Platform Frame (Part A)

Leg Frame (Part B)

Platform Frame 1 PC.

Leg Frame (Left) 1 PC.

(LEFT)

Leg Frame (Right) 1 PC.

(RIGHT)

HARDWARE LIST

PART LIST

Care and MaintenanceThe care required for your new futon arm and frameis no different from any other piece of fine furniturein your home. A soft damp cloth will easily clean yourfurniture. Avoid excessive moisture (especially fromcondensation forming on cold drinks) and open flameor hot candle wax. As with all fine furniture, exposureto direct sunlight, over time, will lighten the finish.

Arms 2 PCS.

A1 Front 1 PC.

A2 Back 1 PC. A3

Cross Bars 2 PCS.

A5 Slat

4 PCS.

A4 Slat

3 PCS.

A5 A4

A4

A2

A1

A3

A3

B5

B4

B1 B2

C2

C1

C3

C4

C5

D2

D1

D4

D3

B3

B1 Left Front

1 PC.

B2 Right Fornt

1 PC.

B3 Right Back

1 PC.

Back Frame 1 PC.

B4 Lift Back

1 PC.

B5 Cross Bar

2 PCS.

Arm (Part C)

C1 Top Cross Bar

2 PCS.

C2 Front 2 PCS.

C3 Slat

6 PCS.

C4 Back

2 PCS.

C5 Bottom Crossbar

2 PCS.

Back Frame (Part D )

D1 Top Cross Bar

1 PC.

D2 Middle Cross Bar

1 PC.

D3 Left Leg

1 PC.

D4 Right Leg

1 PC.

RF40015 Hexagonal Wrench

1 PC.

RF10020Screws JCA 1/4” x 38 mm.

4 PCS.

RF10002Screws F6 x 1 1/4"

24 PCS.

RF10019 Screws F6 x 1"

4 PCS.

WD40154 Pin Wood

4 PCS.

RF10004 Screws F6 x 5/8"

14 PCS.

A5 A5

A5A4

CAUTION : Assembly required two or more persons. Avoid sitting beyond the legs when arms are folded down.

INSTRUCTION SHEET FUTON LOUNGER

Diagram 3.

Diagram 2.

Diagram 1.

Diagram 4.

(Right)

B5

B2

B3

B2

Leg Frame (Left) 1 PC.

(Left)

Leg Frame (Right) 1 PC.

(Right)

B5

B4

B1 B2

B3

Platform Frame 1 PC.

A2 A1 A1

A3 A3

A3

A5 A4

A4

A5 A5

A5

A4

A3

A5A4

A4

A5

A5

A5

A4

A2

C1

C1

C1C3

C4C5C2 C2

C2C5

Arms 2 PCS.

C2

C1

C3

C4

C5

D2

D1 D1

D2D3

D4

D3

Back Frame 1 PC.

D1

D2

D4

D4

Platform Frame (Part A)

Leg Frame (Part B)

Arm (Part C)

Back Frame (Part D )

Step 1 : Attach each slat (A4),(A5) and cross bar (A3) to the front piece (A1) and the back piece (A2) by using 8 pcs Screws F6 x 1 1/4" as per Diag.1.

Step 2 : Attach right front (B2), right back (B3) to cross bar (B5) and attach left front (B1),left back (B4) to second cross bar (B5) using 8 pcs Screws F6 x 1 1/4" as per Diag.2.

Step 3 : Attach front (C2) to the top cross bar (C1) using a screws F6 x 1 1/4", attach 3 slats (C3) to the hole inside cross bar (C1), attach bottom cross bar (C5) to front (C2) and 3 slats (C3) using a Screws F6 x 1 1/4", attach back (C4) to the top cross bar (C1) and bottom cross bar (C5) using 2 pcs Screws F6 x 1 1/4", making sure that the arm are correctly positioned.

Step 4 : Attach the top cross bar (D1) and middle cross bar (D2) to left leg (D3) and right leg (D4) using 6 pcs Screws F6 x 5/8", making sure that the hole are correctly positioned.

A

(Left)B

Step 8 : Your unit is now fully assembled. You may raise and lower the arms as shown in Diag 8.

Diagram 5.

Diagram 8.

D

A(Left) (Right)B B

Diagram 6.

D

A(Left)

B

C

C

(Right)B

Diagram 7.

Step 5 : Attach leg frames to the underside of the platform using 8 pcs Screws F6 x 5/8" See Diag 5.

Step 7 : Attach the arms to the platfrom with 4 pin wood and using 4 pcs Screws F6 x 1" to joint pin wood as arms.Making sure that the arms are correctly positioned. See Diag.7.

Step 6 : Attach back frame to the platfrom using 4 pcsScrews JCA 1/4” x 38 mm.Use the Hexagonal Wrench provided to secure the connections.See Diag 6.