i.p.s. gasketed gravity drainage fittings
TRANSCRIPT
I.P.S. Gasketed Gravity Drainage Fittings4” – 8” Fittings (Molded or assembled from molded components)
Distinctive Blue Locking Collar and Gasket for easy identification•Inspected in accordance with ASTM-2122•Made from PVC material that conforms to ASTM D1784 with a cell •classification of 12454, Type 1, Grade 1Minimum wall thickness meets or exceeds the requirements of ASTM •D-2241 SDR 26 (Class 160) and ASTM D-2665 Schedule 40 DWVThe elastomeric joints conform to the performance requirements of ASTM •D-2241Fittings have been certified as meeting a 160 PSI Pressure Rating in •accordance with Table X1.1 of ASTM D-2241Gasketed joints are listed by NSF as meeting the requirements of ASTM •D-3212 in straight alignment, angular deflection and top load deflection for joint tightness at 200 PSI and vacuum at 22” mercury
10” – 24” Fittings (Fabricated)Produced from SDR 26 (Class 160) pipe which meets or exceeds all of the •specifications of ASTM D-2241Produced from pipe made from material that conforms to ASTM D1784 with •a cell classification of 12454, Type 1, Grade 1Fittings inspected in accordance with ASTM D-2122•Gasketed joints conform to ASTM D3139 and are formed using gaskets •which meet all of the requirements of ASTM D-477
TSeries
To place your Order call 1-800-232-5690 today!
Form #0395 Rev. 1/09
USeries USeries TSeries
Features• DesignedtoMakeInstallation
of the System Quicker, Easier and Less Costly.
• DistinctiveBlueRingsandGaskets for Easy Field Identification.
Plastic Trends is one of the only manufacturers to supply Gasketed I.P.S. Drainage (Class 160) fittings from internally molded components. Plastic Trends Gasketed IPS Drainage fittings are made to accept ASTM 2241 Class 160 pipe or ASTM 2665 DWV pipe.
ApplicationsGasketed IPS Drainage Fittings are intended for gravity drainage of sewage and surface water where I.P.S. pipe is specified.
N.S.F. PENDING
TeeGxGxG
Sanitary TeeGxGxG
Combo Wye & 1/8 Bend GxGxG
Wye GxGxG
Double Wye GxGxGxG
1/4 Bend GxG
1/4 Bend Long GxG
1/4 Bend Long GxS
1/8 Bend GxG
1/8 Bend GxS
1/16 Bend GxG
1/16 Bend GxS
Concentric Increaser Coupling GxG
Stop Coupling GxG
Cap G
Concentric Increaser Bushing SxG
2-Way Cleanout GxGxG
Configurations Available:
Short Form Specifications
Molded Gasketed IPS Drainage Fittings (4”- 8”)4” through 8” Gasketed IPS Drainage fittings shall be injection molded or shall be assembled from injection molded components. The body component fitting shall be manufactured in accordance with ASTM D2665, F2135, and CSA B181.2, as applicable. Fitting gaskets shall comply with ASTM F913, and shall be locked firmly in position to prevent displacement. Fittings shall have a blue color-coded gasket and gasket retaining ring for easy identification. Gasket joints shall comply with ASTM D3212 Internal Pressure Test (exfiltration) and Vacuum Test (infiltration) at 5 degrees of gasket joint deflection.
I.P.S. GasketedGravity DrainageFittings
TSeries
For list prices and dimensional drawings, visit www.plastictrends.com
Plastic Trends, Inc.56400 Mound Road
Shelby Twp., MI 48316586.781.2700•800.232.5690
Fax: 586.781.0888www.plastictrends.com
TSeries