integral ii - boston light source · integral ii integral ballast t5, t5/ho & t8 linear...

Integral II Integral Ballast T5, T5/HO & T8Linear Fluorescent

For additional

configurations see

our Product Catalog or

visit us online at

www.winonalighting.com

Linear Wall & Ceiling

Cantilever

Pendant

Available forT5, T5/HO,

2x T5/HO & T8Sources

WINDIRECT TM

Integral II...Windirect introduces Integral II to our extensiveline of extruded asymmetric high performance linear fluorescent products. Use this new product in either indoor or outdoor applications. It combinessuperior performance, sleek design and ruggedconstruction to form a simple solution for integralballast luminaires.

6”(153mm)

Actual Size

ExtrudedAluminumHousing

Extruded High-

PerformanceSpecularReflector

Silicone Gasket Seal forWeather Proof

Application

Captive Hinge with

Clear AcrylicLens

1-800-328-5291 • 507-454-5113 (MN) • FAX 507-452-8528 • www.winonalighting.comWinona Lighting • 3760 West Fourth Street • Winona, MN 55987- All fixtures U.L. listed, (USA & Canada). © Copyright 2007

Integral Ballast

Snap-lock Hinge Provides

Consistent Seal

• Extruded Asymmetric Performance Reflector

• Extruded Aluminum Housing

• Multiple Sources Available: T5, T5/HO, Two-Lamp Cross Section T5/HO

• Cantilever Mount, Pendant Mount, Surface Linear Mount

• Clear Virgin Acrylic Lens Integrated with Extruded Aluminum Captive Hinge Design

• Indoor/Outdoor

• Captive Lens Design

I N T E G R A L I I F E A T U R E S

2

Patent Pending

Integral Ballast Linear Fluorescent


The unique interlockinghinge design allowseasy access while posi-tively sealing againstmoisture for long lifeoutdoor performance.

H I G H P E R F O R M A N C E F E A T U R E S

180° 160° 140°

110°

90°

12 ‘

180° 160° 140°

110°

90°

12 ‘

180° 160° 140°

110°

90°

12 ‘

(1)F32wT8 • 1273 Peak • 65.8% Efficiency

(1)F54wT5/HO • 2539 Peak • 64.0% Efficiency

(2)F54wT5/HO • 4175 Peak • 74.7% Efficiency

SIK1 Mount SIS8 Mount

SICD Mount SIP Mount

SIS1 Mount

SIK8 Mount

Integral Ballast Linear Fluorescent

3

6"(153mm)

5-1/8"(140mm)

4-5/16"(110mm)7-1/4"

(185mm)11-1/16"(282mm)

SIK1: Knuckle Wall Mount (Integral Ballast)

6"(153mm)

5-1/8"(140mm)

7-1/4"(185mm)

11-1/16"(282mm)

SIS1: Simple Wall Mount(Integral Ballast)

This catalog page is available online.

S P E C I F I C A T I O N S

SGW: Semi-GlossWhite

SGB: Semi-GlossBlack

ALP: Aluminum Paint(matte finish)

LGP: Light GoldIridescent(gloss finish)

PBP: Pale BronzePaint(gloss finish)

SPF: (STD)Standard PaintedFinish to be determined

CPF: (MOD)Custom PaintedFinish

X: No Options

IB: Internal Baffle

EM: EmergencyBattery (not availablefor 2’ and 3’ lengths)

SO: (MOD)Special Option

DM: Dimming Ballast(T5/HO only)

STD: Indicateonly when specifying a standard.

MOD: Indicatewhen specifyingany modification.

IndoorLocations:(damp label)

SI: SmallIntegral

OutdoorLocations:(wet label)

SIW: SmallIntegralWet

124T8136T8148T8160T8272T8296T8

select one124T5 or 124T5/HO136T5 or 136T5/HO148T5 or 148T5/HO160T5 or 160T5/HO272T5 or 272T5/HO296T5 or 296T5/HO

224T5/HO236T5/HO248T5/HO 260T5/HO 472T5/HO496T5/HO

Integral Ballast

PHOTOMETRY

F54wT5/HORefer to TechnicalSection for detailedPhotometry Reports.

Report #13121

Wall Mount: Knuckle

SIK1 (Single)SIK1L (Left End)SIK1R (Right End)SIK1I (Intermediate)

Wall Mount: Simple

SIS1 (Single)SIS1L (Left End)SIS1R (Right End)SIS1I (Intermediate)

Profile - P1 (basic): Anodized, extrudedaluminum specular reflector with extrudedaluminum housing and solid aluminumendcaps and stainless steel hardware.Extruded aluminum visors are combinedwith P1 basic profile to create P2, P3 &*P5 profiles.

Type - Small profile with smooth detail.Indoor; non-gasketed, captive extrud-ed aluminum with window cut-out forregressed lens.Outdoor; silicone gasketed lens, captiveextruded aluminum door with windowcutout for regressed lens.Lens; clear acrylic lens provided for both indoor and outdoor applications. Mounting - fully adjustable and lockablemachined aluminum knuckle connects profile to mounting plate standoff tubes tocreate a clean appearance.

Performance - Asymmetric distributionprovides a concentration of light on targetsurface for smooth illumination.

Electrical - Electronic, HPF ballast, lampprotection circuit, Class P and thermallyprotected. The minimum number of ballasts will be used. Provide 90°C supplywire.

Finishes - An electrostatically applied wetpaint system utilizes a multi-stage processto provide a durable acrylic enamel finish.Suitable for indoor and outdoor applica-tions.

Options - For complete list and detaileddescriptions, refer to Options Section.

Refer to mounting codesbelow and on oppositepage for how to specifysingle and multiple fix-ture applications.

P1(basic)

P2(solid)

P3(perforated)

*P5(short)

LAMP SIZE APPLICATIONINDOOR | OUTDOOR

TYPE

Fluorescent Small Integral II LinearFluorescent WINDIRECT TM


Note: *P5 (short visor) does not provide the same sightline shielding as the P2 or P3 visors (see options section for details). T8, T5 and T5/HO lamps perform poorly in temperatures below 50°F.

SURF

ACE

SURF

ACE

LINEA

RLIN

EAR

MOD

IFIED

STAN

DARD

FINIS

HES

OPTI

ONS

TECH

NICA

LSU

RFAC

EW

ALL

SURF

ACE

CEILI

NGSE

MI-

RECE

SSED

COVE

PEND

ANT

CANT

ILEVE

RBA

SEM

OUNT

TRUS

S

P5 - SI - 136T5/HO - 277V - SIK1 - SGW - X - STD P5 - SI - 136T5/HO - 277V - SIS1 - SGW - X - STD

- - - - - - -

Ceiling Mount: KnuckleSIK8 (Single)SIK8L (Left End)SIK8R (Right End)SIK8I (Intermediate)

Ceiling Mount: SimpleSIS8 (Single)SIS8L (Left End)SIS8R (Right End)SIS8I (Intermediate)

P1 Basic P2 Solid P3 Perforated *P5 Short

4

CLASSP2 SI 136T5/HO 277V SIK1 SGW X STD

PROFILE TYPE LAMPING VOLTAGE120V or 277V

MOUNTING FINISH OPTIONS

MOUNTING DETAILS: Integral Ballast - SIK Knuckle Mounts


SIK1I or SIK8I(intermediate)

SIK1R or SIK8R(right hand)

SIK1L or SIK8L(left hand)

L L L

3-5/16"(84mm)

3-5/16"(84mm)

INDOOR | OUTDOORLAMPSIZE APPLICATION

Small Integral II Linear FluorescentFluorescent WINDIRECT TM


SURFACELINEAR

SURFACELINEAR

COVEPENDANT

CANTILEVERSEM

I-RECESSED

SURFACECEILING

SURFACEW

ALLBASE

MOUNT

TRUSSMODIFIEDSTANDARD

FINISHESOPTIONS

TECHNICAL

P1(basic)

INDIVIDUAL LEFT/RIGHT INTERMEDIATELAMP LAMP LAMP ACTUAL ACTUAL ACTUAL WEIGHT

SELECTION CODE DESCRIPTION LENGTH L LENGTH L/R LENGTH L LBS.

Note: T8, T5 and T5/HO lamps perform poorly in ambient temperatures below 50° F.

One Lamp

(cross section)

OneLamp

(cross section)

Two Lamp

(cross section)

124T8136T8148T8160T8272T8296T8



1-F17W/T81-F25W/T81-F32W/T81-F40W/T82-F25W/T82-F32W/T8

1-F14W/T5 or 24W/T5/HO1-F21W/T5 or 39W/T5/HO1-F28W/T5 or 54W/T5/HO1-F35W/T5 or 80W/T5/HO2-F21W/T5 or 39W/T5/HO2-F28W/T5 or 54W/T5/HO

2-24W/T5/HO2-39W/T5/HO2-54W/T5/HO2-80W/T5/HO4-39W/T5/HO4-54W/T5/HO

333⁄8" 267⁄8" 3013⁄16" 269⁄16" 281⁄4" 261⁄4" 8 lbs.453⁄8" 387⁄8" 4213⁄16" 389⁄16" 401⁄4" 381⁄4" 11 lbs.573⁄8" 507⁄8" 5413⁄16" 509⁄16" 521⁄4" 501⁄4" 15 lbs.693⁄8" 627⁄8" 6613⁄16" 629⁄16" 641⁄4" 621⁄4" 19 lbs.821⁄8" 755⁄8" 799⁄16" 755⁄16" 77" 75" 22 lbs.

1061⁄8" 995⁄8" 1039⁄16" 995⁄16" 101" 99" 30 lbs.

3113⁄16" 255⁄16" 291⁄4" 25" 2611⁄16" 2411⁄16" 8 lbs.435⁄8" 371⁄8" 411⁄16" 3613⁄16" 381⁄2" 361⁄2" 11 lbs.557⁄16" 4815⁄16" 527⁄8" 485⁄8" 505⁄16" 485⁄16" 15 lbs.671⁄4" 603⁄4" 6411⁄16" 607⁄16" 621⁄8" 601⁄8" 19 lbs.785⁄8" 721⁄8" 761⁄16" 7113⁄16" 731⁄2" 711/2" 22 lbs.

1021⁄4" 953⁄4" 9911⁄16" 957⁄16" 971⁄8" 951⁄8" 30 lbs.

3113⁄16" 255⁄16" 291⁄4" 25" 2611⁄16" 2411⁄16" 8 lbs.435⁄8" 371⁄8" 411⁄16" 3613⁄16" 381⁄2" 361⁄2" 11 lbs.557⁄16" 4815⁄16" 527⁄8" 485⁄8" 505⁄16" 485⁄16" 15 lbs.671⁄4" 603⁄4" 6411⁄16" 607⁄16" 621⁄8" 601⁄8" 19 lbs.785⁄8" 721⁄8" 761⁄16" 7113⁄16" 731⁄2" 711/2" 22 lbs.

1021⁄4" 953⁄4 9911⁄16" 957⁄16" 971⁄8" 951⁄8" 30 lbs.

SIK1 or SIK8(single)

L

3-5/16"(84mm)

3-5/16"(84mm)

SIS1(wall mount)

SIS8(ceiling mount)

SIK1(wall mount)

11-1/16"(282mm)

7-1/4"(185mm)

SIK8(ceiling mount)

SIS1 SIK1 SIS1L/R SIK1L/R SIS1I SIK1I

11-1/16"(282mm)

7-1/4" (185mm)

MOUNTING DETAILS: Integral Ballast - SIS Simple Mounts

SIS1I or SIS8I(intermediate)

SIS1R or SIS8R(right hand)

SIS1L or SIS8L(left hand)

L L L

2-9/16"(65mm)

2-9/16"(65mm)

2-9/16"(65mm)

SIS1 or SIS8(single)

2-9/16"(65mm)

L

5






LGP: Light GoldIridescent (gloss finish)

PBP: Pale BronzePaint (gloss finish)



X: No Options

IB: Internal Baffle




STD:Indicate onlywhen specifyinga standard.

MOD:Indicate when specifying any modification.


SI: SmallIntegral


SIW: SmallIntegralWet

SICU(single)

SICUL(left hand)

SICUI(intermediate)

SICUR(right hand)

Integral Ballast

Profile - P1 (basic): Anodized,extruded aluminum specular reflectorcontained within extruded aluminumhousing with solid aluminum end-caps and stainless steel hardware.Optional extruded aluminum visorcan be combined with the P1 profileto create a P5 profile.

Type - Small profile with smoothdetail. Indoor; non-gasketed, captiveextruded aluminum door with window cut-out for regressed lens.Outdoor; silicone gasketed lens,captive extruded alum. door with

window cut-out for regressed lens.Lens; clear acrylic lens provided for both indoor and outdoor applications.

Mounting - Available as a Single fixture or Left, Right and Intermediatemount. Fixtures may be joinedtogether with aimable, lockable hubsto form a continuous row.

Performance - Asymmetric distri-bution provides a concentration oflight on target surface for smoothillumination. Maximum candlepoweraimed 20° above nadir has less than

5% spill light within the 0-20° zoneand less than 2% spill light withinthe 90°-180° zone.

Electrical - Integral, electronic, HPFballast, end of lamp life protection circuit, less than 10% THD, Class Pthermally protected. Provide 90°Csupply wire.

Finishes - An electrostaticallyapplied automotive wet paint systemutilizes a multi-stage process to pro-vide a durable acrylic enamel finish.

Options - See below specificationworksheet for a complete list ofoptions for this product.

LAMP SIZE APPLICATIONINDOOR | OUTDOOR

TYPE

Fluorescent Small Integral II CantileverFluorescent WINDIRECT TM



CANT

ILEVE

R M

ODIFI

ED

STAN

DARD

TR

USS

FIN

ISHE

S OP

TION

S TE

CHNI

CAL

SURF

ACE

WAL

L SU

RFAC

E CE

ILING

SE

MI-

RECE

SSED

SU

RFAC

E LIN

EAR

COVE

PE

NDAN

T BA

SE

MOU

NT

P1 - SI - 136T5/HO - 120V - SICD - SGW - X - STD

P1 Basic P5 Short

P1(basic)

P5(short)

- - - - - - -

PHOTOMETRY

F54wT5/H0Refer to TechnicalSection for detailedPhotometry Reports.

Report #13122

124T8136T8148T8160T8272T8296T8



18"(459mm)

5-1/2"(140mm)

4-1/4"(108mm)

20-1/4"(516mm)

Max

CP.

@16

0°

50°

Max CP. @

20°

50°

SICD(single)

SICDL(left hand)

SICDI(intermediate)

SICDR(right hand)

SICU Mount - (up position wall wash)

SICD Mount - (down position wall wash)

6

CLASSP2 SI 136T5/H0 277V SICU SGW X STD



MOUNTING DETAILS: Integral Ballast - SIC Mounts


WINDIRECT TM

SICU or SICD(single)

2-3/4"(70mm)

2-3/4"(70mm)

L

SICUI or SICDI(intermediate)

SICUR or SICDR(right hand)

SICUL or SICDL(left hand)

L L L

2-3/4"(70mm)

2-3/4"(70mm)

P1(basic)

LAMP LAMP LAMP ACTUAL ACTUAL ACTUAL WEIGHTSELECTION CODE DESCRIPTION LENGTH L LENGTH L LENGTH L LBS.

INDOOR | OUTDOORLAMPSIZE APPLICATION

Small Integral II Cantilever FluorescentFluorescentWINDIRECT TM


CANTILEVER COVE

PENDANT SEM

I- RECESSED

SURFACE LINEAR

SURFACE CEILING

SURFACE W

ALL BASE

MOUNT

MODIFIED STANDARD

FINISHES OPTIONS

TECHNICAL TRUSS


One Lamp

(cross section)

OneLamp

(cross section)

Two Lamp

(cross section)

124T8136T8148T8160T8272T8296T8



SICU or SICD SICUL/SICUR SICUI or SICDISICDL/SICDR

1-F17W/T81-F25W/T81-F32W/T81-F40W/T82-F25W/T82-F32W/T8



333⁄4" 31" 281⁄4" 8 lbs.453⁄4" 43" 401⁄4" 11 lbs.573⁄4" 55" 521⁄4" 15 lbs.693⁄4" 67" 641⁄4" 19 lbs.821⁄2" 793⁄4" 77" 22 lbs.1061⁄2" 1033⁄4" 101" 30 lbs.

323⁄16" 297⁄16" 2611⁄16" 8 lbs.44" 411⁄4" 381⁄2" 11 lbs.

5513⁄16" 531⁄16" 505⁄16" 15 lbs.675⁄8" 647⁄8" 621⁄8" 19 lbs.

79" 761⁄4" 731⁄2" 22 lbs.1025⁄8" 997⁄8" 971⁄8" 30 lbs.

323⁄16" 297⁄16" 2611⁄16" 8 lbs.44" 411⁄4" 381⁄2" 11 lbs.

5513⁄16" 531⁄16" 505⁄16" 15 lbs.675⁄8" 647⁄8" 621⁄8" 19 lbs.

79" 761⁄4" 731⁄2" 22 lbs.1025⁄8" 997⁄8" 971⁄8" 30 lbs.

SICU Mount - (up position wall wash) SICD Mount - (down position wall wash)

7

Profile - P1 (basic): Anodized,extruded aluminum specularreflector contained within extrudedaluminum housing with solid alu-minum endcaps and stainlesssteel hardware. Optional extrudedaluminum visors are combinedwith the P1 profile to create P2,P3 and *P5 profiles.

Type - Small profile with smoothdetail.Indoor; non-gasketed, captiveextruded aluminum door withwindow cut-out for regressedlens.Outdoor; silicone gasketed lens,captive extruded aluminum doorwith window cut-out for regressedlens.Lens; clear acrylic lens provided for both indoor and outdoor applications.






LGP: Light GoldIridescent(gloss finish)

PBP: Pale BronzePaint (gloss finish)



X: No Options

IB: Internal Baffle




STD:Indicate onlywhen specifyinga standard.

MOD:Indicate when specifying any modification.


SI: SmallIntegral


SIW: SmallIntegralWet SIP

(single)

SIPL(left hand)

SIPI(intermediate)

SIPR(right hand)

Integral Ballast

PHOTOMETRY

F54wT5/HORefer to TechnicalSection for detailedPhotometry Reports.

Report #13121

LAMP SIZE APPLICATION TYPE

Fluorescent Small Integral II PendantFluorescent WINDIRECT TMPE

NDAN

TPE

NDAN

TM

ODIFI

EDST

ANDA

RDFIN

ISHE

SOP

TION

STE

CHNI

CAL

SURF

ACE

WAL

LSU

RFAC

ECE

ILING

SEM

I-RE

CESS

EDSU

RFAC

ELIN

EAR

COVE

CANT

ILEVE

RBA

SEM

OUNT

TRUS

S


Note: *P5 (short visor) does not provide the same sightline shielding as the P2, P3 or P4 visors (see options section for details)

P5 - SI - 136T5/HO - 277V - SIP - SGW - X - STD

- - - - - - -

124T8136T8148T8160T8272T8296T8



P1(basic)

P2(solid)

P3(perforated)

*P5(short)

30"(765mm)

4-5/16"(110mm)

11-1/16"(282mm)

P1 Basic P2 Solid P3 Perforated *P5 Short

8

CLASSP2 SI 136T5/HO 277V SIP SGW X STD



INDOOR | OUTDOOR

Mounting - Machine aluminumaimable and lockable hub fittingare located at each end of thereflector and transition to rigidpipe stems. Round mount platesare hidden with cover pans.

Performance - Asymmetricdistribution provides a concen-tration of light on target surfacefor smooth illumination.Maximum candlepower aimed125° above nadir has less than5% spill light within the 0-125°zone and less than 2% spilllight within the 90-180° zone.

Electrical - Electronic, HPFballast, end of lamp life protectioncircuit, less than 10% THD,Class P and thermally protected.Provide 90° supply wire.

Finishes - An electrostaticallyapplied automotive wet paintsystem utilizes a multi-stageprocess to provide a durableacrylic enamel finish.

Options - See below specifi-cation worksheet for a com-plete list of options for thisproduct.

MOUNTING DETAILS: Integral Ballast - SIP Mounts


LAMPSIZE APPLICATION

Small Integral II Pendant FluorescentFluorescentWINDIRECT TMPENDANTPENDANT

COVECANTILEVER

SEMI-

RECESSEDSURFACE

LINEARSURFACECEILING

SURFACEW

ALLBASE

MOUNT

TRUSSMODIFIEDSTANDARD

FINISHESOPTIONS

TECHNICAL


SIPL(left hand)

SIPI(intermediate)

SIPR(right hand)

L L L

2-1/2"(64mm)

2-1/2"(64mm)

P1(basic)

LAMP LAMP LAMP ACTUAL ACTUAL ACTUAL WEIGHTSELECTION CODE DESCRIPTION LENGTH L LENGTH L LENGTH L LBS.


One Lamp

(cross section)

OneLamp

(cross section)

Two Lamp

(cross section)

124T8136T8148T8160T8272T8296T8



SIP SIPL, SIPR SIPI1-F17W/T81-F25W/T81-F32W/T81-F40W/T82-F25W/T82-F32W/T8



331⁄4" 303⁄4" 281⁄4" 8 lbs.451⁄4" 423⁄4" 401⁄4" 11 lbs.571⁄4" 543⁄4" 521⁄4" 15 lbs.691⁄4" 663⁄4" 641⁄4" 19 lbs.

82" 791⁄2" 77" 22 lbs.106" 1031⁄2" 101" 30 lbs.

3111⁄16" 293⁄16" 2611⁄16" 8 lbs.431⁄2" 41" 381⁄2" 11 lbs.555⁄16" 5213⁄16" 505⁄16" 15 lbs.671⁄8" 645⁄8" 621⁄8" 19 lbs.781⁄2" 76" 731⁄2" 22 lbs.1021⁄8" 995⁄8" 971⁄8" 30 lbs.

3111⁄16" 293⁄16" 2611⁄16" 8 lbs.431⁄2" 41" 381⁄2" 11 lbs.555⁄16" 5213⁄16" 505⁄16" 15 lbs.671⁄8" 645⁄8" 621⁄8" 19 lbs.781⁄2" 76" 731⁄2" 22 lbs.1021⁄8" 995⁄8" 971⁄8" 30 lbs.

2-1/2"(64mm)

2-1/2"(64mm)

SIP(single)

L

9

INDOOR | OUTDOOR

Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

��18"

WA

LL

163 167 163 167 163

192 195 193 196 192

142 143 143 143 142

106 106 107 106 106

75 75 76 75 75

53 53 54 53 53

38 39 39 39 38

29 29 30 29 29

22 23 23 23 22

Avg = 92 Max/Min =8.9Max = 195 Max/Avg =2.1Min = 22 Tilt = -7°

Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

��24"

123 125 124 125 123

158 160 159 160 158

133 135 134 135 133

107 107 108 107 107

86 86 86 86 86

64 65 65 65 64

48 49 49 49 48

37 38 38 38 37

29 30 31 30 29


Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

��48"

123 125 124 125 123

158 160 159 160 158

133 135 134 135 133

107 107 108 107 107

86 86 86 86 86

64 65 65 65 64

48 49 49 49 48

37 38 38 38 37

29 30 31 30 29


Illuminances are based on initial footcandles at mid point of wall illuminated by a continuous row of six fixtures. Reflectances: 80/50/20.

Certified Reports by Building Acoustics & Lighting Laboratory, Inc. - Fenton, MO.

SURF

ACE

WAL

LSU

RFAC

ECE

ILING

SEM

I-RE

CESS

EDSU

RFAC

ELIN

EAR

COVE

PEND

ANT

CANT

ILEVE

RBA

SEM

OUNT

TECH

NICA

LM

ODIFI

EDST

ANDA

RDTR

USS

FINIS

HES

OPTI

ONS

Fluorescent Photometry & ApplicationsFluorescent


Zonal Lumen Summary

4’ 4’ 4’

3’

1’ TYP.

1’

8’

BALL Report No.: 10944.0File Name: 10944.ies

Luminaire Description: 1/54WT5/HO lamp, 4’, fluorescentadjustable yoke wall mount luminaire, specular reflector, diffuseendplates, and open aperture.Lamp Tested: F54T5/HO

F54T5/HO (5000 lumens)Lamp Multipliers:

.58: F28T5 (2900 lumens)

Zone Lumens %Lamp %Fixture

90-120 1518 30.4 41.490-130 2216 44.3 60.590-150 3088 61.8 84.390-180 3632 72.6 99.1

0-90 32.0 0.6 0.9

0-180 3898 78.0 100.0 Total Luminaire

Candlepower Distribution

Download this and all ofour photometric reportsfrom our website underTech Info at www.winonalighting.com

Small

54WT5/HO

Uplight

PlaneAngle0 45 90 135 180

0 0 0 0 0 030 0 0 0 0 060 24 10 0 0 080 40 17 0 0 090 57 41 0 0 0

100 483 685 30 0 0105 1453 1536 89 0 0110 2506 1962 155 0 0115 2933 1914 233 0 0120 2790 1627 307 0 0125 2702 1421 385 5 0130 2216 1290 461 10 0135 1949 1336 544 12 8140 1624 1226 593 24 10145 1513 1148 655 28 15150 1434 1105 704 25 21160 1178 1034 786 98 28170 1041 1014 819 437 259180 820 820 820 820 820

Candlepower DistributionPlaneAngle

0 45 90 135 1800 162 162 162 162 162

10 850 642 146 58 5115 1014 839 152 58 4020 1190 995 134 37 2225 1220 1028 131 27 1930 1262 1078 117 19 1535 1196 1063 113 19 1940 1122 1057 104 19 1945 1043 1043 95 19 1650 863 896 80 13 060 716 602 54 0 070 617 471 28 0 080 488 338 10 0 090 263 164 0 0 0

100 83 24 0 0 0110 19 13 0 0 0120 16 0 0 0 0130 0 0 0 0 0180 0 0 0 0 0

180° 160° 140°

110°

90°

2933

Zonal Lumen Summary

9’

3’

1’

1’ TYP.

33 33 34 35 35 35 35 35 35 34 33 33

60 61 62 63 63 63 63 63 63 62 61 60

56 57 58 59 59 59 59 59 59 58 57 56

50 51 53 53 54 54 54 54 53 53 51 50

42 44 45 45 46 46 46 46 45 45 44 42

33 34 35 36 36 36 36 36 36 35 34 33

25 26 27 28 28 28 28 28 28 27 26 25

20 21 22 23 23 23 23 23 23 22 21 20

16 17 18 18 18 19 19 18 18 18 17 16

5’ 5’ 5’


Luminaire Description: 1/32W T8lamp, 4’, fluorescent adjustable yokeceiling mount luminaire, specularreflector, diffuse endplates, and openaperture.Lamp Tested: F32T8/RS

F32T8/RS (2950 lumens)


0-30 364 12.3 17.90-40 680 23 33.40-60 1370 46.4 67.20-90 1980 67.1 97.2

90-180 57 1.9 2.8

0-180 2037 69.1 100.0 Total Luminaire

Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

��12"

WA

LL

123 117 123 117 123

133 129 133 129 123

75 74 75 74 75

41 41 41 41 41

25 25 25 25 25

17 17 17 17 17

12 12 12 12 12

9 10 10 10 9

8 8 8 8 8Avg = 49 Max/Min =16.6Max = 133 Max/Avg =2.7Min = 8 Tilt = -11°

Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

��24"

70 69 70 69 70

99 97 99 97 99

86 86 86 86 86

62 62 62 62 62

42 42 42 42 42

28 29 29 29 28

20 21 21 21 20

15 16 16 16 15

12 12 12 12 12


Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

��30"

56 56 56 56 56

83 82 83 82 83

74 74 74 74 74

63 64 64 64 63

47 47 47 47 47

33 34 34 34 33

25 25 25 25 25

19 19 19 19 19

15 15 15 15 15


Download this and all of our photometricreports from our website under Tech Info atwww.winonalighting.com

1262

0° 20°

90°

60°

40°

Statistics: Catalog: P1-SS-148T8-SCK8-X-STD, Diffuser: Open Aperture, Luminaire Spacing: 4’ on Center, Setback: 3’, Grid Spacing: 1’ on Center, Reflections: 80 - 50 - 20, Tilt: -5 degree, Average: 39fc, Max: 63fc, Min: 16fc, Max/Min: 3.9:1, Max/Avg: 2.4:1

Statistics: Catalog: P1-SS-148T5HO-SCK1-X-STD,Diffuser: Open Aperature, Luminaire Spacing: 4’ on Center,Setback: 3’, Grid Spacing: 1’ on Center, Reflections: 80 - 50 - 20, Tilt: -4 degree, Average: 90fc, Max: 127fc, Min: 42fc, Max/Min: 3.0:1, Avg./Min: 2.1:1

Small

F32W/T8Wall Wash

10

Unlimited Custom Metallic

or Solid Color Choices

LGP

ALPSGB

SGW

PBP

5 StandardColors

COVEPENDANT

CANTILEVERSEM

I-RECESSED

SURFACELINEAR

SURFACECEILING

SURFACEW

ALLBASE

MOUNT

TRUSSTECHNICAL

MODIFIEDSTANDARD

FINISHESOPTIONS

Zonal Lumen Summary

8’

4’

1’ TYP.

1’

4’ 4’4’


Luminaire Description: 2/54W T5/HOlamp in cross-section, 4’, fluorescentadjustable yoke wall mount luminaire,specular reflector, diffuse endplates,and open aperture.Lamp Tested: (2) F54T5/HO

F54T5/HO (5000 lumens)Lamp Multipliers:

.58: F28T5 (2900 lumens)


90-120 3462 34.6 46.390-130 4456 44.6 59.690-150 5995 59.9 80.290-180 6962 69.6 93.2

0-90 511 5.1 6.3

Total Luminaire 0-180 7473 74.7 100.0

Consult factory for availability and how to specify.

Download this and all of our photometricreports from our website under Tech Info atwww.winonalighting.com

Small

2-54WT5/HO

Uplight


Small Integral II FluorescentFluorescentWINDIRECT TM

Finishes

Candlepower DistributionPlaneAngle

0 45 90 135 1800 0 0 0 0 0

30 0 0 0 0 060 12 0 0 0 080 1002 328 0 0 090 2198 1356 0 0 0

100 3597 2449 116 0 0105 3926 2611 188 0 0110 4175 2618 273 0 0115 4056 2381 370 0 0120 3532 2076 448 0 0125 3370 2109 552 0 0130 2965 1983 623 0 0135 2946 2079 735 20 0140 2451 2026 768 20 0145 2258 2121 829 21 17150 2439 2350 917 20 17160 2672 2397 954 56 29170 2284 1970 1065 447 221180 1026 1026 1026 1026 1026

Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

➤➤24"

WA

LL

198 198 198 198 198

348 349 350 349 348

218 218 218 218 218

162 163 163 163 162

123 123 124 123 123

96 96 96 96 96

75 75 75 75 75

65 65 65 65 65

54 54 55 54 54

Avg = 149 Max/Min = 6.5:1Max = 350 Max/Avg = 2.8:1Min = 54 Tilt = -10°

Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

➤➤36"

184 184 184 184 184

313 313 314 313 313

215 215 216 215 215

173 173 173 173 173

138 138 138 138 138

111 111 111 111 111

88 88 89 88 88

76 76 76 76 76

63 63 63 63 63

Avg = 151 Max/Min = 5.0:1Max = 314 Max/Avg = 2.4:1Min = 63 Tilt = -5°

Statistics

1’

2’

3’

4’

5’

6’

7’

8’

9’

➤➤42"

181 181 182 181 181

247 248 249 248 247

190 190 191 190 190

163 163 164 163 163

142 142 142 142 142

121 122 122 122 121

103 103 104 103 103

91 91 92 91 91

76 77 77 77 76

Avg = 146 Max/Min = 3.3:1Max = 249 Max/Avg = 1.9:1Min = 76 Tilt = 0°

180° 160° 140°

110°

90°

4175

Statistics: Catalog: P1-SS-248T5HO-SCK1-X-STD,Diffuser: Open Aperture, Luminaire Spacing: 4’ on CenterSetback: 4’, Grid Spacing: 1’ on Center, Reflections: 80 - 50 - 20, Tilt: -5 degree, Average: 115fcMax: 192fc, Min: 58fc, Max/Min: 3.3:1, Avg./Min: 2.0:1

STANDARD:SGW - Semi-Gloss WhiteSGB - Semi-Gloss BlackALP - Aluminum Paint (matte finish)LGP - Light Gold Iridescent (gloss finish)PBP - Pale Bronze Paint (gloss finish)

Windirect utilizes an electro-statically applied wet paint system in a multi-stage process to provide a durable and U.V. stable acrylicenamel finish suitable for indoor or outdoor conditions.

CPF – Custom Painted Finishes:Custom Painted Finishes are available on all fixture componentswithout additional cost or lead time. Add “MOD” designation to the end of catalog number when specifying.

Winona Lighting’s wet paint system allows maximum flexibility for matching or creating either custom metallic or solid colors.

CMF – Custom Metal Finishes:Custom Metal Finishes are available for architectural enclosuresand architectural pendants only. Add “MOD” designation at theend of catalog number.

• Polished Stainless Steel • Brushed Stainless Steel• Polished Brass • Brushed Brass• Antique Brass • Brushed Aluminum

11

All rights reserved© 2007 copyright

For complete information from all of Winona Lighting’s Product Divisionsvisit our website at www.winonalighting.com

• Full Catalogs• New Products• Photometric Information• Create-A-Spec• Installation Information

All information is fully downloadable

Winona Lighting on the web...start at www.winonalighting.com


Windirect is one of four distinctive product groups from Winona Lighting. All Winona Lighting products

are built with the highest quality materials and finishes in the industry. Look for our other catalogs or visit

our website for more information at: www.winonalighting.com

WINDIRECT TM

Windirect High Performance Asymmetric Lighting is the complete solution for indirect lighting projects of any size. Builtaround lamps ranging from T-3 Halogen to T-5 Fluorescent toBT-37 Pulse Start Metal Halide, there is a WIndirect luminaire forany application.

This extensive line of Decorative Standard Products includesPendants, Ceiling Mounts, Wall Mounts and Exterior luminaires.All Standard luminaires are designed with modification in mind,making it easy to create an individual design for your project. If a custom design is required, our Decorative Custom capabilitiesare unmatched in the industry.

Winscape features our line of high performance, specification-grade, indoor and outdoor low-voltage and line-voltage architectural and landscape luminaires. Machined from solid billets of aluminum, brass and stainless steel, our luminaires aremade to beautifully survive a lifetime of use.

Winona LED is proud to introduce three exciting new LED products: POPS!, Step Lights and V-Line Linear LED. It isWinona LED’s mission to be the leader in the development ofLED based products in forms that the industry recognizes. Ourvision is to provide one place to find LED products for virtuallyany architectural lighting requirement.

integral ii - boston light source · integral ii integral ballast t5, t5/ho & t8 linear...

Documents