RC

Planes

The Word “RC Planes” Stands For Radio Controlled Planes

1- Trainer Plane. 2- Sport Plane. 3- Aerobatic Plane. 4-3D Plane. 5- Gliders. 6- Jet Plane. 7- Helicopters.

Specifications : 1- High Wing. 2- Straight Wing. 3- Flat Bottomed Airfoil. 4- Low Speed. 5- Ease of Controllability.

Specifications : 1- Usually Low Wing. 2- Usually Symmetric Airfoil. 3-Advanced than trainer plane. 4- The Ability of maneuverability. 5- Faster than trainer plane.

Specifications : 1- Advanced model of Sport Plane. 2- It’s used for aerobatics. 3- Similar to 3D Planes. 4- Usually mid-wing Plane.

Specifications : 1- Symmetric Airfoil. 2- Larger Control Surfaces than Aerobatic. 3- Mid-Wing Plane.

Specifications : 1- High Aspect Ratio (Large Wing). 2- Low Speed.

Specifications : 1- Very fast planes. 2- Powered by EDF “Electric Ducted Fans” or Micro jet Engines. 3- Thin Airfoils.

Specifications : 1- VTOL Powered (Vertical Take Off and Landing).

1- Balsa Wood. 2- Foam. 3- Fiber Glass (Needs molds). 4- Coroplast.

1- Body. 2- Wings. 3- Tail. 4- Landing Gear. 5- Source of Power ( Engine or Electric Motor ).

Retractable Tail Dragger

Nose

1- Engine (Gas or Nitro) or Motor(Brushless (inrunner-outrunner) - Brushed)..(with a Propeller). 2- Servo Motors.(Big-Standard-mini-micro-peco-nano). •Big servo motor (100 gm). •Standard servo motor ( 45 gm). •Mini servo motor ( 20 gm). •Micro servo motor ( 8 gm). •Nano servo motor ( 2 gm).

Two Stroke Nitro Engine Four Stroke Gas Engine

Inrunner Brushless Motor Outrunner Brushless Motor

Brushed Motor

(N*N)…e.g. (9*6) (Length by Inch * Pitch)

1- Remote Control. 2- Receiver(3-14) channel. 3- Speed Controller. 4- GYRO. 5- Batteries. 6- Charger. 7- Balancer.

Brushless ESC Brushed ESC

Lithium Polymer (LIPO) (1 cell = 3.7 V) Ni-Cd (1 cell = 1.2 V) NiMH (1 cell = 1.2 V)

Hinges. Control Rods. Horns. Clevis