Nott Company - Rubber Fabrication Division has over

sixty years of experience matching the best material for our

customers’ application requirements. We manufacture

gaskets, seals, insulators, and cushions made of, or utilizing

rubber, foam, textiles, coated fabrics, plastics, films, EMI/RFI

shielding, and high performance tapes, as well as molded

and extruded parts. Whether it is simple part or a complex

composite, our knowledgeable team will collaborate with you

in material selection, design, prototyping, and manufacture

parts that meet your exacting requirements.

The following is a representative sampling of the materials

we offer. For a more complete listing, please go to our

website, www.nottco.com/rubberfab.

GENERALMATERIALS

OPEN AND CLOSED CELL FOAM materials listed below are used in varied applications from cushions to isolators to forgiving flanges, dependent upon the environment and compression requirements.

Silicone Neoprene EPDM Nitrile White FDA

SBR Natural Fluorosilicone Polyurethane (either or ester based)

EVA Polyethylene PVC Viton

SOLID RUBBER products have a wide range in physical and chemical properties, enabling them to be used in many differing OEM, maintenance, and sanitary applications.

Silicone Neoprene EPDM Nitrile White FDA

SBR Gum Viton Fluorosilicone Hypalon

P R O D U C T S O L U T I O N S

ISO 9001:2008 Registered

Established in 1879, experts in manufacturing custom flexible products for OEM’s, used in gasketing, sealing,

insulating, and cushioning applications.

Corporate Headquarters4480 Round Lake Road WestArden Hills, MN 55112-1961

Princeton Manufacturing1614 10th Street SouthPrinceton, MN 55371

Burnsville Manufacturing3100 West Park DriveBurnsville, MN 55306 www.nottco.com/rubberfab | 866-762-3387

Rubber Fabrication Divisionlocal: 651-415-3506 fax: 651-415-3589 email: nottrf@nottco.com

RUBBER FABRICATION DIVISION©2009 Nott Company Inc. 08/09 Printed in U.S.A.

TEXTILES are used in a wide variety of ways for protection, sound absorption and decoration. Some examples of the materials used are:

Felts Fabrics Carpeting

PLASTICS AND FILMS are used for electrical insulation, thermal and surface protection, and for reducing surface friction. The following materials have a wide range of chemical and performance characteristics:

PTFE Polyethylene Polyimide Polyester Urethane

Polypropylene Polycarbonate Nylon Acrylic Aramid fiber

HIGH PERFORMANCE TAPES are used for sealing, protection, insulation, and conductivity, involving heat and/or electricity. The following substrate materials are used with silicone, acrylic, or rubber based adhesives:

PTFE Polyimide UHMW PTFE coated fiberglass Polyester Foil

THERMAL MANAGEMENT MATERIALS Materials provide an effective thermally-conductive interface between heat sinks and electrical devices, also providing the dielectric strength where needed to insure durability. Examples of thermal management materials are:

Thermal fabrics Gap fillers Thermal tapes Phase change materials

PTFE coated Fiberglass PTFE Silicone rubber Organic rubber coatings

EMI/RFI SHIELDING products are used to provide electrical conductivity across a gasket flange interface. The types of shielding available are:

EC102 Conductive sheet Wire/Rubber composites Foil laminates

MOLDED AND EXTRUDED parts, customized to your requirements, are available in either solid or cellular form. Among the materials available are:

Silicone Neoprene EPDM Nitrile White FDA SBR

Natural Rubber Viton Fluorosilicone Hypalon Butyl

COATED FABRICS are used to add dimensional stability and for increased tensile strength. The following materials are used with a wide variety of fiberglass and other woven fabric materials: