ip-10 quick startup guide software download.pdf

7/27/2019 IP-10 Quick Startup Guide software Download.pdf

1/10

FibeAir IP-10


2/10

IP-10 Quick Startup Guide Doc Rev0.12

Contents

1. DOCUMENT PURPOSE ....................................................................... ........................................ 3

2. DOCUMENT SCOPE............................................................................. ........................................ 3

3. STARTUP CONFIGURATION STEPS ............................................... ........................................ 3

3.1. LAUNCHING WEB-MANAGEMENT ............................................................... ............................. 3

3.2 IDUSOFTWARE UPGRADE .9


3/10


1. Document Purpose

The purpose of this document is to describe the basic software download steps of IP-10 radio link.

2. Document Scope

This document describes the recommended initial steps in order to connect andmanage IP-10 radio link. It includes the configuration steps of the following mainsections:

Connecting to IDU using default factory setup

Launching the web management

Software Download in IP10 IDU.

3. Startup Configuration Steps

Basic configuration includes the following basic steps:

1. Connect PC to IDU and launch web management.

3.1. Launching Web-Management

IDU factory Default Configuration

IP Address: 192.168.1.1, IP Mask 255.255.255.0.

Active management port: port #7 (far right RJ45 port), out-of band management.


4/10


Connecting to IDU

1. Verify no Ethernet traffic (cables or fibers) connected.

2. Power up IDU.

3. Connect PC to IDU management port (port #7, far right RJ45 port).

4. PC configuration: IP Address: 192.168.1.240, IP Mask 255.255.255.0, no defaultgateway.

5. Verify connectivity to IDU (ping 192.168.1.1). If no connectivity, verify IDU IPmanagement configuration using Command Line Interface.

Launching Web-Management

1. Open Internet Explorer.

2. Type IDU's IP address (192.168.1.1) on address field. IP-10 login screen will be

displayed.

3. User: admin. Password: admin.


5/10


Customers may use Windows FTP-Server or any other FTP-Server freewareavailable.

Installing FTP-Server Software

You may install and use any FTP-Server software for SW download. Ceragonrecommends using FileZilla_Server software that can be downloaded from the web(freeware).

1. Download zipped FileZilla_Server.zip from the internet and store it on the PC (for

example, C:\IP-10).

2. Extract the file and run the installation setup. Follow installation process untilfinished (do not change any of the installation default settings).InitialConfiguration of FTP-Server Software

After installing the FileZilla, it has to be configured to allow the SW download usingFTP.

Stopping Windows FTP services

In order to use FileZilla, Windows default FTP services have to be stopped.

1. Go to Control Panel> Administrative Tools Internet Information Services, ifthe Internal Information Services dont appear its means that the Windows FTPwasnt install and you may have to proceed without doing so.

2. Use Right-Click to stop the Default FTP Site under FTP Sites.


6/10


Configuration of the FTP-Server software

User and files path have to be defined on the FTP-Server.

1. Launch the FileZilla Server Interface (go to Files Programs FileZilla Server FileZilla Server Interface).

2. Click OK on the Connect to Server window. The FileZilla Server window will bedisplayed.

3. Select Edit Users Shared Folders. The Users window will be displayed.


7/10


4. Select Add on the Users section and enter anonymous in the Add user Accountwindow.

5. Select Add on the Shared Folders section and select local drive C:\ in the Browsefor Folder.

6. Select (check) Read, Write and Delete in the Files section.

7. Verify your configuration is identical to the displayed in the following window:


8/10


8. Select OK and close the FileZilla server.

Launching of the FTP-Server software

User and files path have to be defined on the FTP-Server.

1. Launch the FileZilla Server Interface (go to Files Programs FileZilla Server FileZilla Server Interface).

2. Click OK on the Connect to Server window. The FileZilla Server window will bedisplayed.

3. Verify server is running (yellow lightning Bolt on top-left corner highlighted andstatus is Logged On.


9/10


10/10


7. In the Remote Server Parameters enter the remote FTP-Server details as perconfiguration above:

a. Remote SW Update server URL:ftp://xxx.xxx.xxx.xxx/updates/the IPshould be the hosts IP. meaning the Lap Top that the SW is beingdownload from

b. Remote server login: anonymous

c. Remote server password: leave blank

8. Select Download to start the SW downloads. This may take few minutes untilcompleted (this operation will download all files under C:\updates to the IDU butwill not activate them).

9. Select Upgrade to install the newly downloaded files. This may take few minutesuntil completed.

10. Restart the IDU once SW download and upgrade successfully completed.
ftp://xxx.xxx.xxx.xxx/updates/ftp://xxx.xxx.xxx.xxx/updates/ftp://xxx.xxx.xxx.xxx/updates/ftp://xxx.xxx.xxx.xxx/updates/

ip-10 quick startup guide software download.pdf

Documents