Generation painting Contractor

When it comes to interior Painting , just like most Painting projects , a quality product should be used to insure durability and longevity. Premium products will allow you to re-paint less often which will save you thousands over the course of 10 or 20 years.

Interior Painting

Always remember that paying a few extra dollars a gallon will go along way versus trying to save a minimal amount of money. Cheaper Paints are harder to use and will require more time & labor to apply properly.

A common mistake when purchasing paint is to go to the nearest big box store. Those products are very poor quality and are usually sold by a customer service rep who has limited knowledge of the Painting business.

MAB – Rich lux / Wallshield Brands Sherwin Williams – Duration / Super Paint / Harmony Brands

Ben Moore – Aura / Regal / Ben Brands

Hollandlac Brilliant Finish (Shrueder Dutch Paint)

When Painting or restoring Wood surfaces such as Trim , Doors , Shutters , Cornices , Windows , etc. there are many Domestic oil based products available.

Those products are decent and will provide a good look for a minimal time. If you are looking for a high quality product then look no further than the Dutch market. The Fine Paints of Europe Hollandlac line is the Bentley of Paints. The finish is unmatched by any in the world. It will keep its Pigment & Shine for 20+ years.

This product is the only product recognized the National Historic society for use on all significant historic landmarks. The completion of Washingtons home in MT Vernon was the latest landmark to receive this product. So if your looking for a Paint that is second to none , then Fine Paints of Europe ( formerly Shrueder ) is the one.

Elastomeric Coatings

Elastomerics can be applied at 35 Degrees as long as the temp. reaches above that for more than four hours in the day.

The time is needed to allow the coating to properly cure and provide a lasting finish.

There are some industrial Masonry products on the market that are sealers and they could be used in emergency situations to coat masonry below 35 degrees.

It is recommended however to only use these products as a safety measure.

Services

At CTS PAINT PROS we offer many services allowing our customers to save time & money by using one trusted contractor. We are proficient in all areas of:

Painting

( interior / exterior / elastomeric coatings / heat resistant / hvlp / airless / mastics / epoxy / dry

fall / dtm / marine coatings / stains etc. )

Priming

( red oxide / kem bond / insyl-x / lok-tite / superbond / xim / bin / low voc / odorless )

Staining

( lenmar / mckloskey / zar / old masters / sikkens /cabots / minwax / ici / ben moore / many

more avail.)

Carpentry

( restorations / repairs / new installs )

Hardwood floors

( installs / refinishing / staining / steps )

Cornice

( restorations / new installs / metal or wooden )

Shutters

( restorations / historical / pintels / dog ears / new installs )

Drywall – plaster

( repairs / installs / straw bale / expert finishing / mold resistant )

Metal

( capping / welding / flashing )

Tile

( ceramic / mosaics / walls / floors / glass block )

Roof coatings

Driveway sealing

Gutters

( installs / repairs / cleaning / copper )

Doors

( restorations / historical / refinishing )

Windows

( historical / restorations / installs / straps / weights / glazing / mutins / hardware )

Caulking

( all applications )

All types of restorations & repairs

For More Information Please Visit Site

http://www.ctspaintpros.com