interface solution line card -...
TRANSCRIPT
Demand Moore Reliability • www.miinet.com
Interface Solution Line Card
June 2016
When you need to interface fi eld processes with computer-based systems, readout equipment, and other instrumentation... our technology, services and exper-tise help you do it effi ciently, safely and cost-eff ectively.
AC Power Transducers and MonitorsSchedule maintenance, identifyineffi ciencies, cut energy use andprevent expensive damage to aload device by accuratelymonitoring AC power use.
Fieldbus Device Couplers and Power SuppliesDeliver a fast and easy way toconnect, protect, power and terminate multiple fi eldbus devices in FOUNDATION fi eldbus™ and PROFIBUS PA segments.
Process Control and Distributed I/O NetworksEliminate expensive point-to-pointwires by sending just a few–or thousands of–process monitoring and control signals between thefi eld and control room on one digitalcommunication link.
Signal Transmitters, Isolators and ConvertersConvert, isolate, split, boost andstep down process signals so fi eldinstruments can interface directlywith indicators, recorders, DCS,PLC and PC-based SCADAsystems.
I/P and P/I ConvertersConvert a current signal to apneumatic signal so a DCS, PLC orPC can control a valve or actuator;or convert pneumatic signals to current signals so remote pneumatic devices can interface with electronicinstruments and computer-basedmonitoring systems.
Indicators and DisplaysTake a process input signal from atransmitter loop and view real-timeprocess status in rugged andhazardous fi eld environments.
Limit Alarm Trips and SwitchesProvide on/off control, warn oftrouble, or provide emergency shut-down by sending one or more alarm(relay) outputs when a monitoredprocess signal falls outside of aselected high and/or low limit.
Temperature Sensors, Transmitters and AssembliesTake a weak, low-level RTD orthermocouple signal and convert itto a high-level analog signal moresuitable for long-distance transmission through a noisy plant,and ready for direct interface withan indicator, recorder, PLC, DCSor PC-based SCADA system.
Smart HART® Loop Monitors and InterfacesBreak out analog and discreteprocess, status and diagnosticsignals from smart multivariabletransmitters and valves; monitorcritical and safety-related loops;prevent costly false shutdowns; and warn of unwanted process orinstrument fault conditions.
Process Controllers, Monitors and Backup StationsPrecisely control and monitor atemperature, pressure, level or fl owprocess variable in batch andcontinuous processes, or back upcritical or safety-related loopscontrolled by PLC, DCS and PC-based systems.
Functional Safety - IEC 61508Monitor, alarm or shutdown critical and hazardous processes, measure critical temperatures, isolate a Safety Instrumented System (SIS) loop while passing HART data, or split critical signals while passing HART data.
Pneumatic
I/P and P/I Converters
Demand Moore Reliability • www.miinet.com
Signal Interface Instruments Enhance
Monitoring/Control Systems
Analog, Smart HART ®, FOUNDATION Fieldbus™
and PROFIBUSTemperature Transmitters
RTDThermocouple
OhmMillivolt
Monitoring/Control SystemCurrent, Voltage, RTD, Thermocouple,
Resistance, Potentiometer,Discrete and Relay I/O
HTTP - Web ServerMODBUS/TCPMODBUS RTU
MODBUS Master
* All product names are trademarks of their respective companies.* HART is a registered trademark of the HART Communication Foundation.
Signal Transmitters, Isolators, Converters
and Splitters
4-20mAHART®
FieldbusPROFIBUS
Process Control andDistributed I/O Networks
Current/Voltage4-20mA with HART®
Frequency
Up to Three4-20mARelays
MODBUS RTU
Process Controllers,Monitors and Backup StationsSmart HART® Multivariable
Transmitters and Smart Valves
Smart HART ®
Loop Monitorsand Interfaces
MooreHawkeFieldbus Device Couplers
and Power Supplies
FOUNDATION fi eldbus™PROFIBUS PA
Indicators and Displays
Current,Voltage,
RTD,Thermocouple
Relay
4-20mA4-20mA with HART®
Analog Outputor Relay
4-20mA
Relay
Functional Safety - IEC 61508/61511
Safety InstrumentedSystems (SIS)
4-20mA4-20mA with HART
Relay
Alarm Trips
Current, Voltage,RTD, Thermocouple, HART®
(Safe Area or AssociatedIntrinsically-Safe Inputs)
The latestinnovations in monitoring and control interface solutions are
just a click away.
Everything you need to fi nd signal interface instruments fast!Take a tour of our new website! You will fi nd new and crisp landing pages with easy to navigate menus that allow you to fi nd what you need quickly and effi ciently. Explore our Interface Solution Download Center where you will fi nd relevantdata for each of our products on one page!
www.miinet.com
©2016 Moore Industries-International, Inc.
United States • [email protected]: (818) 894-7111 • FAX: (818) 891-2816
Australia • [email protected]: (02) 8536-7200 • FAX: (02) 9525-7296
Belgium • [email protected]: 03/448.10.18 • FAX: 03/440.17.97The Netherlands • [email protected]
Tel: (0)344-617971 • FAX: (0)344-615920
China • [email protected]: 86-21-62491499 • FAX: 86-21-62490635
United Kingdom • [email protected]: 01293 514488 • FAX: 01293 536852
y.