instrumentation engineer on contract full advt 18082014

Upload: sureshreddy1234

Post on 03-Jun-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/11/2019 Instrumentation Engineer on Contract Full Advt 18082014

    1/2

    OIL INDIA LIMITED, a Navratna Public Sector Undertaking is the pioneer and second-largest nationalupstream Oil and Gas Company with a pan Indian presence and growing global footprint. OIL is all set to

    conquer newer horizons of all-round growth and excellence. It is engaged in Exploration, Production andTransportation of crude Oil, Natural Gas and Manufacture of LPG with its field Headquarters at Duliajan,Dist.Dibrugarh, Assam.

    2.0 Oil India Limited intends to hire the following Instrumentation Engineers on contract basis for its on-land operations in Assam purely for temporary requirement. The contract would be for a minimum period ofsix months, extendable by three six months tenure upto a maximum period of two years depending uponrequirement and the performance of the individual. The details are given below:

    PostProjected

    Requirements *Educational Qualification

    Post QualificationExperience

    Remuneration

    InstrumentationEngineer on

    Contract03

    Graduate Degree inInstrumentation Engineering

    or Electronics &Telecommunication

    Minimum 03 (three)years of working

    experience

    A consolidated contract feeof `45,000/- plus `3500/-as accommodation

    allowance and `1,500/- asmedical allowance will be

    paid per month.

    * The projected requirements may change.

    ** The candidates should have minimum experience of 03 (three) years in any Govt./Public/Private sector organization of repute.

    3.0 Experience requirement, Job profile & responsibilities

    Skill and Post Qualification Experience:

    Minimum 3 (three) year(s) of working experience in maintenance, calibration, repairing & testing of

    both Pneumatic & Electronic Instrumentation in any Govt./Public/Private sector organization of

    repute.

    The candidates should have awareness on current development of instrumentation technology and

    knowledge of different codes & engineering standards as applicable.

    The candidate should be capable of reading & understanding the P&ID, PFD, System configuration

    drawings, wiring diagrams, loop drawings, cable layout & instrument installation & hook-up drawings

    etc.

    The candidate should be capable of doing fault finding in instrument control panels with electronic/

    pneumatic control logic and sequence control & safety shutdown devices.

    The candidate should have adequate knowledge of safety related instrumentation system used in

    hydrocarbon industries.

    Experiences on Advanced Instrumentation Systems like PLC (Programmable Logic Controller),

    Field-Bus Technology (FF, Profibus), SCADA, Distributed Control System (DCS) e.g. STARDOM/

    DeltaV/ AC800F, drilling rig instrumentation system etc. will be an added advantage.

    Job Profile:

    Attending instrument breakdown reports received from Oil & Gas installations with proper planning

    and record keeping utilizing optimum resources available in a cost effective manner.

    Preparation of preventive maintenance schedule of instrumentation systems and execution of the

    same in consultation with respective Sectional heads/ Installation Managers.

    Duliajan786 602, Assam

  • 8/11/2019 Instrumentation Engineer on Contract Full Advt 18082014

    2/2

    - : Page 2 :-

    Repairing, servicing, calibration & testing of pneumatic and electronics instruments on day to day

    basis in instrumentation workshops utilizing available test/calibration equipments and keeping test &

    measuring instruments of instrumentation workshops in good operating condition. Strict adherence to Safe Operating Procedures (SOP) including prevailing safety policy & practices

    of OIL and other statutory regulatory bodies like OISD, DGMS.

    Monitoring & control of inventory, stock & spares of various instrumentation systems.

    Requirement analysis, identification of suitable instrumentation system with proper technical

    specifications and installation & commissioning in field installations.

    4.0 Candidates meeting the above criteria may appear with original mark sheets, certificates andphotocopies of the same and 2 passport size photographs for a walk-in interview for engagement oncontract basis as per the details given below:

    Post Date Reporting time Venue

    InstrumentationEngineer on Contract

    03.09.20148:30 AM

    to9:30 AM

    Conference Room,Pipeline Headquarters, Oil India Limited,

    Udayan Vihar, Narengi, Guwahati,Assam - 781171

    5.0 Leave:

    The selected candidates shall be entitled for 15 days paid leave every six months which can beavailed to a maximum of 5 days at a time.

    6.0 General Conditions:

    No TA/ DA will be paid to the candidates for appearing in the interview.

    The engagement will not confer any right on the candidate for regularization in OIL.

    The candidates should be of sound health and have to provide a fitness certificate from a Govt.registered medical practitioner at the time of joining in the prescribed format.

    The candidate should have command over the local language as well as English.

    Any dispute with regard to the recruitment against this advertisement will be under the jurisdiction ofDibrugarh district court only.

    -----X-----