ip3.4 whats new

7/29/2019 IP3.4 Whats New

1/42

Interactive Petrophysics

Whats New IP3.4Frank WhiteheadIP Development Manager


2/42

IP3.4 Data Base Structure

Curve Sets can be customizedTop Bottom intervalStepIrregular step allowed

Data loading to set of correct step6 data loaded to 6 set1 data loaded to 1 set0.1 data loaded to 0.1 set (FMI)

Automatic extrapolation between setsAllows mixing of input set in modules

All output curves in a module mustbelong to the same set or set type

Depth curve created for each setCurve names maximum length

increased to 14 characters

Set names maximum length increasedto 8 characters


3/42

Database Security

Each well in the database can have asecurity setting

Security is set by user logon name

Wells can be

Read / Write

Read Only

No access

No access wells just show well nameon load screen and wells can not beloaded

Read only wells load as a well copyand can not overwrite original

Can be saved under a new name

Access rights can be set by project or

by individual wells


4/42

History Module

Stores History on Modules run


5/42

History Module

Stores History on Curves


6/42

History Module

Stores Parameter listings

Makes comparison between listings


7/42

Zone Linking

Zone Sets can be linked so they share the same :Top and Bottom depth

Zone Name and Zone colour

Once linked any operation done on one of the sets in a linked group is done on them allChange zone name

Change depths

Create new zone


8/42

Zone Sets - Enhancements

Copy a parameter set to a tops set

Edit Tops set in a parameter windowAllows editing of Linked sets

Output tops to a listing / clipboard

Launch parameter windows


9/42

Laminated and Shaley Sand Fluid

Substitution

Unocal / Chevron proprietary module now released in IPv3.4

Developed by Chris Skelt - Chevron


10/42

Mineral Solver Enhancements

Ability to solve for the un-invaded zoneFor each input equation one specifies whether the tool reads in the invaded or un-invaded zone,or in-between.


11/42

Mineral Solver Enhancements

Plot OptionsDisplay movable fluids in model result tracks


12/42

Porosity and Water Saturation

Enhancements

Kill analysis logicUsed for special minerals notcovered by Coal, Salt and Badhole logic

Volcanic, Anhydrite etc

Plot OptionsAllow modifications of default plot


13/42


Enhancements

Comparisons can be made between

the different porosity methodsAllows calibration of sonic porosityparameters in good hole for use in badhole zones

Comparisons of different Sw methods

Output effective Sw and also Total Sw

Comparisons are designed for QCpurposes and not for final results

No iterations are made between Phieand Sw. Assumes normal Phie and Swresults for use in the model calculations


14/42


Enhancements

Thomas-Stieber shale distribution calculations

Dispersed, laminar and structural volumesProperties of the sand laminations calculated

Sand Lamination properties

Dispersed ClayLaminated Clay


15/42

Clay Volume and Porosity Water

Saturation Linking

If the Clay Volume and PhiSw module

zone sets are linked we can now link clayparameters

Density, Neutron and Sonic Clay

Change Density clay on a PhiSw XplotChanges Density clay in Clay volume

Re-runs Clay Volume

Runs PhiSw


16/42

Sw Modelling Enhancements - Set-up

and Corrections

QC Pc Height V. Sw plug crossplotsMore selection of default crossplots

Closure Corrections on individual plugs

Plug Phi and Perm now displayed on QC page

Plug line colour now shown on setup window


17/42

Sw Modelling Enhancements Cap

Pressure Functions

Data for a function can be selected by zone

Current function being worked on is now shown inthe setup module for individual plug selection

Weighted Regression for function

Weights the data by 1/Shr. Weights the low Sws

S M d lli E h t L


18/42

Sw Modelling Enhancements Log

Functions

Weighted regression added

FWL and selected wells are saved by function

FWL can be set for all wells from the equation tab

Data for a function can be selected by zone

S M d lli E h t S V


19/42

Sw Modelling Enhancements Sw V.

Height Curves

Options extended to allow Gas over Oil calculations of PcGas/Oil contact is entered plus Gas Density

Pc in the gas zone calculated by adding the Pc in the Oil to the Pc in gas

IFT correction factors can be set for both Oil and Gas

Hence the same function can be used for both fluid

S M d lli E h t G i


20/42

Sw Modelling Enhancements Grain

Size curves

Set-Up module now outputs from Pc curves

Grain size distribution array curves

Sw normalized Pc array curves (for plotting on Log plots)


21/42

Basic Log Functions - Enhancements

Calculation Bulk density from density porosity

Calculation of Permeability using default equations

New conversion tabOil and Gas density

Sigma Oil, Gas and Water

Sigma Cased Hole S


22/42

Sigma Cased Hole Sw -

Enhancements

Sigma matrix can now be optional

entered rather than calculated from RhomatrixNew Output curves

Sigma Open Hole ReconstructedSigma 100% Water apparentSigma 100% Hydrocarbon apparent

Sigma / Phi Xplot with const Sw lines


23/42

Depth Shifting

Depth offset (shift) curve can now be

named per trackAuto Depth Shift

Correlation type can be defined

Distance away from original shift can bedefined to stop new shifts overwriting old

New module to shift curves using

previously generated depth offset curves


24/42

Dip Picking Image logs

Dips can be picked from images

Dip type selected from display window

Display window allows manual dipvalue entry

Interactive editingLeft mouse for editing angle and size

Right mouse for editing depth


25/42

Plotting - Enhancement

Default Plot can be specified for all wells

When a new plot is requested for a well the selected plot format will be used

Customizable Log Plot Headers and


26/42

Customizable Log Plot Headers and

Footers

Log Plot Headers and FootersTotal customization of Headers

Montage builder used to create the header formats

Will link in automatically well and log attributes

Default formats are similar to IP3.3

Attributes are

mapped in the

Montage builder


27/42

Cross Plot - Enhancements

Standalone Pickett Plot


28/42


Multiple sets of discriminators can be setup and used


29/42


Multiple User Lines

Either hand drawn or equationsLine Style editable


30/42


Multiple Regression lines

Line style editable


31/42

Neural Networks

Predict

Core PermeabilityLog Data (Density bad hole)

Facies Logs

Single or Multi-Well

Flexible training zones

Models can be run on multiple wells

Trainingzones

Input

Curves

Result

Comparison

LAS l d


32/42

LAS loader

Loading multiple imbedded LAS 2 files can be handled easier

All LAS sequences now show on input screen

Data Loading LAS 3 format files

API UWI ll id tifi ti


33/42

API or UWI well identification

Select and load well by API or UWI

API or UWI displayed with well name

API UWI ll id tifi ti


34/42

API or UWI well identification

API or UWI displayed on Well map

D t B B


35/42

Data Base Browser

API UWI shown next to well name

List can be selected to displayCurrent well only

Loaded wells only

All Wells

Data listings can be displayedWith quick graphical

representation

Data Well file folders shown

Display Option Icons

M lti ell Batch Operations


36/42

Multi-well Batch Operations

Works with loaded and un-loaded wells in the database

Allows batch operations to be run on more than 500 wells at a time

Wells lists can be used to select wells

API or UWI can be displayed with well name

Fill data gaps added to list of available modules to run

Multi Well Curve Headers


37/42

Multi-Well Curve Headers

Output Well lists from filter results

Module can be used for searching for curves and then saving the wells they are found in. (e.g.find all wells with core data)

Output information on found curves

Printer, File or clipboard

Multi Well set headers


38/42

Multi-Well set headers

Output Well lists from filter results

Multi Well header information


39/42

Multi-Well header information

Now displays location information in UTMs or Lat-Long

Output to file or clipboard

Custom Toolbars and User Menus


40/42

Custom Toolbars and User Menus

User programs can be added to custom toolbars

User custom menus can be made

Well Folder structure


41/42

Well Folder structure

Allows the automatic creation of a folder structure for each well

Work Areas


42/42

Work Areas

Multiple work areas can be created which allows organisation of windows

Work area selected

Quick view of what's in each

work area

ip3.4 whats new

Documents