interns guide to multipoint
DESCRIPTION
PPTTRANSCRIPT
PowerPoint Presentation
An Interns Guide to basic WMS 2011 setup in just 8 easy stepsHow to set up MultiPoint Server 2011 Microsoft CorporationBy: Livi EricksonStep 1: Download ISO file
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=3188a587-3542-4dda-99b3-551cdabe581f
Step 2: Burn ISO file to disk / flash drive
Repeat for each stationEach station:USB HubMonitorKeyboardMouseTo set up a station:Plug USB hub into host computerPlug in monitor to computerPlug in keyboard / mouse to hubStep 3: Set Up HardwareStep 4: Boot MultiPoint computerfrom disk / flash drive
Step 5: Go through software setup
Select Local SettingsAccept License Terms Choose Install LocationStep 6: Configure MultiPoint Settings
Choose options and continue with installStep 7. Install Display Drivers (if prompted)Log in as administrator (WMS will be in maintenance mode)
Search on internet for the 64-bit display driver for your graphics card(s)
Download and install
Restart in normal mode
Step 8: Map stations
Each station connected should have this screen displayedWindows MultiPoint Server Planning Guide: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=501ba465-382f-41cb-bbea-b9bf580e2bb2Windows MultiPoint Server Planning Guide:http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7e762ce6-562d-449d-be0d-52c0103edf60MultiPoint Online:Home page: www.microsoft.com/multipointTwitter: @msmultipointYoutube: www.youtube.com/msmultipointFacebook: www.facebook.com/windowsmultipointserver
Ask a Question: http://social.technet.microsoft.com/Forums/en-US/windowsmultipointserver/threads
Additional Resources