introduce shannon microcoil
TRANSCRIPT
Introducing Shannon MicroCoil
Who we are• Shannon MicroCoil is a division of Shannon Coiled Springs
which deals specifically with the requirements of the medical device industry for medical wire forms and coils. SMC has over 30 years of wire forming and processing expertise in its operations. We are ISO13485 Certified.
• Formed in 1978, Limerick, Ireland.
• 25,000sq ft facility in Limerick.
• We have a highly skilled and dedicated workforce.
Our Premises
Wire Forming
Welding Micro Coiling
What We Do
Grinding
Micro Coiling• Wire sizes 0.001” upwards
• Coil diameters 0.004” up
• Variable Pitch & Diameter
Typical Application: Endoscopy•Small and large bore instrument shafts
•Round and flat wire profiles
•Centerless ground super smooth
•Up to 3 metres length
•Tube to coil splicing
Stylets and Custom Cores
•Full range of stylets from a range of materials
•Wire sizes 0.14” and up.
•Range of end geometries.
•Shaft tapering.
Wire Forming• 0.35mm wire diameter and up
• 3D shaping and complex design
• Sub Assembly
• Gold and platinum plating
• Stylets and Stent holders
Welding• Micro Plasma
• Micro Resistance
• Silver Soldering
• Wire and Foils
Grinding• Wire / coil / rod / tube.
• Steps and Tapers
• Mandrels
• 0.35mm and up
• PTFE/FEP Coating
• Stainless Steels, Nitinol, PEEK etc.
What you can expect from us
• ISO 13485 Certified• Design Support• Prototyping• Trial Batch
• Full production runs• Validation support
Thank you