i.p.r.s limited

58
I.P.R.S LIMITED I.P.R.S LIMITED CLADDING REPAIR AND CLADDING REPAIR AND COATING SYSTEM COATING SYSTEM SPECIALISTS SPECIALISTS

Upload: josef

Post on 23-Feb-2016

61 views

Category:

Documents


0 download

DESCRIPTION

I.P.R.S LIMITED. CLADDING REPAIR AND COATING SYSTEM SPECIALISTS. ABOUT IPRS. PROVEN TRACK RECORD WITH 10 YEARS SERVICE HISTORY IN THE PRE-FINISHED STEEL, COIL & POWDER COATED REPAIR MARKET SECTOR. OVER 20 YEARS OF EXPERIENCE FROM ON-SITE PERSONNEL. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: I.P.R.S LIMITED

I.P.R.S LIMITEDI.P.R.S LIMITEDCLADDING REPAIR AND CLADDING REPAIR AND

COATING SYSTEM COATING SYSTEM SPECIALISTSSPECIALISTS

Page 2: I.P.R.S LIMITED

ABOUT IPRSABOUT IPRS• PROVEN TRACK RECORD WITH 10 YEARS SERVICE HISTORY IN THE PRE-PROVEN TRACK RECORD WITH 10 YEARS SERVICE HISTORY IN THE PRE-

FINISHED STEEL, COIL & POWDER COATED REPAIR MARKET SECTOR.FINISHED STEEL, COIL & POWDER COATED REPAIR MARKET SECTOR.

• OVER 20 YEARS OF EXPERIENCE FROM ON-SITE PERSONNEL.OVER 20 YEARS OF EXPERIENCE FROM ON-SITE PERSONNEL.

• APPROVED BY HOUSEHOLED NAMES SUCH ARCELOR, KINGSPAN, AKZO NOBEL, APPROVED BY HOUSEHOLED NAMES SUCH ARCELOR, KINGSPAN, AKZO NOBEL, TEGRAL, EUROBOND, EUROCLAD AND MANY MORE.TEGRAL, EUROBOND, EUROCLAD AND MANY MORE.

• OFFER BACK TO BACK WARRANTIES WITH MANUFACTUERES.OFFER BACK TO BACK WARRANTIES WITH MANUFACTUERES.

• OFFER COST EFFECTIVE COATING SOLUTIONS FOR ALL ASPECTS OF OFFER COST EFFECTIVE COATING SOLUTIONS FOR ALL ASPECTS OF APPLICATIONS.APPLICATIONS.

• PROVIDE UP TO DATE RESEARCH & DEVELOPMENT ON ALL NEW COATING PROVIDE UP TO DATE RESEARCH & DEVELOPMENT ON ALL NEW COATING SYSTEMS & APPLICATIONS.SYSTEMS & APPLICATIONS.

• PROVIDE TECHNICAL BACK UP FROM COATING MANUFACTURERS, EXPERIENCED PROVIDE TECHNICAL BACK UP FROM COATING MANUFACTURERS, EXPERIENCED ON / OFF SITE PERSONNEL, INDEPENDENT COATING INSPECTORS.ON / OFF SITE PERSONNEL, INDEPENDENT COATING INSPECTORS.

Page 3: I.P.R.S LIMITED

SERVICES PROVIDEDSERVICES PROVIDED• Specialists in the Repair and re-spray of Coil Coated & Pre-Finished Steel coating Specialists in the Repair and re-spray of Coil Coated & Pre-Finished Steel coating

systems such as PVF2 / PVDF / Plastisol / Polyester / Polyurethane and other systems such as PVF2 / PVDF / Plastisol / Polyester / Polyurethane and other systems upon request.systems upon request.

• Specialists in the Repair and re-spray of Powder coating systems to Curtain Specialists in the Repair and re-spray of Powder coating systems to Curtain Walling, Cladding, flashings, Roofs, Doors and all associated items on any building.Walling, Cladding, flashings, Roofs, Doors and all associated items on any building.

• Repair and re-spray systems to food safe and clean-room cladding in high risk Repair and re-spray systems to food safe and clean-room cladding in high risk environments including cold stores / refrigerators.environments including cold stores / refrigerators.

• Cut edge corrosion treatment & protection using Seamsil products approved by Cut edge corrosion treatment & protection using Seamsil products approved by Kingspan and Corus to gutter edges, roof sheet overlaps and gutter systems.Kingspan and Corus to gutter edges, roof sheet overlaps and gutter systems.

• Corporate colour changes & Re-Branding of Metal / Aluminium shop fronts, Corporate colour changes & Re-Branding of Metal / Aluminium shop fronts, windows, cladding etc.windows, cladding etc.

• Application of Poly-roof Cold Liquid applied coating systems to Asbestos, Bitumen, Application of Poly-roof Cold Liquid applied coating systems to Asbestos, Bitumen, Cladding, Concrete, Felt etc. roofing materials and offering 10 to 25 years insured Cladding, Concrete, Felt etc. roofing materials and offering 10 to 25 years insured back guarantees.back guarantees.

Page 4: I.P.R.S LIMITED

SERVICES CONT’D…….SERVICES CONT’D…….• Blasting / alternate removal options and application of industrial coatings.Blasting / alternate removal options and application of industrial coatings.

• Coating repair and re-spraying of Sectional Overhead Doors.Coating repair and re-spraying of Sectional Overhead Doors.

• Repair and re-spray of Staircases, Entrances, Balustrades etc.Repair and re-spray of Staircases, Entrances, Balustrades etc.

• In-situ refurbishment to lift doors, frames, and carriages.In-situ refurbishment to lift doors, frames, and carriages.

• Application of anti-graffiti coatings.Application of anti-graffiti coatings.

• Application of thermal coatingsApplication of thermal coatings

• On site galvanic protection / upgrade using Zinga. On site galvanic protection / upgrade using Zinga.

• Distribution and application of antibacterial and antimicrobial coating systems.Distribution and application of antibacterial and antimicrobial coating systems.

• Application of epoxy resin and antibacterial floor coating systems.Application of epoxy resin and antibacterial floor coating systems.

Page 5: I.P.R.S LIMITED

MARKET SECTORMARKET SECTOR• PHARMACEUTICALPHARMACEUTICAL• AGRI FOODSAGRI FOODS• COMMERCIAL COMMERCIAL • INDUSTRIALINDUSTRIAL• MOTOR INDUSTRY MOTOR INDUSTRY • IT & COMMUNICATIONSIT & COMMUNICATIONS• INFRASTRUCTUREINFRASTRUCTURE• PETROCHEMICALPETROCHEMICAL• SPORTS & LEISURESPORTS & LEISURE• AND MANY MORE…………AND MANY MORE…………

Page 6: I.P.R.S LIMITED

PHARMACEUTICAL SECTORPHARMACEUTICAL SECTORPharmaceutical facilities have to meet strict requirements, regarding maintenance of Pharmaceutical facilities have to meet strict requirements, regarding maintenance of

cladding panels cladding panels and doors in a clean-room environment. However, even the best maintained site can and doors in a clean-room environment. However, even the best maintained site can

suffer cladding suffer cladding panel damage, caused by personnel working in a specific area or the constant moving panel damage, caused by personnel working in a specific area or the constant moving

and relocation and relocation of plant and machinery.of plant and machinery.

With the current unstable world economy Pharmaceutical facilities are constantly With the current unstable world economy Pharmaceutical facilities are constantly monitoring and monitoring and

reviewing their maintenance budgets with a view to meeting strict auditing requirements reviewing their maintenance budgets with a view to meeting strict auditing requirements and and

guidelines from their customers.guidelines from their customers.

The magnitude of the impact of micro-organisms is recently recognised by the World The magnitude of the impact of micro-organisms is recently recognised by the World Health & Safety Health & Safety

Organization. Organization.

The awareness of the health risks of bacteria such as E.Coli, Salmonella etc. is high and The awareness of the health risks of bacteria such as E.Coli, Salmonella etc. is high and IPRS's IPRS's

contribution & dedication by providing coating repair solutions to minimise such risks is contribution & dedication by providing coating repair solutions to minimise such risks is strongly strongly

connected to our attention for health improvement and welfare.connected to our attention for health improvement and welfare.

Page 7: I.P.R.S LIMITED

PHARMACEUTICAL SECTORPHARMACEUTICAL SECTORClean-rooms consist of specialised materials, chemicals, equipment and Clean-rooms consist of specialised materials, chemicals, equipment and

protocols unique protocols unique to each facility. As the front-line defence in protecting the customer’s to each facility. As the front-line defence in protecting the customer’s

investment, this investment, this requires:requires:

• All IPRS staff to be fully trained in the entry and exit procedures in a live All IPRS staff to be fully trained in the entry and exit procedures in a live environment.environment.

• All equipment used by IPRS personnel to be application-specific.All equipment used by IPRS personnel to be application-specific.• A well-designed cleaning methodology, a verification programme and a commitment A well-designed cleaning methodology, a verification programme and a commitment

to ensure that clean-room maintenance demands are met.to ensure that clean-room maintenance demands are met.• The exclusion of any material, substance, particle, chemical or other undesirable The exclusion of any material, substance, particle, chemical or other undesirable

substance that can taint, pollute, defile, make impure or unclean, or adversely affect substance that can taint, pollute, defile, make impure or unclean, or adversely affect the process or product.the process or product.

• The highest priority from IPRS staff when working in a live clean-room environment.The highest priority from IPRS staff when working in a live clean-room environment.• Contamination can take many forms. For this reason, IPRS has a full-time research Contamination can take many forms. For this reason, IPRS has a full-time research

department working in conjunction with its suppliers to minimise the chances of department working in conjunction with its suppliers to minimise the chances of contamination from its products being introduced into the clean-room environment.contamination from its products being introduced into the clean-room environment.

Page 8: I.P.R.S LIMITED

PHARMACEUTICAL SECTORPHARMACEUTICAL SECTORIPRS designs, procures, supplies and installs special coating programmes specifically IPRS designs, procures, supplies and installs special coating programmes specifically tailored to individual clients requirements in controlled environments taking into tailored to individual clients requirements in controlled environments taking into

account account the following criteria: the following criteria: 

• Provision of VOC compliance and legislation.Provision of VOC compliance and legislation.• Prevention of odour while working under live production conditions through choice of water-Prevention of odour while working under live production conditions through choice of water-

based products and procedures i.e. working behind tented screens using roll / spray based products and procedures i.e. working behind tented screens using roll / spray application techniques to achieve high standard of finish required.application techniques to achieve high standard of finish required.

• Provision of an easy-clean surface with high scratch resistance and covers defects. Provision of an easy-clean surface with high scratch resistance and covers defects. • Provision of good wash resistance with a long life expectancy and a product that can be Provision of good wash resistance with a long life expectancy and a product that can be

cleaned with high pressure.cleaned with high pressure.• Provision of chemical resistance against cleaners, disinfectants or sterilising agents based on Provision of chemical resistance against cleaners, disinfectants or sterilising agents based on

the client's cleaning methodology.the client's cleaning methodology.• Provision of an elastic product for good impact resistance.Provision of an elastic product for good impact resistance.• Provision of certification and approved products.Provision of certification and approved products.• Provision of products to prevent growth of fungi and bacteria.Provision of products to prevent growth of fungi and bacteria.• Extensive Research and development of new spraying techniques, applications (over 13 Extensive Research and development of new spraying techniques, applications (over 13

various methods) and equipment.various methods) and equipment.• Extensive Research and development on new containment booths and protection systems.Extensive Research and development on new containment booths and protection systems.• Extensive Research and development on new filtration systems.Extensive Research and development on new filtration systems.

The availability of a quick and cost-effective back-up solution to The availability of a quick and cost-effective back-up solution to replacement is replacement is

critical in preventing costly downtime & disturbance.critical in preventing costly downtime & disturbance.

Page 9: I.P.R.S LIMITED

AGRI FOODS SECTORAGRI FOODS SECTORIPRS Limited carry out repairs, remove and re-new coating systems to external cladding, IPRS Limited carry out repairs, remove and re-new coating systems to external cladding, steelwork and internal Food safe, Coldstore, Refrigerator cladding surfaces in all sectors steelwork and internal Food safe, Coldstore, Refrigerator cladding surfaces in all sectors of the food Processing and Manufacturing Industry over the past ten years.of the food Processing and Manufacturing Industry over the past ten years.

The company carries out the following in-situ repairs to all coated / un-coated The company carries out the following in-situ repairs to all coated / un-coated metal substrates and applies coating systems to damage areas to avoid metal substrates and applies coating systems to damage areas to avoid creating a habitat that could support a bacteria, mould and algae spore outbreak:creating a habitat that could support a bacteria, mould and algae spore outbreak:

  • Indentations to wall / ceiling cladding, doors & flashings.Indentations to wall / ceiling cladding, doors & flashings.• Perforations to wall / ceiling cladding, doors & flashings.Perforations to wall / ceiling cladding, doors & flashings.• Refurbishment & rejuvenation of existing aged coated surfaces.Refurbishment & rejuvenation of existing aged coated surfaces.• Stripping existing defective coatings & re-applying new client specific tailored Stripping existing defective coatings & re-applying new client specific tailored

system.system.• Application of Inducoat Waterbase Anti-Bacterial and Anti-Microbial coatings systems Application of Inducoat Waterbase Anti-Bacterial and Anti-Microbial coatings systems

to walls & floors. to walls & floors.

Note:Note: The use of roll and spray application allows work to be carried out in a The use of roll and spray application allows work to be carried out in a shutdown or live environment thus preventing costly downtime.shutdown or live environment thus preventing costly downtime.

Page 10: I.P.R.S LIMITED

TYPICAL TYPES OF INTERNAL CLADDING DAMAGETYPICAL TYPES OF INTERNAL CLADDING DAMAGE

Typical Indentations Screw holes – Removal of Socket

Perforations

Start of De-lamination around damage not repaired

Coating starting to blister and de-laminate

Complete coating breakdown and de-lamination

Page 11: I.P.R.S LIMITED

Example of Food Safe Cladding Before remedial Example of Food Safe Cladding Before remedial works.works.

Page 12: I.P.R.S LIMITED

Example of Food Safe Cladding During remedial Example of Food Safe Cladding During remedial worksworks..

Page 13: I.P.R.S LIMITED

Example of Food Safe Cladding After remedial Example of Food Safe Cladding After remedial works with Inducoat Flexcoat Anti-bacterial / Anti-works with Inducoat Flexcoat Anti-bacterial / Anti-Microbial coating system.Microbial coating system.

Page 14: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALServices Provided:Services Provided:

• Internal & External Cladding repairs to all types pre-finished and coil coated Internal & External Cladding repairs to all types pre-finished and coil coated materials / coatings.materials / coatings.

• Internal & External Wall & Roof Cladding stripping and re-coating.Internal & External Wall & Roof Cladding stripping and re-coating.

• Cold Liquid Applied Waterproof coatings to existing Metal Clad / Concrete / Cold Liquid Applied Waterproof coatings to existing Metal Clad / Concrete / Asphalt / Bitumen / Asbestos / Trocal etc. roofing systems.Asphalt / Bitumen / Asbestos / Trocal etc. roofing systems.

• Internal & External Curtain Walling / Windows / Doors coating refurbishment Internal & External Curtain Walling / Windows / Doors coating refurbishment works to all types of substrates such as PVC, Aluminium, Anodising, Powder works to all types of substrates such as PVC, Aluminium, Anodising, Powder Coating etc.Coating etc.

• Corporate Colour & Logo Re-Branding.Corporate Colour & Logo Re-Branding.

• Cut edge corrosion / Gutter Re-Lining / Roof Light Refurbishment Works.Cut edge corrosion / Gutter Re-Lining / Roof Light Refurbishment Works.

• IPRS will carry out full building envelope surveys and technical consultancy.IPRS will carry out full building envelope surveys and technical consultancy.

Page 15: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALAdvantages For Refurbishment Works:Advantages For Refurbishment Works:

• Future Protection of Building Envelope.Future Protection of Building Envelope.

• Extension of Life to First maintenance with backed up Warranties.Extension of Life to First maintenance with backed up Warranties.

• Prevention of costly replacement and disturbance to existing business.Prevention of costly replacement and disturbance to existing business.

• Added Value for Re-Sale or Letting by enhancing the Aesthetical Added Value for Re-Sale or Letting by enhancing the Aesthetical appearance of the property.appearance of the property.

• Refurbished property in established commercial or industrial environment Refurbished property in established commercial or industrial environment rather than in a new less established development.rather than in a new less established development.

• IPRS Limited offers a total building envelope solution.IPRS Limited offers a total building envelope solution.

Page 16: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALCladding RepaintingCladding Repainting

The performance of cladding coating systems are generally defined by the Minimum The performance of cladding coating systems are generally defined by the Minimum Period to Re-Paint Decision. This is the length of time before a building owner needs Period to Re-Paint Decision. This is the length of time before a building owner needs

to to consider will the cladding require re-painting.consider will the cladding require re-painting.

Cladding coating systems are manufacturerd with extremely high performance Cladding coating systems are manufacturerd with extremely high performance expectations. All products used for exterior applications are designed to withstand expectations. All products used for exterior applications are designed to withstand

the the environment but can degrade over time by means of the following main factors:environment but can degrade over time by means of the following main factors:

• SunlightSunlight• Chemicals & pollutantsChemicals & pollutants• Water, oxygen and salts.Water, oxygen and salts.• Wind-blown sand and saltsWind-blown sand and salts

Page 17: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALThey can deteriorate and become defective as a result of additional external They can deteriorate and become defective as a result of additional external

forces such forces such as:as:

• Age of coating system.Age of coating system.• Coating damage during installationCoating damage during installation• Coastal Locations.Coastal Locations.• Urban Locations.Urban Locations.• Industrial Pollution.Industrial Pollution.• Environmental Pollution.Environmental Pollution.• Climatic Changes.Climatic Changes.• Maintenance over the lifetime of the system.Maintenance over the lifetime of the system.

When the barrier properties of such coatings breakdown it can lead to corrosion of When the barrier properties of such coatings breakdown it can lead to corrosion of the the

under lying substrate. Unfortunately, corrosion rate data cannot be generalised under lying substrate. Unfortunately, corrosion rate data cannot be generalised due to due to

the variations in atmospheric environments.the variations in atmospheric environments.

Page 18: I.P.R.S LIMITED

Typical Plastisol Coating adhesion failure Typical Plastisol Coating adhesion failure

Typical Coating adhesion failure on external Typical Coating adhesion failure on external claddingcladding

Typical PVDF Coating adhesion failureTypical PVDF Coating adhesion failure

Page 19: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALOver-paint solutions are available, designed and tailored by IPRS Limited to suit each Over-paint solutions are available, designed and tailored by IPRS Limited to suit each client’s requirements for aged cladding systems. The correct choice of a coating system client’s requirements for aged cladding systems. The correct choice of a coating system can restore their appearance and significantly extend the building life.can restore their appearance and significantly extend the building life.

IPRS Limited has gained vast experience over the past ten years in the refurbishment IPRS Limited has gained vast experience over the past ten years in the refurbishment and restoration of buildings and improving their performance, specification and and restoration of buildings and improving their performance, specification and aesthetics.aesthetics.

We can offer our Clients and building owners a stress free refurbishment solution in We can offer our Clients and building owners a stress free refurbishment solution in preventing considerable disruption to production and the workplace. The business preventing considerable disruption to production and the workplace. The business operation can continue within the confines of the building during the over-coating operation can continue within the confines of the building during the over-coating operation. IPRS Limited develop a good understanding with all our clients of the operation. IPRS Limited develop a good understanding with all our clients of the

potential potential problems but with detailed planning and choice of materials to suit each specific problems but with detailed planning and choice of materials to suit each specific environment requirement all difficulties can be overcome.environment requirement all difficulties can be overcome.

IPRS Limited will also evaluate and assess costs, durability of new coating system, IPRS Limited will also evaluate and assess costs, durability of new coating system, guarantee and each building owners tailored needs.guarantee and each building owners tailored needs.

Page 20: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALThe quality of an over-coating solution and its longevity is influenced by the way in The quality of an over-coating solution and its longevity is influenced by the way in

which which it is installed. IPRS Limited workmanship, quality and adherence to manufacturer’s it is installed. IPRS Limited workmanship, quality and adherence to manufacturer’s guidelines is clearly defined by our approval of household names like such as Kingspan guidelines is clearly defined by our approval of household names like such as Kingspan Ltd., Spanwall Ltd., Corus Ltd., Arcelor Mittal, Joriside etc.Ltd., Spanwall Ltd., Corus Ltd., Arcelor Mittal, Joriside etc.

The main types of over-painting solutions are:The main types of over-painting solutions are:

• Painting over existing coated surfaces with minimal damage to the existing exterior Painting over existing coated surfaces with minimal damage to the existing exterior surface, which may require a major upgrade or change of colour.surface, which may require a major upgrade or change of colour.

• Painting over existing coated surfaces with degree of adhesion failure and evidence Painting over existing coated surfaces with degree of adhesion failure and evidence of corrosion, which may require a major upgrade, change of colour or extension on of corrosion, which may require a major upgrade, change of colour or extension on the lifetime for the cladding system.the lifetime for the cladding system.

• Stripping & painting previously coated surfaces, which require a major upgrade to Stripping & painting previously coated surfaces, which require a major upgrade to extend the lifetime of the cladding system.extend the lifetime of the cladding system.

We offer stripping techniques such as paint remover, slurry blasting, sand blasting, We offer stripping techniques such as paint remover, slurry blasting, sand blasting, hydro hydro

blasting etc. in considering our client’s requirements and environmental impact.blasting etc. in considering our client’s requirements and environmental impact.

Page 21: I.P.R.S LIMITED

Aged Cladding with Defective Coating Aged Cladding with Defective Coating stripped and over-coated at Bausch Lomb, stripped and over-coated at Bausch Lomb, Waterford.Waterford.

Page 22: I.P.R.S LIMITED

Aged Cladding with Defective Coating Aged Cladding with Defective Coating stripped and over-coated at Bausch Lomb, stripped and over-coated at Bausch Lomb, Waterford.Waterford.

Page 23: I.P.R.S LIMITED

Aged Cladding with Defective Coating Aged Cladding with Defective Coating stripped and over-coated at Bausch Lomb, stripped and over-coated at Bausch Lomb, Waterford.Waterford.

Page 24: I.P.R.S LIMITED

Roof refurbishment - Water jetting with Roof refurbishment - Water jetting with protective net to collect the paint flakes.protective net to collect the paint flakes.

Page 25: I.P.R.S LIMITED

Warehouse Cladding Refurbishment – Warehouse Cladding Refurbishment – Steelseal Coating System with 10 Year Steelseal Coating System with 10 Year Warranty.Warranty.

Elevation Before refurbishment

Elevation After Refurbishment

Page 26: I.P.R.S LIMITED

Warehouse Cladding Refurbishment – Warehouse Cladding Refurbishment – Steelseal Coating System with 10 Year Steelseal Coating System with 10 Year Warranty.Warranty.

Elevation Before refurbishment

Elevation After refurbishment

Page 27: I.P.R.S LIMITED

Warehouse Cladding Refurbishment – Warehouse Cladding Refurbishment – Steelseal Coating System with 10 Year Steelseal Coating System with 10 Year Warranty.Warranty.

Page 28: I.P.R.S LIMITED

Warehouse Cladding Refurbishment – Warehouse Cladding Refurbishment – Steelseal Coating System with 10 Year Steelseal Coating System with 10 Year Warranty.Warranty.

Page 29: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALRoof Refurbishment / Gutter Repair & LiningRoof Refurbishment / Gutter Repair & Lining

““IPRS Limited is the sole Republic of Ireland distributor and GE Qualified IPRS Limited is the sole Republic of Ireland distributor and GE Qualified Applicator for the GE Silicones Protective Coatings Programme co-ordinator Applicator for the GE Silicones Protective Coatings Programme co-ordinator and Seamsil system manufacturer Delvemade Limited in accordance with and Seamsil system manufacturer Delvemade Limited in accordance with Application training provided by Giromax Technology Limited for Application training provided by Giromax Technology Limited for Cut Edge Cut Edge Corrosion repair technology Corrosion repair technology ”.”.

It is our responsibility to distribute, control and apply all GE Silicone Protective Coatings It is our responsibility to distribute, control and apply all GE Silicone Protective Coatings to ensure correct technical and aesthetic product application under the strict to ensure correct technical and aesthetic product application under the strict guidelines/training provided by Giromax Technology Ltd.guidelines/training provided by Giromax Technology Ltd.

In progress technical assessments are undertaken to ensure that each project proceeds In progress technical assessments are undertaken to ensure that each project proceeds in accordance with the agreed specification. Typical monitoring includes Surface in accordance with the agreed specification. Typical monitoring includes Surface Preparation, Application Standards, Thickness & Adhesion Tests.Preparation, Application Standards, Thickness & Adhesion Tests. Coris Refurbishment Solutions - Platinum Supply Chain PartnerCoris Refurbishment Solutions - Platinum Supply Chain Partner

Page 30: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALGiromax Technology is the Platinum Supply Chain Partner for all repaint Giromax Technology is the Platinum Supply Chain Partner for all repaint projects with the projects with the Platinum Partnership System Warranty aPlatinum Partnership System Warranty administered by dministered by Corus Refurbishment Solutions.Corus Refurbishment Solutions.

Cut Edge Corrosion occurs at the cut edges and overlapped joints on roof cladding sheets. Cut Edge Corrosion occurs at the cut edges and overlapped joints on roof cladding sheets. Where the cut edges of coated metal cladding are exposed to the elements for prolonged Where the cut edges of coated metal cladding are exposed to the elements for prolonged periods of time, de-lamination may occur in the form of peel back of the factory coating. The periods of time, de-lamination may occur in the form of peel back of the factory coating. The unprotected metal substrate then becomes exposed to rusting and corrosion.unprotected metal substrate then becomes exposed to rusting and corrosion.

If the Cut Edge Corrosion is not addressed quickly it will damage the metal sheeting and If the Cut Edge Corrosion is not addressed quickly it will damage the metal sheeting and adversely affect the roof. Cut Edge Corrosion is a progressive problem and if neglected it can adversely affect the roof. Cut Edge Corrosion is a progressive problem and if neglected it can develop away from the cut edge, and destroy the weather seal at joint overlaps and the develop away from the cut edge, and destroy the weather seal at joint overlaps and the gutter overhang at eaves.gutter overhang at eaves. The general condition of the roof will deteriorate rapidly and this will have a negative impact The general condition of the roof will deteriorate rapidly and this will have a negative impact on the building value, ongoing maintenance and possible roof replacement costs. on the building value, ongoing maintenance and possible roof replacement costs.

Page 31: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIAL

The GE Silicone Protective Coatings Programme provided by IPRS Ltd. is as The GE Silicone Protective Coatings Programme provided by IPRS Ltd. is as follows :follows :

Simple - Seamsil -Metal edge, Gutter Systems, Defective Joints Treatment & Simple - Seamsil -Metal edge, Gutter Systems, Defective Joints Treatment & Protection.Protection. Its built in simplicity makes SEAMSIL ® a most cost effective and reliable cure for Its built in simplicity makes SEAMSIL ® a most cost effective and reliable cure for

edge edge and overlap corrosion problems.and overlap corrosion problems.

Colours - SEAMSIL edge and overlap protection stem is available in a range of colours Colours - SEAMSIL edge and overlap protection stem is available in a range of colours to to

match the most popular shades used in industrial claddings. SEAMSIL has good match the most popular shades used in industrial claddings. SEAMSIL has good elastic elastic

and flexibility properties to withstand normal surface movements. This ensures and flexibility properties to withstand normal surface movements. This ensures continued continued

optimum performance even in the most aggressive environments.optimum performance even in the most aggressive environments.

Page 32: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALSimple - Seamsil -Metal edge, Gutter Simple - Seamsil -Metal edge, Gutter Systems, Defective Joints treatment Systems, Defective Joints treatment

& & Protection.Protection. Its built in simplicity makes SEAMSIL ® a Its built in simplicity makes SEAMSIL ® a most cost effective and reliable cure for most cost effective and reliable cure for edge and overlap corrosion problems.edge and overlap corrosion problems.

Colours - SEAMSIL edge and overlap Colours - SEAMSIL edge and overlap protection stem is available in a range of protection stem is available in a range of colours to match the most popular shades colours to match the most popular shades used in industrial claddings. SEAMSIL has used in industrial claddings. SEAMSIL has good elastic and flexibility properties to good elastic and flexibility properties to withstand normal surface movements. withstand normal surface movements. This ensures continued optimum This ensures continued optimum performance even in the most aggressive performance even in the most aggressive environments.environments.

Page 33: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALNatural - G.E. Delcote Natural - G.E. Delcote Architectural CoatingArchitectural Coating

Inorganic Silicone Technology Inorganic Silicone Technology ensures that the G.E. Delcote ensures that the G.E. Delcote Architectural coating remains Architectural coating remains naturally unaffected by UV or naturally unaffected by UV or extremes of weather and extremes of weather and temperature. Silicone coatings are temperature. Silicone coatings are

non-non-sacrificial and naturally halt the sacrificial and naturally halt the

process process of corrosion. No corrosion inhibitors or of corrosion. No corrosion inhibitors or primers are required.primers are required.

Used in conjunction with Seamsil, its Used in conjunction with Seamsil, its fast fast

application minimises site disruption.application minimises site disruption.

Page 34: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALProtective - Delglaze Weatherproof Protective - Delglaze Weatherproof CoatingCoating

Delglaze is a high performance, high build, Delglaze is a high performance, high build, single component moisture curing aliphatic single component moisture curing aliphatic polyurethane coating that cures to provide polyurethane coating that cures to provide a clear, tough membrane principally for a clear, tough membrane principally for the re coating and sealing of aged and the re coating and sealing of aged and weathered grp roof lights. Once clean of weathered grp roof lights. Once clean of moss and lichen, Delglaze seals in the moss and lichen, Delglaze seals in the exposed fibres, remaining flexible enough exposed fibres, remaining flexible enough to accommodate roof light movement.to accommodate roof light movement.

Fully cured Delglaze provides a tough clear Fully cured Delglaze provides a tough clear elastomeric coating with crack bridging elastomeric coating with crack bridging capabilities that is particularly effective on capabilities that is particularly effective on difficult to replace roof lights on an difficult to replace roof lights on an asbestos cement roof.asbestos cement roof.

Page 35: I.P.R.S LIMITED

Examples of Cut edge CorrosionExamples of Cut edge Corrosion

Start of cut edge corrosion @ 50mm

Start of cut edge corrosion @ 75mm

Start of cut edge corrosion @ 100mm

Corroded metal 50-75mm on top sheet only

Metal corroded on top & bottom sheet

Cut edge corrosion at maximum limit

Page 36: I.P.R.S LIMITED

Examples of Cut edge CorrosionExamples of Cut edge Corrosion

Metal corroded thru. Top & bottom sheeting

Fibre, debris, moisture has created a poultice under the roof lap ends

Metal corroded thru’ from underside

Metal corroded thru’ from underside of sheeting approx. 4-6” up from joint

Metal Corroded thru’ past first fixing Roof requires replacement –

Structurally un-sound

Page 37: I.P.R.S LIMITED

Examples of Cut edge Corrosion Examples of Cut edge Corrosion Treatment WorksTreatment Works

Pre-treatment of joint Example of joint encapsulated

Example of joint encapsulated

Example of joint treatment with patch to bottom sheet

Example of joint treatment complete Example of joint complete

Page 38: I.P.R.S LIMITED

Examples of Cut edge Corrosion Examples of Cut edge Corrosion Treatment WorksTreatment Works

Example of joint complete Joint complete at Roof Light Joint complete at Roof Light

Gutter Edge treatment Gutter Edge treatment Roof light refurbished

Page 39: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALArchitectural Cladding Repairs Architectural Cladding Repairs 

I.P.R.S Limited repair, re-spray and maintain all types of new / aged architectural I.P.R.S Limited repair, re-spray and maintain all types of new / aged architectural cladding panels. The types of profiles repaired range across a wide spectrum cladding panels. The types of profiles repaired range across a wide spectrum

from micro from micro rib to flat panels, using the latest in professional coating system technologies. rib to flat panels, using the latest in professional coating system technologies. 

"With the current unstable world economy, companies are constantly "With the current unstable world economy, companies are constantly monitoring and reviewing their maintenance budgets. The availability monitoring and reviewing their maintenance budgets. The availability

of a of a quick, guaranteed and cost-effective back-up solution to replacing quick, guaranteed and cost-effective back-up solution to replacing critical in preventing costly downtime and replacement costs.critical in preventing costly downtime and replacement costs.

We can guarantee paint adhesion & colour match to suit each client's tailored We can guarantee paint adhesion & colour match to suit each client's tailored needs and needs and

offer a back to back guarantee with the manufacturer of the cladding system.offer a back to back guarantee with the manufacturer of the cladding system.

The quality of our cladding repair solutions is clearly defined by our approval of The quality of our cladding repair solutions is clearly defined by our approval of household manufacturer names such as Kingspan, Tegral, AME, Euroclad, household manufacturer names such as Kingspan, Tegral, AME, Euroclad,

PAROC etc. PAROC etc.

Page 40: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIAL

Micro-Ribbed Cladding Before Repair Micro-Ribbed Cladding After Repair

Flat Profiled Cladding Before Repair Flat Profiled Cladding After Repair

Page 41: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALCurtain Walling (Windows / doors) refurbishmentCurtain Walling (Windows / doors) refurbishment

I.P.R.S. Limited carry out repairs and apply individual / site specific coating systems required in-situ on site I.P.R.S. Limited carry out repairs and apply individual / site specific coating systems required in-situ on site or at our spray facility off site to damaged Curtain Walling. All curtain walling surfaces should be protected or at our spray facility off site to damaged Curtain Walling. All curtain walling surfaces should be protected from abrasion, scuffing and other damage during transportation and installation.from abrasion, scuffing and other damage during transportation and installation.

Many facade materials including curtain walling have to be finished or coated to protect them from the Many facade materials including curtain walling have to be finished or coated to protect them from the environment and give the required appearance. The quality of the finish may be the greatest factor environment and give the required appearance. The quality of the finish may be the greatest factor affecting the useful life of the wall and when damaged is likely to be a contentious issue if the appearance affecting the useful life of the wall and when damaged is likely to be a contentious issue if the appearance is not acceptable to the client.is not acceptable to the client.

• When scratched or damaged the metal may rot, corrode and suffer other forms of degradation in the When scratched or damaged the metal may rot, corrode and suffer other forms of degradation in the presence of moisture, U.V., salt laden air and air borne pollutants. presence of moisture, U.V., salt laden air and air borne pollutants. 

• Mortar drops and similar alkaline materials can be particularly damaging to coatings and paint finishes Mortar drops and similar alkaline materials can be particularly damaging to coatings and paint finishes during the construction of any project.during the construction of any project.

• Repairs to curtain walling coated surfaces can be carried out to the highest of standards by our Repairs to curtain walling coated surfaces can be carried out to the highest of standards by our experienced trained specialist staff and prevent a replacement process, which can delay programmes and experienced trained specialist staff and prevent a replacement process, which can delay programmes and incur un-necessary costs.  incur un-necessary costs. 

The service provided to maintain all types of curtain walling coating systems including powder coating, The service provided to maintain all types of curtain walling coating systems including powder coating, using the latest in professional coating systems, enables I.P.R.S to guarantee 100% paint adhesion, colour using the latest in professional coating systems, enables I.P.R.S to guarantee 100% paint adhesion, colour matching and offer back to back guarantees with the Manufacturer. matching and offer back to back guarantees with the Manufacturer.

Page 42: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIAL

Typical Damage to Curtain Walling – Scratches / Scuff marks

Typical Damage – Deep Scratches

Preparation & masking of Curtain Walling

Damaged transom repaired & resprayed

Page 43: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALCold Liquid Applied Waterproof coatings to existing Metal Clad /Cold Liquid Applied Waterproof coatings to existing Metal Clad /Concrete / Asphalt / Bitumen / Asbestos / Trocal etc. roofing systems.Concrete / Asphalt / Bitumen / Asbestos / Trocal etc. roofing systems.

““IPRS Limited is an approved Qualified Applicator for POLYROOF IPRS Limited is an approved Qualified Applicator for POLYROOF protective coatings. It is our responsibility to control, ensure correct protective coatings. It is our responsibility to control, ensure correct technical and aesthetic product application in accordance with the technical and aesthetic product application in accordance with the strict guidelines / training provided by POLYROOF” strict guidelines / training provided by POLYROOF”

Overlay systems such as Polyroof offer an alternative to the complete Overlay systems such as Polyroof offer an alternative to the complete replacement of existing flat roofs. The principal advantage of this is to replacement of existing flat roofs. The principal advantage of this is to minimise disruption and, in the majority of cases, keep the building fully minimise disruption and, in the majority of cases, keep the building fully operational during the refurbishment.operational during the refurbishment.

An overlay system is usually considered when the existing roof covering is showing early An overlay system is usually considered when the existing roof covering is showing early signs signs

of breakdown. This, for example, could be a felt roof where bubbles or blisters are starting of breakdown. This, for example, could be a felt roof where bubbles or blisters are starting to to

appear, or a single ply or gutter installation where seams or joints are beginning to fail. appear, or a single ply or gutter installation where seams or joints are beginning to fail.

Page 44: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALKey Characteristics of Polyroof Liquid Applied Waterproofing Key Characteristics of Polyroof Liquid Applied Waterproofing

SystemsSystems

• Seamless Cold applied membraneSeamless Cold applied membrane -- Eliminates fire hazards / inconvenience of using Eliminates fire hazards / inconvenience of using hot applied systems.hot applied systems.

• Complete composite roofing solutionComplete composite roofing solution -- For all types of Warm or Cold roof specifications For all types of Warm or Cold roof specifications such as Asbestos, Bitumen, Concrete, Felt, Trocal such as Asbestos, Bitumen, Concrete, Felt, Trocal etc.etc.

• Applied to existing substrate Applied to existing substrate -- Roofs can be safely refurbished without risk or Roofs can be safely refurbished without risk or refurbishment or disruption.refurbishment or disruption.

• Waterproof Waterproof  -- Prevents water from entering the structurePrevents water from entering the structure

• Joint FreeJoint Free -- Encapsulates the roof with a complete seamless coating, Encapsulates the roof with a complete seamless coating, which eliminates the risk of which eliminates the risk of leakages.leakages.

• High elasticityHigh elasticity -- Withstands regular foot traffic and roof movements Withstands regular foot traffic and roof movements without splitting or shearing.without splitting or shearing.

• High film strengthHigh film strength -- Impact resistant & vandal resistant with tough, durable Impact resistant & vandal resistant with tough, durable long-lasting membranes.long-lasting membranes.

• UV StableUV Stable -- Enables the systems to resist all types of weather Enables the systems to resist all types of weather conditions.conditions.

30 year durability rated by the BBA30 year durability rated by the BBA  with a10-25 year insurance backed guaranteewith a10-25 year insurance backed guarantee  

Page 45: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALRecommended Uses for New & ExistingRecommended Uses for New & Existing

Direct overlap application to:Direct overlap application to:1. 1. Flat & Low Pitched Roof ApplicationsFlat & Low Pitched Roof Applications2. 2. AsphaltAsphalt3. 3. Built-up Felt (Existing)Built-up Felt (Existing)4.4. Single Ply PVC MembranesSingle Ply PVC Membranes5. 5. Lead SheetingLead Sheeting6. 6. Coated roofsCoated roofs7. 7. Solar reflectiveSolar reflective8. 8. Liquid applied polyurethanes and GRPLiquid applied polyurethanes and GRP9. 9. Gutter refurbishmentGutter refurbishment10. 10. Galvanised Metal GuttersGalvanised Metal Gutters11. 11. Concrete GuttersConcrete Gutters12. 12. Asbestos Gutters Asbestos Gutters

Page 46: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIAL

Typical Detail using Elastex system

Page 47: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIAL

Typical Thermal Up Grade Detail

Page 48: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIAL

Page 49: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALBLASTING, ACCESS, CONTAINMENT / ENCAPSULATION & PAINTINGBLASTING, ACCESS, CONTAINMENT / ENCAPSULATION & PAINTING

IPRS provide coating refurbishment solutions for Bridges and other waterway IPRS provide coating refurbishment solutions for Bridges and other waterway structures, structures,

marine environment, tank farms, petrochemical plants, wind farms, railway marine environment, tank farms, petrochemical plants, wind farms, railway infrastructure, infrastructure,

offshore facilities and many more activities available through extensive research & offshore facilities and many more activities available through extensive research & development. development.

Page 50: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALSubstrates:Substrates:

• Ferrous materials i.e. non-magnetic coatings on magnetic substrates such as plastic, galvanising, Ferrous materials i.e. non-magnetic coatings on magnetic substrates such as plastic, galvanising, enamel, powder paint, chrome and other coatings.enamel, powder paint, chrome and other coatings.

• Non-Ferrous materials i.e. non-magnetic coatings on non-magnetic substrates such as anodising, Non-Ferrous materials i.e. non-magnetic coatings on non-magnetic substrates such as anodising, plastic coatings, powder paint, aluminium, brass, stainless steel etc.plastic coatings, powder paint, aluminium, brass, stainless steel etc.

• Concrete, brickwork & Plasterwork.Concrete, brickwork & Plasterwork.• All types of metalwork & steelwork.All types of metalwork & steelwork.

Blasting & Preparation ServicesBlasting & Preparation Services

IPRS provide a variety of Blast cleaning and preparation services, which are effective for removing IPRS provide a variety of Blast cleaning and preparation services, which are effective for removing defective coatings and a variety of surface contaminants or defects.  defective coatings and a variety of surface contaminants or defects. 

Preparation Systems:Preparation Systems:

• Conventional Abrasive Blasting.Conventional Abrasive Blasting.• Vacum Blasting.Vacum Blasting.• High pressure water cleaning.High pressure water cleaning.• Ultra high pressure water cleaning.Ultra high pressure water cleaning.• Slurry blasting.Slurry blasting.• Dry Ice blasting.Dry Ice blasting.

Page 51: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALCoating ServicesCoating Services

• Internal & External Cladding Coating systems.Internal & External Cladding Coating systems.• Clean Room Coating Systems.Clean Room Coating Systems.• Food Industry Coating Systems.Food Industry Coating Systems.• Tank Lining Coating Systems.Tank Lining Coating Systems.• Intumescent Coating SystemsIntumescent Coating Systems• FireproofingFireproofing• Concrete protectionConcrete protection• Brickwork & Blockwork protection.Brickwork & Blockwork protection.• Containment and secondary containment coatingContainment and secondary containment coating• Chemical resistant, non-slip floor coating applicationsChemical resistant, non-slip floor coating applications• General Maintenance Painting.General Maintenance Painting.• Increase design life of pre-formed galvanised purlins and structural portal framework.Increase design life of pre-formed galvanised purlins and structural portal framework.

Access, Containment, Encapsulation & ProtectionAccess, Containment, Encapsulation & Protection

• MEWP and all types of specialised scaffolding access.MEWP and all types of specialised scaffolding access.• Abseil access.Abseil access.• Asbestos roof specialised access systems.Asbestos roof specialised access systems.• Temporary fall arrest systems.Temporary fall arrest systems.• Encapsulation systems.Encapsulation systems.• Specialised dust / fume extraction and containment systems.Specialised dust / fume extraction and containment systems.• Temporary air tight protection screens.Temporary air tight protection screens.

Page 52: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALTechnical & Quality Control SupportTechnical & Quality Control Support

• Coatings surveys and technical analysis.Coatings surveys and technical analysis.• Coatings specification research & development.Coatings specification research & development.• Environmental research & development.Environmental research & development.• Health & Safety and hazard documentation.Health & Safety and hazard documentation.• Testing requirements and standards.Testing requirements and standards.• Project description and requirements.Project description and requirements.

Health & Safety & EnvironmentalHealth & Safety & Environmental

• Approved training courses and certificates.Approved training courses and certificates.• Development of method statements.Development of method statements.• Provision of site specific risk assessments.Provision of site specific risk assessments.• Provision of safety plans.Provision of safety plans.• MSDS & COSSH sheets for proposed materials.MSDS & COSSH sheets for proposed materials.• Safety site audits.Safety site audits.• Safety inspections & tool box talks by qualified personnel.Safety inspections & tool box talks by qualified personnel.

The highest health and safety standards are maintained on all IPRS managed projects.The highest health and safety standards are maintained on all IPRS managed projects.

Page 53: I.P.R.S LIMITED

INDUSTRIAL & COMMERCIALINDUSTRIAL & COMMERCIALProject managementProject management

IPRS will provide and ensure the reliable availability of all planning data, specifications, IPRS will provide and ensure the reliable availability of all planning data, specifications, testing and testing and

client reports by means of the following:client reports by means of the following:

• Pre-Award Meeting.Pre-Award Meeting.• Kick-off Meeting.Kick-off Meeting.• Site Establishment Meeting.Site Establishment Meeting.• Performance Meetings.Performance Meetings.• Progress Meeting.Progress Meeting.• Close out Meeting.Close out Meeting.

We will provide cost effective design solutions to meet the technical requirements of a We will provide cost effective design solutions to meet the technical requirements of a wide range of wide range of

projects in all sectors. projects in all sectors.

Page 54: I.P.R.S LIMITED

Upgrade of new glavanised purlins, multi-beams, rails and Upgrade of new glavanised purlins, multi-beams, rails and ancillaries, using Zinga on-site Galvanic protection coating ancillaries, using Zinga on-site Galvanic protection coating system to achieve a 30 year design life in a Bio-Composite C5 system to achieve a 30 year design life in a Bio-Composite C5 corrosive environment facility.corrosive environment facility.

New Galvanised Purlins Prior to Blasting

Purlins in on-site temporary blasting tunnel

Purlins Coated with New 30 year design life Zinga Specification

Upgraded purlins in-stalled for supporting roof panels

Page 55: I.P.R.S LIMITED

MOTOR SECTORMOTOR SECTORFacade & Corporate Colour Refurbishment - Corporate Colour Facade & Corporate Colour Refurbishment - Corporate Colour / Logo re-branding./ Logo re-branding.

  The Façade refurbishment & corporate in-situ colour service provided by IPRS Limited is one that covers The Façade refurbishment & corporate in-situ colour service provided by IPRS Limited is one that covers all types of buildings and business across every sector from retail to the motor industry. The service will all types of buildings and business across every sector from retail to the motor industry. The service will meet the demand of any client bringing you from the design stage of the project to completion.meet the demand of any client bringing you from the design stage of the project to completion.

We can offer our Clients a stress free refurbishment solution in preventing considerable disruption to We can offer our Clients a stress free refurbishment solution in preventing considerable disruption to production and the workplace. IPRS Limited develop a good understanding with all our clients of the production and the workplace. IPRS Limited develop a good understanding with all our clients of the potential problems but with detailed planning and choice of materials to suit each specific environment potential problems but with detailed planning and choice of materials to suit each specific environment requirement all difficulties can be overcome.requirement all difficulties can be overcome.

IPRS Limited will also evaluate and assess costs, durability of new coating system, guarantee and each IPRS Limited will also evaluate and assess costs, durability of new coating system, guarantee and each building owners tailored needs.building owners tailored needs.

The quality of an over-coating solution and its longevity is influenced by the way in which it is installed. The quality of an over-coating solution and its longevity is influenced by the way in which it is installed. IPRS Limited workmanship, quality and adherence to manufacturer’s guidelines is clearly defined by our IPRS Limited workmanship, quality and adherence to manufacturer’s guidelines is clearly defined by our approval of household names such as Peugeot Ireland, Mc Donalds Ireland, Tesco, Lidl, Aldi and many approval of household names such as Peugeot Ireland, Mc Donalds Ireland, Tesco, Lidl, Aldi and many more references, which can be obtained from our Head Office.more references, which can be obtained from our Head Office.

By refurbishing your existing building you will give it a new life,image and re-sale value.By refurbishing your existing building you will give it a new life,image and re-sale value.

Page 56: I.P.R.S LIMITED

Corporate Re-Branding of Tom Kilroy Peugeot Garage in Corporate Re-Branding of Tom Kilroy Peugeot Garage in Limerick to New Toyota DealershipLimerick to New Toyota Dealership

North elevation with Peugeot colours prior to re-branding

Page 57: I.P.R.S LIMITED

Corporate Re-Branding of Tom Kilroy Peugeot Garage in Corporate Re-Branding of Tom Kilroy Peugeot Garage in Limerick to New Toyota DealershipLimerick to New Toyota Dealership

North elevation with New Toyota colours during re-North elevation with New Toyota colours during re-brandingbranding

Page 58: I.P.R.S LIMITED

Corporate Re-Branding of Tom Kilroy Peugeot Garage in Corporate Re-Branding of Tom Kilroy Peugeot Garage in Limerick to New Toyota DealershipLimerick to New Toyota Dealership

North elevation complete with New Toyota colours