1

TECHNICAL DATA E DP-P DP-D

Sweeping widths:

with 2 side brushes mm. 1460 1460 1460

with 1 side brush mm. 1130 1130 1130

with main brush only mm. 800 800 800

Waste hopper volume l. 150 150 150

Filter surface sqm 6 6 6

Maximum climbing grade % 20 20 20

Maximum speed km/h 7 7 7

Power supply 24 V Petrol-24V Diesel-24V2,6 kW 4,9 kW 5 kW

Empty weight kg 465 512 540

Length mm. 1600 1600 1600

Width mm. 1080 1080 1080

Hieght mm. 1280 1280 1280

1404 Ride-on sweepers

2

Huge hopper capacity

Great productivity (1)Great productivity (1)

6 square meter filtering surface with correct dust and air passage space between each element.

Over-throw sweeping concept allows to load completely the 150 litre hopper volume

80 cm maim brush plus two side brush for a sweeping width of 1,5 metres

Large sweeping path

Extensive filter surface

Extensive running time

Battery version can contain 4 x 6V - 240 Ah for over 3,5h run time

Dual Power version has over 7,5 hour run time (5 litre tank) in engine mode before refill is necessary.

1404

3

NDC (No Dirt in Curve) Automatic brush movement whilst turning

PatentedTRADITIONAL SYSTEM

- Whilst curving the side brush moves inwards

automatically

- The system avoids uncollected debris whilst turning

- Debris uncollected whilst turning

Great productivity (2)Great productivity (2)1404

4

High performance (1)High performance (1)

SLS (Self Levelling System) automatic brush pressure control

System that adapts immediately the brush thanks to a special shock absorber.The actuator moves only in case brush adapting requirements are higher.

The system allows the brush:- to immediately and constantly follow all types of surfaces- to self adjust brush pressure until the brush is completely worn out- No need to check brush wear as brush replacement is indicated automatically on control panel display

Main brush special “V” shape design

Assures debris collection to the centre of the hopper and avoids leaving dirt lines on the side of the machine

Special moulded rubber flap with pines help dirt be collected towards the sides of the brush compartment in presence of big quantities of debris.

Patented

1404

5

Dust flap for large debris collection

Easily operated by pressing lever on left hand side

Dust micro filtration

Filter with incorporated rubber gasket for maximum control of dust

Adjustable side brush rpm

Adjustment from 20 to 100 rpm. Assures best sweeping and dust containing results what ever the debris to collect.

High performance (2)High performance (2)1404

6

Pre-programmed working settings

3 independent programs allow best settings for all types of applications. Filter shaker can be operated at any time

Each Program can be fully personalized in:

- Main brush pressure

The system works by reading the amp draw of the brushes and the pressure is adjusted by an actuator on the brush head. An IPC patent that consists in a spring between the actuator and the brush deck allows immediate brush pressure adjustment without having the actuator being powered constantly.Example: P1 P2 P3 MAXDisplay nr. 20 40 70 100Amp 14-15 16-17 19-20 22Brush mark 1 cm 1,7 cm 2 cm 2,2 cm

Note: Brush mark is the contact width of the brush on the ground surface. This is the best way to measure brush pressure.

- Speed (0-7Km/h)

- Automatic filter shaker (on or off)

The automatic filter shaking (cleaning) program can be adjusted from intervals that go from every 1 minute up to every 9 minutes working time.

- Traction stop when filter is shaken (on or off)

It is also possible to program the machine traction stop when the filter is automatically being cleaned. Once the filter has been cleaned the traction mode re-starts.

- Automatic main brush lift in reverse gear (on or off)

Avoids recycling dirt in working mode when the machine is being reversed.

- Functions stop automatically if pedal released (on or off)

High performance (3)High performance (3)1404

7

Ergonomics, user friendly (1)Ergonomics, user friendly (1)

Just choose Program 1,2 or 3

Easy to use control panel

Side brush levers Engine starting on DP version

Great manoeuvrability thanks to an optimum weight distribution

Designed to assure minimum noise levels

Easy to steer thanks to the design of the engine and battery compartments

Battery version Dual Power version

Low noise electrically powered vacuum fan

Battery

BatteriesBatteries

1404

8

Great visibility whilst working

Both side brushes are easily seen whilst working.

Front part of the machine completely open to allow ease in manoeuvrability and great visibility

Designed for maximum comfort

Battery level indicator

The battery is protected as follows:

21,5V = Display indicates battery in reserve and machine can still work

20,5V = Display indicates battery to be charged. All functions stop except traction

18V = Machine stops also traction in order to protect battery

Comfortable seating and ergonomic traction pedal. Operator can step on machine from both sides

Ergonomics, user friendly (2)Ergonomics, user friendly (2)1404

9

Automatic stop (by command release) in working mode

Avoids having to stop and start the machine. All functions stop and start upon traction pedal command.

Main brushSide brushesVacuumTraction

Flashing beacon

Maximum visibility and safety

Maximum distance from discharge point and operator

Effective discharge system thanks to separate controls for hopper raise and tilting

1

2

Ergonomics, user friendly (3)Ergonomics, user friendly (3)1404

10

Low maintenance costs (1)Low maintenance costs (1)

Main brush replacement without tools

Dust filter replacement without tools

Automatic main brush lift in reverse

System that avoids the main brush re-circulating dirt (dirtying the surface) in reverse gear. System can be programmed on or off.

1404

11

Self cleaning filter system

The vacuum system is divided in 2 separate compartments

Upon the basis of the frequency programmed, one compartment at a time will momentarily stop vacuum and automatically clean one of the two filters whilst the machine continues work by utilising the other vacuum compartment

PATENTEDPATENTED

The automatic filter shaking (cleaning) program can be adjusted from intervals that go from every 1 minute up to every 9 minutes working time.

The filter is shaken 3 times for 5 seconds at intervals of 2 seconds.

The filter can always be shaken (even if set automatically) by the operator at any time

Low maintenance costs (2)Low maintenance costs (2)1404

12

Easy access to motor compartment

Dual Power version

Battery Power version

Easy access to all electrical components

Side and front covers can be easily removed

Low maintenance costs (3)Low maintenance costs (3)1404

13

Robust construction (1)Robust construction (1)

Heavy duty chassis in fully coated steel

Maximum protection against impact

Side brushes retract against impact

Non marking wheels to protect surroundings against impact

Maximum protection against impact all around the machine

1404

14

Panel control switches protected against water and humidity

Resin protect control card

Card filled with resin to prevent vibrations, dust or humidity to get to electronic components

Main brush motor fully protected against dust

Display indicates when engine oil must be changed

ENGINE OIL

Hour counter gives engine run time plus total (engine plus battery) run time.

Robust construction (2)Robust construction (2)1404