integralinetm high performance liner...
TRANSCRIPT
IntegraLineTM
High Performance
Liner System
Secure the Integrity of Your Well in Critical Applications
© 2015 Weatherford. All rights reserved.
Liner System Portfolio Snapshot
1 WELL CONSTRUCTION, LINER SYSTEMS
WEL
L C
OM
PLE
XIT
Y
PER
FOR
MA
NC
E R
ATIN
GS
IntegraLineTM
TruFormTM
P-Series
C-Series
AxiomTM
HP/
HT,
Dee
p W
ater
, ER
D, D
rill
Do
wn
M
atu
re F
ield
s,
Shal
low
15,000 psi 400°F
5,000 psi 250°F
V3 VO ISO Rating
© 2015 Weatherford. All rights reserved.
IntegraLineTM System
3 WELL CONSTRUCTION, LINER SYSTEMS
SwageSet Polished Bore Receptacle
© 2015 Weatherford. All rights reserved.
IntegraLineTM System
4 WELL CONSTRUCTION, LINER SYSTEMS
SwageSet or SwageSeal packer
© 2015 Weatherford. All rights reserved.
IntegraLineTM System
5 WELL CONSTRUCTION, LINER SYSTEMS
IntegraLine liner hanger
© 2015 Weatherford. All rights reserved.
IntegraLineTM System – SwageSet PBR
6 WELL CONSTRUCTION, LINER SYSTEMS
Connects to the top of the SwageSet or SwageSeal liner-top packer
Protects running tools when deployed
Provides a sealing surface for tieback seal stems
Standard length of 20 ft
© 2015 Weatherford. All rights reserved.
IntegraLineTM System – Liner Top Packer
7 WELL CONSTRUCTION, LINER SYSTEMS
SwageSeal Packer
SwageSet Packer
Run as an integral part of the liner-hanger assembly, the packers form a permanent, anti-extrusion seal at the liner top to isolate gas migration, perform high-pressure stimulation treatments, and tie back completions in high-angle, horizontal, and extended-reach wells both onshore and offshore.
© 2015 Weatherford. All rights reserved.
Exclusive Design Features
8 WELL CONSTRUCTION, LINER SYSTEMS
Before Setting Patented
SwageSet element
High-torque, one-piece mandrel
Integral body lock rings
Aflas® elastomers
Aflas is a registered trademark of the Asahi Glass Co., Ltd.
© 2015 Weatherford. All rights reserved. 9 WELL CONSTRUCTION, LINER SYSTEMS
Exclusive Design Features After Setting
Patented SwageSet element
High-torque, one-piece mandrel
Integral body lock rings
Aflas® elastomers
Aflas is a registered trademark of the Asahi Glass Co., Ltd.
© 2015 Weatherford. All rights reserved.
SwageSet / SwageSeal Comparison
10 WELL CONSTRUCTION, LINER SYSTEMS
SwageSet SwageSeal
Yes ISO 14310 / API 11 D1 V0 validated Yes
15,000 psi @ 400°F Max Pressure Rating 12,500 psi @ 400°F
Yes Hold-down Slips No
Yes Cemented Liner Applications Yes
Yes Uncemented Liner Applications Limited
Yes Integral Cementing Pack-off Profile Yes
Pin Bottom Connection Type Box
Aflas Standard Elastomer Package Aflas
72 in. Typical Body Length 48 in.
10 Number of Machined Parts 4
© 2015 Weatherford. All rights reserved.
IntegraLineTM System – Liner Hanger
13 WELL CONSTRUCTION, LINER SYSTEMS
IntegraLineTM high performance liner hanger HPHT rated version of proven WPHR (400F and 15,000 psi)
Protected slips for run-in
High hanging capacity
Liner Casing Pressure (psi) Temperature (F)
4.5 in. (13.5 to 15.1 lb/ft) 7 in. (32 to 38 lb/ft) 15,000 400
7 in. 9.625 in. (47 to 53.5 lb/ft) 13,500 400
9.625 in. 13.375 in. (68 to 72 lb/ft) 12,500 400