introducing pigmento zinc - alpolicⓇ · introducing pigmento zinc the natural textures of zinc...
TRANSCRIPT
Your Design | Perfected
INTRODUCING
PIGMENTO ZINC
THE NATURAL TEXTURES OF ZINC COMBINED WITH ORGANIC COLORS
OZZ Orange
NZZ Brown
GZZ Grey
RZZ Red
BZZ Blue
S U R FA C E T R E AT M E N TWith PIGMENTO®, the sur face of QUARTZ-ZINC® coi l is glazed with mineral color pigments to produce r ich ear thy hues. The vis ible and natural texture of the QUARTZ-ZINC® wil l remain, but the resul t is a dis t inct ive shine that of fers the deep texture of a natural metal wi th the wide palet te of man-made colors.
F I N I S H T O L E R A N C EFin ish color of natura l meta l cannot be cont ro l led and some var ia t ion should be expected.
P R O D U C T T O L E R A N C EWidth: ± 0.08” (2mm)
Length: ± 0.16” (4mm)
Thickness: 3mm ± 0.008” (0.2mm)
4mm ± 0.008” (0.2mm)
6mm ± 0.012” (0.3mm)
Bow: Maximum 0.5% of length and/or width
Squareness: Maximum 0.2” (5mm)
Peel Strength: >22.5 in lb/in (ASTM D1781)
ALPOL IC® mate r ia l i s t r immed and squared wi th cu t
edges to of fer the bes t sheet edge condi t ions in the
indus t r y.
P R O D U C T D ATA• Standard Sheet Size : 38” x 146”• Stock: Cus tom order a t th is t ime• Thickness: 4mm s tandard, 3 or 6mm avai lable• Core: ALPOLIC/fr s tandard, ALPOLIC PE avai lable
WA R R A N T Y
Standard sheet : 10 Year
F in ish: Not appl icable
Cal l ALPOLIC® Cus tomer Ser v ice for exc lus ions and
warranty detai l s .
F I R E P E R F O R M A N C EALPOL IC® shee t s can be p roduced wi t h a f i r e res is tan t ( f r ) minera l f i l led core or a polyethy lene (PE) core. Each has been tes ted by independent tes t ing labora to r ies us ing na t iona l ly recognized s tandards.
ALPOLIC®/fr mater ia l meets a l l requi rements of the In ternat ional Bui ld ing Code ( IBC) for non-combus t ib le cons t ruc t ion and the ICC-ES ESR 2653.
ALPOLIC®/PE meets a l l requi rements for bui ld ing appl icat ions under 40 feet f rom grade and the ICC-ES ESR 3704.
P R O D U C T N O T E S
– Zinc composi te mater ia ls should only be used in a rainscreen sys tem.
– Sheets should be s tored f la t in a dr y, indoor envi ronment.
– Fabr icate sheets a t temperatures above 55°F.
– Refer to ALPOLIC® fabr icat ion manuals for rou t ing and fabr icat ion recommendat ions.
– Pro tec t ive f i lm should be removed soon af ter ins ta l la t ion.
– Zinc needs to be iso la ted f rom aluminum and other diss imi lar meta ls to avoid galvanic cor ros ion.
– ALPOLIC® and VMZINC® recommend the use the same metal on both s ides of composi te mater ia l in order to avoid sheet dis tor t ion caused by the di f fer ing ra tes of thermal expansion of diss imi lar meta ls .
METAL COMPOSITE MATERIALSSOLID
PIGMENTO ® SERIES
Natural Metal Skin
PE or fr Core
Natural Metal Skin
Zinc Skin
Zinc Skin
PIGMENTO® Finish
401 Volvo Parkway, Chesapeake, VA 23320Telephone 1.800.422.7270 | Fax 757.436.1896
www.alpolic-americas.com | Email: [email protected]
ALPOLIC® TECHNICAL ASSISTANCE1.800.422.7270 | [email protected]
LITAP3009/REV 1011319