ionpure® dc power controllersmembranes.co.kr/pds/pdfs/dc.pdf · 2012. 2. 28. · dc power...
TRANSCRIPT
DC Power Controllers for use withContinuous Electrodeionization Modules
The DC Power Controllers are designed to be
used with the IONPURE® modules and are part of
a complete line of modular system components
offered to system integrators.
DC Power Controllers Featuresn Designed for individual power control for each
modulen Pre-engineered boards reduce system costn Compatible with DSP Display Boardsn Use DC Power Controllers in lieu of rectifiers for
enhanced system controln Reduced spares cost equals less downtime
For additional information on our PowerControllers call 866-876-3340 or visit our website at www.ionpure.com. Information on CEDImodules and our complete line of systemcomponents is also available.
Ionpure® DC Power Controllers
Single Phase Power Controller IP-200 / 400 / 600 VPCB
Three Phase Power Controller IP-600-20-VPCB
Ionpure is a trademark of Siemens its subsidiaries or affiliates.
The information provided in this brochure contains merely generaldescriptions or characteristics of performance which in actual caseof use do not always apply as described or which may change as aresult of further development of the products. An obligation toprovide the respective characteristics shall only exist if expresslyagreed in the terms of contract.
www.siemens.com/ionpure
Siemens
10 Technology DriveLowell, MA 01851Phone: 866.876.3340
© 2010 Siemens Water Technologies Corp.
HPS-C-VPCB.S-DS-0410
Subject to change without prior notice.
Ionpure® DC Power Controllers
Operating EnvironmentInstallation should be indoors with no directsunlight and it should have a maximum ambienttemperature of 122°F (50°C) up to 90% relativehumidity non-condensing
Quality Assurance Standards UL recognized. CE versions are available.* Eachboard is factory tested to meet strict Ionpure andindustry standards.
*Refer to operating manual for details
PHYSICAL SPECIFICATIONS
Item Number Height Width Depth Weight
IP-200VPCB 6.00” (152.4 mm) 6.00” (152.4 mm) 2.25” (57.2 mm) 1.6 lbs (0.72kg)
IP-400VPCB 6.00” (152.4 mm) 6.00” (152.4 mm) 2.25” (57.2 mm) 1.6 lbs (0.72kg)
IP-600VPCB 6.00” (152.4 mm) 6.00” (152.4 mm) 2.25” (57.2 mm) 1.6 lbs (0.72kg)
IP-600-20-VPCB 5.10” (129.5 mm) 5.10” (129.5 mm) 6.25” (158.7 mm) 10 lbs (4.5kg)
DESIGN SPECIFICATIONS
Item Number Description Volts Amperage Output
IP-200VPCB DC Power Controller 200VDC 2.5, 4, 6.5, 10
IP-400VPCB DC Power Controller 400VDC 2.5, 4, 6.5, 10
IP-600VPCB DC Power Controller 600VDC 2.5, 4, 6.5, 10
IP-600-20-VPCB DC Power Controller 600VDC 13.2, 20
ELECTRICAL REQUIREMENTS
Item Number Input Voltage
IP-200VPCB 115, 176, or 230 VAC 1Φ
IP-400VPCB 220, 330, or 440 VAC 1Φ
IP-600VPCB 440, 550, or 660 VAC 1Φ
IP-600-20-VPCB 468 VAC 3Φ
Rear View
DC PowerControllerDisplay Board
(Sold Separately)
Patch Cable IP-LXCABLE06(Sold seperately, additional lengths available.)
Note: Isolation transformer required. More detail in Operating Manual