insulated panels panel… · panels can be made in a variety of widths up to 36". •...

Insulated Panels Col-Met’s high-quality insulated panels are used in a wide range of applications including dry-off and curing ovens as well as environmentally controlled rooms. Insulated panels are constructed of 20-gauge prime aluminized steel and available in a wide range of thicknesses including 2", 3", 4", 6" and 8" based on application and insulating properties required. Col-Met insulated panels are rigidly constructed utilizing “knuckle” punch for attachment of the top and bottom connecting panels and a “button” punch along the tongue and groove surfaces. This assembly process provides superior strength while protecting the cosmetic appearance of the panels. Panels are shipped in a vertical orientation to facilitate the installation of insulation into the channel prior to interlocking the panels during the construction phase. Features • Tongue and groove construction. • Variety of thicknesses available including 2", 3", 4", 6" and 8". • Stiffener panels comprising the top, bottom and sidewalls of the panels are factory punched to reduce the through metal, thereby reducing heat transmission to the exterior surface of the panels. • Where possible, standard 27 ½" panels are used, providing a net width of 26". Panels can be made in a variety of widths up to 36". • Available in lengths up to 15', as well as custom lengths, upon request. • Standard 4 lb density semi-rigid/resilient insulation is provided, optional density's including 6 and 8lb can be provided. • Powder coated white ﬁnish is an available option when used for environmental rooms. Shipping • Panels are placed on their edges, palletized and secured with 2x4 banded reinforced framing for forklift unloading. Follow Us: Col-Met Engineered Finishing Solutions 2975 Discovery Blvd. Rockwall, TX 75032 Toll-Free 888-452-6684 eFax (972)-408-0881 Email [email protected] www.colmetsb.com CO-1004 Slotted channel design to reduce heat transfer from inner to outer surface.

Upload: others

Post on 18-Jul-2020

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Insulated Panels

Col-Met’s high-quality insulated panels are used in a wide range of applications including dry-off and curing ovens as well as environmentally controlled rooms. Insulated panels are constructed of 20-gauge prime aluminized steel and available in a wide range of thicknesses including 2", 3", 4", 6" and 8" based on application and insulating properties required.

Col-Met insulated panels are rigidly constructed utilizing “knuckle” punch for attachment of the top and bottom connecting panels and a “button” punch along the tongue and groove surfaces. This assembly process provides superior strength while protecting the cosmetic appearance of the panels.

Panels are shipped in a vertical orientation to facilitate the installation of insulation into the channel prior to interlocking the panels during the construction phase.

Features• Tongue and groove construction.• Variety of thicknesses available including 2", 3", 4", 6" and 8".• Stiffener panels comprising the top, bottom and sidewalls of the panels

are factory punched to reduce the through metal, thereby reducing heat transmission to the exterior surface of the panels.

• Where possible, standard 27 ½" panels are used, providing a net width of 26". Panels can be made in a variety of widths up to 36".

• Available in lengths up to 15', as well as custom lengths, upon request.• Standard 4 lb density semi-rigid/resilient insulation is provided, optional

density's including 6 and 8lb can be provided.• Powder coated white finish is an available option when used for

environmental rooms.

Shipping• Panels are placed on their edges, palletized and secured with 2x4 banded

reinforced framing for forklift unloading.

Follow Us:Col-Met Engineered Finishing Solutions2975 Discovery Blvd. Rockwall, TX 75032 Toll-Free 888-452-6684 eFax (972)-408-0881 Email [email protected] www.colmetsb.comCO-1004

Slotted channel design to reduce heat transfer from inner to outer surface.

Katerra CLT Product Definition...2020/01/16 · Format Lengths and Widths Cut from Master Panel Lengths 60'-0" 30'-0" 20'-0" 15'-0" 10'-0" 8'-0" Notes: 1. The subdivisions presented

Bespoke - Heat Mat · • Custom cold tail connection length • A choice of mat widths, although 500mm is the most economic option • Tailored lengths and overall sizes • Wattage

Radiant Linear Extruded Panels—Low Pressure Dropsweets.construction.com/swts_content_files/152146/445878.pdfRadiant Linear Extruded Panels—Low Pressure Drop 6 1Panel widths can

DATASHEET CATALOGUE · Coated and heat set, fire retardant woven polyester digital printing textile. internal Roll Widths 160cm, 250cm, 260cm, 320cm & 500cm Roll Lengths 50m & 70m

Maths Project Work. Rectangle: Area = Length X Width A = lw Perimeter = 2 X Lengths + 2 X Widths P = 2l + 2w Parallelogram Area = Base X Height a =

K-WALL PANELS · 1.2.3 Type and size K-Wall panels are produced in standard lengths, widths & thicknesses and in lengths to suit room height as per the details given below. Wall width:

THE NEW RNC MINERALSfilecache.investorroom.com/mr5ircnw_royalnickel/1348...1. All drilling intervals are down-hole lengths. Estimated true widths are expected to range 1. Estimated

Chapter 2eecs.oregonstate.edu/education/docs/ece111/Section2.pdf · CHAPTER 2. MATERIALS AND DEVICES 2.6Procedures In this section, different lengths and widths of conductive paper

TruGard Component & Replacement Parts · TruGard Component & Replacement Parts Optional, ... All panels and trim components packaged in 12-ft. lengths—Panels 13-inch wide exposure

TECHWORKS COLLECTION · 7. Bins Lockable overhead storage bins are available in 24”, 30” and 36” widths. Part Bin Panels, in 24”, 30” and 36” widths, attach to Organizer

In the following pages of this Introducing the profiles ...Lightweight panels which are approximately 1/3 of the weight of steel panels of similar form Panels in lengths of up to 7.3m