iota-vti v3 versus iota-vti and kiwi osd v3.8 walt morgan, larry fleming, terry redding 2015 iota...
DESCRIPTION
Devices The KIWI has an info button on the Back. It used to be called a reset button.TRANSCRIPT
IOTA-VTI v3IOTA-VTI v3versusversus
IOTA-VTI and IOTA-VTI and KIWI OSD v3.8KIWI OSD v3.8
Walt Morgan, Larry Fleming, Terry Redding
2015 IOTA Meeting
ConceptConcept• Newest IOTA-VTI V3• Original IOTA-VTI with first update• KIWI OSD v3.8• Connected together for power• Powered simultaneously• Watch and see what happens• Record event with iPhone 6S• Post to YouTube• Share at 2015 IOTA Meeting, Las Vegas, Nevada
DevicesDevices
The KIWI has an info button on theBack. It used to be called a reset button.
Things observedThings observed• IOTA-VTI v3 personalize? Missing call sign• KIWI must have video input to display time data• IOTA-VTI v3 displayed time immediately• IOTA-VTI v3 had the oldest almanac, 2009• IOTA-VTI original had almanac 2013• IOTA-VTI v3 acquired initial time within 41 seconds• KIWI requires manual reset (info button) to establish
accurate time at 2 minutes 40 seconds• There was a three second difference in time between
the KIWI and the IOTA-VTI v3• It took four minutes eight seconds for the the older
IOTA-VTI to display time
Things observed, cont.Things observed, cont.• There was a three second difference in time
between the KIWI and IOTA-VTI v3• IOTA-VTI updated at five minutes ten seconds and
the two IOTA-VTI agree on time• IOTA-VTI announced the almanac had been
updated and provided instructions on how to adjust any previous times used
• The KIWI three second error displayed would not clear without a physical push of the Info button
• How do you know time has corrected? 7 min 40 sec to achieve time sync
The videoThe video• The video was created and posted to Youtube –
unedited.• As a result of this meeting and comments, the
video will be titled, edited and screen comments added as lessons are learned.
• The link to the raw video is • https://www.youtube.com/watch?v=KyVN-QVOfv0• An editied version of the video will be posted
when it becomes available• You are welcome to submit comments to
QuestionsQuestions• Lessons learned• Power up the IOTA-VTI early - at least 10 minutes• Power up the KIWI early - at least 20 minutes• IOTA-VTI fully automatic to accurate time• KIWI OSD requires manual button press to
establish accurate time stamp• KIWI must have a camera feed to display time• All systems produce an accurate time stamp
when allowed to fully start – give them time