IoT

Smart WiFi LED Bulb

User ManualBNETA InternationalSection 14, Sheldon Place, 5 Lone Close, Lonehill, South Africa, 2191sales@bneta.co.zawww.bneta.co.za

FEATURESApps available for Android and Apple smart phonesRemotely control via phoneNo hubsSet your scheduleDimmable & RGB color light selectableAdjustable color temperatureGroup BulbsSharing feature

IMPORTANTPlease read before using this product

C

M

Y

CM

MY

CY

CMY

K

Download iO.e app from App Store or Google play. Register account on your iO.e app.

Search “iO.e” on App Store or Google play, or scan the barcode on the right to download.Click “Agree” on the Privacy Policy page.

IMPORTANT INFORMATIONRISK OF ELECTRONIC SHOCK OR BURNS - USE IN DRY LOCATION ONLY. Do not use outdoors, with wet hands, or when standing on wet or damp surfaces.NOT FOR USE IN TOTALLY ENCLOSED LUMINAIRES. DO NOT USE WITH DIMMERS. Please make sure voltage of the LED bulb is compatible with the mains electricity of your country before connecting to a bulb holder. Ensure that the base of the bulb matches the bulb holder.

APP DOWNLOAD AND QUICK START GUIDE

Select your country code, enter the cellphone number or email address and the tap “Continue” to get a message containing a verification code.

We’ll send you a verification code. Enter it in the “Verification Code” field, set your password and tap “Login”.

C

M

Y

CM

MY

CY

CMY

K

My Home

Click the pull-down arrow at the top left corner of “My Household” to add a house hold and manage households.

One account can manage multiple households at the same time. The user can operate a device in a household by selecting it in the household menu.

When logged in , click “Add Home” to go to the “Add Household” page. Set a name and enter the address of the Home. Select rooms for the Home. Click “Done” at the top right corner to complete room settings.

Room settings can be changed anytime by clicking on “My Household” as shown in Picture 3.

Picture 1. Picture 2.

Picture 3. Picture 5.Picture 4.

iO.e

APP INSTALLATION

MY HOME

C

M

Y

CM

MY

CY

CMY

K

Step One: Screw in the smart WiFi bulb. Power on. Step Two: Add Device.

Tap “+” or “Add Device” button . The Select Device Type page appears. Click “All”.

Select “Smart Bulb”. Make sure the bulb quickly flashes and then tap “Confirm light rapidly blank”.

If the light is not flashing quickly, turn the bulb off and on for 3 times until it quickly flashes.

Enter Wi-Fi Password and click “Confirm” to connect. The “Adding device succeeded”message appears after you connection completed.

iO.e

ADD DEVICE

C

M

Y

CM

MY

CY

CMY

K

When the current Internet status is unstable, use the AP Mode to connect.

Select Wi-Fi and input the password.

Open the mobile device’s wirelesssettings, connect to the hot spot named “SmartLife-XXXX”.

Turn off-on the light for 3 timesuntil light is slowly flashing. Thentap “Confirm light slowly blink”.

RESET DEVICE

The app page goes through thechanges during the configuration process and then once connected, the “Adding device succeeded” message will be displayed.

C

M

Y

CM

MY

CY

CMY

K

LIGHT ON

After selecting an Bulb Light from the ‘Devices’ screen, the Smart Switch Control Panel screen appears.

CONTROL PANEL: LIGHT ONTap the light image in the middle to switch the light ON or OFF. When the light is switched on, the Control Panel options are displayed. The Schedule option at the bottom allows you to add scheduled timers for turning the light on/off.

CONTROL PANEL: LIGHT OFFTap the light image in the middle to switch the light ON or OFF. When the light switched off, the Control Panel options aredisplayed. The Schedule option at the bottom allows you to add scheduled timers for turning the light on/off.

CONTROL PANEL OPTIONSWhen the Smart Bulb is switched on, the Control Panel options are displayed. The following options appear: Adjust (applied to white, CCT and RGBW model), Colour (applied to RGB and RGBW model); Scene; Schedule.Adjust: Adjust white brightness and/or change color temperature (applied to white, CCT and RGBW model).Colour: Choose colour and edit the brightness and concentration (applied to RGB and RGBW model).Scene: Select a scene and edit by clicking on the pencil icon.Schedule: Adds scheduled timers for turning the bulb on/off.

CONTROL PANEL

LIGHT OFF SCENE

C

M

Y

CM

MY

CY

CMY

K

When click the “…” on the top right, The device modification menu appears.

SHARE DEVICES

GROUP CONTROL

Tap “Share devices” in More page.Tap “Share devices” (Picture 1), tap “Add”.Enter phone number or email of the account, tap “Done”.

To stop sharing with an account previously added, press and hold to delete in Android, or slide to the left to delete in iOS.

Click "Create Group" under "More" on a selected device page.The page displays all devices with the same model number and available to be added as a group. Select a device and click Save, then enter group name and click OK to finish.When a group has been created successfully, the page will be automatically redirected to a group control panel, where grouped devices can be managed.

REMOVE THE SHARED USER

The device modification menu is shown in the picture:Change basic information: You can change the name and location of a device.Share devices: You can share any individual device with others by entering their mobile phone numbers. (Note: Their mobile phone numbers must be registered with GSE Home Control app.) Create group: All the devices have been added and with the smae model number will appear when you click. A group cannot be created for devices with different model numbers.Device information: Check device ID, Wi-Fi signal strength, IP address, Mac address and device time zone.Feedback: You can submit feedback on problems encountered during usage.Check for Firmware update: You can check the firmware version and update.Remove device: Delete a previously added device from the list of devices.Factory reset: Remove devices and clear all data.

DEVICE MODIFICATION MENU

C

M

Y

CM

MY

CY

CMY

K

SMART SCENE - AUTOMATION1. Click Add Smart Device on the "Smart Features" page or "+" at the top right corner and select "Automation" to go to the smart configuration page, as shown in Picture. 8.2. Click "+" as shown in Picture. 8 to add multiple conditions or multiple actions.

ADD CONDITIONClick “+” to add. For example, to add temperature as a condition, select temperature , configure temperature related conditions, and then click "Next" to add the condition.

ADD ACTIONClick "Add action" or "+" at the top right corner to open the menu. There are four action types: scenario, automation, device, and push notification.

Picture 6. Picture 8.Picture 7.

SMART SCENE

C

M

Y

CM

MY

CY

CMY

K

Conditions and actions of automation can all be set up as shown in the picture 9. The system primarily supports three types of automation:

Inter-device synchronization, such as turning on the aroma diffuser and air purifier automatically at the same time the A/C unit is turned on.External environment and device synchronization, such as turning on the heater automatically when the temperature falls below 0°C.Timed actions, such as drawing back the curtains drawn automatically at 8:00 am every morning.

Select a scenario as shown in Picture 7 and go to the configuration page. As shown in Picture 10, you can edit the scene name. Click "Add action" or "+" at the top right corner to add an action.The action menu is shown in Picture 11. Configuration is similar to that of automated devices.

To configure a scene with "Trigger automation", you must set up an automated scene in advance. If existing automation options are available as shown in Picture 9, click “+” button in Picture 10, and select “Choose automation” in Picture 11. Select an existing automation and "Enable after triggering" or "Disable after triggering" appear to be choosen, as shown in Picture 12 .Then, click "Next" and enter scene name, and click "Save" at the top right corner to finish configuration.

Picture 10.

Picture 12.

Picture 9.

Picture 11.

SMART SCENE - SCENE

SMART SCENE

C

M

Y

CM

MY

CY

CMY

K

Picture 13. Picture 14.

Personal Information: Tap the “Tap tp set your name” to edit name, profile photo, change account password, link your mobile number to your account, configure your gesture password, and terminate your account. Tap “Log out” to log out of the app. Upon reentering the iOs app you will need to login again, as shown in Picture 14.Home Management: Household ManagementMessage Center: Displays messages.Scan QR code: Use this function to scan QR codes.FAQ: Displays common questions and answers about the device and app.Feedback: Allows you to submit feedback.Settings: Tap to set the sounds and vibration of your mobile device and to log out of the application.

Click "Gesture Unlock" to set up a gesture password. Once a gesture password is activated, you will have to use the gesture to access the app. If you forgot your gesture password, click "Forgot Gesture Password" to have an authentication code sent to your registered mobile phone number. Enter the code and set up a new gesture password to continue.

WiFi router with 2.4Hz WiFi networks IEEE 802.11 B/G/N.iPhone, ipad (IOS 7.0 or higher) or Android 4.0 orhigher.io.e App available on App Store and Google PlayRemote control with Wi-Fi /3G / 4G.Voice control (works with Amazon Echo and GoogleHome).For Indoors Dry Location Use Only.

PROFILE

“Profile” allows you to manage your personal information.Tap the “Profile” button from the “Devices” screen to open the Profile options. The options include:

GESTURE PASSWORD

SYSTEM REQUIREMENTS

C

M

Y

CM

MY

CY

CMY

K

C

M

Y

CM

MY

CY

CMY

K