intrusion alarm installation plan - ceo residence
TRANSCRIPT
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Prepared by
Shahbaz Ali KhanAuthentic Logical [email protected]
+92-321-2208982
Summary
Purpose of this document is to discuss installation plan ofIntrusion Detection System at residence of the CEO ofBurj Bank, situated at Khayaban-e-Muhafiz, DHA, Karachi.
Recommended solution is Sensor and Camera basedintegrated system, which offers remarkably improvedsecurity.
As CCTV is already being installed, it will be used for intrusion detectionand alarm in combination with Infrared Beam Sensors & Infrared CurtainSensors.
Infrared Connectors and Cameras shall be integrated in such a way thatboth systems (CCTV & Intrusion Detection) keep working independently.Means, if one system fails, other will continue working.
CCTV DVR
Cameras
Infrared Beam Sensors
Intrusion Alarm Panel
Infrared Curtain Sensor
Motion detection by camera
Proposed CCTV Camera can detect motion inmultiple zone within its field of view. Cameracan perform multiple actions in case of motiondetection in marked area such as:
• It can trigger alarm.• It can switch on/off many
electrical/electronic devices i.e. lights.• It can send snapshot to email or ftp server.• It cans end alert to other security devices
i.e. intrusion detection system.• It can pop up camera video on full screen for
immediate attention.Motion Detection Area
Infrared Fence (Beam Detector)
The barrier fence detector consist of a transmitter(TX) and receiver (RX). Transmitter sendsynchronized infrared beams to a receiver. Whenintruder (body) cross through the beams or cut thebeams continuously, the alarm will be generated,barrier will make alarm buzzer and alarm LED willflash, send alarm signal to alarm system or accesscontrol system.
• 2,4,6,8 or 10 infrared (not visible laser) beamsselectable.
• Perfect function in anti-cutting &short circuit,and tamper & pets immunity.
• All-weather outdoor usage, totally air-proofdesign.
• Anti strong light up to 50000 LUX, totallyresistance to external interference.
Infrared Curtain detector for exterior
The detector CURTAIN-PM creates an area of protectionor privacy (like a curtain) to protect places likeentrances, windows and open fields. This type ofdetector allows the free movement of people andwithin the protected area without an alarm sounded.The detector has protection, waterproof, allowing it tobe installed indoors or outdoors.
To increase the reliability of detection and false alarmimmunity the detector is equipped with protectionagainst attempts to block (masking) of the IR beam.Detects transparent objects like glass and plastic andattempts to block the lens through spray paint.The detector CURTAIN-PM also combines two detectiontechnologies through detection: passive infrared andmicrowave.
Door Window Contact Sensors are cheaper option for intrusion detection but these sensors will alert only
when intruder has already entered the premises. While the proposed Infrared detectors alert while intruder is
still outside and trying to get in. Therefore, infrared detectors are recommended for better security.
However, one Door contact will be used at the door between Kitchen and Grease Kitchen.
Boundary wall
Main Building
Motion detection is not required for this area because there will be guards movement all the times. However, CCTV system will be configured to pop up camera view in guards room on motion
detection so the guard will be aware of all movement around main building.
If motion is detected by CCTV Camera in this area, related camera screen will popup at Guard Room’s CCTV Display, enabling guards to quickly verify that it is an intruder or one of their
colleagues. If no intruder, guard will reset the alarm otherwise Siren can be triggered or alert message can be sent to any email, mobile phone or control center of Armed Response Company.
Intrusion detected
Related Camera popped upat Guard Room’s Display
Infrared Sensors Placement – Ground Floor
Door Contact (kitchen only)Infrared Curtain DetectorInfrared Beam Detector
PIR Motion sensor (roof stair)Infrared Curtain DetectorInfrared Beam Detector
Infrared Sensors Placement – First Floor
Infrared Sensors Placement – First Floor
Windows at first floor are not that vulnerable because of height and no standing place like shade. Therefore, these sensors can be eliminated but these Beam
Detectors and PIR Motion sensor are necessary.
BOQ
Item DescriptionGround
Floor
First
FloorTOTAL
Security Control Panel (Compatible with Home Seer Automation System)
1
IR Beam Detector (6 beams) with 5 m range 4 6 10
IR Beam Detector (6 beams) with 10 m range 4 2 6
IR Beam Detector (6 beams) with 20 m range 2 2 4
Infrared Curtain Detectors with 4 m range 2 2 4
Door/Window Contact 1 0 1
PIR Motion Sensor 0 1 1