intel® visual compute accelerator (intel® vca) quick start guide · metal_xxx.img – check...

16
QUICK START GUIDE VCA Intel — VISUAL COMPUTE ACCELERATOR

Upload: others

Post on 21-Oct-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

  • VCAIntel — VISUAL COMPUTE ACCELERATOR

    QUICK START GUIDE

  • OverviewThe Intel® Visual Compute Accelerator (Intel VCA) PCIe* add-in card is designed to accelerate media and graphics workloads. The card is a full-length, full-height, double-width x16 card, which generally fits into 2U rack-mount servers and some custom 1U rack-mount servers. Contact the OEM to ensure the card is supported for the given server system. The card contains three discrete single-socket Intel® Xeon® E3 processor-based servers, each of which supports up to 32 GB of DDR3 memory - 96 GB total memory per card.

    All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product specifications and roadmaps.

    No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.

    Copies of documents that have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by visiting Intel’s website at http://www.intel.com/design/literature.htm.

    Intel and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

    *Other names and brands may be claimed as the property of others.

    Copyright © 2016 Intel Corporation. All rights reserved.

    2

    http://www.intel.com/design/literature.htm

  • Regulatory informationThis device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: • This device may not cause harmful

    interference. • This device must accept any interference

    received including interference that may cause undesired operation.

    Safety informationEN Important safety instructions

    Read all caution and safety statements in this document before performing any of the instructions. See Intel® Server Boards and Server Chassis Safety Information at: http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.

    DE Wichtige Sicherheitshinweise

    Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu Intel®-Serverplatinen und -Servergehäusen unter: http://www.intel.com/support/de/motherboards/server/sb/cs-010770.htm.

    3

    http://www.intel.com/support/motherboards/server/sb/cs-010770.htmhttp://www.intel.com/support/motherboards/server/sb/cs-010770.htmhttp://www.intel.com/support/de/motherboards/server/sb/cs-010770.htmhttp://www.intel.com/support/de/motherboards/server/sb/cs-010770.htm

  • ES Instrucciones de seguridad importantes

    Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar cualquiera de las instrucciones. Vea Intel® Server Boards and Server Chassis Safety Information en: http://www.intel.com/support/sp/motherboards/server/sb/cs-010770.htm.

    FR Consignes de sécurité

    Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce document avant de suivre toute instruction. Consultez Intel® Server Boards and Server Chassis Safety Information rendez-vous sur le site: http://www.intel.com/support/fr/motherboards/server/sb/cs-010770.htm.

    ZH-CN

    http://www.intel.com/support/cn/motherboards/server/sb/cs-010770.htm

    4

    http://www.intel.com/support/sp/motherboards/server/sb/cs-010770.htmhttp://www.intel.com/support/sp/motherboards/server/sb/cs-010770.htmhttp://www.intel.com/support/cn/motherboards/server/sb/cs-010770.htm. http://www.intel.com/support/cn/motherboards/server/sb/cs-010770.htm. http://www.intel.com/support/fr/motherboards/server/sb/cs-010770.htmhttp://www.intel.com/support/fr/motherboards/server/sb/cs-010770.htm

  • Certification marks

    WarningElectrostatic discharge (ESD) protection: ESD can damage disk drives, boards, and other parts. We recommend that you perform all of these procedures at an ESD workstation. If an ESD workstation is not available, provide some ESD protection by wearing an antistatic wrist strap attached to any unpainted metal surface on your server’s chassis ground whenever handling parts.

    Kit contents• Intel VCA card• Cosmetic cover• This Quick Start Guide

    Note: No cables are included in the kit. You will need to order cabling separately.

    20

    5

  • Hardware install1. The Intel VCA card supports up to two

    slots of memory (8 GB or 16 GB) per CPU, for a total of 96 GB maximum (32 GB per CPU). The Intel VCA card ships with the cosmetic cover uninstalled. If you want to change the memory configuration, install DDR3 ECC SODIMM modules (Figure 1). For a list of tested DDR3 ECC SODIMM, visit http://www.intel.com/content/www/us/en/support/server-products/server-accessories/000016707.html

    Figure 1 Install memory

    install memory

    AF006969

    6

  • 2. Insert the DIMM vertically, ensuring that it is firmly latched in place (Figure 2). a. Carefully press the DIMM into its slot. b. Lock the retaining clips into place.

    Figure 2 Install DIMM

    7

  • 3. Place the cosmetic cover over the card (Figure 3).

    Figure 3 Place cover over the card

    AF006970

    8

  • 4. Slide the cover a half-inch (11 to 12 mm) to the left to lock it in place, then tighten the screw (Figure 4).

    Figure 4 Slide the cover a half-inch to the side

    AF006971

    AF006972

    9

  • 5. Install the Intel VCA into an x16 PCIe* add-in card slot (Figure 5).

    Figure 5 Install Intel VCA

    B

    PCIe*connector

    AF007019

    C

    removeblank panels

    A

    10

  • 6. Add auxiliary power to the card (Figure 6).

    7. If necessary, add custom duct to ensure airflow is directed at the PCIe* card.

    Figure 6 Auxiliary power

    AF006973

    to motherboard

    11

  • Removing the DIMMIf you need to return the card, remove any DIMM you may have installed before shipping the card to Intel (Figure 7).1. Remove the cosmetic cover from the card.2. Unlock the retaining clip.3. Carefully lift free from the DIMM notch.4. Remove the DIMM.

    Figure 7 Remove memory

    12

  • Software installThe system software framework requires CentOS 7.1 on the Host, and CentOS 7.1 running in RAMDisk on each of the discrete single-socket Intel® Xeon® E3 processor-based servers.1. Copy the following files to the host:

    – kernel-3.10.0_#kernel_build_number#.VCA-1.x86_64.rpm

    – daemon-vca-#vca_build_number#-0.x86_64.rpm

    – vcass-modules-3.10.0-#kernel_build_number#.VCA-#vca_build_number#-0.x86_64.rpm

    – vca_baremetal_#vac_build_number#.img

    Note: You can download these files from https://downloadcenter.intel.com/download/25596/ or from one of the links in the For more information section at the end of this document.

    2. Update the kernel: sudo yum -y localinstall --disablerepo=* kernel-3*rpm

    3. Install the daemon: sudo yum -y localinstall --disablerepo=* daemon-vca*rpm

    13

    https://downloadcenter.intel.comhttps://downloadcenter.intel.com

  • 4. Install the modules: sudo yum -y localinstall --disablerepo=* vcass-modules*rpm

    5. Update boot to the new kernel: sudo grub2-set-default 0

    6. Reboot system: sudo reboot – Boot image: vcactl boot vca_bare-

    metal_XXX.img – Check status: vcactl status Note: Repeat until the status shows

    net_device_ready for all nodes. 7. Verify connection to one node:

    a. For software package 1.0, use:ssh [email protected]

    b. For Software Package 1.2 or later, ‘If bridging is enabled, IP address may be defined by DHCP server instead of the configuration file

    Note: Password = vista1. For other nodes, change the third octet in the IP address.

    The booted image is not persistent by default. Refer to the user guide for instructions on how to make changes persistent across boots.

    14

  • For more information For more information on Intel VCA, visit: www.intelserveredge.com/intelvca.

    For technical documents, visit: http://www.intel.com/support/GO/visual-accelerator.

    For the latest download, visit: https://downloadcenter.intel.com/product/87380.

    For information and software download of Intel® Media Server Studio, visit: https://software.intel.com/en-us/intel-media-server-studio.

    For warranty information, visit :http://www.intel.com/content/www/us/en/support/services/000005886.html.

    Please recycle

    15

    http://www.intelserveredge.com/intelvcahttp://www.intelserveredge.com/intelvcahttp://www.intel.com/support/GO/visual-acceleratorhttp://www.intel.com/support/GO/visual-acceleratorhttps://downloadcenter.intel.com/product/87380https://downloadcenter.intel.com/product/87380https://software.intel.com/en-us/intel-media-server-studiohttps://software.intel.com/en-us/intel-media-server-studiohttp://www.intel.com/content/www/us/en/support/services/000005886.htmlhttp://www.intel.com/content/www/us/en/support/services/000005886.html

  • H90575-003