introduction to the work health and safety regulations implications for small business
DESCRIPTION
INTRODUCTION TO THE WORK HEALTH AND SAFETY REGULATIONS IMPLICATIONS FOR SMALL BUSINESS . WHAT HAS CHANGED?. Work Health and Safety Act will replace the NSW OHS Act Work Health and Safety Regulations will replace the current NSW OHS Regulation - PowerPoint PPT PresentationTRANSCRIPT
INTRODUCTION TO THE WORK HEALTH AND SAFETY REGULATIONS
IMPLICATIONS FOR SMALL BUSINESS
WHAT HAS CHANGED?•Work Health and Safety Act will replace the NSW OHS
Act
•Work Health and Safety Regulations will replace the current NSW OHS Regulation
•A set of national Codes of Practice will gradually be introduced
For most workplaces the new WHS Regulations will be very similar to the current OHS Regulation
PRELIMINARY
REPRESENTATION AND PARTICIPATION
GENERAL RISK & WORKPLACE MANAGEMENT
HAZARDOUS WORK
PLANT AND STRUCTURES
WHAT’S COVERED IN THE WHS REGULATIONS
CONSTRUCTION WORK
HAZARDOUS CHEMICALS
ASBESTOS
MAJOR HAZARDOUS FACILITIES
MINES
GENERAL
WHAT’S COVERED IN THE WHS REGULATIONS
Managing Risks
•Must identify and eliminate or control risks
•Must eliminate risks and if not reasonably practicable minimise risks
•Risks unable to be eliminated must be controlled through a hierarchy of control
•Risk assessment is not mandatory in most cases – outcome focused
• Must maintain and review risk control measures
• HSRs can request a review of a control measure in certain circumstances
• Where specific controls are outlined in the WHS Regulations they must be followed (e.g. controls for hazardous chemicals or noise)
Managing Risks
Training, Information and Instruction
Must be suitable and reflect:
• The nature of the work carried out by the worker
• The nature of the risks associated with the work
• The control measures implemented
Consultation and Representation
•WHS Act includes key requirements
•WHS Regulations:− Outlines the factors in determining work
groups− Specifies HSR training details
• Code of Practice provides further guidance
Issue Resolution
the degree and immediacy of risk to workers or other persons involved in the issue;
the number and location of workers and other persons affected by the issue;
the measures (both temporary and permanent) that must be implemented to resolve the issue;
who will be responsible for implementing the resolution measures
Procedure must take into account:
Working Environment
•Workplace layout allows persons to move around and access and exit without risk
•Work space is adequate for the task
•Floors and other surfaces are suitable
•Lighting and ventilation is suitable
•Work in temperature extremes is without risk
•Work near essential services does not create risks
FacilitiesMust provide facilities including toilets, drinking water, washing and eating facilities relevant to:
•The nature of the work•The hazards in the workplace
•The size, location and nature of the workplace•The number and composition of workers
Personal Protective Equipment
•Must be appropriate to the activity and hazard
•Must be a suitable size and fit and maintained and replaced as required
•Workers must be informed and trained on PPE use
First Aid
13
•Must provide accessible First Aid equipment and facilities
• Ensure adequate numbers of workers are trained or have access to others who are trained
• First Aid arrangements must take into account
• The nature of the work
• The hazards in the workplace
• The size, location and nature of the workplace
• The number and composition of workers (and others)
Emergency Plan•Must include procedures for rapid response, evacuation,
notification, medical assistance and communication
•Must inform workers of procedures
•Must be tested in line with plan schedules
• Emergency plan must take into account− The nature of the work− The hazards in the workplace − The size, location and nature of the workplace− The number and composition of workers (and others)
Case 1 Issues to consider
A small business employs 20 people. The injury register shows lacerations and burns are the most frequently recorded injury.
The existing NSW regulations mandating number of first aiders, kit numbers and contents will not be continued in the new WHS regulation.
What First Aid arrangements are likely to be adequate?
• What is the size and layout of the workplace?• Is the workplace in close proximity to
medical services or hospitals?• Do any workers work off site?
Suggested Conclusions
• An assessment should be undertaken• If the workplace is compact then kits can be
located in the main operating areas• If already complying with the existing NSW
regulations a kit, suitably stocked and a trained first aider should already been in place. Arrangements for off site workers and an additional burns module for the kit may be required
Short case study exercises No 1
FallsManage the risk of a fall by a person from one level to another by:
• Ensuring so far as is reasonably practicable that any work that involves the risk of a fall is carried out on the ground or on a solid construction
• Providing safe access to and exit from the workplace or any area within the workplace with the risk of a fall
FallsIf not reasonably practicable to eliminate the risk of falling then minimise the risk by providing adequate protection such as (in order):
• Providing a fall prevention device or
• Providing a work positioning system, or
• Providing a fall arrest system
Hazardous Manual TasksTake into account risk factors including:
•Postures, force, duration and frequency
•Workplace environmental conditions, design and layout of workplace
•Systems of work used
•Nature, size, weight and number of persons, animals or things involved in the hazardous manual task
Remote or Isolated Work•Must manage risks to the health and safety of a worker associated with remote or isolated work
•Must provide a system of work that includes effective communication with the worker
Noise•Ensure that a worker is not exposed to noise levels above the exposure standard
•Provide audiometric testing if the worker is frequently required to use hearing protection to reduce exposure to noise and in combination with other factors
Case 2 Issues to consider
A tree faller employed by a small landscaping company uses a chain saw to fell trees with work days as long as 10 hours.
The faller has been supplied with hearing protection and uses it in line with instructions.
The chain saw generates noise above the exposure standard set out in the WHS regulations
Should the tree faller have his hearing tested and monitored with audiometric testing?
• Has the noise level been checked?• How long does the worker use the chain saw
for on an average day?• Is the hearing protection appropriate and well
maintained?
Suggested Conclusions
• The noise is above the exposure standard and the worker should be consulted about audiometric testing
• Testing should be carried out by qualified persons and results made available
• Depending on results measures should be taken to reduce exposure (e.g. better maintenance of saw, up-rated hearing protection)
Short case study exercises No 2
Airborne Contaminants•Must ensure exposure standard for a
substance or mixture is not exceeded
•Must undertake atmospheric monitoring of contaminants in certain circumstances
•Must keep records and make accessible to those exposed to contaminants
Hazardous Atmospheres •Must manage risks associated with
hazardous atmospheres
•Must manage risks associated with an ignition source in a hazardous atmosphere
•Must ensure that flammable or combustible substances are kept at the lowest practicable quantity
Falling Objects•Must manage risks of falling objects if reasonably likely to injure a person
•If not possible to eliminate risk then minimise risks to health and safety by:
− Preventing free fall of objects
− Arresting free fall of object (e.g. barriers, safe means of lowering objects)
Some things may appear to be missingAbrasive blasting Welding
Some construction hazards e.g.: overhead protective structures,
structural collapse, lowering of materials
Spray Painting
Certificates of competency for pest controllers
Licensing for load shifting equipment
GENERAL DUTIES
Identification and Management of Risk
What is reasonably practicable - state of knowledge
Short case study exercises No 3Case 3 Issues to consider
A panel shop regularly undertakes spray painting of vehicles with two- pack paint . They use a booth built to Australian Standards and use relevant protective equipment.
Spray painting will no longer be specifically regulated under the new WHS regulations.
Does this mean the panel shop should conclude that the process has been de-regulated and that there are no requirements to meet?
• How does the Managing Risk section of the regulation apply?
• How does the airborne contaminants section of the regulation apply?
• Are there any other section of the regulation that apply?
Suggested Conclusions
• Spray painting must continue to be undertaken without risk to health and safety
• The hazards must be identified and risk controls used – the airborne contaminants, hazardous chemicals and lead process sections may all apply
• Existing practices based on previous regulation and authoritative guidance will form the basis of the state of knowledge
Approved Codes of Practice
A practical guide to achieve the standards of health and safety required under the Work
Health and Safety (WHS) Act and Regulations
Provide duty holders with guidance on effective ways to manage work health and
safety risks
• Admissible in court proceedings under the WHS Act and Regulations
• May be relied on by courts as evidence of what is known about a hazard, risk or control and in determining what is reasonably practicable
• Designed to be used in conjunction with the WHS Act and Regulations but do not have the same legal implications
• WHS Act and Regulations may be complied with by following another method if it provides an equivalent or higher standard
• An inspector may refer to an approved Code of Practice when issuing an improvement or prohibition notice
What is the legal effect of Codes of Practice?
Codes of PracticePRIORITY CODES
How to manage work health safety risks
WHS Consultation, Cooperation & Coordination
Managing work environment and facilities
Managing noise and preventing hearing loss at work
Hazardous manual tasks
Confined spaces
How to prevent falls at workplaces
Preparation of safety data sheets for hazardous chemicals
Labelling workplace hazardous chemicals
How to manage and control asbestos in the workplace
How to safely remove asbestos
WHS
Reg
ulati
on
First Aid in the Workplace Demolition Work
Managing Risks in Construction Work Spray Painting and Powder Coating
Preventing Falls in Housing Construction Abrasive Blasting
Managing Electrical Risks at the Workplace Welding and Allied Processes
Managing Risks of Hazardous Chemicals Safe Access in Tree Trimming and Arboriculture
Managing Risks of Plant in the Workplace
Preventing and Managing Fatigue in the Workplace
Safe Design of Building and Structures Preventing and Responding to Workplace Bullying
Excavation Work
Second Stage Codes of Practice and Guidance Material
Transitional arrangements and WorkCover NSW Codes
Existing NSW Codes of Practice can continue to operate until replaced by national Codes of Practice or guidance materials
Where NSW has a Code of Practice on issues that are not specifically regulated, these Codes will become guidance material and must be considered when deciding what is “reasonably practicable”
Questions - Please!