interchangeable e1/t1 pri card - allo.com · 2019-08-03 · ss7 signaling supported. 4 e1/t1/j1...
TRANSCRIPT
DESIGNED &
MANUFACTURED IN INDIA
PCI & PCIe interfaces on the same board
Supports SS7 signaling
Hardware based Echo Cancellation
Fully PCI 2.2/PCIe compliant
Simple Installation: No additional DAHDI patch required
INTERCHANGEABLE E1/T1 PRI CARD
(PCI/PCIe)4 Ports
FreeSWITCH
FREEDOM TO COMMUNICATE I n tu i t i ve Te lephony
Certified by
Also works with
TM
TM TM TM
TMTM
First of its kind in the industry, our card allows you to switch from PCI to PCIe interface simply
by flipping the daughter board attached to it. The card is available in 4 ports only.
The card is manufactured with the highest quality components and PCB in our fully automatic
Surface Mount Technology factory.
TM TMALLO supports the Asterisk community and has opted NOT to copy the Digium PCI ID, like
TMother manufacturers do unlawfully and against the will of Digium . For you, the customer, this
TMmeans you are buying a card which will continue to work with DAHDI when Digium , the owner
TMof Asterisk , decides to change their code in order to block the rogue manufacturers. Use our
patched DAHDI version provided.
Should you choose to purchase the optional Line Echo Cancellation module which uses the
TMindustry standard Octasic DSP, you will also receive for FREE our Conference Room
Software. Once installed, the software allows you to set up, schedule and manage conferences
which are MIXED IN THE Octasic DSP.
Hardware conference mixing is much more superior in sound quality and won't use any CPU
resources.
Finally, all our 2nd generation cards are sold with the ALLO Card Installation Software. If you
decide to use it, the card installation and configuration will be quick and easy, no more
commands. Check below the access to the DEMO GUI of the ALLO Card Installation Software
and Conference Room Software.
TM
For more information please contact
Canada: +1 778 892 2877 [email protected]: +91 80 67080808
|
SS7 Signaling supported.
4 E1/T1/J1 ports with PCI/PCIe interface for high
performance voice applications.
PCI and PCIe interfaces on same card.
Optimized per channel DMA streams and
hardware-level HDLC handling unload the host
CPU.TMOptional Octasic DSP Echo Cancellation
Module 128ms tail/channel (on all channel
densities).
PRI Switch Compatibility: Euro ISDN, Network or
CPE, AT&T 4ESS, CAS Voice Modes.TM TMInteroperable with Asterisk , Freeswitch ,
TM TM TM TMYATE , Elastix , Trixbox , FreePBX ...
Key Features
Dual core processor
2 GB RAM
Available PCI/PCIe slot
Minimum Hardware Requirment(120 concurrent calls)
Up to 4 E1/T1/J1 ports with optimum PCI and
PCI-Express interface for high performance
voice and data applications.
TDM channel alignment in hardware (instead of
software), for greater voice integrity and
reliability.
Interrupts frequency adjustment.TMOptional Octasic DSP Echo Cancellation
Module 128ms tail/channel (on all channel
densities).
Hardware-level HDLC handling to reduce the
load on the host CPU
Fully PCI 2.2/PCIe(x1) compliant.
Auto sense compatibility with 5V and 3.3V PCI
busses.
Same base PCI interface card; fully compatible
with commercially available motherboards -
proper PCI-standard interrupt sharing without
manual tuning.
32-bit bus master DMA data exchanges across
PCI interface at 132 M bytes/sec for minimum
host processors intervention.
DMA based data transfer for minimum host
intervention and guaranteed data integrity on
high volume systems.
TDM clocking mode selectable as Slave or
Master.
Tech Specs