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
2016-04-21
(Revision of ISO 1641-1:2003)
ISO/FDIS 3293 * Morse taper shank countersinks for angles 60 degrees, 90 de-grees and 120 degrees inclusive
2016-04-22
(Revision of ISO 3293:1975)
ISO/FDIS 3294 * Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
2016-04-20
(Revision of ISO 3294:1975)
TC 34 Food products
ISO/FDIS 16634-2
* Food products — Determination of the total nitrogen content by combustion according to the Du-mas principle and calculation of the crude protein content — Part 2: Cereals, pulses and milled cereal products
2016-04-12
(Revision of ISO/TS 16634-2:2009)
ISO/FDIS 16140-1.2
* Microbiology of the food chain — Method validation — Part 1: Vocabulary
2016-04-12
(Revision of ISO 16140:2003, ISO 16140:2003/Amd 1:2011)
ISO/FDIS 16140-2.2
* Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
2016-04-12
(Revision of ISO 16140:2003, ISO 16140:2003/Amd 1:2011)
ISO/FDIS 11702
* Animal and vegetable fats and oils — Enzymatic determination of total sterols content
2016-05-26
(Revision of ISO 11702:2009)
ISO/FDIS 12966-3
* Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 3: Preparation of methyl esters using trimethylsulfonium hydrox-ide (TMSH)
2016-04-12
(Revision of ISO 12966-3:2009)
ISO/FDIS 21033
* Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spec-troscopy (ICP-OES)
2016-04-09
(Revision of ISO/TS 21033:2011, ISO/TS 21033:2011/Amd 1:2012)
TC 35 Paints and varnishes
ISO/FDIS 4629-1
* Binders for paints and varnishes — Determination of hydroxyl value — Part 1: Titrimetric method without using a catalyst
2016-04-19
(Revision of ISO 4629:1996)
ISO/FDIS 4629-2
* Binders for paints and varnishes — Determination of hydroxyl value — Part 2: Method using a catalyst
2016-04-19
TC 38 Textiles
ISO/FDIS 105-G01
* Textiles — Tests for colour fast-ness — Part G01: Colour fast-ness to nitrogen oxides
2016-04-12
(Revision of ISO 105-G01:1993, ISO 105-G01:1993/Cor 1:1995)
ISO/FDIS 105-G04
* Textiles — Tests for colour fastness — Part G04: Colour fastness to nitric oxide in the atmosphere at high humidities
2016-04-11
(Revision of ISO 105-G04:1989)
TC 44 Welding and allied processes
ISO/FDIS 14171
* Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification
2016-04-05
(Revision of ISO 14171:2010)
TC 45 Rubber and rubber products
ISO/FDIS 813 * Rubber, vulcanized or thermo-plastic — Determination of adhe-sion to a rigid substrate — 90 degree peel method
2016-04-09
(Revision of ISO 813:2010)
ISO/FDIS 14558
* Rubber — Determination of residual unsaturation of hydro-genated nitrile rubber (HNBR) by infrared spectroscopy
2016-04-11
(Revision of ISO 14558:2000)
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/FDIS 17785-1.2
* Testing methods for pervious concrete — Part 1: Infiltration rate
2016-04-23
TC 72 Textile machinery and accessories
ISO/FDIS 11111-1
* Textile machinery — Safety requirements — Part 1: Common requirements
2016-04-05
(Revision of ISO 11111-1:2009)
ISO 11111-2:2005/FDAmd 2
* Textile machinery — Safety requirements — Part 2: Spin-ning preparatory and spinning machines — Amendment 2
2016-04-05
ISO Update, Supplement to ISO Focus -- March 2016 9
ISO 11111-3:2005/FDAmd 2
* Textile machinery — Safety re-quirements — Part 3: Nonwoven machinery — Amendment 2
2016-04-05
ISO 11111-4:2005/FDAmd 2
* Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
2016-04-05
ISO 11111-5:2005/FDAmd 2
* Textile machinery — Safety requirements — Part 5: Prepara-tory machinery to weaving and knitting — Amendment 2
2016-04-05
ISO 11111-6:2005/FDAmd 2
* Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery — Amendment 2
2016-04-05
ISO 11111-7:2005/FDAmd 2
* Textile machinery — Safety re-quirements — Part 7: Dyeing and finishing machinery — Amend-ment 2
2016-04-05
TC 92 Fire safety
ISO 12863:2010/FDAmd 1
* Standard test method for as-sessing the ignition propensity of cigarettes — Amendment 1
2016-04-12
TC 96 Cranes
ISO/FDIS 4306-3
* Cranes — Vocabulary — Part 3: Tower cranes
2016-04-18
(Revision of ISO 4306-3:2003, ISO 4306-3:2003/Amd 1:2011)
ISO/FDIS 4301-1
* Cranes — Classification — Part 1: General
2016-04-17
TC 106 Dentistry
ISO/FDIS 10139-2
* Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use
2016-04-12
(Revision of ISO 10139-2:2009)
TC 121 Anaesthetic and respiratory equipment
IEC 80601-2-35:2009/FDAmd 1
Medical electrical equipment — Part 2-35: Particular require-ments for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use — Amendment 1
2016-04-12
TC 127 Earth-moving machinery
ISO/FDIS 15818
* Earth-moving machinery — Lifting and tying-down attach-ment points — Performance requirements
2016-04-21
TC 130 Graphic technology
ISO/FDIS 19445
* Graphic technology — Metadata for graphic arts workflow — XMP metadata for image and docu-ment proofing
2016-04-11
TC 131 Fluid power systems
ISO/FDIS 3601-2
* Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
2016-04-03
(Revision of ISO 3601-2:2008)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/FDIS 16486-4
* Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
2016-04-18
TC 142 Cleaning equipment for air and other gases
ISO/FDIS 15858
* UV-C Devices — Safety infor-mation — Permissible human exposure
2016-04-05
ISO/FDIS 16170
* In situ test methods for very high efficiency filter systems in industrial facilities
2016-04-05
TC 150 Implants for surgery
ISO/FDIS 7206-13
* Implants for surgery — Partial and total hip joint prostheses — Part 13: Determination of resist-ance to torque of head fixation of stemmed femoral components
2016-04-11
TC 155 Nickel and nickel alloys
ISO/FDIS 8049 * Ferronickel shot — Sampling for analysis
2016-04-26
(Revision of ISO 8049:1988)
TC 168 Prosthetics and orthotics
ISO/FDIS 10328
* Prosthetics — Structural testing of lower-limb prostheses — Re-quirements and test methods
2016-04-12
(Revision of ISO 10328:2006)
ISO/FDIS 22675
* Prosthetics — Testing of ankle-foot devices and foot units — Requirements and test methods
2016-04-12
(Revision of ISO 22675:2006)
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO/FDIS 13543
* Copper, lead, zinc and nickel sulfide concentrates — Deter-mination of mass of contained metal in a lot
2016-04-23
(Revision of ISO 13543:1996)
TC 185 Safety devices for protec-tion against excessive pressure
ISO 4126-1:2013/FDAmd 1
* Safety devices for protection against excessive pressure — Part 1: Safety valves — Amend-ment 1
2016-04-19
ISO 4126-5:2013/FDAmd 1
* Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Amendment 1
2016-04-19
ISO 4126-7:2013/FDAmd 1
* Safety devices for protection against excessive pressure — Part 7: Common data — Amend-ment 1
2016-04-19
TC 188 Small craft
10 ISO Update, Supplement to ISO Focus -- March 2016
ISO/FDIS 8666 * Small craft — Principal data
2016-04-26
(Revision of ISO 8666:2002)
TC 210 Quality management and corresponding general as-pects for medical devices
ISO/FDIS 80369-3
* Small-bore connectors for liquids and gases in healthcare applica-tions — Part 3: Connectors for enteral applications
2016-04-05
TC 257 Evaluation of energy savings
ISO/FDIS 17743
* Energy savings — Definition of a methological framework applica-ble to calculation and reporting on energy savings
2016-04-19
JTC 1 Information technology
ISO/IEC FDIS 25066
* Systems and software engineer-ing — Systems and software Quality Requirements and Evalu-ation (SQuaRE) — Common industry Format for Usability — Evaluation Report
2016-04-16
ISO/IEC FDIS 14443-2
* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface
2016-04-26
(Revision of ISO/IEC 14443-2:2010, ISO/IEC 14443-2:2010/Amd 1:2011, ISO/IEC 14443-2:2010/Amd 2:2012, ISO/IEC 14443-2:2010/Amd 3:2012, ISO/IEC 14443-2:2010/FDAmd 5)
ISO/IEC FDIS 18370-2
* Information technology — Se-curity techniques — Blind digital signatures — Part 2: Discrete logarithm based mechanisms
2016-04-16
ISO/IEC FDIS 24760-3
* Information technology — Secu-rity techniques — A framework for identity management — Part 3: Practice
2016-04-19
ISO/IEC FDIS 27009
* Information technology — Secu-rity techniques — Sector-specific application of ISO/IEC 27001 — Requirements
2016-04-05
ISO/IEC FDIS 27033-6
* Information technology — Secu-rity techniques — Network secu-rity — Part 6: Securing wireless IP network access
2016-04-19
ISO/IEC FDIS 27035-1
* Information technology — Se-curity techniques — Information security incident management — Part 1: Principles of incident management
2016-04-16
(Revision of ISO/IEC 27035:2011)
ISO/IEC FDIS 27035-2
* Information technology — Se-curity techniques — Information security incident management — Part 2: Guidelines to plan and prepare for incident response
2016-04-16
(Revision of ISO/IEC 27035:2011)
ISO/IEC FDIS 29192-5
* Information technology — Se-curity techniques — Light-weight cryptography — Part 5: Hash-functions
2016-04-19
ISO/IEC FDIS 23000-15
* Information technology — Mul-timedia application format (MPEG-A) — Part 15: Multimedia preservation application
2016-04-05
ISO/IEC 23008-5:2015/FDAmd 2
* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 5: Reference software for high efficiency video coding — Amendment 2: Refer-ence Software for the Multiview Main Profile of HEVC
2016-04-05
ISO/IEC FDIS 18384-1.2
* Information technology — Refer-ence Architecture for Service Oriented Architecture (SOA RA) — Part 1: Terminology and concepts for SOA
2016-04-19
ISO/IEC FDIS 18384-2.2
* Information technology — Refer-ence Architecture for Service Oriented Architecture (SOA RA) — Part 2: Reference Architecture for SOA Solutions
2016-04-19
ISO/IEC FDIS 18384-3.2
* Information Technology — Refer-ence Architecture for Service Oriented Architecture (SOA RA) — Part 3: Service Oriented Architecture Ontology
2016-04-19
Standards published
New International Standards published between 01 February and 29 February 2016
* Available in English only
** French version of standard previously published in English only
Price
group
TC 10 Technical product documentation
ISO 18388:2016
* Technical product documentation (TPD) — Relief grooves — Types and dimensioning
B
TC 17 Steel
ISO 4829-2:2016
Steels — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 % and 0,05 %
B
ISO 4938:2016 Steel and iron — Determination of nickel content — Gravimetric or titri-metric method
C
ISO 4946:2016 Steel and cast iron — Determination of copper — 2,2'-Biquinoline spectropho-tometric method
B
ISO Update, Supplement to ISO Focus -- March 2016 11
ISO 17577:2016
* Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
C
TC 20 Aircraft and space vehicles
ISO 3209:2016 * Aerospace — Nuts, anchor, self-lock-ing, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
A
ISO 9154:2016 * Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Pro-curement specification
D
ISO 9609:2016 * Aerospace — Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 900 MPa (at ambient temperature) /235 degrees C, 900 MPa (at ambient temperature) /315 degrees C, 900 MPa (at ambient temperature) /650 degrees C, 1 100 MPa (at ambient temperature) /235 degrees C, 1 100 MPa (at ambient temperature) /730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions
A
ISO 9618:2016 * Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifi-cations: 450 MPa (at ambient tem-perature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient tem-perature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient tem-perature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient tempera-ture)/600 degrees C — Dimensions
A
ISO 12260:2016
* Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
A
ISO 12261:2016
* Aerospace — Screws, pan head, inter-nal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
A
ISO 12289:2016
* Aerospace — Rivets, solid, in corro-sion-resisting steel — Procurement specification
B
TC 22 Road vehicles
ISO 6624-2:2016
* Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron
C
ISO 6624-4:2016
* Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel
D
ISO 12156-1:2016
* Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method
C
ISO 3917:2016 * Road vehicles — Safety glazing materi-als — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
B
TC 23 Tractors and machinery for agri-culture and forestry
ISO 5131:2015 Tractors for agriculture and forestry — Measurement of noise at the operator's position — Survey method
C
ISO 11001-1:2016
Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler
B
TC 29 Small tools
ISO/TS 13399-204:2016
* Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming
C
ISO/TS 13399-303:2016
* Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills
E
ISO/TS 13399-304:2016
* Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole
E
ISO/TS 13399-307:2016
* Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts
G
ISO/TS 13399-308:2016
* Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts
F
ISO/TS 13399-312:2016
* Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts
F
ISO/TS 13399-401:2016
* Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items
E
ISO 22917:2016
Precision superabrasives — Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
C
ISO 16916:2016
Tools for moulding — Tool specification sheet for injection moulds
B
TC 34 Food products
ISO 13904:2016
Animal feeding stuffs — Determination of tryptophan content
C
ISO 6885:2016 Animal and vegetable fats and oils — Determination of anisidine value
B
12 ISO Update, Supplement to ISO Focus -- March 2016
ISO 6886:2016 * Animal and vegetable fats and oils — Determination of oxidative stability (accelerated oxidation test)
C
ISO 27608:2010/Amd 1:2016
Animal and vegetable fats and oils — Determination of Lovibond® colour — Automatic method — Amendment 1
XZ
ISO 5495:2005/Amd 1:2016
Sensory analysis — Methodology — Paired comparison test — Amendment 1
XZ
TC 35 Paints and varnishes
ISO 2811-1:2016
Paints and varnishes — Determina-tion of density — Part 1: Pycnometer method
B
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
B
TC 37 Terminology and other language and content resources
ISO 24617-6:2016
* Language resource management — Semantic annotation framework — Part 6: Principles of semantic annotation (SemAF Principles)
E
TC 39 Machine tools
ISO 230-2:2014/Amd 1:2016
Test code for machine tools — Part 2: Determination of accuracy and repeat-ability of positioning of numerically controlled axes — Amendment 1
XZ
ISO 230-10:2016
Test code for machine tools — Part 10: Determination of the measuring perfor-mance of probing systems of numeri-cally controlled machine tools
F
TC 43 Acoustics
ISO 16283-3:2016
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation
F
TC 44 Welding and allied processes
ISO/TS 18166:2016
Numerical welding simulation — Ex-ecution and documentation
D
ISO 669:2016 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
F
ISO 9454-1:2016
Soft soldering fluxes — Classification and requirements — Part 1: Classifica-tion, labelling and packaging
B
TC 45 Rubber and rubber products
ISO 289-2:2016
Rubber, unvulcanized — Determina-tions using a shearing-disc viscometer — Part 2: Determination of pre-vulcani-zation characteristics
B
ISO 18898:2016
Rubber — Calibration and verification of hardness testers
D
ISO 23233:2016
Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc
B
TC 46 Information and documentation
ISO 11799:2015
Information and documentation — Document storage requirements for archive and library materials
B
ISO/TS 18344:2016
* Effectiveness of paper deacidification processes
C
TC 58 Gas cylinders
ISO 11119-4:2016
* Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fi-bre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
F
TC 61 Plastics
ISO 4892-3:2016
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
C
ISO/TR 18486:2016
* Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
B
ISO 17855-2:2016
Plastics — Polyethylene (PE) mould-ing and extrusion materials — Part 2: Preparation of test specimens and determination of properties
B
ISO 19069-2:2016
Plastics — Polypropylene (PP) mould-ing and extrusion materials — Part 2: Preparation of test specimens and determination of properties
B
ISO 18188:2016
Specification of polypropylene drinking straws
B
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO 16904:2016
* Petroleum and natural gas industries — Design and testing of LNG marine transfer arms for conventional onshore terminals
G
ISO 17348:2016
* Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment
C
ISO 17349:2016
* Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures
F
ISO 21809-3:2016
* Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
H
ISO 19901-5:2016
* Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction
G
TC 69 Applications of statistical methods
ISO 7870-6:2016
Control charts — Part 6: EWMA control charts
D
TC 70 Internal combustion engines
ISO Update, Supplement to ISO Focus -- March 2016 13
ISO 4548-14:2016
Methods of test for full-flow lubricat-ing oil filters for internal combustion engines — Part 14: Cold start simula-tion and hydraulic pulse durability for composite filter housings
A
TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use
ISO 8362-5:2016
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
B
TC 83 Sports and other recreational facilities and equipment
ISO 20187:2016
* Inflatable play equipment — Safety requirements and test methods
F
TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection
ISO 11665-9:2016
Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials
F
ISO 16637:2016
* Radiological protection — Monitoring and internal dosimetry for staff mem-bers exposed to medical radionuclides as unsealed sources
E
TC 92 Fire safety
ISO 9705-1:2016
Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration
F
TC 94 Personal safety -- Protective clothing and equipment
ISO 17491-4:2008/Amd 1:2016
Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) — Amendment 1
XZ
TC 96 Cranes
ISO 8566-2:2016
Cranes — Cabins and control stations — Part 2: Mobile cranes
A
ISO 9926-3:2016
Cranes — Training of operators — Part 3: Tower cranes
A
TC 102 Iron ore and direct reduced iron
ISO/TR 18336:2016
* Guidelines for good XRF laboratory practice for the iron ore industry
E
TC 106 Dentistry
ISO 9693-2:2016
Dentistry — Compatibility testing — Part 2: Ceramic-ceramic systems
B
TC 107 Metallic and other inorganic coatings
ISO 11177:2016
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
A
ISO 18555:2016
* Metallic and other inorganic coatings — Determination of thermal conductiv-ity of thermal barrier coatings
C
ISO 28721-5:2016
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5: Presentation and characterization of defects
C
TC 108 Mechanical vibration, shock and condition monitoring
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Require-ments for instruments for measuring vibration severity
C
ISO 16063-21:2003/Amd 1:2016
* Methods for the calibration of vibration and shock transducers — Part 21: Vi-bration calibration by comparison to a reference transducer — Amendment 1
XZ
ISO 14835-1:2016
Mechanical vibration and shock — Cold provocation tests for the assess-ment of peripheral vascular function — Part 1: Measurement and evaluation of finger skin temperature
B
TC 110 Industrial trucks
ISO 10896-2:2016
* Rough-terrain trucks — Safety require-ments and verification — Part 2: Slew-ing trucks
F
TC 113 Hydrometry
ISO/TR 21414:2016
* Hydrometry — Groundwater — Surface geophysical surveys for hydrogeologi-cal purposes
G
TC 119 Powder metallurgy
ISO 4499-3:2016
* Hardmetals — Metallographic deter-mination of microstructure — Part 3: Measurement of microstructural fea-tures in Ti (C, N) and WC/cubic carbide based hardmetals
D
ISO 4499-4:2016
* Hardmetals — Metallographic deter-mination of microstructure — Part 4: Characterisation of porosity, carbon defects and eta-phase content
B
TC 121 Anaesthetic and respiratory equipment
ISO 5360:2016 Anaesthetic vaporizers — Agent-spe-cific filling systems
D
ISO 80601-2-13:2011/Amd 1:2015
Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amend-ment 1
XZ
ISO 14408:2016
Tracheal tubes designed for laser sur-gery — Requirements for marking and accompanying information
B
ISO 7396-1:2016
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
H
ISO 11197:2016
Medical supply units
D
TC 131 Fluid power systems
14 ISO Update, Supplement to ISO Focus -- March 2016
ISO 15171-2:2016
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Cou-pling with M16 x 2 end for connection under pressure
B
TC 135 Non-destructive testing
ISO 12707:2016
Non-destructive testing — Magnetic particle testing — Vocabulary
A
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 8639:2016 * Glass-reinforced thermosetting plas-tics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
B
TC 147 Water quality
ISO 19827:2016
* Water quality — Determination of the acute toxicity to the freshwater rotifer Brachionus calyciflorus
C
TC 159 Ergonomics
ISO 9241-161:2016
Ergonomics of human-system interac-tion — Part 161: Guidance on visual user-interface elements
G
ISO 9241-391:2016
Ergonomics of human-system inter-action — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures
C
TC 160 Glass in building
ISO 1288-1:2016
* Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
C
ISO 1288-2:2016
* Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat speci-mens with large test surface areas
C
ISO 1288-3:2016
* Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
B
ISO 1288-4:2016
* Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
B
ISO 1288-5:2016
* Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat speci-mens with small test surface areas
B
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23551-8:2016
* Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls
B
TC 172 Optics and photonics
ISO 14490-3:2016
* Optics and photonics — Test methods for telescopic systems — Part 3: Test methods for telescopic sights
C
ISO 11145:2016
Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols
D
TC 181 Safety of toys
ISO/TR 8124-8:2016
* Safety of toys — Part 8: Age determi-nation guidelines
F
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 10378:2016
* Copper, lead and zinc sulfide concen-trates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method
F
TC 184 Automation systems and integration
ISO 10303-21:2016
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 21: Implementation methods: Clear text encoding of the exchange structure
A
TC 188 Small craft
ISO 11592-1:2016
Small craft — Determination of maxi-mum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m
B
TC 190 Soil quality
ISO 15009:2016
Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption
D
ISO 17586:2016
Soil quality — Extraction of trace ele-ments using dilute nitric acid
C
ISO 22155:2016
Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method
D
TC 194 Biological and clinical evaluation of medical devices
ISO 22442-1:2015
Medical devices utilizing animal tissues and their derivatives — Part 1: Applica-tion of risk management
E
ISO 22442-2:2015
Medical devices utilizing animal tissues and their derivatives — Part 2: Controls on sourcing, collection and handling
C
TC 198 Sterilization of health care products
ISO 15883-7:2016
* Washer-disinfectors — Part 7: Require-ments and tests for washer-disinfec-tors employing chemical disinfection for non-invasive, non-critical thermo-labile medical devices and healthcare equipment
E
TC 204 Intelligent transport systems
ISO 14296:2016
* Intelligent transport systems — Exten-sion of map database specifications for applications of cooperative ITS
H
TC 207 Environmental management
ISO 14004:2016
Environmental management sys-tems — General guidelines on implementation
G
ISO Update, Supplement to ISO Focus -- March 2016 15
TC 210 Quality management and cor-responding general aspects for medical devices
ISO 13485:2016
Medical devices — Quality manage-ment systems — Requirements for regulatory purposes
F
TC 217 Cosmetics
ISO 16128-1:2016
Guidelines on technical definitions and criteria for natural and organic cos-metic ingredients and products — Part 1: Definitions for ingredients
B
TC 218 Timber
ISO 8903:2016 * Broadleaved sawn timber — Nominal sizes
A
TC 261 Additive manufacturing
ISO/ASTM 52915:2016
Specification for Additive Manufactur-ing File Format (AMF) Version 1.2
D
TC 299 Robots and robotic devices
ISO/TS 15066:2016
* Robots and robotic devices — Col-laborative robots
E
TMBG Technical Management Board - groups
ISO/IEC 80079-38:2016
* Explosive atmospheres — Part 38: Equipment and components in ex-plosive atmospheres in underground mines
H
ISO/IEC 80079-20-2:2016
* Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test methods
H
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 2417:2016 Leather — Physical and mechanical tests — Determination of the static absorption of water
A
ISO 2589:2016 Leather — Physical and mechanical tests — Determination of thickness
A
ISO 3377-2:2016
Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear
A
ISO 17229:2016
Leather — Physical and mechanical tests — Determination of water vapour absorption
A
ISO 17236:2016
Leather — Physical and mechanical tests — Determination of extension set
A
ISO 19070:2016
Leather — Chemical determination of N-methyl-2-pyrrolidone (NMP) in leather
A
ISO 19071:2016
Leather — Chemical tests — Determi-nation of chromium (VI) and the reduc-tive potential for chromium tanning agents
A
JTC 1 Information technology
ISO/IEC 14651:2016
* Information technology — Interna-tional string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
F
ISO/IEC/IEEE 8802-1X:2013/Amd 1:2016
* Information technology — Telecom-munications and information exchange between systems — Local and metropolitan area networks — Part 1X: Port-based network access control — Amendment 1: MAC security key agreement protocol (MKA) extensions
H
ISO/IEC 14543-3-11:2016
* Information technology — Home electronic system (HES) — Part 3-11: Frequency Modulated Wireless Short-Packet (FMWSP) protocol optimised for energy harvesting — Architecture and lower layer protocols
D
ISO/IEC 27000:2016
* Information technology — Security techniques — Information security management systems — Overview and vocabulary
E
ISO/IEC 28360:2015
* Information technology — Office equipment — Determination of chemi-cal emission rates from electronic equipment
F
ISO/IEC 28360:2015/Cor 1:2016
* Information technology — Office equipment — Determination of chemi-cal emission rates from electronic equipment — Technical Corrigendum 1
free
ISO/IEC 23001-7:2016
* Information technology — MPEG systems technologies — Part 7: Com-mon encryption in ISO base media file format files
D
ISO/IEC 15418:2016
* Information technology — Automatic identification and data capture tech-niques — GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
A
ISO/IEC 19762:2016
* Information technology — Automatic identification and data capture (AIDC) techniques — Harmonized vocabulary
H
Standards confirmed
The following International Standards are confimred for a five year period:
TC 6 Paper, board and pulps
ISO 3039:2010
TC 8 Ships and marine technology
ISO 3796:1999 (reconfirmed)
ISO 5894:1999 (reconfirmed)
TC 11 Boilers and pressure vessels
ISO 16528-1:2007 (reconfirmed)
ISO 16528-2:2007 (reconfirmed)
TC 17 Steel
ISO 2566-1:1984 (reconfirmed)
ISO 2566-2:1984 (reconfirmed)
TC 20 Aircraft and space vehicles
16 ISO Update, Supplement to ISO Focus -- March 2016
ISO 7481:2000 (reconfirmed)
ISO 8641:2008
ISO 8642:2008
TC 27 Solid mineral fuels
ISO 7936:1992 (reconfirmed)
ISO 8858-2:2004 (reconfirmed)
ISO 8858-3:2004 (reconfirmed)
ISO 20905:2004 (reconfirmed)
ISO 157:1996 (reconfirmed)
ISO 562:2010
ISO 609:1996 (reconfirmed)
ISO 625:1996 (reconfirmed)
ISO 687:2010
ISO 1018:1975 (reconfirmed)
ISO 1171:2010
ISO 7404-2:2009
ISO 7404-3:2009
ISO 7404-5:2009
ISO 17246:2010
ISO 29541:2010
TC 29 Small tools
ISO 3338-1:1996 (reconfirmed)
ISO 3338-3:1996 (reconfirmed)
ISO 8695:2010
ISO 9181:2007 (reconfirmed)
ISO 9449:2007 (reconfirmed)
ISO 11900-1:2007 (reconfirmed)
ISO 11901-1:2003 (reconfirmed)
TC 30 Measurement of fluid flow in closed conduits
ISO 9951:1993 (reconfirmed)
TC 33 Refractories
ISO 12676:2000 (reconfirmed)
TC 34 Food products
ISO 17997-1:2004
ISO 17997-2:2004
TC 43 Acoustics
ISO 10140-2:2010
ISO 10140-3:2010
ISO 10140-5:2010
TC 106 Dentistry
ISO 21606:2007 (reconfirmed)
TC 110 Industrial trucks
ISO 3691-5:2014
TC 113 Hydrometry
ISO 4374:1990 (reconfirmed)
TC 130 Graphic technology
ISO 12218:1997 (reconfirmed)
ISO 12645:1998 (reconfirmed)
ISO 16612-1:2005 (reconfirmed)
ISO 28178:2009
TC 131 Fluid power systems
ISO 21018-1:2008
TC 132 Ferroalloys
ISO 310:1992
ISO 312:1986
ISO 315:1984
ISO 317:1984
ISO 320:1981
ISO 548:1981
ISO 549:1981
ISO 619:1981
ISO 4293:1982
ISO 4295:1988
ISO 4296-1:1984
ISO 4296-2:1983
ISO 4297:1978
ISO 4298:1984
ISO 4299:1989
ISO 4571:1981
ISO 5889:1983
ISO 5890:1981
ISO 5975:1983
ISO 5997:1984
ISO 6127:1981
ISO 6129:1981
ISO 6130:1985
ISO 6153:1989
ISO 6154:1989
ISO 6230:1989
ISO 6233:1983
ISO 6331:1983
ISO 6629:1981
ISO 7723:1984
ISO 7953:1985
ISO 7969:1985
ISO 7990:1985
ISO 8530:1986
ISO 8531:1986
ISO 8541:1986
ISO 8542:1986
ISO 8889:1988
ISO 9292:1988
ISO 9681:1990
TC 147 Water quality
ISO 11704:2010
TC 172 Optics and photonics
ISO 9385:1990 (reconfirmed)
ISO 9689:1990 (reconfirmed)
ISO 12844:1999 (reconfirmed)
ISO 15004-2:2007
TC 173 Assistive products for persons with disability
ISO 7176-9:2009
TC 193 Natural gas
ISO 15403-1:2006 (reconfirmed)
ISO 12213-3:2006 (reconfirmed)
ISO 23874:2006 (reconfirmed)
TC 198 Sterilization of health care products
ISO 11140-3:2007 (reconfirmed)
ISO 11140-4:2007 (reconfirmed)
ISO Update, Supplement to ISO Focus -- March 2016 17
ISO 11140-5:2007 (reconfirmed)
ISO 15883-2:2006 (reconfirmed)
ISO 15883-3:2006 (reconfirmed)
TC 201 Surface chemical analysis
ISO 22048:2004 (reconfirmed)
ISO 14237:2010
TC 221 Geosynthetics
ISO 12236:2006 (reconfirmed)
ISO 13431:1999 (reconfirmed)
ISO 13433:2006 (reconfirmed)
JTC 1 Information technology
ISO/IEC 11581-6:1999
(reconfirmed)
ISO/IEC 14754:1999
(reconfirmed)
ISO/IEC 15411:1999
(reconfirmed)
ISO/IEC 15412:1999
(reconfirmed)
ISO/IEC TS 20071-11:2012
Standards withdrawn
Period from 01 February to 29 February 2016
TC 20 Aircraft and space vehicles
ISO 6965:1982 (replaced by )
TC 22 Road vehicles
ISO 15765-3:2004 (replaced by ISO 14229-3:2012)
TC 23 Tractors and machinery for agriculture and forestry
ISO 11787:1995 (replaced by )
ISO 11788-1:1997 (replaced by )
ISO 11788-2:2000 (replaced by )
ISO 11788-3:2000 (replaced by )
TC 43 Acoustics
ISO 12124:2001 (replaced by )
ISO 140-5:1998 (replaced by ISO 16283-1:2014, ISO 16283-3:2016)
TC 61 Plastics
ISO 1872-2:2007 (replaced by ISO 17855-2:2016)
ISO 1873-2:2007 (replaced by ISO 19069-2:2016)
TC 92 Fire safety
ISO 9705:1993 (replaced by ISO 9705-1:2016)
TC 106 Dentistry
ISO 9693:1999 (replaced by ISO 9693-1:2012, ISO 9693-2:2016)
ISO 9693:1999/Amd 1:2005
(replaced by ISO 9693-1:2012, ISO 9693-2:2016)
TC 110 Industrial trucks
ISO 3691:1980 (replaced by ISO 3691-6:2013)
ISO 3691:1980/Amd 1:1983
(replaced by )
TC 119 Powder metallurgy
ISO 4505:1978 (replaced by ISO 4499-4:2016)
TC 121 Anaesthetic and respiratory equipment
ISO 10083:2006 (replaced by ISO 7396-1:2016)
TC 188 Small craft
ISO 11592:2001 (replaced by ISO 11592-1:2016)
TC 210 Quality management and correspond-ing general aspects for medical devices
ISO/TR 14969:2004
(replaced by ISO 13485:2016)
TC 226 Materials for the production of primary aluminium
ISO 805:1976 (replaced by )
ISO 900:1977 (replaced by )
ISO 1232:1976 (replaced by )
ISO 1617:1976 (replaced by )
ISO 1618:1976 (replaced by )
ISO 2069:1976 (replaced by )
ISO 2070:1997 (replaced by )
ISO 2071:1976 (replaced by )
ISO 2072:1981 (replaced by )
ISO 3390:1976 (replaced by )
JTC 1 Information technology
ISO/IEC 19762-1:2008
(replaced by ISO/IEC 19762:2016)
ISO/IEC 19762-2:2008
(replaced by ISO/IEC 19762:2016)
ISO/IEC 19762-3:2008
(replaced by ISO/IEC 19762:2016)
ISO/IEC 19762-4:2008
(replaced by ISO/IEC 19762:2016)
ISO/IEC 19762-5:2008
(replaced by ISO/IEC 19762:2016)
Meeting calendar
(update at 01 February 2016)
Meetings called for the month of January are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
March 2016
11-12 London (United Kingdom)
TC 225 Market, opinion and social research
14-18 Paris (France) TC 34/SC 18 Food products/Cocoa
14-18 Kanazawa (Japan)
TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
18 ISO Update, Supplement to ISO Focus -- March 2016
14-18 Sydney (Australia)
TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measure-ment and evalua-tion of mechanical vibration and shock as applied to ma-chines, vehicles and structures
14-18 Sydney (Australia)
TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems
15 Geneva (Switzerland)
President's committee
President's committee
15 Basel (Switzerland)
TC 114/SC 3 Horology/Water-resistant watches
15-17 Shanghai (China) TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
16 Geneva (Switzerland)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
16 Geneva (Switzerland)
CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
17 Milan (Italy) TC 221 Geosynthetics
17-18 Geneva (Switzerland)
COUNCIL Council
April 2016
4 New Delhi (India) TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology
4-5 Beijing (China) TC 117 Fans
4-8 London (United Kingdom)
JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
4-8 New Delhi (India) TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection
4-8 Moscow (Rus-sian Federation)
TC 262 Risk management
5 Delft (Netherlands)
TC 219 Floor coverings
5-6 Courbevoie, Paris (France)
TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
7 Delft (Netherlands)
* TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics
7 New Delhi (India) TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection
11-12 Milan (Italy) TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
11-14 Copenhagen (Denmark)
TC 108 Mechanical vibration, shock and condition monitoring
11-14 Copenhagen (Denmark)
TC 108/SC 3 Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments
11-15 Sundsvall (Sweden)
PC 287 Chain of custody of wood and wood-based products
11-15 Sydney (Australia)
** TC 178 Lifts, escalators and moving walks
12 Paris (France) * TC 23/SC 4 Tractors and machin-ery for agriculture and forestry/Tractors
13 Paris (France) TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests
14 Beauvais (France)
TC 23 Tractors and machin-ery for agriculture and forestry
14 Linz (Austria) TC 92/SC 3 Fire safety/Fire threat to people and environment
14 Copenhagen (Denmark)
TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
15 Vienna (Austria) * TC 270 Plastics and rubber machines
18 Helsinki (Finland) TC 300 Solid recovered fuels
18-19 Tampa, Florida (USA)
JTC 1/SC 27 Information tech-nology/IT Security techniques
19-21 Singapore (Singapore)
PC 294 Guidance on unit pricing
20-21 Saint-Denis (France)
TC 17/SC 3 Steel/Steels for struc-tural purposes
22-23 Clausthal-Zeller-feld (Germany)
TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
24-29 Concord, Cali-fornia (USA)
* TC 204 Intelligent transport systems
25 Frankfurt (Germany)
TC 68/SC 4 Financial services/Securities and related financial instruments
25-29 Berlin (Germany) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
26 Sao Jose dos Campos (Brazil)
* TC 20/SC 13 Aircraft and space vehicles/Space data and information trans-fer systems
26 Frankfurt (Germany)
TC 68/SC 7 Financial services/Core banking
ISO Update, Supplement to ISO Focus -- March 2016 19
27 Frankfurt (Germany)
TC 68/SC 2 Financial services/Financial Services, security
28 Frankfurt (Germany)
* TC 68 Financial services
28-29 Las Vegas (USA) TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
29 Kuala Lumpur (Malaysia)
TC 238 Solid biofuels
May 2016
2-6 Sydney (Australia)
PC 277 Sustainable procurement
2-6 Amsterdam (Netherlands)
* TC 215 Health informatics
3-5 Dubaï (United Arab Emirates)
CASCO Committee on con-formity assessment
5-6 Milan (Italy) TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment
5-6 Laramie (USA) TC 265 Carbon dioxide capture, transporta-tion, and geological storage
6-13 Berlin (Germany) TC 10 Technical product documentation
7 Berlin (Germany) TC 10/SC 10 Technical product documentation/Process plant documentation
9-11 Paris (France) TC 34/SC 9 Food products/Microbiology
9-13 Stuttgart (Germany)
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
9-13 Wellington (New Zealand)
TC 46 Information and documentation
9-13 Wellington (New Zealand)
TC 46/SC 4 Information and documentation/Tech-nical interoperability
9-13 Wellington (New Zealand)
TC 46/SC 11 Information and doc-umentation/Archives/records management
9-13 (USA) ** TC 276 Biotechnology
10 Berlin (Germany) TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
10 Virtual (Unknown)
TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
10 Seoul (Korea, Republic of)
TC 122/SC 3 Packaging/Perfor-mance requirements and tests for means of packaging, pack-ages and unit loads (as required by ISO/TC 122)
10-12 Barcelona (Spain)
TC 147/SC 3 Water qual-ity/Radioactivity measurements
11 Berlin (Germany) TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation
11 Virtual (Unknown)
TC 44/SC 12 Welding and allied processes/Soldering materials
11 (Portugal) ** TC 87 Cork
11 Seoul (Korea, Republic of)
TC 122 Packaging
12 Berlin (Germany) * TC 10/SC 1 Technical product documentation/Basic conventions
13 Shanghai (China) * TC 149/SC 1 Cycles/Cycles and major sub-assemblies
16-20 Suzhou (China) JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance
16-20 Chicago (USA) TC 121 Anaesthetic and res-piratory equipment
16-20 Chicago (USA) * TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment
16-20 Chicago (USA) * TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems
17-20 Yokohama (Japan)
TC 22/SC 39 Road vehicles/Ergonomics
18 Essen (Germany) TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
18 Chicago (USA) TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines
19 Yokohama (Japan)
* TC 22/SC 35 Road vehicles/Light-ing and visibility
19-20 Essen (Germany) * TC 44/SC 10 Welding and allied processes/Quality management in the field of welding
19-20 Tokyo (Japan) TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications
22-27 Sapporo (Japan) TC 184/SC 4 Automation systems and integration/Indus-trial data
23-25 Rome (Italy) TC 145 Graphical symbols
23-27 Suzhou (China) * JTC 1/SC 7 Information technol-ogy/Software and systems engineering
23-27 Beijing (China) * TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations
23-27 Tokyo (Japan) TC 35 Paints and varnishes
23-27 Berlin (Germany) TC 130 Graphic technology
20 ISO Update, Supplement to ISO Focus -- March 2016
24 Madrid (Spain) TC 5/SC 5 Ferrous metal pipes and metallic fittings/Threaded fittings, sol-der fittings, welding fittings, pipe threads, thread gauges
24 Rome (Italy) TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours
24 Rome (Italy) TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment
24-26 Reykjavik (Iceland)
TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection
25 Ghent (Belgium) TC 115 Pumps
26 New York (USA) * TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
26-27 (Malaysia) TC 228 Tourism and related services
27 Rome (Italy) * TC 22/SC 38 Road vehicles/Motor-cycles and mopeds
Atlanta (USA) ** TC 86 Refrigeration and air-conditioning
Mexico City (Mexico)
** TC 289 Brand evaluation
May-June 2016
23-24 Duisburg (Germany)
* TC 34/SC 4 Food products/Cere-als and pulses
30-3 Copenhagen (Denmark)
* TC 34/SC 5 Food products/Milk and milk products
31-2 Lulea (Sweden) TC 102/SC 1 Iron ore and direct re-duced iron/Sampling
31-2 Lulea (Sweden) TC 102/SC 2 Iron ore and direct reduced iron/Chemi-cal analysis
31-2 Lulea (Sweden) TC 102/SC 3 Iron ore and direct reduced iron/Physical testing
June 2016
4 Geneva (Switzerland)
* JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information
6-7 Heerbrugg (Switzerland)
TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments
6-8 Paris (France) TC 220 Cryogenic vessels
6-10 Hokaido (Japan) * JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques
6-10 London (United Kingdom)
* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols
6-10 London (United Kingdom)
* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management
6-10 London (United Kingdom)
* TC 69/SC 5 Applications of sta-tistical methods/Ac-ceptance sampling
6-10 London (United Kingdom)
* TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results
6-10 London (United Kingdom)
* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
6-10 London (United Kingdom)
* TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development
7 Winterthur (Switzerland)
TC 5/SC 11 Ferrous metal pipes and metallic fittings/Metal hoses and expansion joints
7-9 Turin (Italy) * TC 274 Light and lighting
7-10 Prague (Czech Republic)
TC 156 Corrosion of metals and alloys
9 Aachen (Germany)
TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes
9-16 Portland, Maine (USA)
* JTC 1/SC 28 Information technol-ogy/Office equipment
10 London (United Kingdom)
* TC 69 Applications of statis-tical methods
13 Geneva (Switzerland)
President's committee
President's committee
13 Stockholm (Sweden)
TC 242 Energy Management
13-17 (Japan) ** TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation
13-17 (Japan) ** TC 282/SC 2 Water reuse/Water reuse in urban areas
13-17 (Japan) ** TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems
14 Virtual (Unknown)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
14-17 Ekaterinburg (Russian Federation)
** REMCO Committee on refer-ence materials
15-16 Geneva (Switzerland)
TMB Technical Manage-ment Board
15-17 Berlin (Germany) TC 44/SC 14 Welding and allied processes/Weld-ing and brazing in aerospace
16-17 Geneva (Switzerland)
COPOLCO Committee on con-sumer policy
16-17 Tromsø (Norway) * TC 211 Geographic in-formation/Geomatics
18-20 Munich (Germany)
TC 135 Non-destructive testing
18-20 Munich (Germany)
* TC 135/SC 3 Non-destructive test-ing/Ultrasonic testing
ISO Update, Supplement to ISO Focus -- March 2016 21
18-20 Munich (Germany)
* TC 135/SC 4 Non-destructive testing/Eddy current methods
18-20 Munich (Germany)
* TC 135/SC 5 Non-destructive testing/Radiation methods
18-20 Munich (Germany)
* TC 135/SC 6 Non-destructive test-ing/Leak detection methods
18-20 Munich (Germany)
* TC 135/SC 7 Non-destructive testing/Personnel qualification
18-20 Munich (Germany)
* TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
20-21 Berlin (Germany) * TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects
20-23 Delft (Netherlands)
TC 272 Forensic sciences
20-24 Frankfurt (Germany)
** JTC 1/SC 39 Information technol-ogy/Sustainability for and by Information Technology
20-24 Tedding-ton (United Kingdom)
TC 43/SC 3 Acoustics/Underwa-ter acoustics
20-25 Prague (Czech Republic)
* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
21 Istanbul (Turkey) * TC 120 Leather
21 Istanbul (Turkey) * TC 120/SC 3 Leather/Leather products
21-22 Düsseldorf (Germany)
TC 17/SC 10 Steel/Steel for pres-sure purposes
21-22 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment
22 Istanbul (Turkey) * TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts
22-23 Porto (Portugal) TC 17/SC 17 Steel/Steel wire rod and wire products
22-23 Porto (Portugal) TC 269 Railway applications
23 Schonach (Germany)
** TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
23 Istanbul (Turkey) * TC 120/SC 2 Leather/Tanned leather
24 Porto (Portugal) * TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets
27 Nicosia (Cyprus) * TC 193 Natural gas
27-28 Frankfurt (Germany)
TC 184 Automation systems and integration
29-30 Beijing (China) * TC 20/SC 16 Aircraft and space vehicles/Unmanned aircraft systems
30 Geneva (Switzerland)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
(Canada) ** TC 159/SC 1 Ergonomics/General ergonomics principles
June-July 2016
25-1 Copenhagen (Denmark)
** TC 37 Terminology and other language and content resources
27-1 London (United Kingdom)
* TC 188 Small craft
27-1 Nicosia (Cyprus) * TC 193/SC 1 Natural gas/Analysis of natural gas
27-1 Nicosia (Cyprus) * TC 193/SC 3 Natural gas/Upstream area
27-1 (Unknown) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
27-1 Hangzhou (China)
** TC 268 Sustainable develop-ment in communities
27-1 Hangzhou (China)
** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures
1st Semester 2016
New Delhi (India) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
July 2016
4-8 Paris (France) ** TC 34 Food products
5-8 Shanghai (China) * TC 8/SC 8 Ships and marine technology/Ship design
14 Tokyo (Japan) * TC 261 Additive manufacturing
15 Greenville (USA) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
(Australia) ** TC 281 Fine Bubble Technology
August 2016
19 Berlin (Germany) ** TC 206 Fine ceramics
22-26 Beijing (China) * JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
25 Virtual (Unknown)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
31 Stockholm (Sweden)
* TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
(USA) ** TC 91 Surface active agents
September 2016
1 Stockholm (Sweden)
TC 6 Paper, board and pulps
5-9 Bilbao (Spain) * TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock
5-10 Changsha (China)
* TC 96/SC 6 Cranes/Mobile cranes
22 ISO Update, Supplement to ISO Focus -- March 2016
5-10 Sydney (Australia)
* TC 147 Water quality
9 Beijing (China) President's committee
President's committee
10 Beijing (China) TMB Technical Manage-ment Board
10-16 San José, Cali-fornia (USA)
* TC 130 Graphic technology
11 Beijing (China) * COUNCIL Council
11 Beijing (China) DEVCO Committee on devel-oping country matters
11-16 Tromsø (Norway) * TC 106/SC 1 Dentistry/Filling and restorative materials
11-16 Tromsø (Norway) * TC 106/SC 2 Dentistry/Prosthodon-tic materials
11-16 Tromsø (Norway) * TC 106/SC 3 Dentistry/Terminology
11-16 Tromsø (Norway) * TC 106/SC 4 Dentistry/Dental instruments
11-16 Tromsø (Norway) * TC 106/SC 6 Dentistry/Dental equipment
11-16 Tromsø (Norway) ** TC 106/SC 7 Dentistry/Oral care products
11-16 Tromsø (Norway) * TC 106/SC 8 Dentistry/Dental implants
11-16 Tromsø (Norway) * TC 106/SC 9 Dentistry/Dental CAD/CAM systems
12-13 Beijing (China) * GA General Assembly
12-13 Peterbor-ough (United Kingdom)
* TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment
12-13 Stavanger (Norway)
* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
13 Beijing (China) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
17-21 Shanghai (China) * TC 2/SC 7 Fasteners/Reference standards
17-21 Shanghai (China) * TC 2/SC 11 Fasteners/Fasteners with metric external thread
17-21 Shanghai (China) * TC 2/SC 12 Fasteners/Fasteners with metric internal thread
17-21 Amman (Jordan) * TC 262 Risk management
19-20 Xian (China) * TC 33 Refractories
19-22 Atlanta (USA) * TC 142 Cleaning equipment for air and other gases
19-23 Berlin (Germany) ** TC 61 Plastics
19-23 Sydney (Australia)
* TC 150 Implants for surgery
19-25 Melbourne (Australia)
* TC 165 Timber structures
20-22 Yichang (China) ** TC 256 Pigments, dyestuffs and extenders
20-22 Stockholm (Sweden)
** TC 264 Fireworks
21-23 Beijing (China) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
21-23 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables
23 Barcelona (Spain)
* TC 254 Safety of amusement rides and amusement devices
26-30 San José, Cali-fornia (USA)
* JTC 1/SC 2 Information technol-ogy/Coded character sets
26-30 Seoul (Korea, Republic of)
** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
26-30 Burlington, Ver-mont (USA)
** TC 146/SC 3 Air quality/Ambient atmospheres
26-30 Burlington, Ver-mont (USA)
** TC 146/SC 6 Air quality/Indoor air
26-30 Berlin (Germany) ** TC 163 Thermal performance and energy use in the built environment
26-30 Berlin (Germany) ** TC 205 Building environment design
26-30 (Canada) ** TC 218 Timber
28 Delft (Netherlands)
* TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels
28-29 Delft (Netherlands)
* TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products
29 Delft (Netherlands)
* TC 28/SC 4 Petroleum products and related prod-ucts of synthetic or biological origin/Classifications and specifications
29 Delft (Netherlands)
* TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels
29-30 (France) ** TC 17 Steel
30 Delft (Netherlands)
* TC 28 Petroleum products and related products of synthetic or bio-logical origin
30 Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines
30 Burlington, Ver-mont (USA)
** TC 146/SC 1 Air quality/Stationary source emissions
Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
(Asia) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
Burlington, Ver-mont (USA)
** TC 146/SC 2 Air quality/Workplace atmospheres
Sao Paulo (Brazil)
** TC 173 Assistive products for persons with disability
ISO Update, Supplement to ISO Focus -- March 2016 23
Sao Paulo (Brazil)
** TC 173/SC 1 Assistive products for persons with disability/Wheelchairs
Sao Paulo (Brazil)
** TC 209 Cleanrooms and as-sociated controlled environments
Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification
Singapore (Singapore)
** TC 260 Human resource management
3rd Quarter 2016
Seoul (Korea, Republic of)
** TC 92/SC 1 Fire safety/Fire initia-tion and growth
October 2016
2-7 Seattle (USA) * TC 184/SC 4 Automation systems and integration/Indus-trial data
2-7 Auckland (New Zealand)
* TC 204 Intelligent transport systems
4-7 London (United Kingdom)
* TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids
5-6 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
5-7 Madrid (Spain) * TC 225 Market, opinion and social research
6 Virtual (Unknown)
* President's committee
President's committee
6 (Unknown) ** TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
6-7 Berlin (Germany) ** TC 119 Powder metallurgy
10-13 (Romania) ** TC 172/SC 1 Optics and photon-ics/Fundamental standards
10-14 Hoffman Estates, Illinois (USA)
* TC 58/SC 2 Gas cylinders/Cylin-der fittings
10-14 Tokyo (Japan) ** TC 153 Valves
12-13 Hangzhou (China)
* TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
14 Hangzhou (China)
* TC 70 Internal combustion engines
17-21 Berlin (Germany) ** JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
17-21 (China) ** TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints
17-21 (China) ** TC 5/SC 10 Ferrous metal pipes and metallic fittings/Metallic flanges and their joints
17-21 Moscow (Rus-sian Federation)
* TC 20 Aircraft and space vehicles
17-21 London (United Kingdom)
* TC 58/SC 3 Gas cylinders/Cylin-der design
17-21 Kyoto (Japan) * TC 138 Plastics pipes, fittings and valves for the transport of fluids
17-21 Berlin (Germany) * TC 181 Safety of toys
19-21 Philadelphia (USA)
** TC 202 Microbeam analysis
20-21 Tokyo (Japan) ** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete
20-21 London (United Kingdom)
* TC 58 Gas cylinders
20-21 Vienna (Austria) * TC 227 Springs
21 (China) ** TC 5 Ferrous metal pipes and metallic fittings
22-23 Orlando (USA) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
24 Tokyo (Japan) * TC 79/SC 9 Light metals and their alloys/Symbolization
24-26 Tokyo (Japan) ** TC 79/SC 11 Light metals and their alloys/Titanium
24-28 Tokyo (Japan) ** TC 79 Light metals and their alloys
24-28 Tokyo (Japan) ** TC 164 Mechanical testing of metals
24-28 Sydney (Australia)
* TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
24-28 (New Caledonia) ** TC 190/SC 4 Soil quality/Biological methods
24-28 Athens (Greece) * TC 258 Project, programme and portfolio management
25 Tokyo (Japan) * TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots
25 Tokyo (Japan) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys
26-27 Osaka (Japan) * TC 126 Tobacco and tobacco products
26-28 (United Kingdom)
** TC 123 Plain bearings
26-28 Tokyo (Japan) * TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
27 Tokyo (Japan) * TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
27-28 Orlando (USA) ** TC 17/SC 12 Steel/Continuous mill flat rolled products
Berlin (Germany) ** TC 59 Buildings and civil engineering works
Berlin (Germany) ** TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works
London (United Kingdom)
** TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters
24 ISO Update, Supplement to ISO Focus -- March 2016
(Korea, Repub-lic of)
** TC 201 Surface chemical analysis
Tel Aviv (Israel) ** TC 282 Water reuse
Tel Aviv (Israel) ** TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems
October-November 2016
30-4 Langkawi (Malaysia)
** TC 45 Rubber and rubber products
31-4 Seoul (Korea, Republic of)
* TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
November 2016
1-4 Troy (USA) ** TC 22/SC 36 Road vehicles/Safety and impact testing
7-8 Seoul (Korea, Republic of)
* TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
7-8 London (United Kingdom)
* TC 241 Road traffic safety management systems
7-11 Sydney (Australia)
* TC 98 Bases for design of structures
7-12 Lillehammer (Norway)
** JTC 1 Information technology
8-10 Kobe (Japan) * TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
10-11 Bern (Switzerland)
* TC 34/SC 12 Food products/Sen-sory analysis
13-17 (Norway) ** TC 215 Health informatics
14-18 Toronto (Canada) * TC 44 Welding and allied processes
16 Toronto (Canada) * TC 46/SC 9 Information and documentation/Identification and description
17-18 Orlando (USA) * TC 299 Robots and robotic devices
24-25 London (United Kingdom)
* TC 281 Fine Bubble Technology
Christchurch (New Zealand)
** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
(China) ** TC 134 Fertilizers and soil conditioners
December 2016
5-9 Sydney (Australia)
* TC 217 Cosmetics
8-9 Petten (Netherlands)
TC 197 Hydrogen technologies
9 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
4th Quarter 2016
(India) ** TC 113 Hydrometry
2nd Semester 2016
(Europe) ** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims
(Europe) ** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims
(Europe) ** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims
Florence (Italy) ** TC 160 Glass in building
Florence (Italy) ** TC 160/SC 1 Glass in build-ing/Product considerations
Florence (Italy) ** TC 160/SC 2 Glass in building/Use considerations
Month unknown 2016
(Korea, Repub-lic of)
** JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage
(Sweden) ** TC 102 Iron ore and direct reduced iron
(Japan) ** TC 183 Copper, lead, zinc and nickel ores and concentrates
January 2017
16-20 Tokyo (Japan) ** TC 107 Metallic and other inorganic coatings
February 2017
6-12 (South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
March 2017
6 Kyoto (Japan) ** TC 60 Gears
16-17 Geneva (Switzerland)
** COUNCIL Council
April 2017
10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding
(Unknown) ** TC 34/SC 15 Food products/Coffee
(China) ** TC 215 Health informatics
May 2017
15-19 Washington, D.C (USA)
* TC 4 Rolling bearings
(Sweden) ** TC 29 Small tools
(Unknown) ** TC 226 Materials for the production of primary aluminium
June 2017
(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(USA) ** TC 42 Photography
2nd Quarter 2017
(North America) ** TC 31 Tyres, rims and valves
(North America) ** TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims
(North America) ** TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
Tsukuba (Japan) ** TC 92 Fire safety
July 2017
ISO Update, Supplement to ISO Focus -- March 2016 25
(Unknown) ** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
August 2017
31 Raleigh (USA) * TC 38/SC 23 Textiles/Fibres and yarns
Raleigh (USA) ** TC 38 Textiles
September 2017
18 Berlin (Germany) * COUNCIL Council
20-22 Berlin (Germany) ** GA General Assembly
25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings
(China) ** JTC 1/SC 2 Information technol-ogy/Coded character sets
London (United Kingdom)
** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
Vienna (Austria) ** TC 165 Timber structures
New Delhi (India) ** TC 178 Lifts, escalators and moving walks
(Japan) ** TC 213 Dimensional and geometrical product specifications and verification
(Nigeria) ** TC 260 Human resource management
3rd Quarter 2017
Vienna (Austria) ** TC 289 Brand evaluation
October 2017
2-7 Vladivostok (Russian Federation)
* JTC 1 Information technology
22-27 Hawaii (USA) * TC 45 Rubber and rubber products
November 2017
(India) ** TC 54 Essential oils
London (United Kingdom)
** TC 215 Health informatics
Month unknown 2017
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Erlangen (Germany)
** TC 36 Cinematography
(South Africa) ** TC 46 Information and documentation
(South Africa) ** TC 46/SC 11 Information and doc-umentation/Archives/records management
(United Kingdom)
** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
Seoul (Korea, Republic of)
** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
(USA) ** TC 198 Sterilization of health care products
Milan (Italy) ** TC 206 Fine ceramics
February 2018
12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
June 2018
(Korea, Repub-lic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
September 2018
(Japan) ** TC 61 Plastics
3rd Quarter 2018
(Netherlands) ** TC 92 Fire safety
October 2018
(Malaysia) ** TC 215 Health informatics
Month unknown 2018
(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
(China) ** TC 45 Rubber and rubber products
(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
Milan (Italy) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
Month unknown 2019
(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Month unknown 2020
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation