instruction manual - forest river
TRANSCRIPT
10-inch touchscreen in-dashconcept usa inc.152 s brent circlewalnut, ca 91789www.conceptbuy.com1-888-830-1788
Instruction Manual
Concept xL-10
contents1. Specification comparison
2. Cables
3. apple carplay & android auto
4. Bluetooth Instruction
5. backup camera
warning:do not watch or play games while driving. Warnings must be followed to avoid serious bodily injury.
Backup Cameraconnecting camera to in-dash receiver
5
Power harness: • connect the brown wire (reverse trigger) to a power source.
power harness
rear camerainput
camera example(not included)
rear camera input: • connect the male rca to the female rca video output. • brown wire (trigger wire).
reverse trigger
brake wire
note: power steering wheel uses key-1 and key-2 wire.
4
Concept x - Specification comparison
panel size (1080p)
single din
android version
car play
android auto
mirror link
swivels
dsp
app store
x-8010.1’’ 10.1’’ 10.1’’
8.1 6.1
x-60 xl-10
1
Bluetooth instruction connecting phone to in-dash receiver (bluetooth)
phone: • tap on “Settings”. • tap on “bluetooth”. • turn on bluetooth. • pair to CAR-KIT. • enter 0000.
In-dash receiver: • open “bluetooth” app. • note the device name and pin code.
note: different model of in-dash receivers will be slightly different.
av cable
rear camerainput
Concept xL-10 - cables
2 13
USBpower
harness
Apply carplay / android auto instruction
apple phones • connect the apple charging cable from phone to the carplay usb port.
android phones • tap on “play store”. • download and install “android auto”. • connect the android charging cable from phone to the android usb port.
apple carplayAndroid auto
power steering wheel control • uses key-1 and key-2 wire • some vehicle require an interface to work with the pwc (power steering control)
apple carplayAndroid auto