ird programming...
TRANSCRIPT
Highlights
• Input & Output Connections
• Tuning Information
• Front Panel Configuration
• Authorization
• Arris
Satellite: Galaxy 13 C-Band @ 127°
West Longitude.
Polarization: Horizontal LNB signal
. DVB-S2 Modulation:
BPSK . Sym Rate: 17.5 Msps, FEC: 5/6
Transponder: 18 L-Band Frequency: 1097.50 MHz
VCT:758
Virtual Channels Service Name
100 AWE TV SD MPEG2 480i
200 AWE TV HD MPEG 2 1080i
300
400
500
Test Signal HD MPEG4 1080i
AWE TV International HD MPEG4 1080i
One America News HD MPEG4 1080i
One America News SD MPEG2 480i600
• Once 758 has been entered for VCT, press the � button to the "7Channel" field
and press ENTER.
The cursor will blink on the � T symbols.
• Use the � T buttons, to reveal prograinmirig. Select the channel for which you will be
authorized.
Virtual Channel Number: Service Name
100
200
300
400
500
AWETV SD
AWETV HD
Test Pattern
AWE TV International HD
One America News HD
One America News SD
Step 3: Have Your Unit Authorized By Herring Networks, Inc.
·Herring Networks, Inc. Master Control·1 (858) 483-3460
Have your unit addresses ready.
The "AUTHORIZED" LED will illuminate, once the authorization is complete.
DSR-4440 analog "VIDEO" ports provide a simple way to confirm full activation, along
with an initial look at the basic quality of the decoded video. The rear-panel VIDEO
outputs are compatible with typical Standard Definition/NTSC commercial video
monitors and consumer television sets/displays that have a composite video/RCA video
input.
Page I 5
600
TROUBLESHOOTING
If you experienced an issue with the authorization of your IRDs, please see below.
During the migration an uplink command transmitted by Herring Networks, Inc. may have not beenreceived by all IRDs and the VCT information within your Motorola IRD may be incorrect. The consequence of this error is your IRD may need to be 'retuned' to the Herring Networks, Inc. satellitecarrier. The fix is simple. On DSR 4440, 4460 and 4410MD Units:
Choose Installation option from Main Menu
Choose Modulation menu
Choose L-Band (current value should be 1099)
Select L-Band, set to value to something other than 1099 or 1097.5 (1199 works well)
Select L-Band again, choose 1097.5
Put the cursor in the upper left corner of the menu and scroll down to the modulation page
Select mode DVB-S2 and Symbol rate 17.500
This should return the Signal Light to the IRD. Return to the IRD main menu. Choose Channel option from Main Menu Choose VCT 758 Choose Channel number 200.
At this point, the IRD will re-acquire AWE TV HD. Confirm on downstream equipment.
Herring Networks, Inc. Contacts:
Byron Reagles, Uplink Engineer, [email protected]
Aaron Cornils, Transport Engineer, [email protected]
Nini Dotti, Affiliate Relations Coordinator, [email protected]
General Business Phone: 858-270-6900
Master Control Emergency 24/7 Line: 858-483-3460