invisible series - habitech.s3.amazonaws.comhabitech.s3.amazonaws.com/pdfs/son/product flyers...
TRANSCRIPT
InvisibleSeries
Product Guide
The Sonance Invisible Series is the ultimate expression in architectural audio. Installed into the wall or ceiling and then finished over with the surrounding surface, Invisible Series speakers deliver ambient music that emanates throughout the space with no visual footprint. Available in five models to accommodate a wide range of room sizes and budgets.
The world's best sounding invisible speakers.
Matched with the Sonance DSP Amp, Sonance Invisible Series speakers reproduce the full range of frequencies, including crystal clear treble, natural midrange and deep smooth bass response. The result is best-in-class sonic performance that sets a new benchmark for the category.
Sound not sight - Sonance Invisible Series delivers unbelievable sound quality that emanates from the wall or ceiling, without any visible signs of a speaker. The space is filled with breathtaking music that seemingly comes from nowhere.
They’re designed to reproduce a best-in-class 170° of dispersion, which means the sound is spread out from the speaker at a wider angle, delivering even volume levels and better sound quality throughout the entire space.
Sonance Invisible Series
170°
Download the Sonance Brand Guide HERE
Sonance Invisible Series
IS2
Small 2way speaker suitable for smaller rooms 80w RMS (sold in pairs).
IS4 IS4 SST ISW IS4C
3 way full range speaker, suitable for a wide range of rooms – 100w RMS (sold in pairs
and individually).
Single Stereo version of the IS4 – 100w RMS (sold individually).
Invisible Woofer for extra bass support – 100w RMS(sold individually).
Design not distraction - Sonance Invisible Series speakers are finished over with the same material as the adjoining wall or ceiling surface, including lightweight plaster and paint, wallpaper, wood veneer, or even venetian plaster. They don’t just blend into the wall or ceiling, they become part of it.
State-of- the-art design and construction - Sonance Invisible Series speakers feature a high quality extruded aluminium chassis and injection moulded polypropylene diaphragm for many years of reliable service and peace of mind.
For every space, anywhere in the world - Sonance Invisible Series features the widest range of speakers to deliver zero visual impact in any size space. They can be found in luxury residences, art galleries, museums, restaurants and premier retail boutiques. They are also used exclusively world-wide by Louis Vuitton, Prada, Gucci, Miu Miu, Fendi and Dior!
The Sonance Invisible Series rangeFive models will accommodate a wide range of room sizes and budgets.
Commercial version of the IS4 speaker with 70v,100v taps and 8 ohm bypass (rear enclosure included) 100w RMS(sold individually).
+44 (0)1256 638500 [email protected] www.habitech.co.uk
Sonance Invisible Series
Versatile Installation
Most versatile installation
Sonance Invisible Series can be installed to a depth of up to 3mm of lightweight plaster (such as EasiFill), wallpaper or veneer without affecting the sound quality, making them the most versatile invisible speakers available.
Shallow design
At only 51mm (94mm with the optional enclosure), the extremely shallow design of Sonance Invisible Series speakers makes them compatible with a wide variety of construction types around the world.
Optional enclosure
The optional enclosure significantly reduces sound transfer through adjoining walls or ceilings without compromising the sonic performance of the speaker.
+44 (0)1256 638500 [email protected] www.habitech.co.uk
Watch the SonanceInvisible SeriesInstallation Guide here:
IS2The IS2 is designed for tight installations or very small spaces yet delivers sound that is only bested by the IS4.
! Optional metal enclosure for sound containment (SON-92969)
! Optional Place Saver for pre-construction (SON-IS2PS)
! Specifications subject to change.
! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Product Specifications
Sensitivity Dispersion Finish OverloadProtection
Cutout Dims(W x H x D) mm
88dB(1W/1 metre)
170º hemisphericalup to 10kHz
Paper surface readyfor up to 3.2 mmflexible material
and paint
Two independentself-resettinggel switches
(low and high)
410 x 307 x 51 (without enclosure)
410 x 307 x 97(with enclosure)
Tweeter WooferFrequencyResponse Impedance:
PowerHandling
26 sq cm planardiaphragm, driven
by a 25.4 mmvoice coil
322.6 sq cm planardiaphragm, driven
by a 25.4 mmvoice coil
50Hz – 20kHz ±3dB 80 watts RMS
Enclosure(W x H x D) mm
Shipping Weight EnvironmentTemperature
357 x 256 x 51 5.5 kg (pair) -17.7 to +51.7°C
8 ohms nominal
Front View Side ViewBack View
307 mm
410 m
m
51 mm
4 mm
25 mm
25 m
m
+44 (0)1256 638500 [email protected] www.habitech.co.uk
en
clo
su
re
97 mm
IS4The new benchmark for invisible speakers. The IS4 features state of the art planar diaphragm technology. The rigid metal frame and optional enclosure make this speaker the best sounding fully concealed speaker in the world.
Product Specifications
! Optional metal enclosure for sound containment (SON-92970)
! Optional Place Saver for pre-construction (SON-IS4PS)
! Specifications subject to change.
! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Sensitivity Dispersion Finish OverloadProtection
Cutout Dims(W x H x D) mm
90dB(1W/1 metre)
170º hemisphericalup to 10kHz
Paper surface readyfor up to 3.2 mmflexible material
and paint
Three independentself-resettinggel switches
(low and high)
410 x 613 x 51 (without enclosure)
410 x 613 x 97(with enclosure)
Tweeter MidrangeFrequencyResponse Impedance:
26 sq cm planardiaphragm, driven bya 25.4 mm voice coil
110 sq cm planardiaphragm, driven bya 25.4 mm voice coil
40Hz – 20kHz ±3dB 8 ohms nominal
Enclosure(W x H x D) mm
Shipping Weight
357 x 560 x 54 11.25 kg (pair)
EnvironmentTemperature
-17.7 to +51.7°C
PowerHandling
100 watts RMS
Woofer
729 sq cm planardiaphragm, driven by
a 51 mm voice coil
+44 (0)1256 638500 [email protected] www.habitech.co.uk
Front View Side ViewBack View
410 mm
613 m
m
25 mm
25 m
m
4 mm
51 mm
en
clo
su
re
97 mm
IS4 SSTThe IS4 SST features single stereo technology, the ability to drive one speaker with two inputs. The IS4 SST is impedance matched to ensure proper amplifier protection. The perfect choice for small areas, such as hallways and corridors where two speakers would be impractical or impossible to install.
Product Specifications
! Optional metal enclosure for sound containment (SON-92970)
! Optional Place Saver for pre-construction (SON-IS4PS)
! Specifications subject to change.
! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Sensitivity Dispersion Finish OverloadProtection
Cutout Dims(W x H x D) mm
90dB(1W/1 metre)
170º hemisphericalup to 10kHz
Paper surface readyfor up to 3.2 mmflexible material
and paint
Three independentself-resettinggel switches
(low and high)
410 x 613 x 51 (without enclosure)
410 x 613 x 97(with enclosure)
Tweeter MidrangeFrequencyResponse Impedance:
26 sq cm planardiaphragm, driven bya 25.4 mm voice coil
110 sq cm planardiaphragm, driven bya 25.4 mm voice coil
40Hz – 20kHz ±3dB 8 ohms nominal
Enclosure(W x H x D) mm
Shipping Weight
357 x 560 x 54 5.85 kg (pair)
EnvironmentTemperature
-17.7 to +51.7°C
PowerHandling
100 watts RMS
Woofer
729 sq cm planardiaphragm, driven by
a 51 mm voice coil
+44 (0)1256 638500 [email protected] www.habitech.co.uk
Front View Side ViewBack View
410 mm
613 m
m
25 mm
25 m
m
4 mm
51 mm
en
clo
su
re
97 mm
ISWThe ISW is a low frequency reinforcement to the IS line. Two voice coils drive the diaphragm for unsurpassed invisible low end response.
Product Specifications
! Optional metal enclosure for sound containment (SON-92970)
! Optional Place Saver for pre-construction (SON-IS4PS)
! Specifications subject to change
! Requires Sonamp DSP 2-150 or 8-130 (Sold separately)
! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Dispersion Finish OverloadProtection
Cutout Dims(W x H x D) mm
170º hemisphericalup to 10kHz
Paper surface readyfor up to 3.2 mmflexible material
and paint
Self-resettinggel switch
410 x 613 x 51 (without enclosure)
410 x 613 x 97(with enclosure)
FrequencyResponse Impedance:
35Hz – 150Hz ±3dB 8 ohms nominal
Enclosure(W x H x D) mm
Shipping Weight
357 x 560 x 54
5.85 kg (pair)
EnvironmentTemperature
-17.7 to +51.7°C
PowerHandling
100 watts RMS
Woofer
1097 sq cm planardiaphragm, driven bytwo 51 mm voice coils
Sensitivity
90dB(1W/1 metre)
+44 (0)1256 638500 [email protected] www.habitech.co.uk
Front View Side ViewBack View
410 mm
613 m
m
25 mm
25 m
m
4 mm
51 mm
en
clo
su
re
97 mm
IS4 CThe IS4 C is for any commercial or residential settings where a 70 or 100 volt system is being used. It is transformer-coupled, with 32W, 16W, 8W, 4W, 2W, 1W, .5W taps and 8-ohm bypass that are selectable from the speaker’s enclosure.
The IS4 C incorporates a polypropylene diaphragm that provides distinct woofer, midrange and tweeter radiation areas to ensure superior-quality sound in foreground music, public address and paging applications. Its integrated, steel enclosure provides up to 20dB of noise reduction on the back of the speaker. The frame is constructed from extruded aluminum. Connection is made via a barrier strip that is covered with a steel plate that features a connection point for 0.5” conduit.
Product Specifications
+44 (0)1256 638500 [email protected] www.habitech.co.uk
Dispersion Finish OverloadProtection
Cutout Dims(W x H x D) mm
170º hemisphericalup to 10kHz
Shipping Weight
11.25 kg (pair)
Woofer
Paper surface readyfor up to 3.2 mmflexible material
and paint
Front View Side ViewBack View
410 mm
61
3 m
m
25 mm
25 m
m
4 mm
51 mm
EnvironmentTemperature
-17.7 to +51.7°C357 x 560 x 54
Enclosure(W x H x D) mm
Tweeter Midrange
26 sq cm planardiaphragm, driven bya 25.4 mm voice coil
110 sq cm planardiaphragm, driven bya 25.4 mm voice coil
729 sq cm planardiaphragm, driven by
a 51 mm voice coil
TransformerPrimary Voltage
70V, 100V;8-ohm bypass
TransformerPrimary Taps
(70V): 0.5W, 1W, 2W,4W, 8W, 16W, 32W;(100V): 1W, 2W, 4W,
8W, 16W, 32W
FrequencyResponse
40Hz – 150Hz ±3dB
PowerHandling
100 watts RMS
Three independentself-resettinggel switches
(low and high)
410 x 613 x 51 (without enclosure)
410 x 613 x 97(with enclosure)
Sensitivity
90dB (1W/1 metre)
! Specifications subject to change
! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
en
clo
su
re
97 mm
PLACE SAVERSReusable units designed to be installed in new construction to reserve locations for the speakers during the early stages of construction. At the appropriate time, the speaker installer removes the Place Saver and replaces it with the Invisible Series speaker.
Available for the IS2, IS4, IS4 SST & ISW.
Small Place Saver for IS2! Dimensions (W x H x D): 410 mm x 307 mm x 108 mm
! Shipping Weight: 2.3kg each
! Net Weight: 1.4kg each
! Part No: SON-IS2PS
Large Place Saver for IS4, IS4 SST & ISW! Dimensions (W x H x D): 410 mm x 613 mm x 108 mm
! Shipping Weight: 3.6kg each
! Net Weight: 2.3kg each
! Part No: SON-IS4PS
ACOUSTIC ENCLOSURESThe 12.7 mm MDF enclosure provides sound containment,improves power handling and increases bass definition and clarity.
Small Enclosure for IS2! Dimensions with speaker (W x H x D):! 357 mm x 256 mm x 54 mm
! Shipping Weight: 2.7kg each
! Part No: SON-92969
Large Enclosure For IS4, IS4 SST & ISW! Dimensions with speaker (W x H x D):! 357 mm x 560 mm x 54 mm
! Shipping Weight: 5.4kg each
! Part No: SON-92970
For further instructions on using SA Space Savers with new Invisible Series products, please refer to www.sonance.com/products/invisible or use QR code.
Accessories
+44 (0)1256 638500 [email protected] www.habitech.co.uk
Invisible Series Associated Products
+44 (0)1256 638500 [email protected] www.habitech.co.uk
Click product for more detail