invendis rms solution · 2020. 7. 27. · rms •immediate notifications to site engineers on alarm...

© 2020 Invendis Technologies India Pvt. Ltd. All Rights Reserved. An ISO 9001:2015 14001:2015 BS OHSAS 18001:2015 Certified Company

Invendis RMS solution

An IoT & M2M Company

OUR SOLUTIONS DEPLOYMENT

© 2020 Invendis Technologies India Pvt. Ltd. All Rights Reserved. An ISO 9001:2015 14001:2015 BS OHSAS 18001:2015

Certified Company

OUR IIOT SOLUTION – ARCHITECTURE


Certified Company

OUR IIOT SOLUTION – CONNECTIVITIES


Certified Company

• Controllers

• Sensors

• Energy Meters

• Wireless Enablement

• In-country training

• 24x7 Phone/Email

• Local Support/RMA

• iTOC

• Analytics

• WFM

• OSS

• Install/Config. Tools

• Invendis managed installations I&C Software

App Suite

Hardware

Training &

Support

Fully Owned Solution

OUR IIOT FULLY OWNED SOLUTION


Certified Company

Visualize data to quickly understand operational performance both at network level & site level

Compare relative performance across geographical regions or sites

Identify high impact issues for the performance covering all aspects of site operations

View data from various facets of operations i.e. up-time, energy, asset and financial aspects

Predict key asset performance and help plan Maintenance/replacement as applicable

Analytics

Fuel planning and notification to field force for timely filling

Capture of diesel filling from site through mobile app

Energy correlation and forecasting

Preventive Maintenance

Planning & Forecasting

mTOC – Mobile application support on iOS and Android for field operation

Trouble ticketing and workflow

Remote controlling and configuration of supported controller

Manual Energy capture and comparison with monitored energy

Site O&M

Real time alarms & site parameters

Alerting on exceptions

Alarm wise Multilevel escalation

Notification to mobile application

Monitoring

ITOC FEATURES


Certified Company

ITOC ARCHITECHTURE


Certified Company

Ala

rms • Immediate

Notifications to site engineers on alarm detection

• Multi-dimensional view of alarms (critical, key alarms, all site alarms etc.)

• Quick access to critical issues to address Si

te M

onitori

ng • Lookup assigned sites

and view details

• Filter and proactively view sites with various categories of conditions for Battery, Power, Fuel etc.

• Optimized for all roles across the NOC

Act

ivity

Report

ing • Receive tickets, plan

and report activities.

• Spare management for visits

• Grid bill upload & Payment

• Fuel filling reports

MTOC FEATURES


Certified Company

MTOC SCREENS


Certified Company

Reliable communication using Dual SIM/LAN

Fail Over to SMS in case of mobile data outage

Data Storage over 30+ days

Optionally, send data to Secondary server.

Communication

Read, Configure and Control Site Equipment

Built-in Support for many site equipment: DG, Solar, Battery Controllers, Rectifiers, Air-con Controller

Integration

Fully Remote Managed via iTOC

Simplified installation and provisioning

Integrated Asset Reporting

OTA Firmware Upgrade

Supports Configuration of site equipment

Managed

Highly Configurable (UI/Commands)

Local computation of alarms

Locally computed Power source/ Run hours. Measurement Correlation to ensure accurate calculation

Customizable

Computing

ISENSE FEATURES


Certified Company


Specifications Measurements

Digital Inputs 24 Potential free type, Optically Isolated Digital Input

Digital outputs 8 Potential free relay outputs, Internally driven relays

RTD temperature probes – On board 2 dedicated AI ports with RTD probes

Analog Input 8 onboard Isolated

Accuracy: ±1% ; Voltage / Current selection through jumper

Inputs/ Outputs

All I/O (Excluding digital outputs) have provision for Galvanic Isolation

with Surge/ Overvoltage protection.

All I/O’s with provision of onboard LED

RTC RTC with battery back-up

LED 5 onboard LED, I/O LED

Generic Serial Ports RS232 -1 No.,RS485 – 2 No.

High Speed serial Ports USB – Console Port

Wireless Communication – On board Dual SIM GSM / GPRS module with external antenna

Wired Communication – On board Ethernet 1X 10/100Mbps

Power supply 12 to 15V, 20 to 60 Volts DC with Galvanic isolation

Operational Temperature 0°C to 60°C

Storage temperature -20°C to 85°C

Humidity 95% non-condensing

Protocols Modbus RTU/ ASCII, TCP/IP, SNMP

INVENDIS MAIN CONTROLLER ( iSENSE V2)



AC Current Measurement Red, Yellow Blue or L1, L2, L3

AC Voltage Measurement Average, VLL (RY, YB, BR), VLN (RN, YN, BN)

Power Factor (PF) Average & Phase wise

Active Power (kW) Total & Phase wise

Apparent Power (kVA) Total & Phase wise

Frequency (Hz) Frequency (Hz)

Active Energy (kWh) Both EB & DG

AC Current Measurement Average, AR, AY, AB

AC Voltage Measurement Average, VLL (RY, YB, BR), VLN (RN, YN, BN)

Power Factor (PF) Average & Phase wise

Active Power (kW) Total & Phase wise

ISOLATION (RS485) 2000 VAC Isolation for1min between communication &other circuits

Operating temperature -10°C to +55°C

AC Input Voltage Phase to Phase: 10 VAC – 440 VAC, Phase to Neutral 11 VAC – 320 VAC

Humidity 5% to 95% non-condensing

INVENDIS AC ENERGY METER ( DUAL CHANNEL)



Input Voltage: 48V DC (30V to 70 V DC)

CT Input CT’s, 0 to 100A measurable with 0 to 2V output

Auxiliary Power Supply 20 V to 70 V DC

Measurement 4 Channel DC kWh, Current, kW and Voltage

Accuracy ± 1.0% of FSD (5 % to 100 % Current range)

Resolution 0.1 KWH

RS 485 3-wire communication port with MODBUS protocol (RTU Mode)

Baud Rate 9600

Device/ Unit address 1 to 255

Power Consumption < 2 Watt at 30 to 60V DC

Calibration Soft Calibration through Software with Password protection

Operating Temperature 0 C to 55 C

Relative humidity 5% to 85% Non-Condensing

Dimensions 96mm x 96mm x 60 mm

Housing Polycarbonate Heat resistant grade

Password for editing of settings Calibration for each channel and reset of energy count provided with password protection.

INVENDIS DC ENERGY METER ( FOUR CHANNEL)



System Type 3 Wire

Temperature Range 0˚C to 100˚C

RTD Type PT100

Accuracy ±3%

Probe Diameter 5.12 mm

Cable type 3 wire Teflon

Length Standard 3 meters

Insulation Waterproof Sensing Probe with Supported Spring Sleeve

INVENDIS TEMPERATURE SENSOR & SPD FOR COMMUNICATION LINE


Mode of protection Transverse and Common modes

Maximum discharge current (8/20us) 20kA

Protection Stage Multistage

Maximum continuous DC voltage 8V

Impulse voltage 1.2/50us 15V

Maximum Load current 20mA

Line Resistance 5 Ohms

Operating temperature/ humidity -40°C to +80°C / 5-95% non-condensing

Mode of protection Transverse and Common modes

INVENDIS RMS HOUSING PICTURE AND CONNECTIONS


3 Ph Supply

4 Pole MCB

ON

ON

ON

ON

S1

CT

-B

S2

S1

CT

-Y

S2

iSense

D1+ D1-

Incomer MCB in ACDB

To

Loa

d

CT Set

S2

CT-R

S1

S2

CT-Y

S1

S2

CT-B

S1

ACEM-Tenant1

S1

CT

-R

S2

DG Aux

P N

Rectifier- 48V

+ -

INVENDIS DC METER AND AC METER WIRING CONNECTIONS

INVENDIS TEMPERATURE SENSOR CONNECTIONS

RTD 1:-

RTD Red wire should be connected to iSense 1R

RTD White1 wire should be connected to iSense 1W


RTD 2:-

RTD Red wire should be connected to iSense 2R



Temperature sensor trouble shooting:

If the temp value is not displayed or displayed incorrectly:

Check if the temp sensor wire is connected properly in the connector port.

Check if any wire is loose, or has been cut or damaged.

PR /

SP

C1/

SN

A7+ A7-

Fuel Sensor

+ -

Connector Block

+ -

Fuel Sensor Connection Details

Orange

Orange White

The Fuel sensor is used to measure the volume of fuel (Diesel) present in the fuel tank.

The sensor is a pressure based fuel sensor. This will measure the pressure exerted by

the fuel on the sensor which is the proportional to the height of fuel present in the

tank. Then the height of fuel is used to calculate the volume of fuel using the tank

dimension and the capacity.


INVENDIS INTEGRATED 3RD PARTY FUEL SENSOR IN iSENSE


Surge:

An oversupply of voltage from the Electricity Board Company

that can last up to 50 microseconds. Although surges are very

short in duration and very high voltage.

Major cause behind frequent failure of devices are perceived with

three issues

1. AC High voltage

2. Improper grounding

3. Lightning

To overcome the surge related issues, Invendis is recommending the

solution to install the SPD (Surge Protection Devices) along with the

equipment. SPDs make sure that the surge is diverted to ground (Earth)

as and when the surge occurs.

Thus this approach will protect the RMS equipment getting affected

from surge, high voltage or grounding.

INVENDIS SPD`S FOR SURGE PROTECTION

Rectifier RJ45 Port Switch at Site iSense RJ45 connection

E

L

t

e

k

E

m

e

r

s

o

n

3RD PARTY RECTIFIER CONTROLLER INTEGRATION


• Narada

• VISION

• LEOCH

• Potevio

• Wolong

• Panasonic

• Coslight

• Deepsea

• Intelilite

• 3Tech

• Cummins

• Geko

• RID

• Himoinsa

• Emerson

• Eltek

• Lineage

• Huawei

• Delta

• Eaton

• Enatel

3RD PARTY SITE CONTROLLER INTEGRATION

• Outback

• Delta

• ABB

• Ingecon

• Kaco

• Power One


Invendis Technologies India Pvt. Ltd

38th Main, BOOHBCS Layout

BTM 2nd Stage

Bangalore – 560068

INDIA

THANK YOU


invendis rms solution · 2020. 7. 27. · rms •immediate notifications to site engineers on alarm...

Documents